OSB Split Jooins

hi all
i have one doubt,if you guys know this please respond.
Split-Join – branches from the main execution thread of the OSB message
flow by splitting the payload into a fixed number of branches according to the
configuration of the Split-Join at design time.
my doubt is in split join the payload is divided in to parts called branches , we are processes these submessages concurrently and then aggregates the responses into one
return message (join),in this case if any branch fails where it will go
1.whether it will go to the error handler to log error ,if we are handling any errror handler (or) it will process with based on other branches success response then it will return message (join).
which one is correct?
please suggest on this......
Thanks
bala

You need to implement a proper error handling mechanism otherwise the error from one node will propagate in the whole flow.
Please refer to the following blog to get more idea on fault handling in split join
http://www.rubiconred.com/blog/dynamic-split-join-in-osb/

Similar Messages

  • Aggregating output of two BS in OSB Split join

    Hi,
    i am using split join to invoke two BS and after the each invoke activity in parallel branch i have placed assign activity and assigning output variable of in voke to reply activity output variable response.parameter . However in o/p i am getting response of only one BS. can any one help on how to aggregating output of two BS in OSB Split join . my output is coming like this
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
    <soap-env:Body>
    <ns2:NewOperationResponse xmlns:ns2="http://www.example.org/SjWsdl/">output</ns2:NewOperationResponse> -------->this is o/p of one BS. But i want to display O/p of two BS
    </soap-env:Body>
    </soap-env:Envelope>
    thanks in advance..
    Edited by: 11207106008 on Jun 26, 2012 10:11 PM
    Edited by: 11207106008 on Jun 26, 2012 10:12 PM
    Edited by: 11207106008 on Jun 26, 2012 10:13 PM

    Suppose you saves the response of each BS in variables: $response1 and $response2
    then you need to configure the replace action after the parallel branch like this:
    Replace node content of . in variable <variable name of reply variable> with <Expression>
    Where you can provide in <Expression> a simple XQuery expression to combine the two variable contents. (Choose a root node of your choice, I have used AggregatedResponse)
    <AggregatedResponse>
    {$response1, $response2}
    </AggregatedResponse>

  • OSB Split Join Repeat Until Question On XPath Condition

    I'm trying to use OSB File Transport to stream a very large XML document file into a service which will split the file into very many small XML documents. So, given a file like:
    <BookStore>
    <Book></Book>
    <Book></Book>
    ... (many more books)
    </BookStore>
    In the split join I want to use a 'repeat until' to process each Book until there are no more Books in the BookStore. Here's my question: What is the correct XPath expression to use as the Repeat Until terminating condition? (I'm an XPath novice.)
    Thanks for your help!!!

    Hi,
    Based on what I understood, you should be using a for each loop with the conditions as follows:
    Within the Split Join flow
    for each ( counter variable from 1 to Count (xpath of book) ) --> For my example it was count($request.parameter/sjpoc:Orders/sjpoc:Order) replace this with your xpath.
    - do your logic
    Snapshot just in case @ http://dl.dropbox.com/u/19901533/sj_foreach_snapshot.JPG
    Based on this the split and join would happen for n (based on count) number of Book tags.
    Let me know if my understanding is incorrect.
    Thanks,
    Patrick

  • OSB SPLIT JOin How to verify it is working parallel

    HI ,
    I am using Oracle service Bus 11.1.1.3 and I have following Requirement
    PS 1 : Receives the request ,validates the input and calls proxyservice 2 (using publish action )
    PS 2[Sb ] :Receives the req from Proxyservice 1 queries a DB using the DB Dapater and obtains a list of subscribers for the request .
    Each item of the list contains information about the subscriber metadata(data format,JMS endpoint) .For Each Subscriber calls Proxyservice 3 which the subscriber meta data info and the actual request received .
    PS 3 [SB ]: Receievs the subscriber meta data and the actual request XML .depending upon the format specified in the meta data for the subscriber performs transformation(using xquery) and post the transformed xml to the subscriber specific queue [JMS ].
    Proxyservice 3 is common for all subscriber depending upon the metadata different Xquery needs to be called for different subscriber [this is achieved using Dynamic xquery ].
    My requirement is i need to call Proxyservice 3 in parallel for all subscriber .
    OSB doesnot out of the box provide action for spanning multiple threads of a PS from another PS .
    I have tried using Split join .Have created a Split Join which will loop through the list of Subscribers returned in PS2 and call PS3 for Each loop (have specified paralle =yes in split join ).
    How do I confirm that PS3 is called in parallel for all the subscribers .
    Is there any other way I could implement this requirement of spanning multiple threads ?
    Thanks a regards ,
    Yamini

    HI Abhinav ,
    Thanks a lot for the help .I had tried with adding log actions at various places.
    Added a log action as the first action of the for loop (split join )
    Start of PS3 and End of PS3 ..
    Please find some of teh readings .
    Reading 1
    for loop ******************************: 2011-09-01T16:24:12.825+01:00
    for loop ******************************: 2011-09-01T16:24:12.965+01:00
    for loop ******************************: 2011-09-01T16:24:12.965+01:00
    for loop ******************************: 2011-09-01T16:24:13.137+01:00
    progate Input Time Stamp ::::: 2011-09-01T16:24:12.965+01:00 ODM
    Progate Input Time Stamp ::::: 2011-09-01T16:24:13.028+01:00 oye
    Progate Input Time Stamp ::::: 2011-09-01T16:24:13.121+01:00 hade
    Progate Input Time Stamp ::::: 2011-09-01T16:24:13.199+01:00 PAM
    JMSSSSS Posting: 2011-09-01T16:24:13.043+01:00 odm
    JMSSSSS Posting: 2011-09-01T16:24:13.043+01:00 oye
    JMSSSSS Posting: 2011-09-01T16:24:13.137+01:00 hades
    JMSSSSS Posting: 2011-09-01T16:24:13.199+01:00 PAM
    Reading 2:
    Calling the SplitJoin: 2011-08-31T17:54:20.914+01:00
    ending the SplitJoin: 2011-08-31T17:54:20.929+01:00
    THE COUNT ******************************: 2011-08-31T17:54:21.662+01:00
    THE COUNT ******************************: 2011-08-31T17:54:22.021+01:00
    Prooooooogate Input Time Stamp ::::: 2011-08-31T17:54:23.254+01:00 odm
    Prooooooogate Input Time Stamp ::::: 2011-08-31T17:54:23.269+01:00 pam
    JMSSSSS Posting: 2011-08-31T17:54:23.285+01:00 odm
    JMSSSSS Posting: 2011-08-31T17:54:23.363+01:00 pam
    As far as my analysis goes PS3 is executed in parallel but it is not instantaited at one go (all threads in parallel ) .
    I am not able to conclude the level of parallelism achieved using Split join ..
    Do let me know if I am missing anything
    Yamini

  • OSB Split-Join problem

    I am a bit confused as to how to design a split-join via Oracle workshop for weblogic
    I have imported a WSDL and can define how to decode my incoming request so that I can issue multuple service requests via a Parallel node
    When I try to configure the Invoke Service node - I can't sem to reference anything other than the WSDL I started with ???
    I thought I was supposed to be able to access any other Business (or Proxy) service (or even another Split-Join)
    Don't know if this is clear enough for anyone to be able to help

    When you configure Invoke Service you can choose any WSDL-based business or proxy service operation. Under Input Variable and Output Variable tabs you set message variables of appropriate types.

  • Splitjoin invocation

    hi,
    I am getting this fault in osb split join while using Parallel to invoke three external sevices
    <faultcode>soapenv:Server</faultcode>
    <faultstring>
    BEA-380001: [subLanguageExecutionFault] [BEA-2031509] Executing an expression caused an unhandled fault: Variable 'pointsBalanceRequest' is being referenced before it has been initialized with a value.: Fault [{http://docs.oasis-open.org/wsbpel/2.0/process/executable}uninitializedVariable] [BEA-2031518] Variable 'pointsBalanceRequest' is being referenced before it has been initialized with a value.
    Executing Process Reference: GetLoyaltyMemberProfileOSB/splitjoin/v10/GetLoyaltyMemberProfileSplitJoin; instance ID: uuid:ea3018e377a427e6:-6824b51:1382c77d9c5:-7fc6; thread: Thread 6 (RUNNING); frame ID: lockHandler,15; location: 40 ({http://www.bea.com/wli/sb/stages/transform/config}assign [88,11]) - ENTER.
    </faultstring>
    Can anybody can share any URLS of how to hadle this.
    Expecting a reply from ASAP
    regards
    sri

    i assume the pointsBalanceRequest variable is the input variable of the business service you're trying to invoke in the split join?
    can you try 'filling' this variable before this invoke with an assign instead of a replace?
    http://www.xenta.nl/blog/2011/07/03/oracle-service-bus-implementing-aggregator-pattern-by-use-of-split-join/ maybe that one helps a bit too

  • For each sample example  in OSB without Split join

    Hi,
    Any body have sample example for For each in OSB without Split join......Thanks in advance

    I know this is an old thread, but I just ran into this same problem. Wow! That's a crappy 'feature'. I wasted 4 hours this morning on this thinking it was me doing something wrong in my xpath, but nope, you need to cast the counter to an int .......
    I hope they fix things like this in the next major release.
    Thanks for the solution.

  • Dynamic Split Join:Parallel flow using OSB

    Hi,
    I am implementing a dynamic split join in OSB,where in the for -loop i am invoking a database adapter.
    If I select parallel='yes' in the for-loop settings, I get a random number of records from the database as an output.
    While on the other hand, on running the for-loop sequentially, i get the exact number of records i am expecting.
    Could anybody figure out why is this happening?
    Regards,
    Tarun

    If I understand correctly, this is what you are doing:
    Configure a For loop based on a repeating element in source XML (for ex. for each customer id in xml message).
    Inside each loop you are making a DB lookup and getting one record for each element (for ex. customer details of each customer id)
    Finally you are aggregating them in the same variable (join)
    The problem that you see is that if you do it in parallel then you do not see details of all customers in the out variable?
    If yes, then can you please let me know how you are updating the details of each record in the out variable.

  • How to Split parameter in OSB(Proxy Service) ?

    Hi,
    i'm Newby in OSB.
    I get the WSDL from the target system, and the response from the wsdl that is lines with a separator / delimiter "|".
    Examples: getLOANKep.wsdl at invoke in SOAP UI and Business Services in OSB with the result:
    1|andri|19021985|jakarta|500000|aktif
    My question is, how do I break the line above in the "Proxy Service" to:
    <RefNo> 1 </ RefNo>
    <Full name> andri </ Full Name>
    <Date of birth> 19021985 </ Date of birth>
    <place of birth> jakarta </ place of birth>
    <loan limit> 500 000 </ loan limit>
    <status> aktif</ status>
    I need your help ASAP:)
    Regards,
    Leo regar

    Hi Prabu and Pierluigi,
    Does MFL is only required when you want to transform the XML into non-xml and non-xml to xml. ?
    Because, my question is , from a business service I get the results or response from the wsdl , So it's not a flat file but the XML result.
    1|andri|19021985|jakarta|500000|aktif --> Response from business Service on Test Console In OSB.(XML)
    So, how do I split from XML (business service) to XML (proxy service)? so the result as xml below:
    <RefNo> 1 </ RefNo>
    <Full name> andri </ Full Name>
    <Date of birth> 19021985 </ Date of birth>
    <place of birth> jakarta </ place of birth>
    <loan limit> 500 000 </ loan limit>
    <status> aktif</ status>
    Need your help :)
    Thank and Regard,
    Leo
    Edited by: user13144072 on May 9, 2011 2:46 AM

  • OSB message splitting

    Greetings to all!
    I'm a new guy to OSB and I have a problem. I Googled it for a couple of hours but didn't find any valuable solution. My only hope is you guys.
    I have a JMS consumer proxy service, which reads messages from Oracle AQ. The problem is that messages can be relatively large, and i can't influence that part of the system.
    My task is to route that messages further into IBM MQ.
    Is there any way to split my incoming message in to a bunch of messages no larger, than 100kb or 100row (for example) and send them separetly, so that consumer on the remote side then bring the message together (with correlation id, for ex.)?
    Appreciate all information. Thanks.

    Hi,
    Can you please elaborate below sentence.
    I have a JMS consumer proxy service, which reads messages from Oracle AQ.
    It's a JMS consumer PS , but reading from AQ?
    You can limit the number of messages, size of message etc using throttling or Work manager on queues, but to divide the message into two parts, you have to use SPLIT-JOIN inside the proxy service.
    PFB the link which may help you.
    http://www.rubiconred.com/blog/dynamic-split-join-in-osb/
    Improving Service Performance with Split-Join
    Thanks
    Richa

  • Calling two Business service using split join in osb

    Hi,
    While trying to call two business service using Split Join in osb i am getting selection failure message in Bpel em console. i am using invoke activity to invoke the BS and assign to assign the input. in the assign i am assigning *$request.payload/input* to input.payload . In the em console i am getting input like this
    receiveInput
    Jun 19, 2012 5:05:45 PM Received "process" call from partner "bpelprocess1_client"
    <payload>
    <inputVariable>
    <part name="payload">
    <client:process>xxxxx</client:process>
    </part>
    </inputVariable>
    Assign (pending)
    Jun 19, 2012 5:05:48 PM Error in evaluate <from> expression at line "65". The result is empty for the XPath expression : "/client:process/client:input".
    <payload>
    <client:process>xxxxxx</client:process>
    Jun 19, 2012 5:05:48 PM The following exception occurred while attempting to execute operation copy at line 63
    <payload>
    <bpelFault>
    <faultType>0</faultType>
    <selectionFailure/>
    </bpelFault>
    Jun 19, 2012 5:05:57 PM "BPELFault" has not been caught by a catch block.
    Jun 19, 2012 5:06:00 PM The transaction was rolled back. The work performed for bpel instance "650002" was rolled back, but the audit trail has been saved for this instance.If this is a sync request, please resubmit the request from the client. If it is an async request, please recover from the recovery console by resubmitting the invoke message.
    Can anyone help on this?
    Thanks in Advance...

    maybe this one helps a bit, it's the same pattern
    http://www.xenta.nl/blog/2011/07/03/oracle-service-bus-implementing-aggregator-pattern-by-use-of-split-join/
    if you're using a dynamic split join easiest way is to do something like
    assing <yourresponse/> to $response
    at this moment your assign an empty placeholder to the response variable
    now you go into the for-each looping and for each iteration you need to insert the response of your bpel call in the $response variable
    so in the looping as last step you add something like
    insert $mybpelresponse/rootelement into $response/yourresponse
    with the insert it will insert the reponse 1..x times into the $response variable (so actually aggregating all the responses for you)

  • Split joins in OSB

    Hi,
    Actually i do have a requirement where i need to call 2 business services simultaneously(in parallel) in OSB(Like using Flow activity in SOA) using split joins. Is it possible to call 2 business services parallely in OSB?
    Can any one please help me out with any blogs or steps that i can follow to achieve this.
    Your help is appreciated.
    Thanks,
    Naveen

    That is not entirely true. Split Join itself is based on single operation, i.e. the input to split join will be a single message, but within the split join you can invoke multiple services in parallel. You can either dynamically decide the number of parallel flows at runtime (similar to FlowN) or you can have static number of parallel calls (like Flow activity of BPEL) within split join.
    In case you want to call two business services in parallel, create a WSDL(if needed, in most cases you can reuse the WSDL of the Proxy Service itself for SplitJoin as well unless you are doing enrichment within Proxy before calling business services) for split join which has request message which contains data for both business services. Within the split join you can configure calls to both business services in parallel and you can also add transformations for each business services in respective branches.
    You can than aggregate the response from both services if needed and return that as a response of split join.
    Here is an example of Static Split Join:
    http://www.xenta.nl/blog/2011/07/03/oracle-service-bus-implementing-aggregator-pattern-by-use-of-split-join/

  • Split-Join, unable to set SOAP:HEADER in OSB at Invoke Service Component.

    Hi Experts,
        i created a Split-join for parallel processing and invoke third party services, but this service requires some mandatory elements in soap:header like WS-Addressing and, WSA-TO and some security infomation, but i don't know  how to pass header in invoke service step. Please help me to setup Header for Invoke services in split join.
    Please help me to resolve this issue.
    Thanks
    Ankit

    see this :https://forums.oracle.com/thread/951618
    not the most fancy way, but you can create some sort of  wrapper proxyservice in front of your business service to make it work

  • How to set SOAP Header When Calling Business Service (OSB) Using Split-Join

    Hi,
    We need to call WSDL based webservice which requires heading static content for successful call. As we need to call the same service parallely, hence we want to use Split-Join.
    Looked at couple of forum links, noted that we can't play with headers while working with Split-Join.
    For curiosity, just want to check any option other than using proxy as mediator in setting header information.
    Regards
    Venkata Madhu

    Venkata,
    You still have the option, if you hv n't tried this one.
    To enable this capability, you must declare the header parts along with the body parts in a single request/response message in the Split-Join WSDL and in the WSDL of the proxy or business services invoked by the Split-Join. With the message parts declared in the WSDLs, SOAP header content is available to Split-Joins in the request/response message variables.
    Following is an example of the message and binding definitions in the WSDL.
    Message
    <wsdl:message name="retrieveCustomerOverviewByIdRequestMessage">
    <wsdl:part name="retrieveCustomerOverviewByIdRequest"
    element="co:retrieveCustomerOverviewByIdRequest"/>
    *<wsdl:part name="serviceContext" element="sc:serviceContext"/>*
    </wsdl:message>
    Binding
    <wsdl:input>
    <soap:body use="literal" parts="retrieveCustomerOverviewByIdRequest"/>
    *<soap:header message="tns:retrieveCustomerOverviewByIdRequestMessage"part="serviceContext" use="literal"/>*
    </wsdl:input>
    hope it helps !!
    Regards,
    Abhinav

  • OSB example calling multiple business services using a single proxy service???

    Hi,
    I have three business services created using http urls i.e.
    1. LoginBS
    2. GetListBS
    3. LogoutBS
    My requirement is to get a list of names from GetListBS using a single proxy service and to call GetListBS I have to first call LoginBS then GetListBS i.e. after authentication and then finally logout.
    Kindly help with a detailed example for this and I am new to OSB.
    Thanks,
    Vik

    Hi Eric,
    Thanks for the response. We figured that it is possible to call multiple services with Split Join. However, we ran into the issue you described. We had a blocking call and had to wait until each of the services returned a response.
    However, we needed a Async model for our design and felt that this might not be a right fit.
    We are now looking at implementing the publish option with QoS configured as this fits our usecase better. Thanks for the help again.
    Rudraksh

Maybe you are looking for