OSB SSL configuration steps

Dear All,
I have a OSB proxy service and I want to enable 2 WAY SSL(Client authendication).
Can any one explain the steps to configure 2 WAY SSL to a proxy service?
where to configure the private keay and clients certificate etc...
Thanks

Please refer to Re: How to call https service from OSB
This has the high level steps. In case you still run into issues, please post them to the forum.
Thanks,
Patrick
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
https://forums.oracle.com/forums/ann.jspa?annID=893

Similar Messages

  • Need some hel in SSL Configuration in R12

    Hi All,
    I am facing challenges in configuring SSL in R12. I am not able to get bigger picture of the SSL Configuration. If any body does this before please share you knowledge
    Thanks in Advance.
    Reddy

    Hi Hussein
    The below are the steps I am trying to implement.
    Section 3 : Middle Tier Setup
    The default location for the wallet in Release 12 is $INST_TOP/certs/Apache. This directory contains a wallet with demo certificates. If you wish to use these certificates for testing start with Step 8 below to configure SSL
    Decided to test the application with demo certificates.
    Step 8: Update the Context File.
    Updated the context file as per the recommendations.
    Step 9 - Run Autoconfig
    Finished
    Section 4: Database Tier Setup
    Here I got confused. Whether to proceed or not ?
    Thanks
    Reddy

  • Changing SSL configuration on MedRec

    Hi,
    We are developing a custom Auditing Provider for WLS. Our provider needs to communicate via https to a remote system, and thus we need to configure SSL in order to use the correct client certificate and trust the remote server's.
    We are using the sample MedRec application bundled with WLS for testing purposes, but no matter what, we do not seem to be able to change the SSL configuration. We went to Home -> Servers -> MedRecServer(Admin) -> Configuration in the console, and then
    * Keystores
    * Custom Identity and Custom Trust + configure all the keystores pointing to our jks files
    * SSL: point to our alias
    But, when restarting the server, we see the following:
    <Mar 6, 2007 11:45:21 AM CET> <Notice> <Security> <BEA-090169> <Loading trusted
    certificates from the jks keystore file C:\dev\bea\WEBLOG~1\server\lib\DemoTrust
    .jks.>Which seems to indicate that somehow MedRecServer is not acknowledging our configuration changes.
    Our WL_HOME\samples\domains\medrec\config\config.xml looks like this:
    <?xml version='1.0' encoding='UTF-8'?>
    <domain xmlns="http://www.bea.com/ns/weblogic/920/domain" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/security/extension http://www.bea.com/ns/weblogic/90/security.xsd http://www.bea.com/ns/weblogic/90/security/xacml http://www.bea.com/ns/weblogic/90/security/xacml.xsd http://www.bea.com/ns/weblogic/90/security http://www.bea.com/ns/weblogic/90/security.xsd http://www.bea.com/ns/weblogic/920/domain http://www.bea.com/ns/weblogic/920/domain.xsd http://www.bea.com/ns/weblogic/90/security/wls http://www.bea.com/ns/weblogic/90/security/wls.xsd">
      <name>medrec</name>
      <domain-version>9.2.0.0</domain-version>
      <security-configuration>
        <name>medrec</name>
        <realm>
          <sec:auditor xmlns:ext="http://www.bea.com/ns/weblogic/90/security/extension" xsi:type="ext:secure-auditorType">
            <sec:name>Foo</sec:name>
            <ext:identifier>Test</ext:identifier>
            <ext:bea-audit-log-service-uri>hessian:https://it-sdm-nb:8443/ksuite/remoting/BEAAuditLogService-hessian</ext:bea-audit-log-service-uri>
          </sec:auditor>
          <sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
          <sec:authentication-provider xsi:type="wls:default-identity-asserterType">
            <sec:active-type>AuthenticatedUser</sec:active-type>
          </sec:authentication-provider>
          <sec:role-mapper xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
          <sec:authorizer xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
          <sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
          <sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
          <sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
          <sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
          <sec:name>myrealm</sec:name>
        </realm>
        <default-realm>myrealm</default-realm>
        <credential-encrypted>{3DES}I/3L8IhJVe+jq1vzXAXHODsFazm8NGROsfPVAaunGasgxJ6u41gpHbMAqA4pZSr2u1CWgoxiHR6z895y9Or+CDwkCmqAxJBq</credential-encrypted>
        <node-manager-username>weblogic</node-manager-username>
        <node-manager-password-encrypted>{3DES}HMxdWFl3juTr6BufJFg6WQ==</node-manager-password-encrypted>
      </security-configuration>
      <server>
        <name>MedRecServer</name>
        <ssl>
          <name>MedRecServer</name>
          <enabled>true</enabled>
          <listen-port>7012</listen-port>
          <server-private-key-alias>auditor</server-private-key-alias>
          <server-private-key-pass-phrase-encrypted>{3DES}tPlZGhoSkfnu0h93w1MeKw==</server-private-key-pass-phrase-encrypted>
        </ssl>
        <listen-port>7011</listen-port>
        <listen-address></listen-address>
        <key-stores>CustomIdentityAndCustomTrust</key-stores>
        <custom-identity-key-store-file-name>C:\dev\bea\weblogic92\server\lib\tomcat.keystore</custom-identity-key-store-file-name>
        <custom-identity-key-store-type>jks</custom-identity-key-store-type>
        <custom-identity-key-store-pass-phrase-encrypted>{3DES}tPlZGhoSkfnu0h93w1MeKw==</custom-identity-key-store-pass-phrase-encrypted>
        <custom-trust-key-store-file-name>C:\dev\bea\weblogic92\server\lib\tomcat.keystore</custom-trust-key-store-file-name>
        <custom-trust-key-store-type>jks</custom-trust-key-store-type>
        <custom-trust-key-store-pass-phrase-encrypted>{3DES}tPlZGhoSkfnu0h93w1MeKw==</custom-trust-key-store-pass-phrase-encrypted>
      </server>
      <embedded-ldap>
        <name>medrec</name>
        <credential-encrypted>{3DES}W+XDJAixeMZcbdmRm/jIF8u8ZMzBMLyGQpcjb1lWzlM=</credential-encrypted>
      </embedded-ldap>
      <configuration-version>9.2.0.0</configuration-version>
      <admin-server-name>MedRecServer</admin-server-name>
    </domain>You can see our Auditor provider configuration and the custom identity and trust sections, which look right.
    I'm wondering if somehow the demo application is special in any way, or if we are missing some step to change the identity and trust configuration. Any ideas? Any further investigation clues?
    Kind regards,
    Alex

    OK, we have been reading this:
    http://e-docs.bea.com/wls/docs81/security/SSL_client.html
    , so I think I need to make a few clarifications.
    Our Auditing Provider communicates remotely with another system using remoting libraries (in this case, the Hessian library), which open SSL connections in the "usual JDK manner". In fact, when handshaking, we see a failure that has a stack trace like the following:
    <Mar 6, 2007 3:59:36 PM CET> <Debug> <SecuritySSL> <000000> <Exception during ha
    ndshake, stack trace follows
    java.net.SocketException: socket write error: Connection aborted by peer
            at jrockit.net.SocketNativeIO.socketWrite(Ljava.io.FileDescriptor;[BII)V
    (Unknown Source)
            at java.net.SocketOutputStream.socketWrite0(Ljava.io.FileDescriptor;[BII
    )V(SocketOutputStream.java:???)
            at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
            at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
            at com.certicom.io.OutputSSLIOStream.write([BII)I(Unknown Source)
            at com.certicom.tls.record.WriteHandler.flushOutput()I(Unknown Source)
            at com.certicom.tls.record.handshake.HandshakeHandler.flush()V(Unknown S
    ource)
            at com.certicom.tls.record.handshake.ClientStateReceivedCertificate.hand
    le(Lcom.certicom.tls.record.handshake.HandshakeMessage;)V(Unknown Source)
            at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMes
    sage(Lcom.certicom.tls.record.handshake.HandshakeMessage;)V(Unknown Source)
            at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMes
    sages([BILcom.certicom.tls.interfaceimpl.ProtocolVersion;)V(Unknown Source)
            at com.certicom.tls.record.MessageInterpreter.interpretContent([BIILcom.
    certicom.tls.interfaceimpl.ProtocolVersion;)V(Unknown Source)
            at com.certicom.tls.record.MessageInterpreter.decryptMessage(II[BIILcom.
    certicom.tls.interfaceimpl.ProtocolVersion;)V(Unknown Source)
            at com.certicom.tls.record.ReadHandler.processRecord()I(Unknown Source)
            at com.certicom.tls.record.ReadHandler.readRecord()I(Unknown Source)
            at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete()V(Unk
    nown Source)
            at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake()V
    (Unknown Source)
            at com.certicom.tls.record.WriteHandler.write([BII)I(Unknown Source)
            at com.certicom.io.OutputSSLIOStreamWrapper.write([BII)V(Unknown Source)
            at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65
            at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
            at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
            at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.j
    ava:142)
            at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.
    java:344)
            at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLC
    onnection.java:32)
            at weblogic.net.http.HttpURLConnection.getResponseCode(HttpURLConnection
    .java:935)
            at com.caucho.hessian.client.HessianProxy.invoke(Ljava.lang.Object;Ljava
    .lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(HessianProxy.java:??
            at $Proxy0.startup(JLjava.lang.String;Ljava.lang.String;)V(Unknown Sourc
    e)
            at com.kroopier.bea.sap.utils.BeaAuditLogServiceSSLWrapper.startup(BeaAu
    ditLogServiceSSLWrapper.java:43)
    [/pre]
    I guess that the Hessian library opens up a connection, actually using these certicom classes and not the usual https ssl client classes and then I should configure client certificates accordingly in the Certicom thing, but I'm unsure how to do that.
    Any ideas?
    Alex                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • OIM11gR2 AD Connector SSL Configuration

    Hi,
    Can anyone provide me the steps to configure SSL between OIM - Connector Server - Active Directory ?
    We followed the steps provided in the AD Connector guide, but that does not seem to work. In the connector server logs, we see "SystemNotSupportedException: The certificate should be associated with private key". The steps we did were:
    1. Exported root certificate from AD Server
    2. Create sslstore on Conector server and updated connectorserver.exe.config file
    3. Enabled SSL in Connector Server ITResource.
    If you were succesfull configuring SSL, Please provide us the steps for the same.
    Thanks,
    Hrushi

    Hi GP/PK,
    Does that mean the trust certificate of AD is used for SSL configuration between OIM and Connector Server ?? I am not sure how this is gonna work. However, I have followed the steps in sections 2.3.2.2 to 2.3.2.4 in the link provided by you, but still I get the error posted earlier.
    Could you please list the steps for SSL configuration ???
    Also, Could you point me to the document which says Connector Server uses internal SSL to communicate to AD.
    Also, In our environment, connector server is installed on seperate machine and not on machine where AD is running.
    Thanks,
    Hrushi
    Edited by: 920194 on Sep 10, 2012 11:57 PM
    Edited by: 920194 on Sep 10, 2012 11:59 PM

  • Lion SSL configuration

    I am using Lion os on a Mac Book Pro. I have installed MySQL and I use the default mac Apache server. I have tried to config SSL in Apache. I have read many posts on the internet and tried many of them and followed their instructions step by step, but the SSL doesn't work on Lion.
    Any idea how to config Apache SSL?

    Hua,
    make sure that the entry under the alias is a key entry, not the trusted CA certificate
    entry.
    Pavel.
    "Hua Cao" <[email protected]> wrote:
    >
    Hi, Wajid,
    I have similar problems but it is with 8.1
    The bea server says 'no key/identity found in the key store file'. I
    checked the
    keystore using keytool. The specified alias is there for sure.
    If you find a solution, please share it with me ([email protected]).
    Thanks.
    Hua
    "Wajid" <[email protected]> wrote:
    While doing ssl configuration in importprivatekey utility iam gettin
    following
    error
    D:\bea\user_projects\mydomain>java utils.ImportPrivateKey d:\bea\users_projects\
    mydomain\mykeystore.jks null myalias myphrase myCert.pem upendra-key.pem
    Keystore file not found, creating it
    java.security.KeyManagementException: ASN.1: Lengths longer than 32bits
    are not
    supported
    at com.certicom.security.cert.internal.x509.SSLPlusSupport.getLocalIdent
    ityPartial(Unknown Source)
    at com.certicom.net.ssl.CerticomContextWrapper.inputPrivateKey(Unknown
    S
    ource)
    at utils.ImportPrivateKey.importKey(ImportPrivateKey.java:57)
    at utils.ImportPrivateKey.main(ImportPrivateKey.java:24)
    Please help

  • OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step

    Hi,
    I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
    Severe: Element Type:Domain
    Element id: null
    Operation result: failed to obtain domain file lock
    Detail Message: java.util.concurrent.timeoutException.Timeout;
    waiting for lock: Domain config lock;
    c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
    Step Distributing Repository failed
    Configuration Action 'Distributing Repository' has failed. Please check logs for details.
    Step Distributing repository failed
    I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
    I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
    I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
    Here is the snapshot of the log file which I could found.
    INFO: Current Inventory:
      Oracle Home: OraDb11g_home1
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1858390736
      This Oracle Home has not been changed in this session.
      Oracle Home: OH440082373
      This Oracle Home has not been changed in this session.
      Oracle Home: OH440082374
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1597391518
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1285215443
      This Oracle Home has not been changed in this session.
    INFO: Ending the inventory Session
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    Can someone please help me with this since I am stuck with for quite some time now.
    Is there any way to check in command prompt to check the locale as required by the system.
    What could be the issue here?
    Thanks,
    Nitin

    Hi all,
    We are able to resolve the above issue with the below solution.
    Root cause of the issue:
    You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
    Solution:
    1. Create a new directory called TEMP in a different location for ex: C:\TEMP
    2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
    3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
    4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
    5. Deinstall and re-install OBIEE 11g.
    Happy OBIEE 11g installation!!
    Thanks,
    Rajesh Gurram

  • Product costing by sales order configuration steps

    hi
    plz send me product costing by sales order configuration steps.
    sir, i know manufacturing order configuration step but i do not sales order configuration.
    in the sales order also is same as manufacturing order like first we have to make planning cost , the planning cost should be updated to material master and next configure the actual cost.
    for first step- costing variant -okkn
    next -costing variant -opl1
    for sales order also same we need to update planning price first- what is costing variant
    for actual cost - what is costing variant
    plz tell me detail
    regards,
    sowmya
    Moderator: Please, read forum rules before posting

    Hi Sashikanth,
       Please send me the Configuration document for make to sales order.We are at Blue print stage need some docment for make to sales order.Plese send me the document it will will be very help full for me.
    My id is [email protected]
    Thanks in advance
    Regards,
    Nagaraju
    Edited by: nagaraju sami on Mar 9, 2008 11:58 AM

  • Which driver to use in the BPM Configuration Steps?

    Hi,
    I´m in the BPM configuration steps and we will use BPM on a Weblogic Server, I´m in the step when you need to create to JDBC Data Sources for the Enterprise and Directory Databases, do you know which driver shoul I use? should it be XA o Non-XA?
    Thanx in Advanced!
    Kind Regards,
    Gerardo J

    Since there are no drivers, you can create your own, request one, use the Instrument I/O Assistant, or hope someone has one and posts it here. For help on creating one or requesting one, see the main Instrument Driver Network page. As long as you are familiar with the instrument and have the manual, creating a driver is not that hard.

  • Configuration steps for Extended Classic Scenario

    Hi All,
    Could you please let me know what are the configuration steps required for extended classic scenario.
    Thanks in advance

    Hi,
    Important Settings that Determine the Extended Classic Scenario
    The following settings are required for the extended classic scenario:
    u2022 At least one backend materials management system and accounting system is connected to the SAP SRM system and defined in the configuration setting Define Backend Systems.
    u2022 Product categories from the backend procurement system are replicated and used in the SAP SRM system.
    u2022 The target system for each product category is the backend system in the configuration setting Define Backend Systems for Product Category. Optionally, BADI BBP_DETERMINE_LOGSYS is implemented to determine the backend system.
    u2022 The extended classic scenario is activated in the configuration setting Activate Extended Classic Scenario. Alternatively, BAdI BBP_EXTLOCALPO_BADI is implemented to control the extended classic scenario based on customer defined rules.
    u2022 If the backend system is an SAP R/3 version lower than 4.6B, you must define local purchasing organizations and purchasing groups.
    u2022 If the backend system is an SAP R/3 version 4.6B or higher, you need to map the purchasing group used in the purchase order to the backend purchase group in one of the following ways:
    u2022 Use a backend purchasing organization and purchasing group in the shopping cart and purchase order.
    u2022 Use BAdI BBP_PGRP_FIND to determine a backend purchasing group in the shopping cart.
    u2022 If a local (created in SAP SRM without reference to a backend system) purchasing group and purchasing organization are used, then a valid backend purchasing group is assigned to the RFC user that created the backend purchase order. This assignment is made in the backend system using user parameter EKG in Transaction code SU01.
    u2022 Implement the user exit of the BAPIs BAPI_PO_CREATE1 (EXIT_SAPL2012_001 and EXIT_SAPL2012_003), and BAPI_PO_CHANGE (EXIT_SAPL2012_002 and EXIT_SAPL2012_004) to determine the purchasing group with a customer- specific logic.
    This is for your additional information.
    Hope this helps.
    Regards,
    Vikas

  • Configuration steps to create New Special GL

    HI,
    Can any one please send me configuration steps to create New Special GL. My client required to create new special GL for Rent Advance.
    NOTE: hear I am not asking how configuration steps for assigning GL accounts for existing Special GL. I want new Special GL to be Create for rent advance.
    It’s very urgent
    My mail id "[email protected]"
    Thank you
    mahesh

    Hi,
    go to transaction code fbzp where you assign GL account to the spl GL indicator.
    Go and create a new spl GL indicator there by clicking create new.
    Bye

  • Give me the Configuration steps  for intercompany billing and third party s

    Hi Gurus,
    Give me  the Configuration steps  for intercompany billing and third party sales and give me a brief description with examples.
    Regards,
    YSR

    Dear YSR
    Check the links
    [Cross Company Configuration|http://help.sap.com/bp_bblibrary/500/Documentation/J62_BB_ConfigGuide_EN_DE.doc]
    [Third Party Without Shipping Notification|http://help.sap.com/bestpractices/BBLibrary/html/J55_ThirdPartyWOSN_EN_US.htm]
    Third party order processing is as follows:
    Assume three companies X, Y and Z
    X - The company,
    y - The customer
    Z - Vendor
    When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
    If he is procuring the goods, there are two methods that are generally followed:
    Method 1)
    After receiving the PO from Y, X creates a sales order against Y.
    Now at the same time he also creates a PO to a vendor Z to produce the goods
    Z produces the goods and supplies to X
    X receives the goods from Z
    Then X delivers the same goods to Y.
    After that X invoices Y and Z invoices X.
    Note : Here there is no direct/ Indirect relation between Z and Y.
    This process is known as Trading Process. and the Material here is created  with Material type HAWA.
    The other method is a Third party order processing method:
    Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
    X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
    Now Z supplies the material to Y and acknowledges the same to X.
    Z  will send a copy of delivery acknowledgement and invoice to X.
    After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
    The next step for X  is to create an invoice and submit to Y
    Only after the invoice verification document is posted  then only X can create an invoice for Y.
    This is the business flow that is followed for third party order configuration.
    There are few steps that have to be configured to enable the system to function as mentioned above.
    Step1)
    If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
    The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
    if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
    Step 2)
    the item category in the order should be manually changed as TAS.
    For that you need to confugure the item category determination
    ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
    OR + NORM +      +       = TAN . + TAS
    OR + BANS +       +       = TAS
    Step 3)
    make sure that during the item category configuration for TAS  you need to mark relevnat for billing indicator as F
    Step 4)
    The schedule line cateogry for this type should be CS.
    make sure that you mark  subsequent type as NB - purchase requisition  in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
    thanks
    G. Lakshmipathi

  • PI 7.31 Dual Stack SSL configuration

    HI Gurus,
    I have a quick query, I am configuring SSL on my PI 7.31 systems.
    I have checked all the standard guides and forums but I have one doubt.
    Q1 - Is it necessary to configure SSL both in ABAP and JAVA side ?
    Q2 - If I just configure SSL in STRUSTSSO2 in ABAP , will it be more than enough ?
    Q3 - In what cases do we need to configure SSL in JAVA side ? And does configuring SSL in JAVA mandatory require sapcryptolib files ?
    Please share your views.
    Cheers, SG

    I want to understand is it necessary to configure SSL in both ABAP and JAVA in case of dual stack PI ?
    >>> Please refer to Huseyin's comments in the below thread..
    PI 7.3 Dual Stack SSL configuration
    In what cases do we use JAVA SSL in Dual stack system ?
    >>> AFAIK - when you use http_aae adapter/soap with https then you should configure the SSL on java stack.

  • Business partner configuration steps in treasury

    Reqiure Business partner configuration steps in treasury.
    While creating business partner i get the message :Personal address doesnot exist.
    How to rectify this?

    No reply.Closed.

  • Error at DB downtime configuration step in SAP installation

    Hello Gurus,
                  While installing CRM IDES  5.0 I am stuck at DB downtime configuration (step 9). After shutting down MSSQL server services are not automatically started. In usual case it should be. Its giving "could not start the MSSQLSERVER" service on host. And my MSSQL services are not starting either it is giving Named pipes provider, error:40 - could not open a connection to SQL Server. If any one faced similar kind of problems sugguest on this.
    Regards,
    Murali

    Check your event log why your database is not coming up.
    Markus

  • GC install fails on OMS Configuration step with NodeManager

    I'm trying to install OEM Grid Control and I'm having some problems getting past the OMS Configuration step in the installation. I'm not very familiar with Oracle products. I've completed all the configuration steps listed in the documentation and in order to resolve an earlier problem, I deleted the Keynectis and Telesec certificates from the cacerts java keystore. NodeManager is being run as a service, though I think the configuration process is launching a new instance because it can't connect to the service. I've also been unable to connect to the service through the WLST nmConnect function, though it's possible my parameters are incorrect. If the only problem is that GCDomain is not registered in the nodemanager.domains file, I'm not sure what I'm doing wrong, because I put it in the nodemanager.domains file located at C:\Oracle\Middleware\wlserver_10.3\common\nodemanager:
    #Domains and directories created by Configuration Wizard
    #Fri Apr 22 15:23:16 EDT 2011
    wl_server=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\wl_server
    medrec-spring=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec-spring
    GCDomain=C\:\\Oracle\\gc_inst\\user_projects\\domains\\GCDomain
    medrec=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec
    note - the file paths are correct and use escaped slashes where appropriate, but this message board system is turning the last double backslash into a line break. I can't find any html solution that works, so just take my word for it
    I restarted NodeManager after making the change as well. Any help would be appreciated. Thanks.
    Details:
    Machine - Windows Server 2008 x64
    DB - 11gR2
    WLS - 10.3.2
    GC - 11.1.0.1
    Install Log:
    FINE: Connecting to Node Manager ... Apr 22, 2011 3:23:19 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: <Apr 22, 2011 3:23:19 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.> Apr 22, 2011 3:23:19 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: <Apr 22, 2011 3:23:19 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.> Apr 22, 2011 3:23:19 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: <Apr 22, 2011 3:23:19 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.> Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: This Exception occurred at Fri Apr 22 15:23:20 EDT 2011. Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: weblogic.nodemanager.NMConnectException: Connection refused: connect. Could not connect to NodeManager. Check that it is running at win2008x64-2:7,401. Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.PlainSocketImpl.socketConnect(Native Method) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.net.Socket.connect(Socket.java:525) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.lang.reflect.Method.invoke(Method.java:597) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyReflectedFunction.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyMethod.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyObject.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyObject.invoke(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx2.nmConnect$3(<iostream>:118) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx2.call_function(<iostream>) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyFunction.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyObject.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx41.startNM$1(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py:20) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx41.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyFunction.__call__(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx39.f$0(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py:74) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.pycode._pyx39.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyTableCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.PyCode.call(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.core.Py.runCode(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at org.python.util.PythonInterpreter.execfile(Unknown Source) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.management.scripting.WLST.main(WLST.java:131) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at java.lang.reflect.Method.invoke(Method.java:597) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE:      at weblogic.WLST.main(WLST.java:29) Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Fri Apr 22 15:23:20 EDT 2011 Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Node Manager is down starting it Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Not connected to Node Manager Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Launching NodeManager ...
    Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Properties: {ListenAddress=win2008x64-2,ListenPort=7401,NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239,StartScriptEnabled=true,StartScriptName=startEMServer.cmd,}
    Apr 22, 2011 3:23:20 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Command: C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin\javaw.exe -classpath "C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\rt.jar;C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\i18n.jar;C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_oepe1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\lib\ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Oracle\Middleware\oms11g\sysman\jlib\emConfig.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl2.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dms_11.1.1\dms.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xmlparserv2.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xml.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.common_11.1.1\wsm-pmlib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.common_11.1.1\wsm-policy-core.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.common_11.1.1\wsm-secpol.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.common_11.1.1\wsm-dependencies.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.wsm.policies_11.1.1\wsm-seed-policies.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\orawsdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\mdds.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\ws_confmbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\ORACLE~1\..\modules\javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\..\modules\javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\..\modules\javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxframework.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxspi.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share.ca_11.1.1\adf-share-base.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share.ca_11.1.1\adf-share-ca.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\adflogginghandler.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\adfsharembean.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\commons-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\jsp-el-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.adf.share_11.1.1\oracle-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\auditwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\sslconfigwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\oamap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\ossoiap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.auditprovider_11.1.1\jps-wls-auditprovider.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-manifest.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-mbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-upgrade.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-patching.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar" weblogic.NodeManager "-v"
    Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:21 PM> <INFO> <Loading domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains> Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:21 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Loading domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:21 PM> <WARNING> <Domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains> Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:21 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap Apr 22, 2011 3:23:21 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: WARNING: Domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains Apr 22, 2011 3:23:22 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:22 PM> <INFO> <Loading identity key store: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true> Apr 22, 2011 3:23:22 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:22 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig Apr 22, 2011 3:23:22 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Loading identity key store: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:23 PM> <WARNING> <Node manager configuration properties file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using default settings.> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM weblogic.nodemanager.server.NMServer <init> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: WARNING: Node manager configuration properties file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using default settings. Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:23 PM> <INFO> <Saving node manager configuration properties to 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties'> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM weblogic.nodemanager.server.NMServer <init> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Saving node manager configuration properties to 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Node manager v10.3 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Configuration settings: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenAddress=win2008x64-2 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenPort=7401 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenBacklog=50 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: SecureListener=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: AuthenticationEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NativeVersionEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: CrashRecoveryEnabled=false Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: JavaHome=C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StartScriptEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StopScriptEnabled=false Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StartScriptName=startEMServer.cmd Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StopScriptName= Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.log Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogLevel=INFO Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogLimit=0 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogCount=1 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogAppend=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogToStderr=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogFormatter=weblogic.nodemanager.server.LogFormatter Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainsFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainsFileEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StateCheckInterval=500 Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: QuitEnabled=true Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Interface= Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NetMask= Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: UseMACBroadcast=false Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainRegistrationEnabled=false Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Domain name mappings: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:23 PM> <INFO> <Secure socket listener started on port 7,401, host WIN2008x64-2/192.168.182.135> Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Apr 22, 2011 3:23:23 PM weblogic.nodemanager.server.SSLListener run Apr 22, 2011 3:23:23 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Secure socket listener started on port 7,401, host WIN2008x64-2/192.168.182.135 Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Successfully launched the Node Manager. Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: The Node Manager process is running independent of the WLST process. Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Exiting WLST will not stop the Node Manager process. Please refer Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to the Node Manager logs for more information. Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: The Node Manager logs will be under C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 Apr 22, 2011 3:23:30 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Connecting to Node Manager ... Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: <Apr 22, 2011 3:23:41 PM> <WARNING> <Configuration error while reading domain directory> Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: weblogic.nodemanager.common.ConfigException: The domain 'GCDomain' at 'C:\Oracle\gc_inst\user_projects\domains\GCDomain' was not registered in the nodemanager.domains file and dynamic domain registration is not supported. Please register the domain in the nodemanager.domains file. Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:257) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at weblogic.nodemanager.server.Handler.handleDomain(Handler.java:224) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:108) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at weblogic.nodemanager.server.Handler.run(Handler.java:70) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess:      at java.lang.Thread.run(Thread.java:619) Apr 22, 2011 3:23:41 PM oracle.sysman.omsca.util.ProcessOutputReader run
    ...

    I have a JDK already installed, but isn't JRockit being used by NodeManager in this case? Does NodeManager need to run on the JDK?
    Regardless, I tried changing JavaHome in the nodemanager.properties file to the JDK/jre directory, but the log file still has the original path. The log seems to indicate that the process thinks that NodeManager is down because it can't connect, so it launches a new instance and uses default configuration parameters, which naturally wouldn't have my changes to the nodemanager.domain or nodemanager.properties files.
    Also, the log says it can't connect to NodeManager at win2008x64-2:7,401. I'm not sure why there's a comma in there, but by the time this configuration step fails, there is a javaw.exe process listening on port 7401 and if I retry the step without killing it, the step will fail earlier because the port is already bound.

Maybe you are looking for