OSB: The different between transportation layer and security layer

Dear All,
Do you have any idea for compare about security on service bus between transportation layer and message layer?
Which one is better? And do you have any factor to consider which one I should use?
Best REgards,

If you are working with OSB 11g, please refer -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/part_sg.htm#sthref1029
Ofcourse you would like to have both of them if you want a healthy system. If your OSB services are internet facing then it is a sensible decision to have both transport (a bare minimum) & message security. If your services are exposed to a LAN/WAN then you may have either or both of them. Remember, securitiy processing is always an overhaed to the performance so should be used as and when required only.
Regards,
Anuj

Similar Messages

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

What is the different between adobe reader and adobe acrobat reader?

what is the different between adobe reader and adobe acrobat reader?What are the procedure to download a Acrobat reader?

Good day,
Adobe Reader is a free application we offer for viewing and printing PDF files. Many years ago, it was known as Acrobat Reader. You may still see some users refer to Adobe Reader as 'Acrobat Reader'. Old habits are sometimes hard to break!
You can download Adobe Reader by visiting: http://get.adobe.com/reader/
Kind regards,
David
Adobe Systems

What is the different between Photoshop element and Photoshop CS 6?

What is the different between Photoshop element and Photoshop CS 6?
Which version is latest Photoshop CS 6 or Photoshop CS 8?
Can Photoshop CS 6 & 8 compatible with Window 7 or Window 8.1?
What is the different between Photoshop Element and CS 6 ?

They are two entirely different and separate applications, each one with its own separate and independent development and engineering teams.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve. It has a bunch of features that are absent in Elements.
Elements, on the other hand, is a simplified application lacking much of the power and refinements of Photoshop proper, but it has hand-holding features designed to appeal to amateurs and beginners.
If your needs are not complicated, Elements may just be the ticket for you.
Please realize that you are not addressing Adobe here in these user forums. We are users just like you. Personally, I have no connection to Adobe.

Wat is the different between AP set and ORI set?

i fedup about wan buy AP set or ori set... because AP set is cheaper but i scared AP set spoil more easily, i also heard people say AP set camera and sound system is different with ori set.... guys kindly please tell me wat is the different between AP set and ori set and izit same to buy AP set and ori set?THX YA ^-^....
Message Edited by geronimo on 24-Mar-2008 06:29 AM

Thanks YuliaKlimov, I can reproduce this issue, but I cannot explain the different behaviors between SSAS 2008 and 2008R2. As a workaround,
could you try to use dynamic set or create statics set but with fixed member for example:
CREATE
SET CURRENTCUBE.[Prior Month] AS
[Date].[Date Key].&[20050723].PrevMember
, DISPLAY_FOLDER = 'Relative Period Sets';
Personally, I think your set is dynamic set, because the currentmember is changed base on current selection. You can also submit this issue
on below official link to get confirmation from Product Group:
https://connect.microsoft.com/SQLServer/
Thanks,
Raymond
Raymond Li - MSFT

(EarPods) What is the different between MD827ZM/A and MD827ZM/B?

Hi Comunnity,
i have a question about EarPods.
what is the different between MD827ZM/A and MD827ZM/B?
best regards,
Kita13

It appears that the A is US version and B is UK,
No technical difference just country of sale.

Whats the different between iphone 5s and 5c

whats the different between iphone 5s and 5c

Primary differences are:
Aperture, flash, stabilisation and shutter speed of the camera.
Processor type and the inclusion of a 'co-processor' for movement sensors.
Materials used for the frame and outer shell.

Whats the different between regular strems and buffered streams?

Hum , Hey.
Whats the different between regular streams(un buffered) and buffered streams?
When should I use buffered streams and when should I use buffered streams?
Thanks in advance !

Gonen wrote:
CeciNEstPasUnProgrammeur wrote:
Heck, I often asked myself that, too. If only there were any documentation for those classes one could read...
The buffer allows the stream to read a whole chunk of data, even though your program requests it one byte at a time. Reading larger chunks from a file e.g. is much faster than trying to read single bytes. Especially considering that usually, a whole cluster is read and you'd discard all but one byte, and then repeat the same...so if the buffered is faster . why there is un buffered streams?Lots of reasons. Maybe you're sure you're going to send or receive all the data in one transaction, so you don't want to waste memory on another buffer. Maybe you're sending data to a device that requires real-time input, like a robotic arm.

What is the different between mb11, mb1b and migo ?

Hi all,
What is the different between the following goods movement transactions-
MB11
MB1B
MIGO
Regards,
Yinyan Lu

Dear Lu,
In my understanding MB11 and MIGO can be used for a transfer posting or goods issue or goods reciept against any order or
for reversal of good's movements.Means it can be used for 101,102,261,262,311,312 etc.
But in MB1B,only transfer postings can be performed like transfer posting from one plant to another or one storage location to
another like 301,311,or 302,312,or to convert from one material to another using 309 movement,or to transfer the quality stock
to unrestricted stock using 321 movement can be performed.
Regards
Mangalraj.S

What's the different between an Operation and a Method?

Hello,
I am wondering about the difference between operations and methods.
For example, if I am listing the operations of a stack, I would say:
1) Construct and Destroy
2) Push
3) Pop
4) Top
5) Empty
6) Clear
...but are some of these methods just method and not operations?
Again, for example if I am listing the operations for a Queue, I would say:
1) Enqueue
2) Dequeue
3) Head
4) Empty
5) Clear
...but as some of these methods are not unique (i.e. 4, 5 & 6 are the same for queue as it is for stack) then are some of these methods just methods and not operations?
Yours confused,
Wood

Ahem: "If formally, what are their definitions?"
Feel free to consult the JLS: [http://java.sun.com/docs/books/jls/third_edition/html/j3TOC.html]
There is no definition or use of "operation" as you seem to be plying it, in the JLS. Note that constructors are not methods, according to the JLS definition of method.
On the other hand, if asked a question on an exam, I wouldn't stick to wooden definitions. I would use commonsense.

What's the difference between transport request and change request

Hi, I am reading TMS part of TADM12-1 now, and confused about two terms mentioned in this book, transport request and change request.
Is there any difference with them? Please advise. Thanks
James

In the context of course tadm12 transport request = change request

What are the different between Netflow protocols and Real Time Capture

Hi Gurus,
Let me know, if you have a link will be excelent, the different if we capture traffic in Real Time (using Spam Port) or export traffic by Netflow protocol.
When I capture traffic and analysis it (using Wireashark or TCPDump) in Real Time I see in detail all data, but in Netflow I see statistic?
Any other tip or link where could explian in detail, please?

Capturing packets via a span port and inspecting with Wireshark or any pcap analysis tools is looking at actual datagrams - the details are much more indepth and detailed and you are not missing anything. You see the actual IP conversations.
NetFlow captures the header information from each of the IP conversations traversing your networking device and allows for flow analysis tools to decipher them and display the results. With NetFlow, each IP conversation is represented in a flow with information about its source and destination IP Address, port numbers, protocol, ToS, etc. Now remember, NetFlow is not all sampled - It captures all the IP conversation information. There is also sampled NetFlow like Seb stated in the previous reply, but not all NetFlow is sampled. You can enable sampling to capture 1 in 100 packets or 1 in x packets.
A simpler way to put it is, consider a phone call. Packet capture is like knowing who called whom, how did they call, what did they use, when did they call and also get to know what did they talk about.
NetFlow is like your phone bill - you know who called whom, when it happened, how long they talked, etc., but you do not know what did they talk about.
If you have a resource intensive network, capture NetFlow from all the nodes and do spanning from the most important interfaces.
Regards,
Don Thomas Jacob
http://www.solarwinds.com/netflow-traffic-analyzer.aspx
NOTE: Please rate and close questions if you found any of the answers helpful.

Can someone tell me what's the different between Inspire T3030 and T3100? Which is better?

Hi, I am considering to buy T3030 and T3100, which one is better if they are at the same price?
Are they better than x230 by logitech?
Thanks
Message Edited by ahtze on 04-14-2007 08:08 PM

is there any advantage for the purchased one ??
Other than the fact that it's the ethical thing to do, that using any copy for which you have not obtained a legal license is a criminal copyright violation in almost very country in the world, and that legally purchasing your copy is the only way in which you would get any support from Apple? I would consider those all "advantages", myself.
Regards.

What's the different between 2.3GHz and 2.6GHz?

Is going to be a noticable difference? or I just need 16gb of RAM. And what exact improve from 2.3GHz to 2.6GHz? which part gonna faster?

The most CPU-intensive operations will be up to 13% faster. Overall, the speed difference will be smaller because many operations aren't very processor-intensive. In day-to-day usage, the difference for most users is likely to be perceptible but not impressive.

Diff. between transport route and transport layer

hi gurus,
What is the Diff. between transport route and transport layer.
Regds:
BBR.

No interview questions
Read the "Rules of Engagement"
regards
Juan

OSB: The different between transportation layer and security layer

Similar Messages

Maybe you are looking for