OSB Transformation Support in Web Based Console

Hello,
I would like to map/transform from one format of XSD to another format of XSD.
Should we proceed this way
Step 1: Load both Source format (XSD) and Target Format (XSD) in weblogic workshop
Step 2: Do the mapping
Step 3 : Use the generated XSLT and load it as a resource in Osb web-based console.
Is this the recommended approach ?
Thanks

*"Does anyone know how to do this successfully? "*
You can't. That is not an option with OWA.

Similar Messages

Does the UC540 include or support a web based user portal?

One last question because I can't find this for the life of me. When looking at Avaya IP Office they include a web based portal that is installed on a server or on their server module for the system. Does the UC540 include that or allow that function at all? Basically I'm trying to find out if it includes or supports even via add on a user portal where users can log in, see their call history, listen to voice mails, possibly see who is on the phone, and if possible change their call flows from there. So for example set that they are working from home vs the office. Is that built in or supported or anything at all? Thanks so much!

The thing I'm just not clear on is what the UC540 includes, as I'm comparing it to Avaya IP Office which seems easier to understand. A user portal isn't that big of a requirement but I'm more wondering how it works for teleworkers or mobile twinning as Avaya calls it.
For example, one place says buy the UC540 for $1899. Just using it as an example, lets say I was to buy that.
Am I able to set it so that:
1) If working remotely, calls ring on my desk and mobile at the same time, like Avaya's mobile twinning? And if so, is it something users can enable or disable easily, either from their phone, or a web portal etc?
2) If I am on the road, Avaya has the one-x iPhone application, where you launch it, dial a number, it calls into the Avaya PBX, and makes an outbound call showing it's my office calling. So basically DISA. I don't need an application for that, but does the UC540 support calling into it and dialing out so it shows the office line calling?
3) Last and most importantly, does it include built in any ability for a softphone so that a user can work from home one day, launch the softphone on their laptop with a USB headset and then make calls and have incoming calls ring there as well?
We use Asterisk, so we can do the above right now but it's not really pretty. Like option 1 above is possible and easy to do. Option 2 is so so, it's def not as easy as the one-x app by Avaya. Instead users have to call our main line, dial a code at the IVR and then get an outbound line that shows their caller ID. So each user needs that manually set up in the system, it's not a built in feature. Then option 3 is possible but also not ideal as the soft phone needs its own extension and then ring groups are needed to ring their line to all their extensions etc.
Just comparing the Avaya to Cisco and I'd REALLY prefer the Cisco it's just the Avaya seems to handle the above better which is our main features we want so just trying to determine if the UC540 can do this out of box and if not what I'd need to enable it. Thanks!

Changing resolutions available in web Template Console

Most of our Sun Ray 3 devices are connected to monitors running at 1600x900, which isn't one of the "built in" resolution options. I saw in How to set custom resolution list in the VDI selector ? how to change the resolutions listed in the Desktop Selector. That was helpful. But I only see 1024x768 and 1280x1024 options in the web-based Console. I'd love to be able to set 1600x900 as an option here, so when we set windows and such up in the Template Console, those are reflected in the cloned desktops. Additionally, if the resolution doesn't match right, at the "press ctrl-alt-del" window, you get a sort of "letterbox" look. Is there any way to change the resolutions in the Desktop Console?
Charles

Hi,
I have now seen that it is possible to create an ABAP class with superclass CL_RSR_WWW_MODIFY_TABLE and override the method SCALING_FACTOR_CELL.
then I should fill in this class in the param-tag in the html.
BUT this is only possible in System 3.5, but not anymore in 7.0! Everywhere I can just find the sample coding for 3.5, but nothing for how to do this in BI 7.0...
So does anybody know, how I can use external ABAP classes as "user exits" in BI 7.0?
Thank you for your help!

Error accessing Infoview and web-based Administration Console

Post Author: rsir
CA Forum: WebIntelligence Reporting
After installing Business Objects 6.5.1 with SP3 in a single server as a primary node, everything works fine, except for the InfoView (wiasp) interface and the web/based administration interface (wiadmin). We've investigated in the BusinessObjects support site and in many forums about the problem and tried every single possible solution in order to correct the problem, without success.
The system we're working on is this:
Server model: Hewlett-Packard BLADE series BL 460C
OS: Windows 2003 SP1
Web Server platform: IIS6
What happens is that when we try to log in to infoview in the welcome screen, the url changes to:
http://(servername)/wiasp/scripts/login/webiStart.asp
And it displays the "The page cannot be displayed" error.
Also, when trying to log in to the web-based administration console (the client version works fine), it displays this error:
"The system is not started (Error: ADC 00071)"
We've tryed enabling parent paths in the IIS, redeploying the cluster node throught the configuration tool, checking the web extensions to be allowed, etc. without success.
Thank you very much in advace for any help.
Roderic Sir

Post Author: sarika_us
CA Forum: WebIntelligence Reporting
Hi,
I am facing the same problem. Could you please tell me how you resolved it.

Is there a web based tech support?

Is there a web based tech support, or is the disscussion forum it? I need a tech to tell me why there is static in my burned itunes cds.I don't think I am the only one and we are all stumped.

"*Is there a web based tech support, or is the disscussion forum it?*", asked the user in the support forums.
*why there is static in my burned itunes cds*
Set your burn speed to a lower setting (iTunes prefs -> Advanced - Burning).
Also, make sure you CD/DVD burner firmware is up to date.

Problem Starting the Web-Based Administrative Console

I have Installed Application Server 7 Platform Edition. Everything runs smooth. The Application Server and the Administrative Server got started perfectly. I checked both of these Servers and they are working perfectly.
The problem is that when trying to connect to the Web-Based Administrative Console.
I get the prompt to enter the Admin username and the password, once I have entered, it accepts but through the following message.
�Your Sun One Application Server License does not allow Remote Administration.
Please go to http://www.sun.com/upgradeas7 to upgrade your license.�
How can this happen because I am using the same machine where Application/Administrative Servers are running to get connected to Web-Based Administrative Console.

Hi,
May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
Aditya.

Web based administration console

Hi,
I know that a lot of folks have had problems running the admin server on linux, and thus can't run the administration console. As well, the administration console is not a good solution when the LDAP server(s) are on the other side of a firewall.
Is anybody here interested in having a web based administration console that allows you to do 95% of what you can do with the regular console? As well, it could offer some additional features.
I could develop and maintain such a system for Sun and the upcoming RH DS, if there is sufficient interest.
Contact me by clicking my handle, and using the email address.
podzap

Post Author: sarika_us
CA Forum: WebIntelligence Reporting
Hi,
I am facing the same problem. Could you please tell me how you resolved it.

Does Embedded OC4J has a web based admin console ?

Hi
Thank you for reading my post
does embedded OC4J has a web based admin console ?
i tried to open the /em context and it said that the page not found.
if it has no Admin console , it ir t possible to install an admin console for it ?
thanks

Hi,
yes, it has. You need to start embedded OC4J as stand-alone from the jdev-home\j2ee\home using the java -jar oc4j.jar command. You can then launch it and access it via port 8888 and issue
http:://....:8888/em
The embedded server does not use the enterprise manager screen because the configuration is kept in the JDeveloper_home\jdev\system...\j2ee...\embedded...\config directory
Frank

VMware server Console -- not the web based access

Dear All,
I want to install vmware server console to do Oracle RAC practice, So kindly let me know from where can I get the exe file to install it.
FYI , I installed Vmware server version2.0.2 but it's ( Web access infrastructure ) , and I don't want this version , I need the other one which it's an application not the web based.
Regards

Please have a look..
http://www.petri.co.il/virtual_install_vmware_server.htm
abirhasan

Message transformation supported in Oracle Service Bus.

hi,
please let me know the types of message transformation supported by OSB.
i have found that it supports xml to xml message transformation based on XQUERY and XSLT.
Can anyone please tell me if it supports message transformation from xml to flat, aml to ISO and vice versa.
Thanks in advance.

Apart from Xquery and XSLT (XML to XML transformation), you may use MFL in OSB. A Message Format Language (MFL) document is a specialized XML document used to describe the layout of binary data. MFL resources support the following transformations:
XML to binary—There is one required input (XML) and one output (binary).
binary to XML—There is one required input (binary) and one output (XML).
Each transformation accepts only one input and provides a single output.
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/mfls.html#wp1090749
http://biemond.blogspot.com/2008/12/flat-file-to-xml-with-oracle-service.html
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15867/mfls.htm#i1100502
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15866/intro_fb.htm#CHDCAHHA
Regards,
Anuj

Browser is no longer recognized by a web-based database after migration to FF17

Hi,
When trying to access a web-based data base thta worked fine with FireFox 16, I now got message: "Your Browser is not supported" at the place where an image loaded via a plugin (ChemDraw plug-in 12.0.2.1076) should load. This worked perfectly with version 16 and the plugin is still in place and not declared incompatible by FireFox. How do I modify the way FireFox announces it-self to the web site so that it is not declared incompatible...

Hi,
I tried and it works ! What I had to do was to downgrade to version 16, install the add-on, copy the configuration from there as a new User agent (which I called FireFox 16), then upgrade and then select the FireFox 16 user agent...
Amazingly enough, however, when checking the test (through the web site http://chrispederick.com/work/user-agent-switcher/features/test/ it says I have version 17 (Mozilla/5.0 (Windows NT 5.1; rv:17.0) Gecko/17.0 Firefox/17.0) aven though I selected my FireFox 16 (Mozilla/5.0 (Windows NT 5.1; rv:16.0) Gecko/20100101 Firefox/16.0).
I do not knwo exactly why the test does not work but the web site that needs FireFox 16 works ...

Client/Server to Web-Based application Conversion

Hi! Everyone,
I have couple of questions for you guys.
Our Client had recently upgraded Forms 4.5 to 6i to move from Client/Server based application to Web based application.
They are using Forms Server 6i Patch Set 1, OAS 4.0.8.1, Windows NT Service Pack 5 and Oracle 7.3. They are facing the following error every now and then, when they run the forms,
"FRM-92100: Your connection to the server was interrupted. This may be the result of a network error or a failure on the server.You will need to re-establish your session."
Please let me know what might be causing the above error. The only problem i can think about might be Oracle 7.3. If i am right only Oracle 8 and above supports Forms 6i.
Can anyone let me know some tips and/or techniques to upgrade Forms 4.5 to 6i. If there are any important settings/steps which we might have over looked during the upgrade, please list them.
Any kind of help is greatly appreciated.
Thanks,
Jeevan Kallem
[email protected]

Most of the code is use with no changes at all.
See otn.oracle.com/formsupgrade
Regards
Grant Ronald

How to integrate web based application to windows based application

Hi,
Experts,
we developed web based application in this when we raising
invoice document after adding this we need to updated Amount
in integratee SAP B1 then that Amount we need Update The
Amount in OACT Table how we can Update in Amount Field
in OACT Particular Account Code. plz Guide me. and how to
integrate web absed application to windowbased application
plz help me.
Regds,
Samapth.

Dear sampathdevunuri kumar,
You may develop the addon based on SDK DIServer for required function.
The DI Server is an extension of the DI API and supports all its objects. It is intended for high-volume data integration, where numerous client connections must be managed simultaneously and optimized for speed. It is also suitable where Web-services architecture is preferred.
Please refer to SDK help and SDK DIServer sample for more information.
Best Regards
Jane Jing
SAP Business One Forums team

In R12, can payroll user enter expense report for employees via web-based?

Hi,
In R12, can payroll user enter expense report for employees via web-based screen? Previously in 11i, it can be done via the Expense Report forms.
Appreciate advise on this.
Thanks in advance.
Regards,
Shiau Chin

Hi Anne,
Please see page 42 of the [url http://download.oracle.com/docs/cd/B34956_01/current/acrobat/120oieig.pdf]iExpenses Implementation and Admin Guide for R12 . If you are unable to enter the ID as per the guide, I would suggest raising an Service Request with Oracle Support.
Cheers, Pete

Web based worklist not working...

Hello,
(on wlpi 2.1 on weblogic sp2)
I've created a process that utilizes a stateless session bean. Every thing works
fine when using the fat-client worklist.
I wanted to use the web-based worklist with my process, so I did the following:
1.) Installed the %wlint_home%/samples/bpm_api/jsp/worklist.war from the weblogic
console.
2.) Tweaked the "startWeblogic.cmd" file (I'm in NT) to add the wlpi-worklist.jar
file into the classpath. (this is all in the reamde file in %wlint_Home%/samples/bpm_api/jsp/)
This works at first, as I can get to the login screen, but as soon as I log in, I
get a "Classnotfound error" saying it can't find my home interface for my session
bean.
So, I figured, "Must not be in the classpath (somehow)". I added my bean .jar file
into the classpath, and then try again. I get a different error that says "Classnotfound
error" for the EJBHelper. Same error happens on the fat client in both cases.
I can simply take out my startWeblogic classpath changes, and restart the server,
and the fat-client works again (but the jsp worklist doesn't not -- no surprise.)
Has anyone been able to get the jsp-based worklist to work with a process that uses
an EJB?
dave

I totally lost my internet connection via the router WRT54GS V6
I am connected directly into the computer from my cable modem.
I have tried everything. Upgarded firmware, factory default reset, setting the software again and again.
When I run Easylink Advisor it always reads, no internet...like I said the modem is working when plugged directly into my computer.
All proper lights are working on the router and modem.
Could the router be just be broken?
It seems to be getting worse and worse.
help please.

OSB Transformation Support in Web Based Console

Similar Messages

Maybe you are looking for