OSB Version - Weblogic Version compatibility
Hi All,
We have Weblogic Server on 10.3.2 and would like to install OSB.
I Know 10gR3 is compatible with WLS 10.3.2
I would like to know any latest versions of OSB 11g compatible with WLS 10.3.2.
We have no plans on upgrading our Weblogic server to next versions.
Thanks,
Satya
I guess only 10gR3 is compatible with WLS 10.3.2. For using higher versions of OSB you need to upgrade your WLS as well.For more information you can check the certification matrix for OSB versions higher than 10gR3.
Regards,
Karan
Oracle Fusion Middleware Blog
Similar Messages
-
Downgrade weblogic version from 10.3.1.0 to 10.3.0.0
Hi,
Is there any way I can downgrade he weblogic version from 10.3.1.0 to 10.3.0.0 without haveing impact on my current existing domain which was created using 10.3.1.0?
If so please post me the steps.
thanks
PoojaPlease refer to WebLogic Server 10.3.1 Compatibility with Previous Releases
http://download.oracle.com/docs/cd/E12839_01/web.1111/e13754/compat.htm -
Want to deploy BI Office.ear file on weblogic version 10
Hi,
I want to deploy BIOffice.ear file on weblogic 10version.
As per oracle weblogic version 9 is supported with OBIEE 10.2.3.4.1 version.
Please let me know if anyone hase done that.
Thanks
Nitasha
Edited by: user13005863 on Jan 11, 2011 4:03PMDo you have solution for this?
-
OIM 11g install error INST-07286 mw_home has wrong version weblogic
Hi gurus,
I have been trying to install OIM 11g from past few days
1. I have installed Oracle 10.2.0.5
2.I installed weblogic 10.3.3 by downloading from Oracle website , wls1033_dev.zip
3.I ran Rcu utlity 11.1.1.3.3
4. I installed SOA 11.1.1.2.0.
I am trying to upgrade soa to 11.1.1.3.0 using ofm_soa_generic_11.1.1.3.0_disk1_1of1.zip
It gives me error
INST-07286 Specified Oracle Middle ware home does not contain weblogic version 10.3.3 , upgrade to crrect version and then retry
It does not let me further.
Can some one please help /advise ?
Thanks,
PanduHi Gurus,
I think I found the answer.
I downloaded wrong version of weblogic
I had linux 32 , and wanted weblogic 10.3.3, So I went here ( row 3 , column 2)
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
file name = wls1033_dev.zip
well I was wrong it was not 10.3.3 or something was wrong. SOA installer did not recognise it as 10.3.3.
Who is to blame. I wasted 3 days I hope Oracle keeps right versions in its website for download.
I got the right one from edelievry
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11493750
and download =
Download Oracle WebLogic Server 11gR1 (10.3.3) for Linux x86 V21014-01 703M
Hope this helps some one.
Thanks! -
Can I change how Weblogic versions the logfile
Is it possible to change how WebLogic versions the logfil?
I would like to append the date instead of just a number, is that possible.
I would appreciate if you could mail me as well as posting a reply.
Roger KjernsrodRoger, this functionality is not supported.
"Roger Kjærnsrød" <[email protected]> wrote in message
news:[email protected]..
Is it possible to change how WebLogic versions the logfil?
I would like to append the date instead of just a number, is thatpossible.
>
I would appreciate if you could mail me as well as posting a reply.
Roger Kjernsrod -
Weblogic.version gives java error after install of D33T
Hi,
I just installed patch D33T (Oracle WebLogic Server Patch Set Update 10.3.6.0.4) - released April 2013. Before installing the patch, I checked my weblogic version (running setWLSEnv and java weblogic.version) following the instructions in the readme and the command worked.
The patch installed fine, I then checked the version again (first doing setWLSEnv and then running java weblogic.version) - however this produced the java error 'NoClassDefFoundError' - could not find the main class: weblogic.version.
I found a blog entry that suggested adding the weblogic.jar to the classpath, so I did that, then exported the classpatch, ran the setWLSEnv.sh again and tried the java weblogic.version command again - but still received the java error. I then tried running the command from the folder containg the weblogic.jar and still no luck.
Anyone have any ideas why this may be producing errors?
Thanks,
Connie
Environment info: RHEL 64 - Weblogic SErver 11gR1 (10.3.6.0) - The servers start and seem to be running fine after the patch install.I was trying a few more things after I sent my last reply and wondered if my classpath and path values might have not had correct values after running setWLSENV.sh
When I echo'ed their values, they came back without any of the values being set by setWLSEnv.sh
I then set them by copying and pasting the values echo'ed back from the setWLSEnv.sh file - by using export CLASSPATH=$CLASSPATH:<<paste of echo'ed classpath from setWLSEnv.sh>> and then the same for the path. After this, I tried the java weblogic.version and that worked - so now, I guess I am left to deal with issue of my setWLSEnv.sh not setting the CLASSPATH and PATH variables.
Thanks,
Connie -
Upgrade weblogic version to 10.x
Hi,
I have application developed using JDK1.4.2 and running in weblogic v7.x. If I were to upgrade to weblogic version 10.x, will I have face problem in terms of JDK compatilibility? Anyone has such experience?Well, with a few tweaks you should manage to get it running. We had to migrate an ear which was initially developed for OAS 10gR2 (Java 1.4) to WebLogic 10.3. It took as some time
but we managed to do it in the end. Probably from weblogic to weblogic, the migration should be even easier.
I think in the beginning WebLogic 10.3 was accepting the ear compiled by javac 1.4, though later we switched to 1.6 for obvious reasons. -
Need oracle 64 bit Licensed version weblogic 10.3.0.0
please help me to direct a point of contact to download 64 bit Licensed version weblogic 10.3.0.0
Hi NZL,
As the Weblogic version 10.3.0.0 is not available in OTN or edelivery so request you to open a Service Request so that shipment team will provide FTP link so that it could be downloaded.
Also please refer to the note:Error Correction Support Dates for Oracle WebLogic Server (Doc ID 950131.1)
Regards,
Prakash. -
Hi,
How I can know which is the compatbile version of forms with weblogic version?
For forms 11.1.1.2.0 ? WebLogic ?
For forms 11.1.1.6.0 ? WebLogic ?
For forms 11.1.2.0.0 ? Weblogic?
Regards,The version numbers mostly match in Release 1. So notice the last digit. This only applies to FMw 11.1.1.x (Release 1)
<blockquote>Fusion Middleware 11.1.1.2 with* WLS 10.3.2
Fusion Middleware 11.1.1.3 with* WLS 10.3.3
Fusion Middleware 11.1.1.4 with* WLS 10.3.4
Fusion Middleware 11.1.1.5 with* WLS 10.3.5
Fusion Middleware 11.1.1.6 with* WLS 10.3.6</blockquote> -
Struts support in Oracle Workshop for WebLogic Version 10.3
Hello:
Which version of Struts does Oracle Workshop for WebLogic Version 10.3 support?
I can't get it in the Release Notes or in the tutorial http://download.oracle.com/docs/cd/E13224_01/wlw/docs103/guide/webapplications/struts/strutsTutorial/0.intro.html.
Thanks for any input.Hi,
Currently workshop 10.3 facets will only provide struts 1.2 / 1.1 / 1.0
But we can use latest version of the struts like 1.3 also as we need to add those jar files under windows preference >> weblogic shared library.
But later we can change the Facets file and try to work with newer version of struts.
Let me know if you need any further help on this issue.
Regards,
Kal. -
Which WebLogic version is stable
Dear All ,
Have a small doubt.....please help me ....
Currently our application is supporting Jboss 5.1.0 and our team wants to support weblogic as well...... As iam a newbie to weblogic and browsed for some info and found that
weblogic 10.3 & weblogic 11.x are mostly used now ...
But which one of it is a stable product ?? is it ok if we use 10.3 ( I mean shall v get all features that jboss 5.1.0 gives?? ) and we want support for java 6 as well........
Requesting somebody to provide valuable suggestions .....Of course it is very hard to say with 100% certainty that some software product is stable.
But so far (knock on wood) I have not really experienced any instabilities.
- some problems concerning JPA2.0 and JSF2.0 are occasionally reported and can be read about on this forum
If you need to choose for a certain WebLogic version, I think it wise to choose the latest version (10.3.5), which can be downloaded here:
- http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
Probably not the answer you were hoping for, but this is all I can make of it. -
How to find WebLogic version?
I downloaded 7.0.0.1 (Said it was 7.0.0.1 in the title bar of the
installer) yet the Console -> Versions tab in the console shows me
that it's 7.0.0.0....is this a bug, or is this not the right place
to see version information?
Thanks,
-PaulYour version 7.0.0.1 breaks down as such:
major_level=7
minor_level=0
service_pack_level=0
rolling_patch_level=1
The difference between 7.0.0.0 and 7.0.0.1 is the rolling patch level.
If you're not getting the right version reported by weblogic.version, you should
find a build number next to it (something like #180205). Is it different for
the 7.0.0.1 release?
Steve
"Paul D. Schmidt" <[email protected]> wrote:
I downloaded 7.0.0.1 (Said it was 7.0.0.1 in the title bar of the
installer) yet the Console -> Versions tab in the console shows me
that it's 7.0.0.0....is this a bug, or is this not the right place
to see version information?
Thanks,
-Paul -
When I try to open a recent document I get the following message "You need a newer version of Pages to open this document." I have downloaded version Pages version 5.2.2 and the app store confirms this (and won't let me download it again), but my Pages About reports that I am using 4.3
Here is the solution that I received from the chat line.
When you update applications like Pages it usually keeps both versions on the computer. So what most likely happened is it didn’t put the new version on your dock. So to fix this, open a finder window. And go into applications which should be listed on the left. Scroll down and you will see Pages listed in here. And the icon should look different. You can drag that icon down onto your dock.Open that and you then can access your documents -
Version to version Copy - in HR - Short dumps
Hello gurus,
I have a question regarding version to version copy in BPS.
1. We use the standard planning function copy.
2. We use variable called version from and version to to set the values.
After we went live it used to work fine for the last 6 months.
The copy function appears as a pushbutton in the ALV layout.
These are the steps the user does:
1. User sets the value - From version and To version for example in our case ; FFF and X90.copy version FFF to X90.
2.Then comes to the HR planning layout. executes the layout. Select the varsion range FFF - X90.The presses the push button - HR ver to ver copy. It shortdumped due to memory issue.
SAP consultant suggested to refer OSS note 546464 which is
Note 546464 - Partitioning of Planning Packages
Does anyone use the
UPC_BUNDLE_EXECUTE_STEP or
UPC_BUNDLE_EXECUTE_STEP_2
program.
How it works. I think we can execute the planning function in the background.
Anyone use the above program.
Please advise.
Thanks for your help.
SenthilI've used UPC_BUNDLE_EXECUTE_STEP in the past; basically you can use it to schedule running a planning sequence in the background, similar to UPC_BUNDLE_EXECUTE. I used it in a similar situation to yours: maybe you are copying more data than before, or the system is busier.
You can get a description of UPC_BUNDLE_EXECUTE at
<a href="http://http://help.sap.com/saphelp_nw04/helpdata/en/d6/ce42b8dee611d3b7890000e82debc6/frameset.htm">UPC_BUNDLE_EXECUTE</a>
The basic difference is that the 'STEP' version divides up the data into chunks based on a characteristic, such as Region, defined in the Planning Level(s) as 'selection in package' . It is run from Ad-hoc package.
So from SE38, execute UPC_BUNDLE_EXECUTE_STEP, enter the planning sequence and Characteristic used for steps, and 'From' and 'to' values of the characteristic ( e.g. # and ZZZ).
Then execute in background, or schedule. If it fails, I sometimes ran in foreground to get some diagnostics. -
How to read contents of a file version using version url
Hi,
I have a file in a document library say "MyFile.txt". Versioning is enabled and there are three version of it
What i want now is that , by passing the url of version i got from SPFileVersion class, i must be able to read the contents of it.
Can anyone pls help me
Arjun Menon U.KYou can use the following line of code to get the content of a specific version
SPFolder fld = web.Folders["Documents"];
SPFile file = fld.Files["Documents/MyFile.txt"];
//specific version
SPFileVersion version = file.Versions[1];
//Get the data
byte [] dBytes = version.OpenBinary();
Refer to the following posts for more information, hope it helps
http://blogs.msdn.com/b/karthick/archive/2006/03/28/563045.aspx
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8d2619bf-34e9-421b-85c1-792b2a9e8ae9/spfileversioncollection-specific-version?forum=sharepointdevelopmentlegacy
--Cheers
Maybe you are looking for
-
Recording songs on my PC laptop and importing to Logic/Mac?
I have a Mac desktop and have started using Logic for my recordings. I have a very fast laptop that is unfortunately a PC. I was looking at this software called Mixcraft which looks like a pretty nice GarageBand clone for doing some recordings when o
-
Logic 8 seems not be using both cores??
I've been a lot of System Overload messages so I started monitoring the CPU usage and I've noticed that Logic is only using one core. When that maxes out I get the message. I've done all the things I should be doing (freezing tracks, raising the I/O
-
Has anyone seen a DRASTIC change in speed after upgrading to 5.7?
Has anyone seen a DRASTIC change in speed after upgrading to 5.7? Just the simple task of copying photos now takes FOREVER. Importing iphoto for just two years of photos (my smallest iphoto library by far) took A WEEK. I did not have access to Lightr
-
boot up new mac mini and it locks up showing code ending with error: turn the computer off to restart, how can i make it work?
-
Customized authentication scheme unauthorized when using help
I am receiving an unauthorized message when clicking on help on a label. The message was not being received until the customized authentication scheme was enabled.