OSD Computer Name
I have seen quite a few posts here about setting the computer name by prompting the user and/or using the MDT. My goal is to do bare-metal, "unknown" builds that assign the computer name to be the serial number from the BIOS. All our machines are Dell. I would like to not have to integrate the MDT if possible, but if the MDT is the only way to do it, so be it.
Thanks in advance.
I created the Set Task Sequence Variable step before Apply Windows Settings step... I wouldn't know how to "inject" the %SERIALNUMBER% into the Apply Windows Settings step if I wanted to...
2/23/2010 9:27:39 AM
4
Apply Operating System
Install Operating System
11134
The task sequence execution engine successfully completed an action
0
oint path [C:\programdata\Documents] Fixing junction point path [C:\programdata\Favorites] Fixing junction point path [C:\programdata\Start Menu] Fixing junction point path [C:\programdata\Templates] Setting %SystemRoot% to "C:\Windows" Getting namespace "Microsoft-Windows-Deployment" for architecture "x86" Getting namespace "Microsoft-Windows-Shell-Setup" for architecture "x86" Getting namespace "Microsoft-Windows-International-Core" for architecture "x86" Writing configuration information to C:\Windows\panther\unattend\unattend.xml Successfully saved configuration information to C:\Windows\panther\unattend\unattend.xml Image installation completed sucessfully. Closing image file \\SCCM.DOMAIN.LOCAL\SMSPKGD$\MA10003F\win7ent.wim Entering ReleaseSource() for \\SCCM.DOMAIN.LOCAL\SMSPKGD$\MA10003Freference count 1 for the source \\SCCM.DOMAIN.LOCAL\SMSPKGD$\MA10003F\ before releasing Released the resolved source \\SCCM.DOMAIN.LOCAL\SMSPKGD$\MA10003F\
2/23/2010 9:27:39 AM
5
Set Computer Name to Service Tag
Install Operating System
11134
The task sequence execution engine successfully completed an action
0
Finished with error code 0
2/23/2010 9:27:40 AM
6
Apply Windows Settings
Install Operating System
11134
The task sequence execution engine successfully completed an action
0
============================[ OSDWinSettings.exe ]============================ Command line: "osdwinsettings.exe" /config Setting %SystemRoot% to "C:\Windows" Loading existing answer file "C:\Windows\panther\unattend\unattend.xml" Computer Name: %SERIALNUMBER% Getting namespace "Microsoft-Windows-Shell-Setup" for architecture "x86" Registered Owner: Admin Getting namespace "Microsoft-Windows-Shell-Setup" for architecture "x86" Registered Organization: Company, Inc. Time Zone: Eastern StandardTime Time zone: Eastern Standard Time The OSDProductKey variable is not set in the environment. Not setting the product key in the unattend answer file. Setting local admin password. Writing configuration information to C:\Windows\panther\unattend\unattend.xml Successfully saved configuration information to C:\Windows\panther\unattend\unattend.xml Exiting with return code 0x00000000
Similar Messages
-
Computer Name prompt with Country Code
Using SCCM 2012 R2..
Currently we have 21 global sites indicated by a two digit country code, for example United States US, United Kingdom, GB, Spain ES etc.....
We are a Dell shop so we want the serial number as well.
Our end result should look like this. United States Computer
<CountryCode>-<Serialnumber>
US-23GHT54 for example.
What is the best way to have a drop down or prompt for country code in computer name field when a tech starts the OSD process??Hi
You can have a look at two of my blog post. The first one will show you how to enable Powershell support in your boot images:
http://www.mimercon.dk/da/easyblog/entry/adding-powershell-support-in-configuration-manager-2012-r2-boot-images
And the second one will guide you through all the step required to implement a Powershell GUI prompting for a Computer Name if the machine is unknown:
http://www.mimercon.dk/da/easyblog/entry/prompt-for-computer-name-during-configmgr-2012-r2-os-deployment-1
I know that this is not exactly what you want but you would "only" need to create your own Powershell GUI where you can select the country code and append the serial number to get your computer name generated. And then you could just follow the
step in the second post and substitue my Prompt-Computer-Name GUI with your own.
If you know a bit about about Windows Forms and Powershell it is fairly easy to create even though it might be easy for me to say that :)
If you want I could create a basic GUI for you but you would have to be specific in how you would like it to look and I would need all the country codes you need in the drop-down box. You can find my e-mail at my web site. -
File sharing afp:// address not computer name
Just setting up my new iMac and the file sharing afp:// address does not match the computer's name (Brute Squad), it's pulled in my old PowerBook's name (Alumen). I'm assuming it came from my Apple/iCloud account since that was the only computer I had registered when I set the iMac up. Restarting didn't help. Any ideas?
You can change the computer name in the System Preferences > Sharing pane, change the name at the top.
Best of luck. -
How to change the computer name
I need to change the computer name but after this I cannot access to the historical data (printing alarms).
I have already changed the settings in Options->System and restarted the system.
With MAX 3.0 I can see that all the alarm records are stored with the old computer name \\computer name\process\....
How can I do to read the old alarms with the new computer name?
Thank you
MichaelHi,
When you change the computer name in Options>>System, you are not changing the name of the computer. Rather, you are telling Lookout to log to either a remote or local system. Here are the specifics:
1. Computer Name: Name you want the traces to appear with (\\computer_name\process\...)
2. Default Computer: Computer you want to log to. If the name listed here is different than your computer's name (as seen by Windows), then it will attempt to log directly to that remote machine.
3. Default Path: Directory on either your local or remote machine that you want to log to.
To change the name of your local computer, you will need to do that in Windows. If you have WinXP, you can do this by right-clicking on My Computer and selecting Computer Name.
Go
od Luck
Mike -
Hi there,
Can labview look at the Computer that the program is running on and tell me the system infomation??
Like, computer name, System performance etc.
I have it looking at the hard drives and sending me an e-mail to say when they get full.
But it would be nice to include some system information so i can try to keep track of its health as well.#
Any ideas??
PeteDo a google search for environment variables inside windows.
Here is one website.
http://vlaurie.com/computers2/Articles/environment.htm
I also downloaded this file recently from the NI site.
Attachments:
windows info.zip 829 KB -
How to get a computer name in teststand step ?
how to get a computer name in teststand step ?
Hi,
Use an ActiveX Automation Adapter with the following settings,
ActiveX Reference : RunState.Engine
Automation Server: TestStand API (depends on your version)
Object Class: Engine (IEngine)
Action: Get Property
Property: ComputerName
Then set your Parameters: to pickup the String ComputerName.
Regards
Ray Farmer
Regards
Ray Farmer -
How can I see which computers (computer name) Creative Cloud is installed on?
How can I see which computers (computer name) Creative Cloud is installed on?
Hi Arno ten Hagen,
To check for activation you need to go to all the machines in which you have installed CC apps, launch any of the CC software, go to help and you will see the email address mentioned by which you are logged in to that machine.
Kb: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html .
Regards,
Romit Sinha -
I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes, and Itunes can't find my Ipad. [email protected]
Ok, if reinstalling iTunes as suggested above does not resolve the issue of iTunes recognising the iPad then try this -
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are no faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/
As for making your new laptop your 'home computer' follow these instructions -
1. Without connecting your iPad to your computer -
A) Install iTunes / make sure the latest version of iTunes is installed.
B) Go to the Store tab and click on "Authorise This Computer".
C) Go to Edit, click on Preferences [iTunes and Preferences on Macs] and click on Devices. Put a check mark in the box next to "Prevent iPods/iPhones/iPads from syncing automatically". Click OK and close iTunes.
2. Connect your iPad to your computer -
A) Start iTunes (it will not start automatically because of the action at 1(C) above).
B) Right click on your iPad under Devices in the left column. Select "Transfer purchases".
C) When the transfer has completed, right click on your iPad again and select "Backup".
D) When the backup has completed, left click on your iPad, click on the Apps tab, and put a check mark in the box next to "Sync Apps", and then click on "Apply" (bottom right).
E) Unless you want to always do a manual sync (as I do), go back to Edit, Preferences [iTunes and Preferences on Macs] and uncheck the box next to "Prevent your iPod.....".
F) Finally, on your iPad, check that everything is syncing properly. If not, go back to iTunes and check all settings.
NB You should not lose any apps. However, any 'purchased' missing apps can be downloaded again FOC. As with updates, this must be done with the Apple ID under which they were originally 'purchased'.
Also see here as to moving your music to your new computer -
http://support.apple.com/kb/HT4527 -
The Exchange Management Shell fails to connect in Exchange 2013 environment, this is a DAG environment and previously it indicates another error message, which is in my another thread. We fixed that error by delete the retired proxy entry in the server registry,
after that the error is gone but changed to below one, anyway the EMS still fails to connect to all servers:
VERBOSE: Connecting to NSWVIP999WTMBX.air.abc.au.
New-PSSession : [NSWVIP999WTMBX.air.abc.au] Connecting to remote server NSWVIP999WTMBX.air.abc.au failed with the
following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows
access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote
computers within the same local subnet. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : WinRMOperationTimeout,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Then it just show can't connect to all the exchange servers, from the wording it seems pointing to the Windows firewall settings for winRM, but when I look at the windows firewall found it's turned off. We use Sophos enterprise for the security, but all
other 3 exchange servers didn't have the same issue.Hi Lynn,
Thanks for your analyst and reply, I run the command as you suggested and checked accordingly to Task Manager, but seems none of them indicates a firewall or anti-virus.
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:808 0.0.0.0:0 LISTENING 2260
TCP 172.17.2.123:444 172.16.2.127:8050 ESTABLISHED 4
TCP 172.17.2.123:444 172.16.2.127:8069 ESTABLISHED 4
TCP 172.17.2.123:444 172.17.2.127:8053 ESTABLISHED 4
TCP 172.17.2.123:10952 172.16.2.68:80 ESTABLISHED 3296
TCP 172.17.2.123:11185 172.16.2.90:8080 SYN_SENT 468
TCP 172.17.2.123:11190 172.16.2.90:8080 SYN_SENT 15268
TCP 172.17.2.123:11330 172.16.2.90:8080 SYN_SENT 1296
TCP [::]:80 [::]:0 LISTENING
4
TCP [::]:808 [::]:0 LISTENING
2260
TCP [::1]:6001 [::1]:8028 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8029 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8030 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8031 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8032 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8033 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8034 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8035 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8036 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8037 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8040 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8041 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8048 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8049 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8059 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8060 ESTABLISHED 4764
TCP [::1]:8028 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8029 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8030 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8031 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8032 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8033 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8034 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8035 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8036 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8037 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8040 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8041 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8048 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8049 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8059 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8060 [::1]:6001 ESTABLISHED 9980
TCP [fe80::9054:e8f5:f885:8105%20]:808 [fe80::9054:e8f5:f885:8105%20]:9901
ESTABLISHED 2260
TCP [fe80::9054:e8f5:f885:8105%20]:9901 [fe80::9054:e8f5:f885:8105%20]:808
ESTABLISHED 4868
This is the full result, among them
4 -- System -- NT Kernel & System
468 -- There is no process associated with PID 468
1296 -- svchost.exe -- Host Process for Windows Service
2260 -- SMSvcHost.exe -- SMSvcHost.exe
3296 -- CcmExec.exe -- CCM Executive
4764 -- Microsoft.Exchange.RpcClientAccess.Service.exe -- Microsoft.Exchange.RpcClientAccess.Service.exe
4868 -- Microsoft.Exchange.ServiceHost.exe -- Microsoft.Exchange.ServiceHost.exe
9980 -- w3wp.exe -- IIS Worker Process
15268 -- ServerManager.exe -- Server Manager -
I can't connect to other computers on my network with computer names. Any suggestions?
i can't connect to other computers on my network with computer names. Any suggestions?
In what way are you trying to connect? File sharing? Printer sharing? Screen sharing? Something else?
How are your computers connected to this network? What happens when you try to connect to them?
Best of luck. -
Can you make Sysprep on Windows 8.1 and Server 2012 R2 Prompt for a Computer Name
Hi guys,
Our Windows 7 Unattend.xml has always made Sysprep prompt for Computer Name. I'm struggling to achieve that with Windows 8.1 and Svr 2012 R2.
Firstly: Is it still possible?
Secondly: If so, How?
ThanksOOBE will only hide pages that contain the answers in the XML. So if you want OOBE to prompt for a computer name, make sure your XML does not contain the ComputerName object.
-
Time Machine and computer name change
I just recently reinstalled the operator system after a computer crash when i did so changed the computer name and now when i go into time machine to restore the settings it only shows up as one sparse disc image.
i have found that when i can mount it manually but the files are not usable and when i mount it with time machine the history does not appear.Go to System Preferences - Sharing and change the computer name there. You can also, optionally, change the name of your hard drive to further clarify the origin of your backups. Click once on the "Macintosh HD" on your desktop, then click its name to allow you to edit it.
Matt -
LOGICAL SYSTEM NAME OR COMPUTER NAME
Dear Experts,
How can we get computer name of the user in SAP,agaisnt bsuiness transactions for outbound deliveries and finance documents.
Best rgds
ManiHi,
enter SM04.
regards -
How to get the computer name in a text box automatically?
Hi,
I am using flash cs4 (AS3). How can I get the computer name/username in a text box created for grabbing Username from the computer and show it in the username textbox automatically?
Thanks.You can't running a SWF on a webpage. Can you imagine if a SWF had access to that OS-level information? It breaches everything Flash, browsers and the web stands for, which is "not being an application", therefore it has absolutely no access to your computer. Especially information like your username.
If you're running a flash projector, that's different. Not that a projector can do that either, but projectors are applications and can be extended by things like MDM Zinc and ScreenTime mProjector. Going that route opens up the constraints on Flash Projectors and lets you tap into things like .dlls. Only via that route are you going to be able to get at such a low level item like the current logged on user. -
Changing the Computer Name... when it's greyed out in the Sharing Prefs?
Okay, here's a weird one.
Using Carbon Copy Cloner 3, I recently cloned the hard drive on my iBook G4 (OS X 10.5.4)—it was dying and I needed to swap in a new one. I made the swap, using the cloned version of my old drive, and everything was wonderful.
The new drive is great. The only artifact of the change is that when I see my iBook on a network, instead of the original computer name (let's call it +David's iBook+ for argument's sake), I get +David's iBook_1+. When I go to the Sharing Preferences pane, in the field where I should get my good old iBook's name, I get that _1 tacked on again, and instead of being able to edit it, the name is greyed out!
The hostname is fine. I can edit that. But the computer name refuses to be changed by any of the normal methods. I could probably go into Terminal and edit the /Library/Preferences/SystemConfigurations/preferences.plist file. But I get the feeling that there's something else going on here.
Any thoughts?
(I'm now wishing I'd just restored using Time Machine. Old habits die hard.)Thanks! I should have mentioned that I'd already tried that. Several times. There are no other computers with the same name as mine on either my home or office network.
I can click on the "Edit" button and change the name to "David.local" or whatever, and it'll stay that way—but it doesn't show up on the LAN. When I look for the computer over the network—either using Bonjour or the Apple-K command in the Finder—it shows up with its old name. If I try to connect with "David.local" (or whatever), I get an error saying the server can't be found.
Since posting, I've also tried logging in as the root user and changing it there. No dice.
I had to replace the hard drive (the reformatting that caused me to clone the disk in the first place turned out not to solve the problem, which was that the hard drive was failing); for a week I was using an external drive clone as the startup disk for my iMac. It let me change the name there just as it should have. No more +David's iBook_1+. Woohoo!
But when I copied the disk back onto my brand new internal drive... There it was again. Greyed out. Can't get at it.
Grrrrrr.
Again, it's not a big deal; I want to change the name so that it fits the naming convention at my office. But it's really bugging me! (Obviously.)
I suppose I could reinstall and migrate the accounts and apps over....
Maybe you are looking for
-
Colours screwing up in InDesign CS6
Basically I am printing my 2nd year graphic design folio in three days and Ive got a page where the colours are screwing up. I have them in photoshop all fine in RGB, then when I save them and place in indesign the colours screw up. I know this is CY
-
Reg dynamically displaying records from database into a jsp page
I am working in a project which is using struts and hibernate.In a class I gave code for retrieving data from a table and I put it in a list. List retrieveList; public List getRetrieveList() { String SQL_QUERY ="from student s"; Query query = session
-
Hi Can someone clarify something for me: HTTP with SSL without client authentication -> Is the information still encrypted the same way as with certificates? Do I need to set up something on the SAP/XI side when not using certificates? If information
-
what does "16bit" mean? millions of colors? What is the "bit" spec for my mac book pro? - the specs only say "millions of colors"! thanks!
-
Data sheet for x2-8 HALF Machine
Hi, I am looking for oracle exadata Data sheet for x2-8 HALF Machine. I googled but found data sheet only for FULL machine. Can one have a link / pdf for this HALF machine x2-8 data sheet ? Thanks Yoav