OSD - Failed to run Task Sequence. An error occurred while starting the task sequence (0x8007000E).

Failed to run Task Sequence.
An error occurred while starting the task sequence (0x8007000E)."
While OSD, picks up task sequence but fails in resolving task sequence dependencies. SMSPXE identifies device is not in database (unknown).
SMSTS.log shows
ThreadToResolveAndExecuteTaskSequence failed. Code(0x8007000E)" in SMSTS.LOG, have seen other articles suggesting failure due to lack of storage (RAM) but this task sequence has worked in past.
By the way, if I create a stand alone media, we are able to image the workstation. What has changed in the task sequence such that the workstation is unable to download policies due to lack of storage (RAM) on workstation. Workstation has 2 GB of RAM.

I have found a work around for the issue, even though the computer is unknown, there were software updates targeted to the ALL SYSTEMS collection which applies to All Unknown Computers and therefore to x64 Unknown Computer and x86 Unknown Computer.
We had a SCEP ADR applying definition updates to All Systems, we applied the ADR to a different collection, removed all the SCEP updates to All Systems and successfully re-imaged the workstation. Following article was of great help in identifying the problem
after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log
Thanks Gerry for your assistance.

Similar Messages

Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)

Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.

Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John.

Wlserver.exe error occur while start the web logic server-please help

hi
Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
Thannks in Advance,
Cheers,
bala...

Could you please mail the errors and the WLS Version and service pack as well.
- Ramkumar

Error occurs while starting the console in browser in wlportal4.0

I am also getting the same problem for
[wlserver6.1 with SP1, wlportal4.0,ebcc4.0,
Windows NT4.0]
the server has been started successfully,
but if i try to start the console in the browser using(http://localhost:7501/console/index.jsp)
am getting classnotfound exception, the
stack trace is as follows,
<Dec 14, 2001 5:54:50 PM IST> <Error> <HTTP> <[WebAppServletContext(7417844,console,/console)] Error
loading servlet: "weblogic.management.console.webapp._index"
java.lang.ClassNotFoundException: weblogic.management.console.webapp._index
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:178)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:
65)

Kamal,
Are you running wlporal 4.0 on Solaris 8?
Do you get this error consistently?
Thanks,
Michel.
"Kamal Raj" <[email protected]> wrote in message news:3c1d9620$[email protected]..
I am also getting the same problem for
[wlserver6.1 with SP1, wlportal4.0,ebcc4.0,
Windows NT4.0]
the server has been started successfully,
but if i try to start the console in the browser using(http://localhost:7501/console/index.jsp)
am getting classnotfound exception, the
stack trace is as follows,
<Dec 14, 2001 5:54:50 PM IST> <Error> <HTTP> <[WebAppServletContext(7417844,console,/console)] Error
loading servlet: "weblogic.management.console.webapp._index"
java.lang.ClassNotFoundException: weblogic.management.console.webapp._index
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:178)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:
65)

Error occured while starting the listener

i have encountered a problem when starting with lsnrctl
C:\Documents and Settings\rajesh.parepalli>lsnrctl
LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 25-SEP-2007 15:22:
06
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraHome92TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 1056: Unknown error
LSNRCTL>
can any one suggest me on this?

i have configured as per the link u have sent, even though it's giving the same error.
i am sending the both ora files to you for reference
listener.ora:-
# LISTENER.ORA Network Configuration File: C:\oracle\ora92\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = HP17264125083)(PORT = 1521))
EXTERNAL_PROCEDURE_LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc))
SID_LIST_EXTERNAL_PROCEDURE_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = extproc)
(ENV = "EXTPROC_DLLS=ANY,LD_LIBRARY_PATH=$ORACLE_HOME/lib")
(SID_NAME = extproc)
(ORACLE_HOME = c:\oracle\ora92)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = rajesh)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = rajesh)
(ENVS = "EXTPROC_DLLS=ANY")
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = orcl)
(ENVS = "EXTPROC_DLLS=ANY")
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora92)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ANY")
tnsnames.ora:-
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL.MERITOSTECH.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HP17264125083)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
RAJESH.MERITOSTECH.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HP17264125083)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rajesh)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS = ( PROTOCOL=tcp) (HOST=HP17264125083) (PORT=1521)
(CONNECT_DATA =
(SID = ExtProc)
(PRESENTATION = RO)
INST1_HTTP.MERITOSTECH.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HP17264125083)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = ExtProc)
(PRESENTATION = RO)
)

Job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name

Experts,
Please help me out here,Am facing this issue while scheduling a job in BIPublisher.
job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name
Thanks,

You are probably installing on a hardened machine.
The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
1- the library name is libX11.so.4 and
2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
You can check the results running <server-root>/bin/base/jre/bin/jre
Hope that helps and sorry about my poor english.

An error occurred while preparing the installation try running this application again mountain lion

I have Macbook Pro. Previous OS was Mountain Lion 10.8.5. It was running smoothly. When I have tried to clean install the NEW Maverick 10.9 it didnt work. I erase the drive then restart for boot. nad my usb boot disk was connected. When the window came for reinstall the OS. I click. click to "continue" but then it says....there has a problem with boot. But six months ago I installed it in the same way without any error or any hamper. after that i tried many times to boot and install but i failed. i tried to recover it by internet recovery. it takes few hours. after completation the recovery the reinstall window again came. i click to reinstall then it says "an error occurred while preparing the installation try running this application again mountain lion"

i tried several times but it doesn't work. now i am downloading again osx 10.8.5 dmg to try again.

Cant update CF (Error occurred while installing the update: Failed Signature verification)

Hi I'm suffering with this issue Bug#3506758 - MySQL 5.6 Unable to Execute Queries
and therefore am trying to update cf 10 to version 13 (current version is 8) however I get 'Error occurred while installing the update: Failed Signature verification'
I'm running Mavericks on Mac.
Can anyone point me to a step by step way to resovle this please (I'm new to Macs and am a cf coder but alas dont have any experience in server admin).
Thanks very much indeed.
Nick

I was going to suggest that you needed to install the mandatory updater, but the Adobe help page for it says you shouldn't need to if you already have update 8 installed. Might be worth verifying though.
-Carl V.

An error occurred while preparing the installation. Try running the application again

I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install PROJECT:Install-846
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA PROJECT:InstallAssistant-476.8
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
*****This is where the timer starts saying “”About a minute remaining”*****
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
      "Kernel Cache" = "/.IABootFiles/kernelcache";
      "Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******           Path: /Volumes/Install OS X Mavericks
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******     Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
Thanks in advance!

Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
First, my specs
Secondly, I am running an aftermarket 500 GB drive.
Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
And finally, here is the seeminly unavoidable error message.
Also, other things I've tried now are
installing it from the "show package contents area",
mounting said DMG and trying to install from there.
installing a package file called "upgradeos.pkg"
no luck.

Azure Sql DB Export to Storage Container fails with "An error occurred while sending the request"

I've built a new VM from which I'm running PowerShell scripts to backup my databases. It had worked before on an old server for several months, and worked once on the new server, then I upgraded my Azure PowerShell cmdlets, and haven't been able to
get it to work again. The new version is 0.8.10.1.
Below is my source code, with sensitive stuff replaced with ?'s. When I display the $stctx and $dbctx, they seem to have reasonable values. I added the IP address of the server as an exception to the db firewall, and I've installed SQL Server
Mangement Studio and verified that I can connect to the database. I have a feeling there's something simple I've overlooked.
Here's are both error messages:
Start-AzureSqlDatabaseExport : An error occurred while sending the request.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Start-AzureSqlDatabaseExport : Error while copying content to a stream.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Here is the source code:
param($dbname)
if ($dbname -eq $null) {
write-host "Database code must be specified"
return
$password = "????"| ConvertTo-SecureString -asPlainText -Force
$servercredential = new-object System.Management.Automation.PSCredential("????", $password)
$dbsize = 1
$dbrestorewait = 10
$dbserver = "????"
$stacct = $dbname
$stkey = "????"
$stctx = New-AzureStorageContext -StorageAccountName $stacct -StorageAccountKey $stkey
$dbctx = New-AzureSqlDatabaseServerContext -ServerName $dbserver -Credential $servercredential
$dt = Get-Date
$timestamp = "_" + $dt.Year + "-" + ("{0:D2}" -f $dt.Month) + "-" + ("{0:D2}" -f $dt.Day) + "-" + ("{0:D2}" -f $dt.Hour) + ("{0:D2}" -f $dt.Minute)
$bkupname = $dbname + $timestamp + ".bacpac"
write-host "db context"
$dbctx
write-host "storage context"
$stctx
write-host "Backup $dbname to $bkupname"
Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx -StorageContainerName databasebackup -DatabaseName $dbname -BlobName $bkupname

Hi Brad,
Mentioned script, with appropriate values, works on my system.
I'm able to export an Azure SQL database to blob storage. Am using version 0.8.10.1 of cmdlets, so this the same version mentioned in this problem description.
Can you please try using Add-AzureAccount and check if that helps. This is indicated in a different third-party blog.
http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1%29."http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1
Does it work from a different machine with newly downloaded credentials.
Does it work for a newly created database (so minimal database size).
If above do not work, we may require additional details like RequestID, StorageAccountName, ServerName so an MS ticket may be more appropriate.
Girish Prajwal

I am running Windows 7 and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Failed to execute with the error Error occurred when starting the parser: t

Dear All
I am getting this error
""A database error occurred. The database error text is: The MDX query SELECT { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH].[LEVEL01].MEMBERS, [DASKFZ1TRFOLNTG78G0HH2B87].MEMBERS ), [0MATERIAL].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ), [0COMP_CODE].[LEVEL01].MEMBERS ), [0ACTDELDATE].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION ON ROWS FROM [0IC_C03/ZMATSTOCK] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)""
I already went to similar kind of error solution in forum,but this error is coming for one web I query,all other reports are working fine.
I already implemented note 1032461

Hi,
Under normal circumstances it should be enough to restart the connection service.
As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
All the Best,
Madhu....

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
Checking in the log revealed the following error:
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?

A: my MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
Does anyone know what could cause this error message?
Thanks a lot for any hint.
Sergey

Hi Henry,
I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
Please let me know if this is unusual for this version.
Regards,
Arvind E

An unknown error occurred while executing the PowerShell script:

Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name:      Microsoft-Windows-PowerShell/Operational
Source:        Microsoft-Windows-PowerShell
Date:          4/9/2015 3:27:04 PM
Event ID:      4100
Task Category: Executing Pipeline
Level:         Warning
Keywords:      None
User:          mmmmmm\paufra
Computer:      tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
    <EventID>4100</EventID>
    <Version>1</Version>
    <Level>3</Level>
    <Task>106</Task>
    <Opcode>19</Opcode>
    <Keywords>0x0</Keywords>
    <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
    <EventRecordID>285</EventRecordID>
    <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
    <Execution ProcessID="2344" ThreadID="4076" />
    <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
    <Computer>tools-francis.mmmmmm.com</Computer>
    <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
    <Data Name="ContextInfo">        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
</Data>
    <Data Name="UserData">
    </Data>
    <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>

Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

OSD - Failed to run Task Sequence. An error occurred while starting the task sequence (0x8007000E).

Similar Messages

Maybe you are looking for