OSD Task slow downloading Operation System Wim

Hello,
Let me start by saying that I have my OSD task sequence working and I am able to deploy it to multiple computers and it all works fine.
However, I am experiencing a slight annoyance. When the Task Sequence begins the download of the Operation System wim file to apply to the HDD, the download is very slow. Looking at SCCM Data rates, the server is only sending it out at 40 mbps which means
it takes like 45-60 minutes just to download the wim file.
I tried the F8 option into CMD and tried manually copying the wim file over from the server and the server sent the file at 600 mbps which is ideally what you want for a gigabit network.
I am running 2012 R2 CU1 which contains the KB2905002 update which supposedly fixed the issue. I have been searching and search all day and I am officially
out of ideas and fixes for this problem. BITS throttling is disabled, there are no rate limits on the DP. No errors in the smsts.log file. I am stumped.
I currently run a Primary Site Server with the DP located on the same server. This is a single box setup, no remote DP's or secondary sites.
I would appreciate if anybody who had similar issues could help me out with this?
I look forward to your response.
Regards,
Kyle.

All existing media (such as stand-alone, boot, or prestaged) that use existing boot images (default or custom) will have to be re-created.
To fully fix the problem in Issue 2, the client side .msp file has to be installed during the "Setup Windows and ConfigMgr task by using the PATCH= command.
For more information about how to update boot images, see the How to Manage Boot Images in Configuration
Manager topic on the Microsoft TechNet website.
But the media it discusses re-creating are boot process that wouldn't normally have access to the boot image from the DP. This media was stuff that was created potentially 1x and now exists outside of the environment. I currently have CU1 applied.
When I recreate the boot image I see that is still seems to be the same OS version (6.3.9600.16384), should this have changed? What version are you seeing in your 2012 R2 environment that you are having speedy WIM downloads with? It looks
like there is a revision to ADK 8.1 that maybe I don't have? It looks like that may take WinPE to 5.1, which is still OS version 6.3 (like I have) but 6.3.9600.17031. http://blogs.technet.com/b/configmgrteam/archive/2014/04/03/understanding-the-adk-for-windows-8-1-update-and-configmgr-osd.aspx .
I wonder if I should have that?
I am also trying to figure out how the PATCH command is supposed to affect WIM download speeds. The Setup Windows and Configmgr step of the task sequence is after the WIM would already be downloaded.

Similar Messages

MDT 2012 \ WinPE 3.0 Slow Install Operating System

I have an issue with a custom wim I have incorporated into my Task sequence. When I use a custom Wim, at the point where the MDT Tasksequence begins to "Install Operating System" it slows down to a crawl. What previously took 5-10 minutes on a
previous wim, is now taking 30-50. When the "Install Operating System" task begins, it starts a at a very decent rate, you can see the percentage or time increasing/changing every few seconds with out issue, but when it gets to 30% completion, it
starts to slow down dramatically. Eventually it will get to 100% Completion, where it will stay for the next 5 minutes, at which point it will apply the unattend.xml which will also take a very very long time to complete.
Once it reboots from applying the Unattend.xml everything runs normal.
My Setup:
I am using MDT 2012 - with WinPE3.0
To create my Custom Wim I did the following:
I created a brand new standard tasksequence, to deploy an OS to a machine, install updates then sysprep and capture to a wim. I set a custom variable in the tasksequence which set DoCapture=Yes. This allowed me to Capture the Operating system after the windows
updates were done without having to do any additional steps. I then imported the Image into the operating systems section of my MDT Deployment share, and incorporated it into my previous Tasksequence.
I have also noticed that the size of the wim file I created is about 1.5 gigs larger than my previous wim.
Steps I've Taken for remediation:
I've tried rebuilding my boot.wim several times.
Increased the scratch size from 32 -> 64 -> 256 -> 512MB
Removed unnecessary drivers from the boot.wim
Any ideas you guys might have with regard to getting my Install Operating System phase to speed up to normal speeds with be greatly appreciated. Is there an extra step with the install.wim that I importing into MDT that I should be doing?

I completed a robocopy in the full blown OS to download the 4.9g wim, it takes 1 minute and 36 seconds. It does have gigabit connection active in the full blown os.
When I am running WinPE, Task Manager is showing my local area connection is running at 1Gbps.
Another discrepancy I'm noticing is that @ 12:16:04 [Line1801] the task sequence finishes apply the wim. It takes 10 minutes for it to start the next task found on Line 1807. Any Ideas on why it taking so long to apply the bootsect.exe
command?
I did disable the "Apply Patches" task, and it did remove 20 minutes by not applying those patches. Thank you for that suggestion.
MCSA Server 2008R2 \ 2012 MCSE Server Infrastructure CCNA

Link to download operating system

Dear all,
I did procedure to buy mountain lion 10.8.x for my Imac actually powered with Mac OS X 10.6.8.
Everything has been done correctly, I received mail of confirmation that operating system was available in mac app store for the download, but the link for the download in mac app store does not appear.
In your opinion, what has happened?
In the meanwhile I contacted the support via e-mail, to have a reply, but it's interesting to have also your feedback.
Thank you.
Regards.
Luigi

Thank you for the help. There was a strange translation in italian language in the pdf license ("riscatta" as per redeem) that does not match with link of app store (Utilizza il codice as per redeem). Anyway now I put the code, operating system now is in download. Thank you again.

Syncing Notes and Tasks New Iphone operating system

Will the new operating system for the iphone allow syncing of notes and tasks from entourage

Apple stated that syncing of Notes will be supported; nothing was said about To-Do's, and they did not specifically address whether Entourage Notes/Tasks will be supported, so you'll most likely need to wait until 3.0 is released for a definitive answer.

IDVD8 slows entire operating system - Normal?

TIA
For some reason I am noticing > much more than before < that when using iDVD, during the whole processing periods, the operating system slows to a crawl, email, Finder actions, everything. When I try to use anything else, spinning ball of death runs and runs.
This used to be only with the Encoding Audio part.
I have 173 gig free space on my HD available
4 Gig Ram
In the activity monitor it is using 220%+ of the CPU
My iMovie files are on one of my additional internal drives, and usually write the ready to burn final file to my desktop.
Help?
d
Message was edited by: Don P
Message was edited by: Don P

Thanks SD
I have tried everything you listed previous and unfortunately, this is not a new unit. As I mentioned this didnt seem to be a big a issue as in previous experiences!
I have 4.11 installed, do you mean install updater again?
Here is disk activity
1618 iDVD 6.00 31 183.95 MB 687.17 MB
1616 iMovie HD 0.80 15 41.87 MB 462.51 MB
215 ScreenShot Plus 0.70 3 40.87 MB 633.54 MB
214 SimpleKeys 0.70 3 39.14 MB 540.78 MB
211 Classic Menu 0.20 3 38.34 MB 549.96
628 Activity Monitor 5.60 7 32.97 MB 394.13 MB
1178 QuickTime Player 0.00 7 24.53 MB 422.63 MB
209 Finder 0.00 5 14.97 MB 393.43 MB
217 Microsoft Database Daemon 0.00 3 10.04 MB 366.40 MB
220 kbd_backgroundapp 0.00 3 8.39 MB 381.08 MB
235 GrowlHelperApp 0.00 6 7.17 MB 361.86 MB
207 SystemUIServer 0.00 4 6.74 MB 372.38 MB
216 Stickies 0.00 2 6.07 MB 359.60 MB
358 Preview 0.00 5 5.58 MB 357.77 MB
87 loginwindow 0.00 4 5.56 MB 370.95 MB
221 TWAINBridge 0.00 3 5.37 MB 354.20 MB
360 TextEdit 0.00 3 5.27 MB 358.05 MB
86 ATSServer 0.00 2 5.06 MB 96.03 MB
212 Desktility 0.00 2 4.42 MB 364.63 MB
204 Dock 0.00 3 4.36 MB 365.48 MB
178 mds 0.00 8 4.10 MB 44.51 MB
213 UniversalAccessApp 0.00 2 3.91 MB 350.93 MB
218 MouseWorks Background 0.00 2 3.69 MB 350.68 MB
1299 System Events 0 .00 2 3.19 MB 346.20 MB
CPU
1618 iDVD 4.60 29 171.23 MB 668.35 MB
1616 iMovie HD 0.90 15 41.88 MB 462.51 MB
215 ScreenShot Plus 0.70 3 40.87 MB 633.54 MB
214 SimpleKeys 0.70 3 39.14 MB 540.78 MB
211 Classic Menu 0.80 3 38.34 MB 549.96 MB
1628 Activity Monitor 4.90 8 34.01 MB 379.87 MB
1178 QuickTime Player 0.00 7 24.70 MB 422.63 MB
209 Finder 0.00 5 14.96 MB 393.39 MB
217 Microsoft Database Daemon 0.00 3 10.27 MB 366.40 MB
220 kbd_backgroundapp 0.00 3 8.81 MB 381.08 MB
235 GrowlHelperApp 0.00 6 7.84 MB 361.86 MB
207 SystemUIServer 0.00 4 6.76 MB 372.38 MB
216 Stickies 0.00 2 6.13 MB 359.60 MB
358 Preview 0.00 5 6.01 MB 357.77 MB
360 TextEdit 0.00 3 5.72 MB 358.05 MB
87 loginwindow 0.00 4 5.62 MB 370.95 MB
221 TWAINBridge 0.00 3 5.55 MB 354.20 MB
86 ATSServer 0.00 2 5.01 MB 86.32 MB
212 Desktility 0.00 2 4.48 MB 364.63 MB
204 Dock 0.00 3 4.40 MB 365.48 MB
178 mds 0.00 8 4.09 MB 44.51 MB
213 UniversalAccessApp 0.30 2 3.92 MB 350.93 MB
218 MouseWorks Background 0.00 2 3.86 MB 350.1299
System Events 0.00 2 3.24 MB 346.
Thank you,
d

Software Center showing Application Task Sequence as Operating System

I have created a custom task sequence and it includes 2 applications. The first one uninstalls an app using a batch file and the 2nd TS installs a new version. The problem is that software center is showing type Operating System so when I click
on it to install, it gives a message about installing an operating system and it may delete/format the drive.
Is there a setting I need to change so it sees it as an application rather than an OS? I have other application Task Sequences that show as application rather than Operating System...
Thanks
Rick Ray

That's by design. And by design Task Sequences were meant for Operating System Deployment, that's why you also get notified about "Operating System Installation" in the Software Center.
You should use SCCM Applications with supersedence to accomplish what you are trying to do:
Do an application for App 1 (your old app)
Do an application for App 2 (your new app)
Configure App2 to supersede App1 (uninstall the App1)
Deploy App2 to your computers
This way the App1 will be uninstalled before the App2 is installed.

Downloaded Operating System - Apps Stopped Working

Hello,
On advice from a friend, I recently downloaded the latest iPhone 3G operating system software. Now most of my applications don't work. They just blink black and then return to the iPhone icons. The iTunes store says that my applications are up-to-date. What's the deal-e-o?
Dale MF

what have you done to troubleshoot thus far?

Slowness of operating system

Out of the blue my iMac G5 started slowing down. The multi colored pinwheel shows up all the time when changing applications and such. I don't believe I have used all my memory, however I'm not sure. Any suggestion as to how to get my machine operating faster?

You can take a look at your Activity Monitor (Apps>Utilities>Activity Monitor) and see how much memory you are using, also see if there's anything that is hogging your CPU. If you find something that is using inordinate amounts of either, perhaps you can modify your usage. Safari is a well known CPU hog, but it could be any app that you regularly use.
Please post back,
Miriam

Lost my books(2)after downloading operating system upgrade

Lost my 2 books after Op Sys update.How do I get them back?

Go to the Purchased tab - in Collections - in the iBooks app and download them again. You will not be charged again as long as you use the same Apple ID that you bought them with.

Hi sir,Please how can i ask operation system for my MacBookPro 15 inch from Appel website ?

Hi sir,Please how can i ask operation system for my MacBookPro 15 inch from Appel website ?

Thank you for response , the question is : How can i download operation system from Apple website ?

I just downloaded Yosemite operating system and my computer is extremely slow but also not opening my Adobe applications. Can anyone help? thanks!

I just downloaded Yosemite operating system and my computer is extremely slow but also not opening my Adobe applications. Can anyone help? thanks!

First, tell Apple about your problems... with details... and hope for an update that fixes your slowness
Second, Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

HT1688 i have a 4g and downloaded to operating system and my phone is running slow super slow.. question is i am traveling for a few days can i uninstall the upgrade

My 4g iphone is running slow after installing iso 7 question can i uninstall the new operating system ?

http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/ some other tips.

A custom task sequence to install software is always listed as Operating System on Software Center

Hello,
I have built several custom task sequences to install software in SCCM 2012 R2 CU1 environment, but the type of task sequence is always listed as Operating System on the Software Center. I tried creating a simple task sequence (Task Sequence 1) that contains
a single restart computer step only and tried deploying it to a test machine. This task sequence is also listed as Operating System. This task sequence fails because this is not the one for OS install and I do not specify a boot image for this task sequence.
All task sequences that I have created in SCCM 2012 RTM environment are working as expected. All task sequences that I create in SCCM 2012 R2 CU1 are listed as Operating System regardless of its actual type (I upgraded my environment from CM2012 RTM to CM2012
R2 CU1 last month).
Here is a test task sequence that contains a single step of restart computer. This is not Operating System install but listed as Operating System. Any thoughts?

If you use OSD steps in your task sequence you will get this prompt.
http://social.technet.microsoft.com/Forums/en-US/3eb7569c-0b5a-4b40-86c3-d4f092c70aca/task-sequence-warning?forum=configmanagerosd
Per Mikko:
Using any of following steps (and possibly others as well, I did not check all of them) will change the task sequence type from generic to OSD:
General - Join Domain or Workgroup
General - Restart Computer (Only "The boot image assigned to this task sequence" option)
Disks - Format and Partition Disk
User State - Request State Store
User State - Release State Store
Images - Apply Operating System Image
Images - Setup Windows and ConfigMgr
Daniel Ratliff | http://www.PotentEngineer.com

Powershell commands to change operating system image in task sequence

Hello,
I am looking for a way to script changing a task sequence to use a different OS image file. So far the only thing I can find using the powershell MDT module is the "import-mdttasksequence" command, but it looks like that can only create a whole
new task sequence.
My end goal is to automate our master image builds and the last step is to take the captured master wim file, import it into the Operating Systems folder, and then update the associated custom image task sequence to use that new OS image. With
"import-mdttasksequence" I have to create a new task sequence with a new ID, when I already have one present that would be easier to just update to point to a different OS image. I do not see anyway to edit task sequence steps using the powershell
module.
Is this possible? Maybe using Get-Item to get the OS GUID and then editing the task sequence XML file directly?
MDT 2013
Server 2008 R2
Regards,
Darren

Hi Darren,
If I understand correctly, you can use the same name for the captured WIM file? Then you can just copy it to the operating systems and it will be picked up by your TS.
I've found this
thread on the forums that probably has your solution in it.
From that thread:
I now capture to the Captures folder and name the WIM file after the task sequence ID. So for example, my "Update Windows 8 General Purpose" task sequence with ID "8_GP" now creates "\\server\DeploymentShare$\Captures\8_GP.wim"
In the Scripts folder on the deployment share I created "Relocate.cmd" with the following contents:
MOVE /Y "%DEPLOYDRIVE%\Captures\%1.wim" "%DEPLOYDRIVE%\Operating Systems\%1"
And finally, I added a step at the end of my task sequences that runs this custom command (no
Start in value defined):
cmd /c %SCRIPTROOT%\relocate.cmd %TaskSequenceID%
This works great and MDT does in fact recognize the changed .wim file in Operating Systems and copies it to linked deployment shares, so no worries there.
Hope this helps.

FAILURE ( 5640 ): FALSE: Verify File: \\SERVER\DeploymentShare\Operating Systems\Image 11-13-2014.wim\image.wim ERROR

Guys,
I need help with this error please. I have a WDS in building 13 and another 1 in building 31; Both servers have MDT 2013. At some point, both deployment shares were linked via MDT but I deleted that few days to solve some deployment share corruption in building
31 WDS.
Presently I have 2 32bit images (my 64bit images work fine) giving me the following MDT error in BUILDING 13 during the image deployment:
FAILURE ( 5640 ): FALSE: Verify File: \\BUILDING 31 SERVER\DeploymentShare\Operating Systems\Image 11-13-2014.wim\image.wim
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error:00001608; Source: Unknown)
The Execution of the group (Install) has failed and the execution has been aborted. An action failed....
Please note, BUILDING 13 deployment share is not linked to BUILDING 31 deployment share. I don't understand why this error is pointing to BUILDING 31 deployment share.
\\BUILDING 31 SERVER\DeploymentShare\Operating Systems\Image 11-13-2014.wim\image.wim has been removed. I need the task sequence to point to
\\BUILDING 13 SERVER\DeploymentShare\Operating Systems\Image 11-13-2014.wim. BUILDING 13 deployment Share task sequences are pointing to
\\BUILDING 13 SERVER\DeploymentShare as well as my CustomSettings.ini and Bootstrap.ini
1. I have diskpart and cleaned the disc, no luck.
2. I have checked the Install action for both images task sequences and even verified each action on both tasks and cant find any error.
3. I have re-generated the boot images and retyped
\\BUILDING 13 SERVER\DeploymentShare on its CustomSettings.ini and Bootstrap.ini
4. I am in the process of copying Image 11-13-2014.wim back to
\\BUILDING 31 SERVER\DeploymentShare\Operating Systems BUT again I don't understand why these task sequences are pointing to building 31. If this step doesn't work, I will restore both images from a backup and re-added them to building 13 MDT.
But I don't think these steps are the solution.I am out of ideas here...

I disabled McAfee AV, moved images boot files to a different location, regenerate boot images files in MDT, update deployment share, re-add boot files to WDS & refresh WDS. This works for me.

OSD Task slow downloading Operation System Wim

Similar Messages

Maybe you are looking for