OSD: What is the difference booting into winpe from pxe/media and booting in winpe from OS/Vista?

Hi,
We have a task sequence issue. Please see
http://social.technet.microsoft.com/Forums/en-US/56d783e3-214d-4027-84c1-c03cdf2013f1/osd-convert-boot-to-logical-path-failed-0x80070490-retrying-after-attempt-29-it-fails-and-says?forum=configmanagersecurity
for more info. What I would like to know: what is the difference/is there a difference between:
A.booting in PXE/bootable media to WINPE
B.booting from OS (Vista) into WINPE => will this load the x86 boot image (it doesn’t look like it, I CAN see the image loaded ….wim is exactly the same when loaded from OS)
The reason why I ask this: see link above: loading TS from PXE/media works fine, when choosing the exact same TS from WITHIN OS (Vista, 32 bit) the TS fails.
Note: we set the ts step format system disk to NOT run if _SMSTSMediaType is OEMMedia (set in order to not format if prestaged media). So if for some reason this variable would be set booting TS from OS?
Please advise.
J.
Jan Hoedt

What I would like to know: what is the difference/is there a difference between:
There is none.
Starting a TS using Software Center will download the boot image that's assigned to the task sequence.
PXE (depending on how many boot images are available on the PXE-enabled DP): the TS will use the boot image that's assigned to the task sequence (it will download that one and reboot into PE for a second time if the first boot image (see smspxe.log) does not
match).
P.S. Please don't post another question for the exact same topic. Thanks.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

What's the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?

Hello!!
What’s the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
I found two things as follows.
1. MAC support
2. USB dongle
Is there anything else?

Now I’m clear!!
But there are descriptions for each on your home page over view tab. Due to this forum restriction; I cannot put the URL here.
They say for each as follows.
HP Wireless Printing Upgrade Kit --- Retain full all-in-one wireless functionality: print, fax from your PC, scan, and access photo memory cards access and PC status
HP Wireless G Print Server --- Get the same functionality with your all-in-one: printing, scanning, photo memory card access, PC faxing, and printer statusSo I got confusion, that’s why I did not get the difference for them.
And I found wrong description on your HP support document page. I recommend that you correct it, because it put consumer into confusion and break to buy this product.
The title is “HP Wireless Printing Upgrade Kit - Setting up the HP Printer with the HP Wireless Printing Upgrade Kit in Windows .”
The wrong description is “NOTE: You must turn on the computer with the computer adapter in order to print to the wireless product” at last line of “Step two: Configure other computers to use the printer. “
You can erase this line!!

What is the difference between credit memo in invoice year and in next year

Hi!
I'm new here.I'm study SAP ERP.I don't know what is the difference between credit memo in invoice year and credit memo in next year (asset accounting).Can you show and give me an example, please!
Thanks and best regards!
Edited by: dinhtuan on Jun 28, 2010 3:10 PM

Hi,
Maybe have a look at the SAP Help for further information (http://help.sap.com) : e.g. 'Posting Credit Memos Integrated with Vendor' or 'Posting a Credit Memo Offset Against a Clearing Account'
Transaction type 105 for credit memo on current acquisition made in the current year, posting key 75. Or transaction type 160 for credit memo on acquisitions from prior years. posting key 75.
Note: determine if the asset was acquired in the current fiscal year or in a closed fiscal year (Display asset values).
If the asset was acquired in a fiscal year that is now closed, correct the past depreciation using a write-up (in that case check out and refer to Posting Write-Ups).
I hope this helps.
Kind regards,
Brigitte

What is the difference between these two reports MC.1 and MB5L

Hi
what is the difference between these two reports MC.1 and MB5L?
what is the Purpose of each report?
Material ledger is activated for this plant, we found some amount difference between these two reports, my client accounting department used to compare these two reports while year end/month end closing
Thanks
Raju

MC.1 will give you the report for plant analysis as per plant .
MB5L report will give you list of stock value as per G/L account wise.

What Is The Difference Between Save As Self-Contained Movie and Exporting

What Is The Difference Between Save As Self-Contained Movie and Exporting a Video as a Quicktime File

Save As places the file inside a .mov container. No re-encoding.
Your still have the option to save this file as "self-contained" (all the parts travel with the file) or "reference" (small file sized movie that merely "points" to the movie parts).
A reference movie can't play if the source files can't be found. If they are moved or deleted the reference movie will fail and it can't be re-created.
Exporting is done to convert one QuickTime format to another. Typically you do this with a high quality source file. Exporting previously compressed files is a bad idea that leads to unpredictable results.
QuickTime doesn't open WMP formats without third party software help (Flip4Mac is one). You can't convert (export) WMP formats without paying extra fees to upgrade their software.

What is the difference between i pod touch 4th generation and 5th generation because i am choosing what to buy

what is the difference between i pod touch 4th generation and 5th generation because i am choosing what to buy

5 has hd FaceTime, 4 does not, 5 has 5x better camera with flash, 5 is faster, has bigger and better screen and has siri, 4 does not. Also, 5 comes in more colours and has wriststrap (also 5 comes with better earphone and has smaller, reversible and faster charging connector)

What is the difference between acquiring lock on a CLASS and OBJECT (instance) of that class

What is the difference between acquiring lock on a CLASS and OBJECT (instance) of that class

What is the difference between acquiring lock on a CLASS and OBJECT (instance) of that class
The Java Tutotials has several trails that discuss both implicit and explicit locking, how they work and has code examples.
The Concurrency trail has the links to the other sections you need to review
http://docs.oracle.com/javase/tutorial/essential/concurrency/index.html
The Synchronized Methods and Intrinsic Locks and Synchronization trails discusse Synchronized Methods and Statements
http://docs.oracle.com/javase/tutorial/essential/concurrency/syncmeth.html
And the Lock Objects trail begins the coverage of explicit locking techniques.
http://docs.oracle.com/javase/tutorial/essential/concurrency/newlocks.html

What's the difference between task list release for order and release for c

What's the difference between task list release for order and release for cost?

Pallavi,
The status of the task list determines in which other application areas the respective task list may be used.
Release for costing: means that the task list can be used to calculate costs in Transaction IA16 i.e. the costs for the task list operations would be calculated if released for costing status is set.
Release for use in the order: Released for Order means that you can use the task list in an order i.e. you could include operations from a task list in an order.
Regards,
Usman

What is the difference between BO Designer connect BW QUERY and BW CUBEuFF1F

HI friend,
What is the difference between BO Designer connect BW QUERY and BW CUBE？
which one is better?
Best regards.
Howard

Hi Howard,
You can use autorization variables in SAP BW and maitain the security there, using that you can apply diferent security not only at Infoobject levet you can apply security per BEX Query.
Here is some informaion about BEX and SAP BusinessObjects
BI metadata feature _______SAP OLAP BAPI support level
Characteristics (incl. Time and Unit)_______ InfoCube/BEx Query
Hierarchies_______ InfoCube/BEx Query
Basic Key Figures_______ InfoCube/BEx Query
Navigational Attributes_______ BEx Query only
Display Attributes_______ InfoCube/BEx Query
Calculated Key Figures / Formulas_______ BEx Query only
Restricted Key Figures_______ BEx Query only
Custom Structures_______ BEx Query only
Variables_______ BEx Query only
I hope this help you.
BEst regards,
Fede

What is the difference between Fiscal year variant, Fiscal year and Calyear

hi,,
What is the difference between
1. Fiscal Year Variant (0FISCVARNT)
2. Fiscal Year (0FISCYEAR)
3. Calendar Year (0CALYEAR)
In what scenarios they should be used. If we are getting 0FISCVARNT data from ODS. Can we change into other in cube at update rules level or some other level?
How can we get factory calendar????
Message was edited by:
Avneet M

Hi Gurus
I was going through this thread and came up some more questions in my mind.
1. Do we need to set Fiscal Year, Fiscal Varient settings once for all in BW ? ( The path is given in one of the thread above ) need to know if this is one time setting / rebuilding the tables. what will happen when we select and execute factory calender and Fiscal Varient and Rebuild tables in transfer global setting ? Is this one time we have to do for whole BW system?
2. when we go to SCAL t-code what we need to do and what it do in the system ? I know its for Factory calender but just want to know what it does. It it also for one time during BW build phase ?
3. How can we link Factory calender and Fiscal year? IS it thro Fiscal varient ?
Pl help me to clear this doubt,thanks in advance.

What's the difference between 512M x 72, Quad Rank and 512M x 72, Dual Rank

Apart from the $500.00, what's the difference between the Netlist 512M x 72, Quad Rank
<http://eshop.macsales.com/item/Other%20World%20Computing/64FB4GD32GBK/>
and the OWC 512M x 72, Dual Rank
<http://eshop.macsales.com/item/Other%20World%20Computing/64FB4MPK32GB/>

well, I have exactly the same problem here.
- Thinkpad T60 with ATI x1400 + Samsung T240 (dual screen)
- gnome3 (fallback mode)
- uname -a
Linux ArchT60 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686 Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz GenuineIntel GNU/Linux
every first time urxvt was started, my screen looks quite similar as the screenshot made by Enunes. And the way to "clean" the screen also the same here. Then if I start urxvt terminal window again, the screen will stay in clean. Sometimes (not reproducible) urxvt can make X crash.
And I don't know if it is normal, I feel the GPU temperature is too high. I boot the laptop, waiting for 10 mins, there is no any X-application running in gnome3. the GPU temp is about 85 C . If I start a browser, open 4,5 tabs, temp can easily go to 88-90. If I watch some video even youtube online, the temp will be 95 ,97. the fan works very hard btw.
It seems everything is ok if there is no 2nd monitor connected.
I do have a xorg.conf file to configure thinkpad Trackpoint.
Section "InputDevice"
Identifier "TPPS/2 IBM TrackPoint"
Driver "evdev"
Option "CorePointer"
Option "Device" "/dev/input/by-path/platform-i8042-serio-1-event-mouse"
Option "GrabDevice" "False"
Option "Emulate3Buttons" "true"
Option "EmulateWheel" "true"
Option "EmulateWheelTimeout" "200" # adjust third button paste timeout.
Option "EmulateWheelButton" "2"
Option "YAxisMapping" "4 5"
Option "XAxisMapping" "6 7"
EndSection
Section "ServerLayout"
Identifier "myServerLayout"
InputDevice "TPPS/2 IBM TrackPoint"
# InputDevice "Keyboard0" "CoreKeyboard"
#option "AIGLX" "true"
EndSection
anybody has any clue ?
thanx in advance.

What is the difference in PS E12 between 'File Open' and 'File Open in Camera Raw' ?

Both routes launch a screen saying Camera Raw 8.3 - Canon EOS 5D Mark III?
Likewise on this screen there is 'Cancel' and 'Done' Buttons', what is the difference both close that screen.
I am assuming the 'Done' Buttons saves any manipulation of exposure or colours you may have made? and the 'Cancel' just forgets them?
Is there a manual for this product; that one can reference, screen by screen? explaining what each option actually does.

Chucky-Tiger wrote:
Both routes launch a screen saying Camera Raw 8.3 - Canon EOS 5D Mark III?
If you are opening a raw file (.CR2), both routes are identical, because you have to convert raw files in ACR anyway.
If you are opening a jpeg file, you can open the file directly in the Elements Editor (Open),
or
you can open it the the ACR module. The dialog is the same (or nearly) as for raw files, with the same sliders and features, including some you don't find in the editor : clarity, advanced denoising...
There are advantages in opening jpegs in ACR, especially because ACR works internally in 16 bits and in a wider color gamut. Very important for me is the fact that the ACR modules saves its edits as 'recipees' in the metadata section of the jpeg files, without changing any pixel value of the original.
Likewise on this screen there is 'Cancel' and 'Done' Buttons', what is the difference both close that screen.
I am assuming the 'Done' Buttons saves any manipulation of exposure or colours you may have made? and the 'Cancel' just forgets them?
Cancel does cancel every edit you have started. You are back to the original file.
'Done' saves your edits, as you rightly assume.
'Open' saves the edits and send them to the editor for further editing if you want, for local retouch or using layers for instance.
'Alt Open' does not saves the edits, but sends the edited result to the editor.
'Save' is only used if you wish to convert the raw files to the DNG format.

What is the difference? 2.2 vs 2.5   and 256 Flash vs 512 Flash      speed or what ?

What's the difference besides price - 2.2 vs 2.5 and 256 FLASH vs 512 FLASH?    On pins and needles whether I should wait or buy a Macbook Pro now. Last I saw was 2014 midyear the latest. All I do as a senior citizen is play internet based games and watch streaming movies (Retina is why I'm getting the Macbook Pro)
Should I wait until the followings says 2015?    feel free to email me with advice at ******- thank you for your time
MacBook Pro (Retina, 15-inch, Mid 2014)
MacBook Pro11,2
MacBook Pro11,3
MGXA2xx/A
MGXC2xx/A
15.4”/2.2 Quad-core i7/16GB/256-Flash
15.4”/2.5 Quad-core i7/16GB/512-Flash
<Personal Information Edited by Host>

thank you so much Dominic does CPU do anything to speed up an internet game or graphics in this case - or would I not even notice - I play Farm Town - not sure if I understand. I simply want fastest and worried Apple will come out with even faster a week later - do you have any rumors about that. Last I heard it wouldn't be till June and I can not wait that long. thanks again Apologies for my questions - sort of confused

What's the difference between using java directly in JSP and java bean

What is the difference if I use java code directly in JSP or use java bean in JSP?
Which class to use for receiving the passed parameter from html or java script? Any difference for java code and java bean in the way receiving the passed data?
How can I pass string from jsp to html or java script?

1 Cleaner pages
2 you have to write the class and use set and get methods
3 What do you mean when saying passing string from jsp to html??, do you mean the value you can use <%=variablename%>

What are the differences between TestStand Version 1.0.2 and 1.0.3?

I have TestStand version 1.0.2 and have a customer that uses 1.0.3. I am updating test software for that customer and need to know if I can use TestStand 1.0.2. What are the differences between 1.0.2 and 1.0.3?

vc -
The Whatsnew.txt file for TestStand 1.0.3 contains the following text:
Changes from TestStand 1.0.2 to 1.0.3
TestStand 1.0.3 includes a translation to Japanese. It also
includes other fixes mostly related to translation issues.
1) Configure Database Options menu item was not localized.
2) Dismissing a modal CVI dialog brought a random window to the front.
3) Removed text from operator interface splash screens
4) Resized operator interface panels
5) In the TestStand - Sequence Display.vi of the LabVIEW operator interface, the
following control descriptions didn't use resource strings:
- Sequence Description:
- Current Test:
- Number of Tests:
6) The Engine Installation Wizard wasn't localizable.
7) Flexible MessageBox sometimes displayed only 1-2 lines. This was seen in the
Edit Database Options Help dialog and the Adapter Configuration dialog in the
CVI operator interface.
8) The buttons in the Automation Adapter Configuration dialog were not localized.
9) Font for the Add Directory to Search Directories checkbox on Find File dialog
was incorrect for Japanese Windows.
10) Dialog used to browse for directory to specify the report location was not translated.
11) Database Viewer was not localized correctly.
Scott Richardson
National Instruments

OSD: What is the difference booting into winpe from pxe/media and booting in winpe from OS/Vista?

Similar Messages

Maybe you are looking for