OSDB migration issues
Hi
now i am planing to do the migration for CRM 5.0 system from Solaris-DB2 to AIX-DB2.
i have the following . please update me
do i know need order extra tools for migration other then current version software. current version kernal have all programs reqired for migration right?. do we need to ask SAP to send any kind of software.
as i know i can use the SAPINST from there it call all tools.
please advice me as soon as possible.
Thank you
Vish
Hi Vswanadha,
1. Do we can Split the stacks at the same time while doing OS Migration? ( and Splitting Stacks will going keep into Different hosts)
Technically this is possible, but I don't know if it is supported by the standard way of a heterogeneous system copy.
2. If we split the Stacks into different hosts then do we have any problems in CRM system
No, you shouldn't. Check the following link for this. Only for PI and MI systems, a dual stack is mandatory.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d074d7de-8d55-2b10-1e94-fb2e9d2893d1
3. If we get any issues then SAP will support and do you have any SAP recommended documents to separate the ABA and JAVA Stacks or SAP will not Support?
If the configuration and the way to get it is supported by SAP, you don't have any problems. So the seperation of the CRM stack is supported, however I don't know if it can be done in one step during your heterogeneous system copy. You might have to copy your system twice, so copy the dual stack system twice and remove the ABAP stack on the one site and the java stack on the other site afterwards.
4. Do we can do database upgrade While doing the OS migration (like export DB2 8.2(sun) to import DB2 9.5(AIX)) and if yes Is advisable to do like that?
I know this can be done for Oracle (homogeneous system copy), so I can imagine that it is possible for DB2 as well. Since I don't have DB2 knowledge, I cannot answer this question regarding this subject.
Before you can start your migration, you have to fill in a questionnaire at SAP. If you mention your strategy above you know directly if it is supported by SAP.
You can also buy some remote consulting hours at SAP for all your questions.
Some additional info:
Note 547314 - FAQ: System Copy procedure
Note 82478 - SAP system OS/DB migration
Kind regards,
Mark
Similar Messages
-
10g Migration issue in forms related to graphics
Hi..
I am facing a 10G migration issue realted to graphics in Forms.
A form got migrated from 6i to 10g and it has Graphics in it but it is not displaying the graphics in Runtime after
migration.can anyone help me reagrding how to resolve this Graphics issue in 10g.
Thanks,
VenkatGraphics no longer exists in Developer Suite 10G. You have to replace the functionality , e.g. by using BI Beans. Have a look at the samples page http://www.oracle.com/technology/sample_code/products/forms/index.html
-
When i upgraded from 9.2.3 to 9.3.1 I had migration issues, where most my photos ended up in a restored event called restored photos. But then they don't come up in faces anymore. So can i upgrade to 9.3.2 and then just rebuild my photo library ? I want to upgrade to mountain lion. But concered about my photo library. So I restored my whole computer back to an earlier date, becuase I couldn't figure out how to restore just my photo library. Advice?
Best way is to restore your backup from before the problem, rebuild it and update it again
LN -
Exchange 2013 Migration issues
I have three issues and decided to list them here. Please pick and choose to assist. Thanks in advance.
Environment:
Mixed 2007 SP3 R12 and 2013 CU3. 2007 Environment was webmail.domain.com. I installed new Exchange 2013 (1 CAS, 1 Mailbox) according to:
http://technet.microsoft.com/en-us/library/ff805032(v=exchg.150).aspx. Exchange 2007 is now legacy.domain.com and Exchange 2013 CAS is webmail.domain.com.
Machine 1: Windows 8.1, not domain joined, using Outlook Anywhere external. Outlook 2013
Machine 2: Windows 7, domain joined, using Outlook Anywhere internal. Outlook 2010 SP2
I have migrated 1 user so far to Exchange 2013. This user was a Domain Admin. I have removed that membership. I checked the box to inherit permissions of the security of the object and reset the AdminCount attribute in ADSIedit to 0 and verified this replicated
to all domain controllers. ( I originally thought this to be the issue with it prompting for the password. )
Here is a Get-OutlookAnywhere cmdlet...
ServerName : EXCHANGE2007SVR
SSLOffloading : False
ExternalHostname : legacy.domain.com
InternalHostname :
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Basic
IISAuthenticationMethods : {Basic}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : False
MetabasePath : IIS://EXCHANGE2007SVR.domain.local/W3SVC/1/ROOT/Rpc
Path : C:\WINDOWS\System32\RpcProxy
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 8.3 (Build 83.6)
Server :
EXCHANGE2007SVR
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=EXCHANGE2007SVR,CN=Servers,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=DOMAIN,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=local
Identity : EXCHANGE2007SVR\Rpc (Default Web Site)
Guid : 4901bb14-ab81-4ded-8bab-d5ee57785416
ObjectCategory : domain.local/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 12/31/2013 4:08:04 PM
WhenCreated : 7/18/2008 10:56:46 AM
WhenChangedUTC : 12/31/2013 9:08:04 PM
WhenCreatedUTC : 7/18/2008 2:56:46 PM
OrganizationId :
OriginatingServer : DC1.domain.local
IsValid : True
ObjectState : Changed
ServerName :
EXCHANGE2013SVR
SSLOffloading : True
ExternalHostname : webmail.domain.com
InternalHostname : webmail.domain.com
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://EXCHANGE2013SVR.domain.local/W3SVC/1/ROOT/Rpc
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : EXCHANGE2013SVR
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=EXCHANGE2013SVR,CN=Servers,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=DOMAIN,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=local
Identity : EXCHANGE2013SVR\Rpc (Default Web Site)
Guid : d983a4b1-6921-4a7f-af37-51de4a61b003
ObjectCategory : domain.local/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 1/7/2014 11:29:05 AM
WhenCreated : 12/31/2013 1:17:42 PM
WhenChangedUTC : 1/7/2014 4:29:05 PM
WhenCreatedUTC : 12/31/2013 6:17:42 PM
OrganizationId :
OriginatingServer : DC1.domain.local
IsValid : True
ObjectState : Changed
ISSUE 1
Issue: On Machine 1 (reference above) Windows Security prompt that says "Connecting to
[email protected]". Almost always prompts when Outlook is first opened. Afterwards (if it goes away) seemingly random on when it asks for it. I put in the credentials (absolutely correct) and it fails and prompts again.
I always check the box for it to save the password. To get rid of it, I click the Cancel button at which Outlook reports "NEED PASSWORD", but still acts fine sending and receiving emails. Eventually the "NEED PASSWORD" sometimes changes
to say "CONNECTED", but it works regardless.
No issues on Machine 2 so I don't know where the problem might be as there are a lot of variables in play here.
ISSUE 2
Migrated user is unable to open Public folders from Exchange 2007.
Cannot expan the folder. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance. (/o=...).
This error occurs on Machine 1, Machine 2 and from OWA, same error each time.
ISSUE 3
Apps. Installed by default are 4 apps (Bing Maps, Suggested Meetings, Unsubscribe, Action Items). I have made sure the apps are enabled in OWA and they show up in mail items on both Machine 1 (Outlook 2013) and OWA. They do not show up in Machine 2 (Outlook
2010). I'm assuming that isn't supported.
In OWA, when I go to the installed apps listing it shows all of the apps but has a broken link on the image describing the app.
When I click the app in either Outlook 2013 or in OWA, I get "APP ERROR, Sorry we can't load the app. Please make sure you have network and/or internet connectivity. Click "Retry" once you're back online.
Current workaround is just disabling them through OWA.Hello,
In order to avoid confusion, we troubleshoot a issue per thread usually.
For your first isue, I agree with Ed's suggestion to check if your certificate name is correct.
Besides, I recommend you change ExternalClientAuthenticationMethod from Basic authentication to Negotiate authentication to check the result.
For the second issue and third issue, please create a new post.
If you have any feedback on our support, please click here
Cara Chen
TechNet Community Support -
IPhoto 11 Migration Issue: Unique Circumstance (Boot Drive Crash)
Hello good folk,
I have a migration issue with iPhoto 11 due to a boot drive crash.
The issue: I have imported my library database file and all of my 25,000 photos into a clean install of iPhoto 11. All of the events are imported, but all of the photos appear in the very first event. All of the other events are populated with the correct number of photos, but none of the actual photos have been linked.
I know all about holding down option-click and option-command-click to rebuild libraries, directories, etc., as I have read about in multiple posts. But many tries haven't gotten me to success.
Any suggestions? What am I doing wrong?
Here are the specifics of the chain of events, in case it helps [sorry for all the details, but it might help]:
1. Was running iPhoto 09 in 10.5.8, my boot drive bit the dust.
2. I was able to save most of my data from the drive. Due to corrupt files, I was forced to back up unconventionally: instead of saving the entire library, which I could not do, I unpacked the iPhoto library and, from the Originals folder, I copied over entire year folders (2002, 2003, etc.) onto a non-boot drive. This worked.
3. I then installed the new boot HD and installed 10.6.X.
4. I installed fresh copy of iPhoto 11 and updated the software.
5. In iPhoto 11, I threw away the database and replaced with the recovered database from the old boot drive.
6. I copied all of the year photo folders (from the "Originals" folder on the manual backup disk) wholesale into the "Masters" folder of the new iPhoto 11 install.
7. [I could not use Migration Assistant to do this because Migration Assistant, for some reason, will not migrate from a non-boot drive that's installed internally on my Mac Pro.]
8. I option-command-clicked open iPhoto and selected:
-- Repair iPhoto Library Database
-- Rebuild small thumbnails
-- Rebuild all thumbnails
-- Examine/repair permissions.
9. I did this twice. The first time, the events from the database installed correctly, but the photos did not show up. The second time, after a very long time rebuilding the thumbnails, all 25,000 photos showed up, but in the very first event. All of the other events remain blank.
10. I then did an option-click, and chose to open the main library. I did that, but nothing changed.
11. Perhaps interestingly, when I option-click, it says that my manual backup from my internal drive -- where I did my emergency backup -- remains as the "default." The main iPhoto library is not the default.
12. That's where I am now. I really don't want to have to install manually without the data, when all of the events imported fine, and all of the photos are there, but in the wrong event.
Sorry for the long-windedness. Any suggestions are much appreciated!
JohnI have imported my library database file and all of my 25,000 photos into a clean install of iPhoto 11. All of the events are imported, but all of the photos appear in the very first event. All of the other events are populated with the correct number of photos, but none of the actual photos have been linked.
You can not "Import" an old iPhoto library into another iPhoto library - it is not the way it works - if your old iPhoto library is available you simply place it in the pictures folder and launch iPhoto - no importing involved
you can not piece together an iPhoto library - which is why having a backup up is critical to avoid lost data
If your iPhoto library is not available as a single entity then you will have to start over and create a new library and import the photos into it losing all edits, metadata changes, etc
And if the future remember to always backup soon and often -it is the only way to avoid data loss due to failures - hardware, software and/or human
LN -
Countdown Timer Error Msg: "Warning: 1090: Migration issue"
Hey folks,
New to Flash here (using CS3), trying to create a countdown
timer.
Following is the error message I receive when trying to test
the
movie:
"Warning: 1090: Migration issue: The onEnterFrame is not
triggered
automatically by Flash Player at run time in ActionScript
3.0. You
must first register this handler for the event using
addEventListener
( 'enterFrame', callback_handler).
Does anyone know what this means? And please "dumb it down"
for this newbie. :)
Following is the actionscript I'm using:
this.onEnterFrame = function() {
var today:Date = new Date();
var currentYear = today.getFullYear();
var currentTime = today.getTime();
var targetDate:Date = new Date(2007,5,10);
var targetTime = targetDate.getTime();
var timeLeft = targetTime - currentTime;
var sec = Math.floor(timeLeft/1000);
var min = Math.floor(sec/60);
var hrs = Math.floor(min/60);
var days = Math.floor(hrs/24);
sec = String(sec % 60);
if (sec.length < 2) {
sec = "0" + sec;
min = String(min % 60);
if (min.length < 2) {
min = "0" + min;
hrs = String(hrs % 24);
if (hrs.length < 2) {
hrs = "0" + hrs;
days = String(days);
var counter:String = days + ":" + hrs + ":" + min + ":" +
sec;
time_txt.text = counter;
Thanks in advance!!!It just means that you can't do things the "old" way. You
have to use the
AS3 event model, like so:
this.addEventListener("enterFrame", enterFrameHandler);
function enterFrameHandler(evt:Event) {
var today:Date = new Date();
var currentYear = today.getFullYear();
var currentTime = today.getTime();
var targetDate:Date = new Date(2007,5,10);
var targetTime = targetDate.getTime();
var timeLeft = targetTime - currentTime;
var sec = Math.floor(timeLeft/1000);
var min = Math.floor(sec/60);
var hrs = Math.floor(min/60);
var days = Math.floor(hrs/24);
sec = String(sec % 60);
if (sec.length < 2) {
sec = "0" + sec;
min = String(min % 60);
if (min.length < 2) {
min = "0" + min;
hrs = String(hrs % 24);
if (hrs.length < 2) {
hrs = "0" + hrs;
days = String(days);
var counter:String = days + ":" + hrs + ":" + min + ":" +
sec;
time_txt.text = counter; -
Migrating issues! please help. At the moment I have two identities and my apps adobe and microsoft office 2008 do not work. I migrated from a macbook to a pro and everything seems crazy. I'm not an It guru so some of the solutions proposed at other forums do not work for me. I would like to go back to the original setup of the macbook pro and use the setup assitant to transfer my files from the old mac. Hopefully this would prevent some of the issues i'm currently facing. what do you reckon?
See the Pondoni article - particularly about a 'second chance' to use Setup. ANd don't do it wirelessly this time - either have both computers hardwired to the same router using Ethernet cabling or use the FireWire mode as discussed here - http://support.apple.com/kb/HT4889.
Clinton -
I'm not sure if this forum is the right place to post 11g migration issues? If not, maybe someone can let me know where to do that. According to the article (http://www.oracle.com/technology/products/jdev/collateral/migration.html) which describes the manual changes you'll need to make after migrating a 10.1.3.4 app to an 11g (11.1.1.1.0 in my case), 'In this release, the migration wizard automates substituting references to adfFacesContext by the Trinidad equivalent requestContext in pages and page definitions...' I have found that this isn't necessarily the case. For example, in one of my pageDefs, the following reference was not changed to requestContext - RefreshCondition="#{!adfFacesContext.postback}". Also, I still see references to adfFacesContext in some of my jspx's as well. Just wanted to let someone know.
Update: Not only does the migration process not replace 'adfFacesContext' with 'requestContext' in pageDefs and jspx's, but when I do a search on 'adfFacesContext' so that I can locate all references that need to be replaced manually, the search comes back with 0 hits, when I know there are many. So, apparently the search mechanism is broken too.
-
10.1.3.1 : JSF migration issues : "awijeyek build" versus "sobryan build"
hi
I've noticed, and read about, some issues with adf-faces-impl.jar and jsf-impl.jar when migrating between recent JDeveloper versions.
If I create a simple JSF JSP page in "JDev 10.1.3" and I "migrate" that to "JDev 10.1.3.1" I observe what has been described in bug 5607187 on October 18, 2006. The project in "JDev 10.1.3", before migration, contains "adf-faces-impl.jar 10_1_3_0_4" and "jsf-impl.jar 1_1". The migrated project in "JDev 10.1.3.1" contains the new "adf-faces-impl.jar 10_1_3_1_0 sobryan", but still the old "jsf-impl.jar 1_1" instead of "jsf-impl.jar 1.1_02-b08".
Using the same scenario, I migrate from "JDev 10.1.3.1 developer preview" to "JDev 10.1.3.1". The project in "JDev 10.1.3.1 developer preview", before migration, contains "adf-faces-impl.jar 10_1_3_1_0 awijeyek". The migrated project in "JDev 10.1.3.1" still contains "adf-faces-impl.jar 10_1_3_1_0 awijeyek" and not "adf-faces-impl.jar 10_1_3_1_0 sobryan". (They both use "jsf-impl.jar 1.1_02-b08".)
This causes the following exception when I run the migrated application:
java.lang.NoSuchMethodError: oracle.adf.view.faces.context.AdfFacesContextFactory.createContext(Ljava/lang/Object;Ljava/lang/Object;)Loracle/adf/view/faces/context/AdfFacesContext;
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:187)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:106)
...This seems to be caused by an API change in AdfFacesContextFactory:
In "JDev 10.1.3.1 developer preview" adf-faces-api.jar\oracle\adf\view\faces\context\AdfFacesContextFactory.class the createContext() methods looks like
public abstract oracle.adf.view.faces.context.AdfFacesContext createContext(java.lang.Object p1, java.lang.Object p2) { }While in "JDev 10.1.3.1" adf-faces-api.jar\oracle\adf\view\faces\context\AdfFacesContextFactory.class the createContext() methods looks likepublic abstract oracle.adf.view.faces.context.AdfFacesContext createContext(oracle.adf.view.faces.webapp.wrapper.ContextWrapper p1, oracle.adf.view.faces.webapp.wrapper.RequestWrapper p2) { }This method gets called by oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl which is in adf-faces-impl.jar that has a migration issue as explained above.
The embedded OC4J also displays this warning:WARNING: Code-source D:\oracle\jdevstudio10131\jlib\adf-faces-impl.jar (from <classpath> in D:\temp\JSFMigrationIssue10131dp-mig10131\View\public_html) has the same filename but is not identical to /D:/temp/JSFMigrationIssue10131dp-mig10131/View/public_html/WEB-INF/lib/adf-faces-impl.jar
(from WEB-INF/lib/ directory in D:\temp\JSFMigrationIssue10131dp-mig10131\View\public_html\WEB-INF\lib). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader current-workspace-app.web.JSFMigrationIssue10131dp-View-webapp:0.0.0.(*) workaround
Manually replacing the adf-faces-impl.jar in the WEB-INF\lib folder of my project with the one in the "JDev 10.1.3.1"\jlib folder solved my "NoSuchMethodError" problem.
(*) suggestion
Maybe some of this deserves a place on
http://www.oracle.com/technology/products/jdev/htdocs/10.1.3.1/10.1.3.1addendum.html
(*) about the versions
"JDev 10.1.3" = JDeveloper 10g Studio Edition Version 10.1.3.0.4 (SU5) : Build JDEVADF_10.1.3_NT_060125.0900.3673
"JDev 10.1.3.1 developer preview" = Oracle JDeveloper Developer Preview Studio Edition Version 10.1.3.1.0.3914 : Build JDEVADF_10.1.3.1.0_NT_060807.1321.3914
"JDev 10.1.3.1" = JDeveloper Studio Edition Version 10.1.3.1.0.3984 : Build JDEVADF_10.1.3.1.0_NT_061009.1404.3984
(*) about JAR files
- "adf-faces-impl.jar 10_1_3_0_4" = "JDev 10.1.3" adf-faces-impl.jar\META-INF\MANIFEST.MF
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.5.3
Created-By: Apache Maven
Built-By: awijeyek
Package: oracle.adfinternal.view.faces
Build-Jdk: 1.4.2_09
Extension-Name: adf-faces-impl
Specification-Title: ADF Faces Implementation
Specification-Vendor: Oracle Corporation
Implementation-Title: oracle.adfinternal.view.faces
Implementation-Vendor: Oracle Corporation
Implementation-Version: 10_1_3_0_4- "jsf-impl.jar 1_1" = "JDev 10.1.3" jsf-impl.jar\META-INF\MANIFEST.MF
Manifest-Version: 1.0
Created-By: Apache Ant 1.5.1
Specification-Title: JavaServer Faces
Specification-Version: 1.1
Implementation-Title: 'jsf-impl': JavaServer Faces RI
Implementation-Version: 1_1
Implementation-Vendor: Sun Microsystems, Inc.
Implementation-Vendor-Id: com.sun
Extension-Name: com.sun.faces- "adf-faces-impl.jar 10_1_3_1_0 awijeyek" = "JDev 10.1.3.1 developer preview" adf-faces-impl.jar\META-INF\MANIFEST.MF
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.5.3
Created-By: Apache Maven
Built-By: awijeyek
Package: oracle.adfinternal.view.faces
Build-Jdk: 1.4.2_12
Extension-Name: adf-faces-impl
Specification-Title: ADF Faces Implementation
Specification-Vendor: Oracle Corporation
Implementation-Title: oracle.adfinternal.view.faces
Implementation-Vendor: Oracle Corporation
Implementation-Version: 10_1_3_1_0- "jsf-impl.jar 1.1_02-b08" = "JDev 10.1.3.1 developer preview" jsf-impl.jar\META-INF\MANIFEST.MF (exactly the same file in "JDev 10.1.3.1")
Manifest-Version: 1.0
Created-By: Apache Ant 1.5.1
Specification-Title: JavaServer Faces
Specification-Version: 1.1
Implementation-Title: 'jsf-impl': JavaServer Faces RI
Implementation-Version: 1.1_02-b08
Implementation-Vendor: Sun Microsystems, Inc.
Implementation-Vendor-Id: com.sun
Extension-Name: com.sun.faces- "adf-faces-impl.jar 10_1_3_1_0 sobryan" = "JDev 10.1.3.1" adf-faces-impl.jar\META-INF\MANIFEST.MF
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.5.3
Created-By: Apache Maven
Built-By: sobryan
Package: oracle.adfinternal.view.faces
Build-Jdk: 1.4.2_09
Extension-Name: adf-faces-impl
Specification-Title: ADF Faces Implementation
Specification-Vendor: Oracle Corporation
Implementation-Title: oracle.adfinternal.view.faces
Implementation-Vendor: Oracle Corporation
Implementation-Version: 10_1_3_1_0(*) about the scenario
I created a simple JSPX document using the "Create JSF JSP wizard". On the "Create JSF JSP - Stef 4 of 5: Tag Libraries" panel I selected "ADF Faces Components <version>" and "ADF Faces HTML <version>". In "JDev 10.1.3" this version was "10_1_3_0_4", In "JDev 10.1.3.1 developer preview" and "JDev 10.1.3.1" this version was "10_1_3_1_0". I also added a PanelPage component from the "ADF Faces Core" component pallet.
(*) about migration
Migrating to another JDeveloper version is just opening the application (.jws file) in the new JDeveloper. I got an "Open Warning" that says "You are about to migrate the application <path>\JSFMigrationIssue.jws to JDeveloper version 10.1.3.1.0 file format. ..." where I answer "Yes" to the question "Do you want to migrate these files?". After that I get "Migration successfilly completed for the following file(s): ...".
(*) related threads
"ADF Faces; how to see bug fix in 10.1.3.1 (need to manually copy jars?)"
ADF Faces; how to see bug fix in 10.1.3.1 (need to manually copy jars?)
"10.1.3.1 first crash after migration"
10.1.3.1 first crash after migration
regards
Jan VerveckenJan, <br>
<br>
yes that's correct. <br>
Bug 5615982 is about migrating from JDeveloper 10.1.3.1 Developer's Preview (Build 3914), as the symptom and the fix are different when migrating from JDeveloper 10.1.3.0 (Bug 5607187) or 10.1.3.1 Developer's Preview - see details [Here]<br>
<br>
Bug 5615982 is now available on MetaLink. <br>
We also published an Alert Note 395980.1<br>
<br>
FYI, the content of MetaLink is refreshed every 2 hours (00:20, 02:20, ..., 12:20, ... 22:20 - GMT time)<br>
<br>
Regards, <br>
<br>
Didier.<br> -
10.1.3 Migration Issue with data-sources.xml
Hi:
Running into lots of migration issues for an application built in 10.1.3 EA, migrating to 10.1.3. production, mostly in the BC project. Here's one: the database connections built in EA were not carried over to prod, so they needed to get re-built. No biggie. But now the data-sources.xml file in the model project has duplicate entries for my data sources. I have tried directly editting that file and removing the duplicates, but when I go to run my application (ADF Faces & ADF BC) JDeveloper hangs. When I abort JDev and re-start it, the duplicate entries are back in data-sources.xml (and yes, I did save the file after making the changes). It seems that the xml file is built dynamically from definitions stored elsewhere. Where is the source? What will I need to modify to get the changes to take?
Thanks.
Johnny LeeThere is new control over when/whether JDeveloper add/updates your data-sources.xml file for the embedded server. The settings are located here:
Tools | Embedded OC4J Server Preferences | Current Workspace | Data Sources
There are some settings there that control whether/when we update the data-sources.xml -
Oracle Rac as part of OSDB Migration
Hello Gurus,
We are going ahead with OSDB Migration from HP-UX to Linux. Here as HA solution, we plan to implement Oracle RAC on the target systems. Where as the current environment is non RAC.
As part of OSDB migration we are not confident in doing it on Oracle RAC. Documentation for Oracle RAC on SAP explains first go for single instance installation on oracle cluster filesystem and implement RAC as a high availability solution with SAP Enqueue Replication service. Then do the backup and restore process from non RAC system to RAC.
But in our scenario we should go for EXPORT/ IMPORT process.
Please guide us in going ahead with the right approach.
Surendra> As part of OSDB migration we are not confident in doing it on Oracle RAC. Documentation for Oracle RAC on SAP explains first go for single instance installation on oracle cluster filesystem and implement RAC as a high availability solution with SAP Enqueue Replication service. Then do the backup and restore process from non RAC system to RAC.
>
> But in our scenario we should go for EXPORT/ IMPORT process.
This is not an antagonism, you can do a single instance installation by doing the import. Basically an "import" is a new installation with the export you've done before.
Markus -
Mail Client Switch (Email Migration Issue)
I am having mail migration issues.
I am not able to import mails, calender and address data from windows outlook to my mac entourage.
It seems entourage import function is not supporting this feature.
Is there any other way I can Import all my data?For migrating from MS outlook to Entourage you need to get your pst files in mbox format & that can be done by importing pst files in thunderbird, it will convert your existing pst files to mbox format. This can be done only you have access to Machine Outlook Installed with.
Else You can give a try to an application here:
Pst Converter Pro
hope this helps. -
Hi,
I have to migrate an existing application from Weblogic 8i to Sunone Application Server 8.
Can anyone please help me to know the kind of problems encountered in such a migration.
Also, If i have to port an application which uses 'Mssql' as the backend in weblogic and migrate it to sunone server and use Oracleas backend what r the changes to be made??
Thanks in advance
GeetaHi,
For addressing such migration issues, Sun has a team that can help you out. They even have a product that can migrate your application automatically. You can reach them at [email protected]
Anway, if your application does not use any weblogic specific APIs, then the migration should be relatively straight forward. All you have to do is to translate the weblogic specific deployment descriptors to sunone specific descriptors, which can also be done automatically to a large extent using the migration tool product from Sun Microsystems. I suggest you contact that team.
Sahoo -
OSDB-Migration mit UC-Konverierung gemeinsam - ist das erlaubt ?
Ich habe eine Unicode-Konvertierung durchzuführen und eine OSDB-Migration (in einem System).
Da die Arbeitsschritte vieles gemeinsam haben möchte ich dies in einem Schritt tun.
Erlaubt das die SAP, gibt es hierzu Unterlagen im SAP-Net bzw. SDN ?
Source-System: ECC 6.0, Nonunicode, Oracle, HP-UX(Itanium)
Target-system: ECC 6.0, Unicode, DB2, Linux auf VM(Intel-based)
Danke für Eure Antwort(en)Dear Roland,
I am answering in English since this is the language used in this forum.
It is supported (and also recommended) to do a Unicode conversion and an OS/DB migration at the same time.
If you have a look at the system copy guide (to be used for the migration), you will see that Unicode in the target release is always an option.
Also have a look at SAP note 1322715 point 28.
Best regards,
Nils Buerckel
SAP AG
Edited by: Nils Buerckel on Oct 1, 2010 2:18 PM -
Hi,
I am unable to find the required osdb migration guide in www.service.sap.com/osdbmigration, can anybody help where can i found the required osdb migration guides.Hello there,
What is the product? The guide could be at http://service.sap.com/instguides. What you are doing could also be considered an heterogeneous system copy.
Best regards,
Miguel Ariñ
Maybe you are looking for
-
Although my summary report indicates the total responses received for comments, it does not show the actual comments. I used a forms central template, perfect for what I need, however I really need the comments to be visable in the report. help pleas
-
Hardware Requirement for Oracle Database
Hi, i need help, i wanna build new server with some requirement of total user who is connect, size of database n etc. Can u tell me how to calculate ram size, processor need and etc to build good server for my company need? I remember Oracle before h
-
SAP Portal 7.31 - Fiori integration
Dear All, We are planning to configure Portal –Fiori. Portal is totally with BI reports. Should we need to do any SSO for Fiori ?? Current Portal level is 7.31 SP20. There are many docs in detailed on only particular area but I didn't see any step b
-
Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?
-
When I look at videos from an account that I subscribe to, is there any way to change the sort order? They seem to be sorted in descending order by number of views. I would like to sort them in decending order by upload date so that I can easily fi