OSDCOMputer name issue - MDT2013+SCCM 2012

Hi ,
I have setup Sequence table along with prefix, and a stored procedure to update the computeridentity table, all works fine it updates the sequence number and computer name BUT
i am unable to get the OSDCOMPUTERNAME set to same name as computeridentity table has when its imaged with windows 7 it always sets to default MINIT-xxx name.
i am using stand alone media created form SCCM 2012.
Please suggest how to get the same machine name as updated in Computeridentity table. any settings to be done on CS.ini ?
Thanks
Shuaib

You also need the sections to pull the information from the database.
see this link which explains what happens
http://www.windowsnetworking.com/articles-tutorials/windows-7/Deploying-Windows-7-Part16.html
You will see multiple sections such as CSettings, RSettings etc which will need adding. I would sugest you configure your MDT instance as shown n the above post then copy the relevant sections rom your MDT CustomSettings.ini in to your SCCM CustomSettings.ini
you have shown above.
You obviously need to make sure you amend the priority list to include these new sections.
I hope that makes sense?
Thanks,
Adam

Similar Messages

Adobe Creative Cloud Enterprise Deployment Issues using SCCM 2012 R2

Hi,
I have been trying to deploy Adobe Creative Cloud Enterprise to Windows 8.1 machines that are identical, using SCCM 2012 R2.
The Adobe package seems fine, because it seems to deploy successfully to some machines. And SCCM 2012 R2 has been configured correctly, as I can deploy other software using it, and again, it deploys Adobe CC successfully to some of the machines.
I have tried comparing the package that is downloaded on the test machine/client machine, with the original package on the distribution point, using Beyond Compare, and there are no differences.
I have contacted Adobe Enterprise Support, and they asked me to send to them log files from Event Viewer, the msi installer, and other Adobe logs, from the machine that failed the deployment. However, after Adobe studying them, they told me that they could not identify any problems... Strange, because I could have sworn that I saw error 1603 pop up over 20 times on different machines indicating that the 'Set-up.dat' file had a problem with it.
After all the testing on over 20 identical machines (same hardware/same software), using different configurations on SCCM 2012 R2 and the client machines, I still can't seem to have a reliable solution to deploying Adobe CC.
The fact that it deploys successfully on one machine and fails on another, or sometimes deploy to two machines and fail on another (simultaneously), is something that I don't understand.
Another thing is that, if I retry the deployment 10-15 times after it failed the first time, it might go through...
Adobe Enterprise Support asked me if they could remote into a machine that failed the deployment to have a look at it and I agreed to that option, but it seems like my issue has been ignored because they never got back to me.
Has anyone had this kind of problem or anything similar before?
I need to be able to deploy this remotely to 100+ machines. So installing manually is not an option.
Any help is appreciated.
This was posted in the wrong section a few days ago. I'm hoping I can get some help here.
Case Number: 1862659812
UPDATE: I spoke to Adobe Customer Support and after 1.5 hours on the phone with a remote session going on, problem was still not solved or identified. Additional log files have been sent and now I'm waiting for a call back.

Hi Robert,
We seem to be having a very similar issue. Our installs would randomly fail with error code 1603 and an error message about a fault in Set-up.dat. Failure rate was near 95% on our 900 machines. Adobe Support and Karl having been looking into our issues but so far no solution has been found.
Having done a lot of investigating we've managed to deploy our package using a schedule task running as a domain admin. This is a nasty solution and we don't intend on using this permanently, but we needed to get the package out.
Are you seeing any of the following:
Entries in PDApp.log:
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The Bootstrapper Process is (5).Stopping the installation process.
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The return code from the Adobe Installer Process is (33).Stopping the uninstallation process.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to find the pdb database.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to get the local payload database handle.
Event Log:
Faulting application name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Faulting module name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Exception code: 0xc0000005
Fault offset: 0x000d7c52
Faulting process id: 0xb40
Faulting application start time: 0x01d072a073861622
Faulting application path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Faulting module path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Report Id: c86d9216-de93-11e4-8284-782bcb99e284
Faulting package full name:
Faulting package-relative application ID:
Installer Log
Indicates it can't find the Media_db. We noticed that the folder C:\Program Files (x86)\Common Files\Adobe\caps doesn't get created on the machines were the install fails, so error message is correct in that there isn't a Media_db.db. Sysinterals Process Monitor seems to show that the setup tried to create the folder/files but they don't actually get created. Copying a Media_db into the folder from another machine seems to allow the installation to almost finish, but unsurprisingly you end up with problems later on.

Past Due - Will be installed issue in SCCM 2012

Deployment of an application task sequence after the initial OS deployment task sequence is working fine, but several application deployments that is deployed to a role collection does not
install even if they are deployed required and deadline is passed. As you can see from print screen all the jobs is received by the agent, so the question is, why do they not start
installing automatically?
Checked the Computer Agent settings and all the settings were also intact including “Additional Software manages the deployment of application” setting was set to No so there
is something else due to which this is not installing.
Checked in the below post for the same issue
http://blogs.msdn.com/b/rslaten/archive/2013/11/26/past-due-applications-not-installing-in-sccm-2012.aspx#comments
as per it issue may be with Incorrect revision number within any of the task sequences
targeted to a machine. Now how do I find the application with the incorrect revision number in any of the task sequences targeted to the machine?
Also not sure how to go about verifying the correct revision numbers in the task sequences if this is the issue in my case
Please suggest.

Have you checked is there a maintenance window set? - No
Also can they find the content on a DP? Yes
Are the files present on the client in ccmcache? Yes

WSUS Issues in SCCM 2012 environment

Hi Folks
I have a WSUS server running in a secure environment. Because i have no access to the internet from this server i use an upstream server for my update source. We have used another WSUS server as our upstream box for a while without issue but our company
has now gone to SCCM 2012 and i so i am now using this as my update source. This works well with synchronisations working without issue.
My problem is that within the wsus console the computers are showing with updates available but when i go to the computer and run windows update it states no updates are available. also looking in the windowsUpdate logs it states 0 updates found!!
I thought this was because i was using a w2008R2 wsus server so i have built another wsus server based on w2012r2 and this has exactly the same results. if i point the server back to use my other wsus server as an upstream server it all works and updates
are available on the computers.
Has anybody else had this issue and more importantly is there a fix? i dont want to use sccm for updates direct so i need to get this working.
my computers looking for updates are all w2008r2. my wsus server is w2008r2 and i also have a w2012r2 wsus server for testing. the sccm 2012 server is based on w2012r2 box all are x64
thanks

Hi,
>>My problem is that within the wsus console the computers are showing with updates available but when i go to the computer and run windows update it states no updates are available.
Please make sure that the Update is approved for the specific group and the client are in the correct group.
Beside, please check if the update file has been downloaded on the WSUS server. The update will be available until it has been downloaded.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

App v package distribution issue to sccm 2012 DP

Hi,
We are migrating app-v 4.6 packages to sccm 2012 , after importing the packages when we update DP its not copying the dependent scripts inside the appv package to Dp and hence when application launches it fails to launch the vb script.
the script is made to run when shortcut is launched, but no vb script is copied to DP , but I have all files intact in source folder iyt just copies .sprj,xml,osd.
Please suggest how to make all the files in package abcd.001 to get copied in DP.
Does App-v package distribution is different from normal package.
Thanks
Shuaib

Open up the app in the sequencer, add the file to your scripts folder. If the script requires to be run elevated, you'll want to use the Deployment config file and use Global publishing....
If you don't need elevation you can use the User Config and won't need to publish globally.
Fore more info and some examples, check this out:
http://blogs.technet.com/b/appv/archive/2012/12/10/scripting-and-embedded-scripting-for-appv-5-0-dynamic-deployment-and-user-configuration-scripting.aspx
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

Thin Client reporting issues since SCCM 2012 R2 CU3 upgrade.

Please forgive me, I'm a SCCM newbie. I'm having an issue with my Thin Clients reporting back to SCCM since I upgraded to 2012 R2 CU3.
The only pertinent thing I find in any log is "RegTask: Failed to get registration state. Error: 0x8009000b" "GetRegistrationState failed (0x8009000b)" in the ClientIDManagerStartup.log
If anybody has any tips, I would be more than appreciative.

I have not run into this before, but have you validated that your management point is healthy?
This thread has a couple things to try as well:
https://social.technet.microsoft.com/Forums/en-US/0d2e369d-cd93-4145-8db3-e9943c99a4ae/client-property-set-to-no-application-deployment-not-working-issue-with-registering-to-mp?forum=configmanagergeneral
Jeff

Trouble shooting BOOT issue in SCCM 2012 but I cant find SMSPXE.log in the logfolder

Hi,
Is there an change in PXE troubleshooting PXE PE boot issue, in 2012?
I cant find wat I am used to...
/SaiTech

Hi,
One of our PXE point get some issue, I could not set my finger on it.
I could not find any log file and I expect an smspxe.log in D:\Program Files\SMS_CCM\Logs (Primary site server) so I think something is wrong. The PXE worked after I put .Net 4 on the server.
Is it a secret what you're missing? How should we help you if you don't tell the exact problem?
No secret but I am not sure by my self what state the DP server have.
/SaiTech

Issue with SCCM 2012 SP1 U5 upgrade and client published version

Recently we upgraded our SCCM server to SP1 U5, and our published and available client version is still at 5.00.7804.1000 instead of 5.00.7804.1600. We ran the hotfix to upgrade it and it looked like everything had went through. Does this not also
upgrade the client? It doesn't seem like you can run the hotfix again after you've already installed it once to repair either. Is there another way to update the published version inside the console? We have it as a package right now to deploy to all the systems
but I was hoping we could upgrade the internal one and let it run more automatically. Any advice would be greatly appreciated.

More info:
How to update ConfigMgr clients automatically… in SP1
http://configmgrblog.com/2012/12/03/how-to-update-configmgr-clients-automatically-in-sp1/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Mac Enrollment Issue on SCCM 2012 SP1

Hi Guys,
I am working on Mac enrollment(10.7) and facing issue during enrollment. Below is the error message when we try to run the enrollment command on Mac :
“Server connection failed. HTTP Response code is 500 and reason is Internal Server Error"
Below are Log info:
Enrollsrv.log : No error message is highlighted.
Enrollweb.log:
No error message is highlighted.
Enrollservice.log:
[7, PID:7304][10/28/2013 16:40:03] :ConfigManager: ChainStatus error: RevocationStatusUnknown,The revocation function was unable to check revocation for the certificate.
;OfflineRevocation,The revocation function was unable to check revocation because the revocation server was offline.
   at Microsoft.ConfigurationManagement.Enrollment.ConfigManager.SplitCACertChain(String base64cert)
   at Microsoft.ConfigurationManagement.Enrollment.ConfigManager.setCAChain(EnrollmentServiceProfile profile, WindowsIdentity requester)
   at Microsoft.ConfigurationManagement.Enrollment.ConfigManager.RefreshCache(Int32 enrollmentProfileId, EnrollmentRecordType type, String template, WindowsIdentity requester)
   at Microsoft.ConfigurationManagement.Enrollment.RequestHandler.ProcessRequestSecurityToken(RequestSecurityTokenType request, WindowsIdentity caller, ActionEnum action)
   at Microsoft.ConfigurationManagement.Enrollment.RequestHandler.EnrollDevice(Message messageRequest)
   at Microsoft.ConfigurationManagement.Enrollment.DeviceEnrollmentService.RequestSecurityToken(Message messageRequest)
[7, PID:7304][10/28/2013 16:40:03] :FaultCode is: EnrollmentServer and reason is: EnrollmentServerException InitializeFailed
[13, PID:7304][10/28/2013 17:11:01] :EnrollmentService application stop ...
[3, PID:956][10/28/2013 17:45:37] :EnrollmentService application start ...
[3, PID:956][10/28/2013 18:06:38] :EnrollmentService application stop ...
[3, PID:4700][10/28/2013 18:45:39] :EnrollmentService application start ...
[7, PID:4700][10/28/2013 19:06:40] :EnrollmentService application stop ...
[3, PID:5872][10/28/2013 19:45:42] :EnrollmentService application start ...
[13, PID:5872][10/28/2013 20:06:42] :EnrollmentService application stop ...
Can someone shed info on resolution of the above issue?
Also, is there any means by which we can troubleshoot the Mac enrollment issue step by step? Also what entries needs to be checked in all logs for successful enrollment?

the following links may give you some hints:
http://social.technet.microsoft.com/Forums/en-US/48bc7fcc-3d84-4042-abac-67f30d701121/mac-enrollment-issue?forum=configmanagerdeployment
http://www.windows-noob.com/forums/index.php?/topic/7391-mac-enrollment-issue/

Enforcement State Unknown issue in SCCM 2012 Patch management report.

Software updates are installed on machine. All updates shown in updates history, but machine not reporting back as Complaint. It showing in Enforcement State Unknown. Please help to resolve the issue.

Hi,
Have you tried to "Run Summarization" while right click the software update group?
If it still shows unknown, please check StateMessage.log on a client that updates show unknown to see whether the state messages have been forwarded successfully.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

System Discovery Issues in SCCM 2012

SCCM is not discovering all resources from AD OU. What could be the reason for this. This is not happening for all OU's but randomly for some of them.
Is there a method to force the system discovery to run instantly ?

Thanks Jason,
I think my query was mixed up.
2) Will the status be NO client ?, If yes, does that mean the complete
cycle will start again? Meaning as the client is already inactive, it will not send any more hearbeat and configmgr will again wait for the specified days before deleting it again ?
I know the difference between AD and Heartbeat discovery. I am trying to get a clear difference between
delete Inactive discovery data and delete
aged discovery data.
I checked a blog, I think this is from you http://www.myitforum.com/forums/Delete-aged-discovery-data-and-delete-inactive-client-discovery-data-m204924.aspx
, where it says "For the Delete Inactive Client Discovery
Data task, if you haven't cleaned up AD, the object will get recreated (without the client installed flag). If you auto client push enabled, ConfigMgr will try to push to the system again"
What I get from here is, client status will be NO when it is rediscovered from AD.
Now if the machine was already deleted with Delete Inactive discovery data maintenance task, and its rediscovered, the client will again become Inactive as the machine is
not in use. Will the Inactive discovery maintenance task wait again for defined days before it deletes this machine from the database.

SCCM 2012 R2 DP - Reserve Disk Space issue

Hi Team,
Issue with SCCM 2012 DP. Reserve Disk space issue.
During DP installation I have given 100000 MB as Reserve disk space, now my DP Share drive reached below 97 GB of free space, now I’m unable to distribute packages to the DP.
Below is the error Message in Smsdpprov.log
Failed to find space for 105874160 bytes.
Solution tried:
Tried changing the reserve disk space value in Registry (HKLM- Software – Microsoft – SMS- DP- ReservedDiskSpace),
But the value is getting auto reset to old value after a restart.
Is there any way where I could change the Reserve disk space without reinstalling the DP Role?

Hi,
>>Is there any way where I could change the Reserve disk space without reinstalling the DP Role?
We need to edit the reserved free space in SQL database. But this is not supported by Microsoft.
Steps:
1) Run SQL query:
select SCR.ID, SCR.Name,SC.NalPath, SCR.Value3 from sc_sysresuse_property SCR join sc_sysresuse SC on SCR.SysResUseID = SC.ID where SCR.name = 'MinFreeSpace' and SC.NALPath like '%<DP_Name>%' and SC.RoleTypeID = 3
Note: you need to replace the <DP_Name> with your actual remote DP server name.
2) Use the returned ID in step 1). Run the below query to update the 'MinFreeSpace' value.
update sc_sysresuse_property set value3 = 'set desired value in MB' where name = 'MinFreeSpace' and ID = 'ID retained in previous select query'
Example:
update sc_sysresuse_property set value3 =20480 where name = 'MinFreeSpace' and ID = 75340198761234567
3) In the next package content update cycle, the reserveddiskspace registry value (under HKLM\software\Microsoft\SMS\DP) will be changed
to 20480.
Or you can restart the SMS_SITE_Component_Manager service on SCCM site server
to update the “reserved free space” value on remote DP.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..

Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help..

SCCM 2012 - Primary Hardware Failure

Hi,
I got a hardware issue on SCCM 2012 SP1 primary site server - A and i need to move the primary site server to another machine
B. I have renamed the new machine B as primary site server name and also i got a pure backup in place. Below are some clarity needed
1. Do i need to do any changes in AD like removing the old SCCM primary site server A and again add B server in system management container? Is there any changes i should do in AD?
2. Once after recovering B server does all the secondary and DP will report to new B server? or do i need to any changes?
3. I have provided local admin access on all the site servers for A server? Do i need to re-add B server once again?
Probably in 1 week time A server hardware issue will be fixed. Can i shutdown B and turn On A. Do i need to do the same as above?
Regards, Pratap

#1: no changes needed
#2: everything should work again after the restore
#3: ConfigMgr should take care of it. You would see errors in sender.log of a secondary site if it is no longer able to communicate with its parent primary.
Torsten Meringer | http://www.mssccmfaq.de

Not liking Deployment Status Monitoring in SCCM 2012 - Not enough detail

I know SCCM 2012 has made some fantastic changes to offering tools for deploying packages. I am using and learning a lot about deploying apps using the new features of SCCM 2012 Application Management. I still have a few apps that I need to deploy
the old way using Packages. With the old way, I liked using task sequences and conditions with WMI Queries. One item I found out quickly is that I am having issues with SCCM 2012 recognizing some name spaces such as root\cimv2\sms. I am still
researching why. The other item is reporting of advertisements or what SCCM 2012 now calls Deployments. I am unable to find a way to get more detailed reporting on deployments that I had with SCCM 2007 using the right click tools and advertisement
reports. The details of these reports in SCCM 2007 was really good and I was able to troubleshoot each step of a task sequence. All I can find with SCCM 2012 is a simple description that says the "Program completed with success" or the program
failed. Is there a way to easily get more detailed reports much like I had with SCCM 2007? I know I am missing something really simple. Any insight would be much appreciated.
Thanks
BJ

It's an old thread and all, but I'd like to add to the last post.
Pellewall has 400 application type deployments - I feel bad for him. We've converted almost all of ours into packages, because application deployment doesn't Work as reliably as packages. We can't get applications to install in task sequences, and sometimes
simple installs fail for wierd reasons when deployed as application, but perform fine using the same install string as a package launched thru cmd (both as system user).
We've been using sccm 2012 for 1½ years now roughly, and I'd discourage anyone from making application type programs if they don't want a headache.
As for reporting - the builtin reports need to be modified to become useful, but they're a nice extra to have. I find the old reporting system in 2007 was much simpler and faster than srs though, but that might just be my opinion.
As times change, so do people.

OSDCOMputer name issue - MDT2013+SCCM 2012

Similar Messages

Maybe you are looking for