OSM - Central Order Managment - Service Order Managment

Hi!
I'm studing OSM. Now, I have a problem. How the request Order passes from COM (Central Order Managment) to the SOM (Service Order Managment) ?
Thanks

Hi !
I'm studing OSM too, I have been reading documentation and I Understand that COM and SOM are booth in a Single Orchestration process that can be designed in
"Design Studio" as a plug in of the Eclipse Plataform, when you talk about "how the request Order passes from COM to SOM" I asume that you understand the
process to get the income message that comes from a external system as a file .XSD and then the Orchestration process have to convert that file in a XML that understand the OSM, then the OSM have to map each products or items or services into a fulfillment plan that specifies how to fulfill that products or services or orders, and all of this components are entities that you have to define in the Orchestration process and that entities or components are in the Environmet of the Design Studio, some of this components are: "Orchestation Sequence" , "Order Item Specification", "Product Class", "Fulfillment Mode" , "Orchestration Stages" , "Order Recognition Rules", "Process", "Descomposition Rules" , "Automated or manual Tasks", "Data Dictionary".
For more information about Concepts read "Order and Service Management 7.0.2 Documentation" in this documentation you can find the next topics:
Communications Order and Service Management Concepts:
3 Order Request Processing
About Receiving Orders
Understanding Order Input and Request Processing
Understanding Order Recognition
Defining Recognition Rules in Design Studio
Recognition Rule Errors
Understanding Order Validation
Understanding Order Transformation
Understanding Order Creation
4 Orchestration Orders
Understanding Orchestration Plans
Understanding Orchestration Models
Understanding Decomposition Rules
Understanding Fulfillment Modes
Understanding Orchestration Stages, Sequences, and Processes
Modeling Orchestration Stages in Design Studio
Modeling Orchestration Sequences in Design Studio
Viewing Decomposition and Dependencies Graphically
About Creating a Cartridge for Orchestration Orders
Understanding Order Items and Order Components
Understanding Order Component Control Data
About Modeling Order Items in Design Studio
About Modeling Order Components in Design Studio
Understanding Dependencies
About Compensating Dependencies in Orchestration Plans
About Modeling Dependencies in Design Studio
Understanding Product Specifications
About Importing Product Classes in Design Studio
About Creating Product Specifications in Design Studio
About Defining Order Components in Product Specifications
You can fin this documentation at: https://edelivery.oracle.com
Regards.
Lucas.

Similar Messages

SRM 7.0 / ERP 6.04: Config. of Central Contract Management

Hello,
I want to configure the newly introduced integrated Procure-to-Pay Scenario Central Contract Management.
I found SAP Note number 1268821 where all tasks are described in order to implement the previous scenario.
For correct implementation, business function "Purchasing - SAP SRM Integration" (LOG_MM_P2PSE_1) activation is required in the ERP Systems.
When I run SFW5 t-code in order to activate the previous business function, SAP system gives an alert message.
What are the consequences of this business function activation ??
Thank you
Michele

Hi Michele,
I don't think there will be any consequences, we had certain warning messages aswell when we activated the business functions in ECC 6. Reading the warning messages we could conclude it wasn't any serious problem.
Details on functionalities included in a business function can be viewed here: [http://help.sap.com/erp2005_ehp_04_sp/helpdata/en/42/fbded750e61febe10000000a422035/frameset.htm] -> Business Functions (SAP Enhancement Package 4 for SAP ERP 6.0) -> Business Functions in SAP ERP -> Logistics -> Materials Management -> Procurement - SRM Integration
Kind regards,
Tim

Central Contract Management in case of Classic Scenario

Hi,
At our current implementation, requirement is to implement both Service procurement(with hierarchy) and Central Conract Management. I was exploring the possibility of utilizing Central Contract Management with Classic scenario.
Will the Central Contracts created in this fashion be available in Sourcing Cockpit for the buyer to select against Purchase Requisitions? Will the Central Contract be visible at all in SRM in this case ?
Please respond only with reference to Classic scenario.
Thanks,
Abhilash

Yes the Central Contract will be available in the Sourcing Cockpit, both local and classic scenario's. Yes the Central Contracts will be available for the creation of Purchase Requisitions in R/3 and to assign SOS in R/3.
Do know that for SRM 7.0 PI is required for setting up Central Contracts. This is promised to change with the release of EHP1 for SRM (due june 2010).
Kind regards,
Tim

Setup Central Contract Management SRM 7.01 with differing release versions

Hello experts,
OSS note 1268821 explains how to configure the central contract management between a SRM 7.0 and an ERP 6.04. So far so good, but how should it be handled if there are differing release versions such as ERP 6.04 and ERP 6.03? I guess that a technical split (xml services/ ALE distribution) is necessary?
Assuming that there are some backends with differing release versions and in some cases with differing master data (not supported by central master data client) would you always go via PI? Independent of release version, technology and master data.
Could you give some further detailed informations how to configure such a scenario? What has to be done to transfer existing contracts from an ERP 6.04 into SRM CM component (migration concept)?
Thanks!!!
KR Thorsten

Hi Thorsten
The minimal ECC version is 6.0 EHP4, Central Contracts require certain business functions in ECC to be activated and as these are included within ECC EHP4 you won't have these available in lower version. Therefore you won't be able to operate central contracts in such an ECC system.
You would either have to go with patching these systems or go with GOA's for these systems.
Operating central contracts via PI or SOA i believe provide almost similar functionality. SOA however requires an SRM EHP1 system and ECC EHP5 back-end to operate whilst central contracts configured via PI can be operated onwards from an SRM 7.0 and EHP4 system.
I can't help you on your migration issue, maybe someone else can.
Kind regards,
Tim

Central Contract Management

Dear SAP Experts,
I have a few questions regarding our implementation of SRM and ECC.
FYI, we are planning to use SRM 7.01 and ECC 6.05 as backend.
We’re planning to utilize Central Contract Management functionality in SRM, where we negotiate the price in SRM then we distribute the contract to ECC. In ECC we create PR, which have reference to this contract (contract number in SRM is different with ECC). So this PR will have assigned source of supply, is it possible for us then to create PO automatically from tcode ME59? The reason we ask this because we see in documentation that every PO in ECC created with reference to contact in SRM, ECC will need to check first the current price in the SRM contract, so we would like to confirm whether it is working if we use ME59 (we plan to use ME59 as background job and unfortunately we don’t have the testing system yet to verify this).
We’re planning to have PR created in ECC. However we would like to utilize MDM catalog as well. Is it possible that during PR creation we can select items from the catalog?
We’re planning to have implement SRM 7.01 in 2 waves. In first wave we will only use Self Service Procurement and Strategic Sourcing (using classic deployment where the leading PO is in ECC). However in the second wave, we’re planning to implement SUS (Supplier Collaboration). In SUS, we would like to activate the business function, so the vendor will response RFx and participate in auction from SUS itself. The question is…is it possible for us to have it planned like this? For example, in first wave, the RFx and auction will use SRM server itself, however in the second wave, we will switch it to SUS. Our concern is that the switch will happen to the productive server already. Is this okay?
Thanks
Varian

Hi,
When you distribute the central contract to ECC system, it creates a new contract in ECC system.
When you create PR, you can assign this contract as source of supply.
Then automatic PO creation if your settings for automatic PO is maintained.
In ECC 6.04 also catalog integration is possible. So for your version 6.05 there is absolutely no problem. The same OCI interface parameters have to be maintained in MM system for catalog.
Your two stage implementation is absolutely possible.
With Regards,
Malay

ERP release for Central Contract Management with SRM 7.0 EhP 1

Hi all,
i would like to have clarification with ERP and SRM release combinations regarding SRM 7.0 EhP1.
Indeed, the "Software Component Matrix for SAP SRM 7.0 EHP1", for Operational Contract Management, tells 'EHP 5 for SAP ERP 6.0 required'.
Moreover, in RKT dealing with SRM EhP1 delta overview, ERP 6.0 with EhP5 is mandatory for an upgrade to SRM7.01.
Nevertheless, i would like to have confirmation regarding this point.
We do not want to use PI to execute the Enterprise Services for CCM. So, we intend to switch BF SRM_WSRM_1 on.
But on the ERP side (EhP5), the only BF dealing with Contract Management is LOG_MM_P2PSE_2 which description is about Service Procurement (and more exactly for item hierarchies).
Does it mean we can use SRM 7.01 with ERP 6.0 EhP4 and without PI but only if we do not use Central Contracts with service hierarchies ?
Thank you for your help.
Regards.
Laurent.

Hi Laurent,
Yes.
When Central contract was designed in SRM 7.0 with ERP EhP4, it was designed with no service hierarchy. But in SRM 7.01 Central contral was enhanced to handle service hierarchy and it works with ERP EhP5. The problem is when we have SRM 7.01 and ERP EhP4. To handle this complication SRM 7.01 was designed to send flat service lines to EhP4 and lower release even though Central contract in SRM has service hierarchy. So while transfering to ERP EhP4 system in standard, all outlines are not consider for transfer and only service lines (Functional items) are transferred to ERP. To do so user needs to maintain the backend destination information of the connected backend system in table BBP_BACKEND_DEST via SM30 transaction with correct system type (for EhP4 system it will be ERP_4.0 and for EhP5 ERP_5.0). SAP Standard program checks this while XML generation for transfer and if system type is ERP_4.0 system it removes all outlines from temp table before generating the XML data. When it is done, ERP has only service lines in its XML and it does the manupulation to create the replication of central contract.
Master Guide (Including Upgrade Information) - SAP SRM 7.01 states:
"The use of SAP NetWeaver PI is optional but it is required for outbound XML-based messaging or for connecting non-SAP planning or execution systems."
So service hierarchy is possible in SRM 7.01 and ECC 6.04 but only with PI. For other CCM functionalities, SRM 7.01 and ECC 6.04 without PI works fine.
Best regards,
Christian Zeuch

Central transport management system

Hi All,
How do i configure central transport management system within Solution Manager to find out if transports within different environments can be controlled from single system.
Regards
Suresh

Hi:
You first need to have every SAP system already configured into Solution Manager in a Solution Landscape whereas, to configure the central TMS to handle all the T.O you need to configure the Change Management feature in Solution Manager.
Additional information and also the installation and configuration guides are located under http://service.sap.com/solutionmanager
Hope this helps!
Best Regards,
Federico G. Babelis
http://www.gazum.com

In Central Configuration manager only few contents are coming

Hello,
I have installed BO XI 3.1.
I have installed freshly & i am facing some problems in Central configuration manager .
In Central Configuration manager only few contents like :
Apche Tomcat 5.5.2.0
OracleOraHome92HTTPServer
WinHTTP Web Proxy Auto-Detective Service
World Wide Web Publishing Service
are coming rest all are not coming , can anyone help me to resolve this issue.
Thanks
Priyanka

Hello Priyanka,
I think you are looking for the server list.
With BOE R3 and the introduction of the SIA the servers are managed be the SIA.
If you need to see the serverlist go to the CMC or clicl in enable/disable server.
I recommend to post further queries to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Central Configuration manager only few contents are coming

Hello,
I have installed BO XI 3.1.
I have installed freshly & i am facing some problems in Central configuration manager .
In Central Configuration manager only few contents like :
Apche Tomcat 5.5.2.0
OracleOraHome92HTTPServer
WinHTTP Web Proxy Auto-Detective Service
World Wide Web Publishing Service
are coming rest all are not coming , can anyone help me to resolve this issue.
Thanks
Priyanka

Hello Priyanka,
I think you are looking for the server list.
With BOE R3 and the introduction of the SIA the servers are managed be the SIA.
If you need to see the serverlist go to the CMC or clicl in enable/disable server.
I recommend to post further queries to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

PRAA in combination with central address management

Hello,
In our system we have central adress management activated. All the
personell nrs are entered with the correct address (sreetname and
housenumber in 2 separate fields). We use this information to create
the corresponding vendor numbers in FI (transaction PRAA).
However, with transaction PRAA both the address (streetname and
housenumber) are copied into one field (streetname). As a consequence,
the corresponding batch input session, which is using program SAPMF02K,
cannot automatically (in bcakground) create all the vendors, since we
always get a message about central address management. (Streetname does
not exist, because it wrongly contains both the streetname as well as
the housnumber.)
The field USE_ZAV which is automatically ENTERED in the background
processing of the SAPMF02K batch job, is causing this address check.
We think this is a bug.
Ideally the PRAA should be entering the streetname and housnumber in 2
separate fields in FI-vendor master data, of the automatic check of
field USE_ZAV should not be entered in this batch input background
processing.
Can you please give us some advice on how to deal with this situation?
Kind regards
Karinne Van Goethem
SAP Consultant - Holland Casino

XXX

Error-IM258-This refers to an error in central status management.

Dear All
We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
But while executing IP10 system throws an error message as follows
Error Msg no: IM 258- Object does not exist (Status Management)
This refers to an error in central status management.
Kindly help on the above issue
Regards
Thyagarajan
Edited by: thyagarajan krishnamurthy on Feb 18, 2011 11:10 AM
Edited by: thyagarajan krishnamurthy on Feb 18, 2011 2:28 PM

Dear,
Please refer the OSS Note 437878 - Status data missing for PM/CS notifications .
Regards,
R.Brahmankar

Using central Solution Manager for monitoring multiple customers

Hello,
We are working on monitoring SAP systems of several customers. For every customer we have configured central monitoring on Solution Manager system of that customer. All satellite systems are added to RZ21 and CCMS agents are configured correctly. On the Solution Manager, in RZ20 we have created a rule based monitor specific to the needs of customer, and that monitor is used for the whole landscape of every customer.
But now I need to configure our central Solution Manager system which will collect CCMS data from all satellite systems of all customers on one place in RZ20. That central Solution Manager system should have direct connection only to customer Solution Manager systems and not to their satellite systems. Is this possible? If yes, can you please explain me how to do it or point me to documentation? I was unable to find solution.
To make this more clear I made a picture of desired configuration:
https://picasaweb.google.com/108686894540363563900/SAP#slideshow/5571983242527848482
Edited by: Dejan Terzic on Feb 10, 2011 10:04 AM

Hi Dejan,
as far as I know this is not possible.
we had similar issues, every time we migrated a new customer to or datacenter. Our solution was, to register the CCMS agents to two systems for a period of migration.
Sometime ago, I found a question for that an SDN:
Using another CEN for Solution Manager
I know, that this is not your question exactly, but it is the right direction...
Kind regards

Multi-Site WAN With Centralized Call Manager

The customer has HQ with 15 Branches. Head quarter has about 4300 Phones, and Branches has:
Branch 1 = 420
Branch 2 = 256
Branch 3 = 385
Brnach 4 = 298
Branch 5 = 262
Branch 6 = 171
Branch 7 = 200
Branch 8 = 97
Branch 9 = 198
Branch 10 = 254
Branch 11 = 269
Branch 12 = 224
Branch 13 = 90
I would still like to propose Centralized Call Manager Cluster with SRST, but little confused since the number of phones per branch is very high.
What would be best deployment model for this type of scenerio along with VoiceMail and CER.

Of course you can use CME/CUE, but the problem is that you need 3845 for SRST with CME/CUE, which cost a lot of money CISCO3845-CCME/K9 is $16495 plus CUE ($3000, not include voice mail subscriber box).
So I will agree what people suggest here.
I have centralized design (Publisher, subscriber) at Main Location, and another subscriber at remote site coz 500 users. I chose put subscriber there rather than use 3845 with SRST.
They share voice box at Main site (Unified).
The rest of remote site use SRST for backup.
Large remote site with T1 PRI with SRST if WAN down.
Small remote site with vic2-2fxo/4fxo with SRST if WAN down.
You can read the SRND here:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a00806e8a79.html
Also, you can design multiple cluster depends the location of main and branches. For example, half office located at West Coast, another half at East Coast. If I were you, I will create two clusters.
Again, it depends a lot of things, for example bandwidth, round-trip delay etc...
Hopefully, thats can help you.
Ken

CRM - IS-M Central Address Management

Hi Guys,
Can we integrate CRM (7.0) with IS-M Central Address Management.
In IS-M trx. BP when creating a Business Partner address system validates against Central Address if this address exists and fill, for instance Postal Code.
CRM can download standard ERP Regional Structure (Address Management), but I'm not sure if and what type of integration we can have with Media Central Address Management.
Any inputs are welcomed.
Best regards,
Renato Petrulis

Close since no answer for so long.

Error by opening the Central configuration manager

Hi Gurus,
i have a problem with my system.
I installed Enteprise XI 3.0, Crystal, CR, Xcelsius.
By trying to install Live office i receive an error.
I open the Central configuration manager and received this:" The procedure entry pint? Can stack Dump@SLogger@CXLib400@SA_NXZ could not be located in the dynamic link library CXLIBW-4-0.dll"
I can´t start nor stop in CCM.
Do you have any solution?
Thank you for your input.
Pat

Hello Gilo,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

OSM - Central Order Managment - Service Order Managment

Similar Messages

Maybe you are looking for