OSMF not working for local .f4v on linux

hey frnds,
OSMF not working for local .f4v on linux system.
It shows playback error.
Is it bug of osmf ?
Why it can not play local video(.f4v) on linux
thx in advanced,

hey frnds,
i'm running this app from adobe air on linux.

Similar Messages

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

Mail not working for local users

I have sunOS 5.9 running on sun sparc
mail is not working on this system even for local users.
I have tried from the command prompt
mail username
Test email
^D
nothing happens after control D, I don't get command prompt.
I also tried
mail username
Test email
nothing happens
sendmail daemon is not running on this system but my understanding is that sendmail is not required. I need mail to work only for local users to receive emails for failed cron jobs etc, it is not required for this system to send or receive emails to/from outside world.
Can someone guide or point in right direction to fix mail functionlality for local users?

Actually, with recent versions of sendmail, you do need sendmail running to be able to send mail.
You never used to, but since they made sendmail no longer setuid root, you do.
Sendmail has essentially been split into 2 daemons a local queue runner with handles sending sent by local users.
And a listener daemon with listens for remote connections.
If you want to be able to send mails but not have sendmail listening, you have a couple of options.
You can either run only the local queue runner and not run the listener. In this case you have to configure the local queue runner to send mails onto a external mail host for processing. This requires editing /etc/mail/submit.cf
Alternately, you need to configure the local listener to only bind to the localhost port so it can't be contacted from external sources.
This requires editing sendmail.mc and regenerating a new sendmail.cf
I tend to favour the latter option as the former limits your ability to do things like local aliases of root: [email protected] to send all your root mail to a central account.
This is the sendmail.mc you will need
divert(0)dnl
VERSIONID(`@(#)main.mc 1.5 (Sun) 08/10/00')
OSTYPE(`solaris8')dnl
DOMAIN(`solaris-generic')dnl
DAEMON_OPTIONS(``Port=smtp, Addr=127.0.0.1, Name=MTA'')dnl
FEATURE(`no_default_msa')dnl
MAILER(`local')dnl
MAILER(`smtp')dnl

Applet showDocument not working for local files!!

Hello:
I wrote a signed applet that is generates html files in user temp folder (for my Win 7: C:\Users\ren\AppData\Local\Temp\jTmp\ )
The applet is supposed to display the html files in browser by using showDocument().
I tested it on firefox 25 and IE9 enabling pop-up windows
However, it does nothing. Not even an exception.
The applet fails when running from web (but works in c:\)
For the case, it happens the same with oracle's sample: Displaying Documents in the Browser (The Java&trade; Tutorials &gt; Deployment &gt; Java …
In this applet, if you input a local file (file:///c:/ etc) , it won't open it.
I supposed showDocument was not subject to security restrictions, but seems the new rule is:
-applets running locally will display all pages (web/local)
-applets running from the web will display only web pages.
My applet used to work fine, but in some jre7 upgrade it was broken!!
Is this a bug or a new security issue?
Thanks in advance!

Did you get this resolved..
I am using Internet Explorer v. 5.2 on Mac OS X v.10.2.8. I have successfully run an applet, using jre 1.3.1 which implements the "showDocument" method and opens a new page.
Could you post your code..

SAP Mobile app Stock photo not work for network location

Hi Experts
I found if we use network location path (e.g.
servername\pic folder\) in SAP Business One General Settings -> Path, Picture Folder, then if we logon SAP B1 Mobile app from iPad/iPhone, and try to open stock photo, we will get error:
Processing Failed
Internal server error: contact your system administrator
It looks like it only work for local path, e.g C:\pic
Even we put path as :
local pc name\pic folder, it is also not work.
Any idea about this?
Thanks
Tim

The first link is a temporary fix for a machine that only one or two people will use. This will not fix the Library Machines that some 3000 users can use at anytime. I can not pre-add all these users every time we image a machine. We also loan out laptops and I need these machine to wirelessly login dynamically to the domain. But I also need these machine to allow access if these machine are removed from our campus and the wireless access is not available.
Thank again for the help and I hope someone at Apple can fix this soon. I going to have a hard time telling the client that thay can not use the OS that came with they're machine.

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

Drill down is not working for Pivot tables,but working for chart

I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
Please help me with the below issue.

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (windows)

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (win64), where can I get a module that works?
I get this error from Apache :
C:\www\Apache2.4\bin>httpd -t
httpd: Syntax error on line 741 of C:/www/Apache2.4/conf/httpd.conf: Syntax error on line 2 of C:/www/Apache2.4/conf/mod_jk.conf: Cannot load C:\\ColdFusion10\\config\\wsconfig\\1\\mod_jk.so into server: The specified procedure could not be found.
I have already tried manually extracting the pre-built mod_jk22.so from the wsconfig.jar with same results.
If I switch to Apache 2.2.22 64bit, it does work. what I need is to be able to run on Apache 2.4.

Please check out this link.
http://rob.brooks-bilson.com/index.cfm/2012/2/21/Installing-ColdFusion-10-with-Apache-on-W indows
In this link, they are configuring with Apache 2.2 only.
When we were working colfusion 9 with Linux and apache, we had the same problem, it will work when it connect to Apache 2.0 but not with Apache 2.2 version.

Photoshop extension building not working for cs6, works for the rest

I am building an extension for photoshop the manifest file is as below:
<?xml version="1.0" encoding="UTF-8"?>
<ExtensionManifest Version="4.0" ExtensionBundleId="Kit" ExtensionBundleVersion="2.0.0"
ExtensionBundleName="Kit" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ExtensionList>
<Extension Id="Kit.extension1" Version="2.0.0" />
</ExtensionList>
<ExecutionEnvironment>
<HostList>
<Host Name="PHSP" Version="[13.0,15.9]" />
<Host Name="PHXS" Version="[13.0,15.9]" />
</HostList>
<LocaleList>
<Locale Code="All" />
</LocaleList>
<RequiredRuntimeList>
<RequiredRuntime Name="CSXS" Version="3.0" />
</RequiredRuntimeList>
</ExecutionEnvironment>
<DispatchInfoList>
<Extension Id="Kit.extension1">
<DispatchInfo >
<Resources>
<MainPath>./index.html</MainPath>
<ScriptPath>./Kit.jsx</ScriptPath>
</Resources>
<Lifecycle>
<AutoVisible>true</AutoVisible>
</Lifecycle>
<UI>
<Type>Panel</Type>
<Menu>Beauty Retouching Kit</Menu>
<Geometry>
<Size>
<Height>580</Height>
<Width>250</Width>
</Size>
<MaxSize>
<Height>580</Height>
<Width>250</Width>
</MaxSize>
<MinSize>
<Height>580</Height>
<Width>250</Width>
</MinSize>
</Geometry>
<Icons>
<Icon Type="Normal">./pictures/thumb/Icon.png</Icon>
<Icon Type="RollOver">./pictures/thumb/Icon.png</Icon>
<Icon Type="DarkNormal">./pictures/thumb/Icon.png</Icon>
<Icon Type="DarkRollOver">./pictures/thumb/Icon.png</Icon>
</Icons>
</UI>
</DispatchInfo>
</Extension>
</DispatchInfoList>
</ExtensionManifest>
I tried this code for photoshop CC and CC 2014, it works for both but I couldn't get it to run for cs6 it gives the below error from the extension manager:
so isn't Version="[13.0,15.9]" correct? why would it not work for cs6? thanks in advance.

Hi,
CS6 doesn't support HTML Panels but Flash ones, this should be the why the Adobe Extension Manager fails.
You might find help here (Flash): Creative Suite Extension Builder and here (HTML): Extension Builder 3
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

BAPI_GOODSMVT_CREATE is not working for movement type 701 in MIGO

Hi gurus
Can anybody help to track that bapi: BAPI_GOODSMVT_CREATE is not working for movement type 701 for MIGO Transaction.

call this standard BAPI, AND EXECUTE IN SE37
""Local Interface:
*" IMPORTING
*"     VALUE(GOODSMVT_HEADER) LIKE BAPI2017_GM_HEAD_01 STRUCTURE
*"        BAPI2017_GM_HEAD_01
*"     VALUE(GOODSMVT_CODE) LIKE BAPI2017_GM_CODE STRUCTURE
*"        BAPI2017_GM_CODE
*"     VALUE(TESTRUN) LIKE BAPI2017_GM_GEN-TESTRUN DEFAULT SPACE
*"     VALUE(GOODSMVT_REF_EWM) LIKE /SPE/BAPI2017_GM_REF_EWM STRUCTURE
*"        /SPE/BAPI2017_GM_REF_EWM OPTIONAL
*" EXPORTING
*"     VALUE(GOODSMVT_HEADRET) LIKE BAPI2017_GM_HEAD_RET STRUCTURE
*"        BAPI2017_GM_HEAD_RET
*"     VALUE(MATERIALDOCUMENT) TYPE BAPI2017_GM_HEAD_RET-MAT_DOC
*"     VALUE(MATDOCUMENTYEAR) TYPE BAPI2017_GM_HEAD_RET-DOC_YEAR
*" TABLES
*"      GOODSMVT_ITEM STRUCTURE BAPI2017_GM_ITEM_CREATE
*"      GOODSMVT_SERIALNUMBER STRUCTURE BAPI2017_GM_SERIALNUMBER
*"       OPTIONAL
*"      RETURN STRUCTURE BAPIRET2
*"      GOODSMVT_SERV_PART_DATA STRUCTURE
*"        /SPE/BAPI2017_SERVICEPART_DATA OPTIONAL
*"      EXTENSIONIN STRUCTURE BAPIPAREX OPTIONAL
*"      GOODSMVT_ITEM_CWM STRUCTURE /CWM/BAPI2017_GM_ITEM_CREATE
*"       OPTIONAL
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header         = goodsmvt_header
      goodsmvt_code           = goodsmvt_code
      testrun                 = testrun
      goodsmvt_ref_ewm        = goodsmvt_ref_ewm
    importing
      goodsmvt_headret        = goodsmvt_headret
      materialdocument        = materialdocument
      matdocumentyear         = matdocumentyear
    tables
      goodsmvt_item           = goodsmvt_item
      goodsmvt_serialnumber   = goodsmvt_serialnumber
      return                  = return
      goodsmvt_serv_part_data = goodsmvt_serv_part_data
      extensionin             = extensionin.
commit work.
hi, rewards point, if this is useful,
regrds
karthikeyan

Requested auto spell check not worked for months - gmail uses Firefox's

Tools Advanced setting is on auto spell check but has not worked for months - yes it had worked, probably for years. Looking at gmail for an auto spell checker I see that it leaves that to one's browser - Firefox.

Your More system details list doesn't show the en-GB dictionary.
If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions) and selected.
You can see which dictionary is selected if you right-click in a text area and open the Languages submenu. 
Also make sure that [X]"Check Spelling" in the right-click context menu has a tick. 
You can also try to toggle the "Check Spelling" item off and on again.
See:
* http://kb.mozillazine.org/Spell_checking
* http://kb.mozillazine.org/Dictionaries
You can look here for more dictionaries:
* https://addons.mozilla.org/firefox/language-tools/

Dictionary and selecting words does not work for Japanese documents

iOS 5 includes both English and Japanese dictionaries. However, it seems that dictionary function does not work for Japanese PDF documents, nor can I select any Japanese words in Adobe Reader. Please fix this!
Thanks,
Kenny

You can start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

OSMF not working for local .f4v on linux

Similar Messages

Maybe you are looking for