OSPFv3 issue on a subif associated with a VRF

Question

Hi,
I am trying to virtualize router and physical interface to test daul stack topology. This is one of my test 1841 routers which is failing enable OSPFv3 on a subif associated with a vrf while ospfv2 works fine with IPv4
interface FastEthernet0/1.59
encapsulation dot1Q 59
vrf forwarding TEST
ip address 172.18.58.18 255.255.255.240
ip ospf cost 200
ipv6 address 2001:DB8:BABE:59::2/64
end
Router(config)#int f0/1.59
Router(config-subif)#ipv
Router(config-subif)#ipv6 os
Router(config-subif)#ipv6 ospf 1 ar 0
% OSPFv3: not supported on VRF interface
Router(config-subif)#do sh ver
Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 15.1(4)M2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Mon 26-Sep-11 15:48 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
Router uptime is 9 minutes
System returned to ROM by reload at 04:11:11 UTC Tue Nov 15 2011
System image file is "flash:c1841-adventerprisek9-mz.151-4.M2.bin"
Last reload type: Normal Reload
===XXX====
Any suggestions here???.
Thanks
Ramu

Answer 1

Hi Ramu,
As indicated by the error message, OSPFv3 VRF-Lite is not supported yet. Only BGP and static are available. Please work with your Cisco representative for road-map information.
HTH
Laurent.