Osprey 210?
The Osprey 210 card isn't on Adobe's list of capture cards
that it
recommends to use with FMLE.. it should work though,
shouldn't it?
Here a list of tested cards. http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.0.pdf
As you see on the first line, FMLE is designed to support any capture device that supports Microsoft DirectShow.
Similar Messages
-
We are streaming a live event with two bitrates and the stream keeps stopping. Can anyone shed some light on this problem? I haven't been able to find anything that causes this. Thanks for any help that you can provide. Here is the log file:
Mon Nov 23 2009 10:39:37 : Selected video input device: Osprey-210 Video Device 1
Mon Nov 23 2009 10:39:37 : Selected audio input device: Unbalanced 1 (Osprey-2X0)
Mon Nov 23 2009 10:41:11 : Primary - Connected to FMS/3,0,1,123
Mon Nov 23 2009 10:41:22 : Primary - Stream[AGOrlando1] Status: Success
Mon Nov 23 2009 10:41:22 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Mon Nov 23 2009 10:41:22 : Primary - Stream[AGOrlando2] Status: Success
Mon Nov 23 2009 10:41:23 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Mon Nov 23 2009 10:41:23 : Session Started
Mon Nov 23 2009 10:41:23 : Video Encoding Started
Mon Nov 23 2009 10:41:23 : Audio Encoding Started
Mon Nov 23 2009 10:42:10 : Audio Encoding Stopped
Mon Nov 23 2009 10:42:10 : Video Encoding Stopped
Mon Nov 23 2009 10:42:10 : Session Stopped
Mon Nov 23 2009 10:42:10 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
Mon Nov 23 2009 10:42:11 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
Mon Nov 23 2009 10:46:44 : Primary - Stream[AGOrlando1] Status: Success
Mon Nov 23 2009 10:46:44 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Mon Nov 23 2009 10:46:44 : Primary - Stream[AGOrlando2] Status: Success
Mon Nov 23 2009 10:46:44 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Mon Nov 23 2009 10:46:44 : Session Started
Mon Nov 23 2009 10:46:45 : Video Encoding Started
Mon Nov 23 2009 10:46:45 : Audio Encoding Started
Mon Nov 23 2009 11:08:07 : Primary - Network Status: NetConnection.Connect.Closed status
Mon Nov 23 2009 11:08:17 : Primary - Disconnected
Mon Nov 23 2009 11:08:20 : Primary - Re-establishing connection, attempt 1
Mon Nov 23 2009 11:08:21 : Primary - Reconnected to FMS/3,0,1,123
Mon Nov 23 2009 11:08:21 : Primary - Stream[AGOrlando1] Status: Success
Mon Nov 23 2009 11:08:21 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Mon Nov 23 2009 11:08:21 : Primary - Stream[AGOrlando2] Status: Success
Mon Nov 23 2009 11:08:22 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Mon Nov 23 2009 11:22:45 : Primary - Network Status: NetConnection.Connect.Closed status
Mon Nov 23 2009 11:22:55 : Primary - Disconnected
Mon Nov 23 2009 11:22:55 : Primary - Re-establishing connection, attempt 1
Mon Nov 23 2009 11:22:55 : Primary - Reconnected to FMS/3,0,1,123
Mon Nov 23 2009 11:22:56 : Primary - Stream[AGOrlando1] Status: Success
Mon Nov 23 2009 11:22:56 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Mon Nov 23 2009 11:22:56 : Primary - Stream[AGOrlando2] Status: Success
Mon Nov 23 2009 11:22:56 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Mon Nov 23 2009 11:26:49 : Audio Encoding Stopped
Mon Nov 23 2009 11:26:49 : Video Encoding Stopped
Mon Nov 23 2009 11:26:49 : Session Stopped
Mon Nov 23 2009 11:26:49 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
Mon Nov 23 2009 11:26:50 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 09:25:36 : Video size changed.
Tue Nov 24 2009 09:25:45 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 09:25:45 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 09:25:45 : Primary - Stream[AGOrlando2] Status: Success
Tue Nov 24 2009 09:25:45 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Tue Nov 24 2009 09:25:45 : Session Started
Tue Nov 24 2009 09:25:46 : Video Encoding Started
Tue Nov 24 2009 09:25:46 : Audio Encoding Started
Tue Nov 24 2009 09:29:24 : Primary - Network Status: NetConnection.Connect.Closed status
Tue Nov 24 2009 09:29:34 : Primary - Disconnected
Tue Nov 24 2009 09:29:37 : Primary - Re-establishing connection, attempt 1
Tue Nov 24 2009 09:29:38 : Primary - Reconnected to FMS/3,0,1,123
Tue Nov 24 2009 09:29:38 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 09:29:38 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 09:29:38 : Primary - Stream[AGOrlando2] Status: Success
Tue Nov 24 2009 09:29:39 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Tue Nov 24 2009 09:30:08 : Audio Encoding Stopped
Tue Nov 24 2009 09:30:08 : Video Encoding Stopped
Tue Nov 24 2009 09:30:08 : Session Stopped
Tue Nov 24 2009 09:30:08 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 09:30:08 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 09:30:30 : Video size changed.
Tue Nov 24 2009 09:30:36 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 09:30:36 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 09:30:36 : Session Started
Tue Nov 24 2009 09:30:36 : Video Encoding Started
Tue Nov 24 2009 09:30:37 : Audio Encoding Started
Tue Nov 24 2009 09:32:12 : Audio Encoding Stopped
Tue Nov 24 2009 09:32:12 : Video Encoding Stopped
Tue Nov 24 2009 09:32:12 : Session Stopped
Tue Nov 24 2009 09:32:13 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 09:32:42 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 09:32:42 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 09:32:42 : Primary - Stream[AGOrlando2] Status: Success
Tue Nov 24 2009 09:32:43 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Tue Nov 24 2009 09:32:43 : Session Started
Tue Nov 24 2009 09:32:43 : Video Encoding Started
Tue Nov 24 2009 09:32:43 : Audio Encoding Started
Tue Nov 24 2009 09:33:30 : Audio Encoding Stopped
Tue Nov 24 2009 09:33:30 : Video Encoding Stopped
Tue Nov 24 2009 09:33:30 : Session Stopped
Tue Nov 24 2009 09:33:30 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 09:33:31 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 09:33:38 : Video size changed.
Tue Nov 24 2009 09:33:48 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 09:33:48 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 09:33:49 : Primary - Stream[AGOrlando2] Status: Success
Tue Nov 24 2009 09:33:49 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Tue Nov 24 2009 09:33:49 : Session Started
Tue Nov 24 2009 09:33:49 : Video Encoding Started
Tue Nov 24 2009 09:33:50 : Audio Encoding Started
Tue Nov 24 2009 10:26:59 : Primary - Network Status: NetConnection.Connect.Closed status
Tue Nov 24 2009 10:27:10 : Primary - Disconnected
Tue Nov 24 2009 10:27:11 : Primary - Re-establishing connection, attempt 1
Tue Nov 24 2009 10:27:11 : Primary - Reconnected to FMS/3,0,1,123
Tue Nov 24 2009 10:27:11 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 10:27:12 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:27:12 : Primary - Stream[AGOrlando2] Status: Success
Tue Nov 24 2009 10:27:12 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:28:33 : Audio Encoding Stopped
Tue Nov 24 2009 10:28:33 : Video Encoding Stopped
Tue Nov 24 2009 10:28:33 : Session Stopped
Tue Nov 24 2009 10:28:34 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 10:28:34 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 10:28:42 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 10:28:42 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:28:42 : Primary - Stream[AGOrlando2] Status: Success
Tue Nov 24 2009 10:28:43 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:28:43 : Session Started
Tue Nov 24 2009 10:28:43 : Video Encoding Started
Tue Nov 24 2009 10:28:43 : Audio Encoding Started
Tue Nov 24 2009 10:31:42 : Primary - Network Status: NetConnection.Connect.Closed status
Tue Nov 24 2009 10:31:53 : Primary - Disconnected
Tue Nov 24 2009 10:31:56 : Primary - Re-establishing connection, attempt 1
Tue Nov 24 2009 10:31:56 : Primary - Reconnected to FMS/3,0,1,123
Tue Nov 24 2009 10:31:56 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 10:31:56 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:31:57 : Primary - Stream[AGOrlando2] Status: Success
Tue Nov 24 2009 10:31:57 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:32:54 : Primary - Network Status: NetConnection.Connect.Closed status
Tue Nov 24 2009 10:33:04 : Primary - Disconnected
Tue Nov 24 2009 10:33:05 : Primary - Re-establishing connection, attempt 1
Tue Nov 24 2009 10:33:05 : Primary - Reconnected to FMS/3,0,1,123
Tue Nov 24 2009 10:33:05 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 10:33:06 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:33:06 : Primary - Stream[AGOrlando2] Status: Success
Tue Nov 24 2009 10:33:06 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:33:22 : Audio Encoding Stopped
Tue Nov 24 2009 10:33:22 : Video Encoding Stopped
Tue Nov 24 2009 10:33:22 : Session Stopped
Tue Nov 24 2009 10:33:22 : Primary - Stream[AGOrlando1] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 10:33:23 : Primary - Stream[AGOrlando2] Status: NetStream.Unpublish.Success
Tue Nov 24 2009 10:33:25 : Primary - Stream[AGOrlando1] Status: Success
Tue Nov 24 2009 10:33:25 : Primary - Stream[AGOrlando1] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:33:25 : Primary - Stream[AGOrlando2] Status: Success
Tue Nov 24 2009 10:33:26 : Primary - Stream[AGOrlando2] Status: NetStream.Publish.Start
Tue Nov 24 2009 10:33:26 : Session Started
Tue Nov 24 2009 10:33:26 : Video Encoding Started
Tue Nov 24 2009 10:33:26 : Audio Encoding StartedFMLE is disconneting from FMS after every few minutes.
Problem is between network of FMLE and FMS. So you need to check network conditions between FMLE and server to avoid this problem.
Either network of your machine or server machine is getting lost after every few minutes which is stopping broadcast.
Please check and let me if you find the problem. -
I and others have had an issue where the user clicks on the
Video / Audio activation button and Connect Pro locks up. Another
way to lock it up is to run the Audio wizard. In some cases the
computer testing flash app locks up as well. The window fails to
close. To remove the window one must reboot.
Keep in mind this only occurs on some PC's. Similar
configurations, software and hardware (what works on one will not
the other) between PC's is mind boggling that there is a random
issue. It seems to have problems irregardless to what video or
audio drivers you assign. When you try to close the window you will
get a windows prompt that says:
You chose to end the nonresponsive program, Adobe Acrobat
Connect Add-in 9.0 r177.
or
You chose to end the nonresponsive program, Adobe Acrobat
Connect Add-in 7.0 r455.
This is definitely seems to be a flash player/plug-in issue
with that prompt.
It does not matter if you have your own Enterprise server or
go through the Adobe's hosted Connect Pro server. The same results
occur.
I have contacted Adobe's tech support and was given no
resolve, just a "we can't help you."
A week ago, here on the forum was a couple of postings on
this matter but is missing (Evidently Adobe has been merging the
Macromedia and Adobe forums, thus resulting in the missing topic:
Acrobat Connect Add-in 7.0 r455 has encountered a problem and
needs to close. Add In Crashing when starting camera and voice)
At least I can tell you what I have found in my solo attempt
to resolve this.
Uninstalling and reinstalling adobe software will not work.
Changing browsers will not work as well. Getting the latest webcam
or video capture card drivers fail to resolve the issue. The most
extreme action to perform is to reformat your entire PC- however,
this does not guaranty that it will fix the issue.
Again it is clear that the problem is that Connect Pro cannot
communicate with audio and video drivers. This issue has been
happening since the release of the CP 6 update.
If anyone knows of a easy fix please share it.Here we have several PC's (Dell) that are clone
configurations. All use the same hardware and software, there are
no significant differences between the PC's. That is what makes
this odd. Where one PC works fine, the other does not.
With our system here all of our staff have the same network
permissions, firewall setup. We have our own Enterprise server and
have a direct connection to it without any need for an Edge Server
at this point. It is a vanilla setup. Our connectivity is LAN. The
problem occurs irregardless to user role (host - participant).
In our earlier post we mentioned the same result with Adobe's
own hosted service. Connectivity is not an issue.
We all use the Logitech QuickCam Zoom. As to the driver issue
that you have found, what webcam model/driver version was the
conflict found in and how did you fix it? That information would be
nice to add to our troubleshooting pool for our virtual guests.
We are not convinced that this is the issue for us.
We also use Osprey 210 analog video capture cards in all of
our PC's as well.
We have found that changing the video/audio settings to
different drivers still results with the same lock up.
We have uninstalled drivers for both to see if either was
creating a conflict and found that it does not matter, we get the
same result.
To further the info our PC's are Dell Optiplex 745, dual core
6700 @ 2.66Ghz, with 3GB RAM. Fairly new machines. We are using
Windows XP Professional.
We also have Adobe CS3, and other A/V software. But we have
found no connection between this issue and possible conflicts with
software.
When we reformatted a PC, we conducted tests to see if it
were drivers or software that caused it. All installations under
our control did not seem to be the result of this issue.
We are debating whether to conduct another test to see if it
could be a Microsoft update or patch that could have resulted in
this. Again all of this issue did not begin until after the Connect
Pro 6 service pack 2 was released.
We have installed service pack 3 to see if this was resolved
but it was not.
Again I hope this helps. Anyone find similar problems?
Fixes? -
"video capture cards Osprey 100 and 2102
I'm doing FMLE eSTREAM with 3.0 and I need a capture card. I have a doubt about osprey cards 100 and 210. What is the output format of these cards. buy the card and install the drivers and is fully compatible with 3.0 FMLE,the output format is compatible with the formats accepted FMLE 3.0 (I'm using H.264 compression mpeg4 formats are accepted) or need to use that program osprey "SIMULSTREAM "
Thank you very much for your reply
Enrique Figueroa Requena
[email protected]Tell me to summarize I can be used osprey 100 capture card that converts pal to raw format. the encoded or compressed FMLE 3.1 using (in my case) H.264 and then the flash media server completes streaming.
Tell me if using capture cards ATI give me an output format H.264 and use the FMLE3.1 again and then compress it using H.264 and Flash media server completes streaming, is this correct? -
Unable to record audio with FMLE/Osprey 700 HD
I have deployed a C# desktop application on a Server machine (Windows Server 2003 SP2), which wakes up and streams the incoming video/audio signals to a Flash media server. The Server machine is using this card (ViewCast Osprey-700 HD Video Capture Card) for getting the audio/video input.
The problem is that, I can successfully stream the video but not audio. If I start FMLE GUI the audio driver is not listed and it complains that "an audio device was not found". I also tried to run my app as a Scheduled task under a different user than the one I use for Remote Desktop, but it fails for the audio.
I tried updating the driver with no success. Any clue?
- Fahadhttp://forums.adobe.com/thread/941171
I have more or less the same issue, it just doesnt show any audio devices.
Im thinking FMLE is not looking at the right spot for audio devices. -
My daughter has an addiction to computer and I thought she couldn't get thru my FoxFilter, never thought there was something she could mess up on Firefox itself. Every time I start my computer it runs and runs, and takes forever for anything to download. I understand why. I just don't know how to fix it. Since there are 178,210 of these personas been added to firefox. Thanks for your help.
== This happened ==
Not sure how often
== Maybe alot was done on 7/30 or 7/31/10Did she install the Personas Plus extension (Tools > Add-ons > Extensions)?
Firefox only keeps the last 8 installed personas by default.
See [[Troubleshooting extensions and themes]] -
[SOLVED] Xorg freeze with nvidia GeForce 210 when resizing terminal
Hello,
I am working on Archlinux. My computer freeze when I resize a terminal window.
To reproduce the problem, I follow the below steps :
1- launch openbox (with tint2, xcompmgr and nitrogen)
2- start the "terminal" console emulator (with true transparent background)
3- launch opera and go to a website which take a while to load (with a lot of data) (I used http://www.lemonde.fr)
4- while the website is loading, switch to the terminal window and double click on the title bar to maximize it
5- the box freeze
I am not able to take the control back. I cannot exit or kill Xorg / Openbox. I cannot switch to a text terminal (ttyx). No key sequence is working.
Only a hard reset of the box is working.
I have tried to disable the transparent background of the terminal window without success.
I have tried to not start xcompmgr without success.
The problem also occurs with rxvt-unicode instead of terminal.
It seems the problem happens more often when using console emulator based on vte.
vte itself has the same issue.
The only workaround I have found is to disable the harware acceleration with the below parameter in the xorg.conf file:
Option "RenderAccel" "true"
The problem with this workaround are poor graphical performances.
Could you please let me know if you have any idea / clue to identify / fix this problem ?
Thanks and regards
uname -a
Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz GenuineIntel GNU/Linux
versions
nvidia 270.41.06-1
nvidia-utils 270.41.06-1
kernel26 2.6.38.4-1
openbox 3.4.11.2-2
xcompmgr 1.1.5-1
.xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec ck-launch-session openbox-session
.config/openbox/autostart.sh
# This shell script is run before Openbox launches.
# Environment variables set here are passed to the Openbox session.
# Set a background color
BG=""
if which hsetroot >/dev/null 2>&1; then
BG=hsetroot
else
if which esetroot >/dev/null 2>&1; then
BG=esetroot
else
if which xsetroot >/dev/null 2>&1; then
BG=xsetroot
fi
fi
fi
test -z $BG || $BG -solid "#303030"
# D-bus
if which dbus-launch >/dev/null 2>&1 && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
eval `dbus-launch --sh-syntax --exit-with-session`
fi
# Make GTK apps look and behave how they were set up in the gnome config tools
if test -x /usr/libexec/gnome-settings-daemon >/dev/null; then
/usr/libexec/gnome-settings-daemon &
elif which gnome-settings-daemon >/dev/null 2>&1; then
gnome-settings-daemon &
# Make GTK apps look and behave how they were set up in the XFCE config tools
elif which xfce-mcs-manager >/dev/null 2>&1; then
xfce-mcs-manager n &
fi
# Preload stuff for KDE apps
if which start_kdeinit >/dev/null 2>&1; then
LD_BIND_NOW=true start_kdeinit --new-startup +kcminit_startup &
fi
# Run XDG autostart things. By default don't run anything desktop-specific
# See xdg-autostart --help more info
DESKTOP_ENV="OPENBOX"
if which /usr/lib/openbox/xdg-autostart >/dev/null 2>&1; then
/usr/lib/openbox/xdg-autostart $DESKTOP_ENV
fi
xcompmgr &
nitrogen --set-zoom-fill /mnt/data/pictures/flower.jpg &
tint2 &
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "record"
Load "dbe"
Load "dri2"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
Option "RenderAccel" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Xorg.0.log
[ 485.566]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 485.566] X Protocol Version 11, Revision 0
[ 485.566] Build Operating System: Linux 2.6.38-ARCH i686
[ 485.566] Current Operating System: Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686
[ 485.566] Kernel command line: root=/dev/sda3 ro
[ 485.566] Build Date: 16 April 2011 12:05:35PM
[ 485.566]
[ 485.566] Current version of pixman: 0.20.2
[ 485.567] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 485.567] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 485.567] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 27 20:00:28 2011
[ 485.567] (==) Using config file: "/etc/X11/xorg.conf"
[ 485.568] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 485.568] (==) ServerLayout "X.org Configured"
[ 485.568] (**) |-->Screen "Screen0" (0)
[ 485.568] (**) | |-->Monitor "Monitor0"
[ 485.568] (**) | |-->Device "Card0"
[ 485.568] (**) |-->Input Device "Mouse0"
[ 485.568] (**) |-->Input Device "Keyboard0"
[ 485.568] (==) Automatically adding devices
[ 485.568] (==) Automatically enabling devices
[ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 485.568] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 485.568] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 485.568] (**) Extension "Composite" is enabled
[ 485.568] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 485.568] (WW) Disabling Mouse0
[ 485.568] (WW) Disabling Keyboard0
[ 485.568] (II) Loader magic: 0x81f4ee0
[ 485.568] (II) Module ABI versions:
[ 485.568] X.Org ANSI C Emulation: 0.4
[ 485.568] X.Org Video Driver: 10.0
[ 485.568] X.Org XInput driver : 12.2
[ 485.568] X.Org Server Extension : 5.0
[ 485.569] (--) PCI:*(0:1:0:0) 10de:0a65:1043:8334 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 485.569] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 485.569] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "dri" will be loaded by default.
[ 485.569] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) LoadModule: "extmod"
[ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 485.569] (II) Module extmod: vendor="X.Org Foundation"
[ 485.569] compiled for 1.10.1, module version = 1.0.0
[ 485.569] Module class: X.Org Server Extension
[ 485.569] ABI class: X.Org Server Extension, version 5.0
[ 485.569] (II) Loading extension MIT-SCREEN-SAVER
[ 485.569] (II) Loading extension XFree86-VidModeExtension
[ 485.569] (II) Loading extension XFree86-DGA
[ 485.569] (II) Loading extension DPMS
[ 485.569] (II) Loading extension XVideo
[ 485.569] (II) Loading extension XVideo-MotionCompensation
[ 485.569] (II) Loading extension X-Resource
[ 485.569] (II) LoadModule: "glx"
[ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 485.588] (II) Module glx: vendor="NVIDIA Corporation"
[ 485.588] compiled for 4.0.2, module version = 1.0.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:11:28 PDT 2011
[ 485.589] (II) Loading extension GLX
[ 485.589] (II) LoadModule: "record"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 485.589] (II) Module record: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.13.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension RECORD
[ 485.589] (II) LoadModule: "dbe"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 485.589] (II) Module dbe: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.0.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension DOUBLE-BUFFER
[ 485.589] (II) LoadModule: "dri2"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 485.589] (II) Module dri2: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.2.0
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension DRI2
[ 485.589] (II) LoadModule: "dri"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 485.589] (II) Module dri: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.0.0
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension XFree86-DRI
[ 485.589] (II) LoadModule: "nvidia"
[ 485.589] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 485.590] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 485.590] compiled for 4.0.2, module version = 1.0.0
[ 485.590] Module class: X.Org Video Driver
[ 485.590] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:51 PDT 2011
[ 485.590] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 485.590] (--) using VT number 7
[ 485.593] (II) Loading sub module "fb"
[ 485.593] (II) LoadModule: "fb"
[ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 485.593] (II) Module fb: vendor="X.Org Foundation"
[ 485.593] compiled for 1.10.1, module version = 1.0.0
[ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
[ 485.593] (II) Loading sub module "wfb"
[ 485.593] (II) LoadModule: "wfb"
[ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 485.593] (II) Module wfb: vendor="X.Org Foundation"
[ 485.593] compiled for 1.10.1, module version = 1.0.0
[ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
[ 485.593] (II) Loading sub module "ramdac"
[ 485.593] (II) LoadModule: "ramdac"
[ 485.593] (II) Module "ramdac" already built-in
[ 485.593] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 485.593] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 485.593] (==) NVIDIA(0): RGB weight 888
[ 485.593] (==) NVIDIA(0): Default visual is TrueColor
[ 485.593] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 485.593] (**) NVIDIA(0): Option "RenderAccel" "true"
[ 485.593] (**) NVIDIA(0): Enabling RENDER acceleration
[ 485.953] (II) NVIDIA(GPU-0): Display (LG Electronics L222W (CRT-0)) does not support NVIDIA
[ 485.953] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 485.986] (II) NVIDIA(GPU-0): Display (PANASONIC-TV (DFP-1)) does not support NVIDIA 3D
[ 485.986] (II) NVIDIA(GPU-0): Vision stereo.
[ 485.987] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[ 485.987] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 485.987] (--) NVIDIA(0): VideoBIOS: 70.18.39.00.17
[ 485.987] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 485.987] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 485.987] (--) NVIDIA(0): Connected display device(s) on GeForce 210 at PCI:1:0:0
[ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0)
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1)
[ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0): 400.0 MHz maximum pixel clock
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): 165.0 MHz maximum pixel clock
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): Internal Single Link TMDS
[ 486.026] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 486.026] (==) NVIDIA(0):
[ 486.026] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 486.026] (==) NVIDIA(0): will be used as the requested mode.
[ 486.026] (==) NVIDIA(0):
[ 486.026] (II) NVIDIA(0): Validated modes:
[ 486.026] (II) NVIDIA(0): "nvidia-auto-select"
[ 486.026] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 486.054] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 486.054] (--) NVIDIA(0): option
[ 486.054] (--) Depth 24 pixmap format is 32 bpp
[ 486.054] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 486.056] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 486.056] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 486.056] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 486.056] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 486.056] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 486.056] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 486.056] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 486.056] (II) NVIDIA(0): Config Options in the README.
[ 486.058] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 486.286] (II) Loading extension NV-GLX
[ 486.314] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 486.314] (==) NVIDIA(0): Backing store disabled
[ 486.314] (==) NVIDIA(0): Silken mouse enabled
[ 486.314] (==) NVIDIA(0): DPMS enabled
[ 486.314] (II) Loading extension NV-CONTROL
[ 486.315] (II) Loading extension XINERAMA
[ 486.315] (II) Loading sub module "dri2"
[ 486.315] (II) LoadModule: "dri2"
[ 486.315] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 486.315] (II) Module dri2: vendor="X.Org Foundation"
[ 486.315] compiled for 1.10.1, module version = 1.2.0
[ 486.315] ABI class: X.Org Server Extension, version 5.0
[ 486.315] (II) NVIDIA(0): [DRI2] Setup complete
[ 486.315] (==) RandR enabled
[ 486.315] (II) Initializing built-in extension Generic Event Extension
[ 486.315] (II) Initializing built-in extension SHAPE
[ 486.315] (II) Initializing built-in extension MIT-SHM
[ 486.315] (II) Initializing built-in extension XInputExtension
[ 486.315] (II) Initializing built-in extension XTEST
[ 486.315] (II) Initializing built-in extension BIG-REQUESTS
[ 486.315] (II) Initializing built-in extension SYNC
[ 486.315] (II) Initializing built-in extension XKEYBOARD
[ 486.315] (II) Initializing built-in extension XC-MISC
[ 486.315] (II) Initializing built-in extension SECURITY
[ 486.315] (II) Initializing built-in extension XINERAMA
[ 486.315] (II) Initializing built-in extension XFIXES
[ 486.315] (II) Initializing built-in extension RENDER
[ 486.315] (II) Initializing built-in extension RANDR
[ 486.315] (II) Initializing built-in extension COMPOSITE
[ 486.315] (II) Initializing built-in extension DAMAGE
[ 486.317] (II) Initializing extension GLX
[ 486.364] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 486.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 486.364] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 486.364] (II) LoadModule: "evdev"
[ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.365] (II) Module evdev: vendor="X.Org Foundation"
[ 486.365] compiled for 1.10.0, module version = 2.6.0
[ 486.365] Module class: X.Org XInput Driver
[ 486.365] ABI class: X.Org XInput driver, version 12.2
[ 486.365] (II) Using input driver 'evdev' for 'Power Button'
[ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.365] (**) Power Button: always reports core events
[ 486.365] (**) Power Button: Device: "/dev/input/event1"
[ 486.376] (--) Power Button: Found keys
[ 486.376] (II) Power Button: Configuring as keyboard
[ 486.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 486.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 486.376] (**) Option "xkb_rules" "evdev"
[ 486.376] (**) Option "xkb_model" "evdev"
[ 486.376] (**) Option "xkb_layout" "fr"
[ 486.397] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 486.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 486.397] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 486.397] (II) Using input driver 'evdev' for 'Power Button'
[ 486.397] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.397] (**) Power Button: always reports core events
[ 486.397] (**) Power Button: Device: "/dev/input/event0"
[ 486.413] (--) Power Button: Found keys
[ 486.413] (II) Power Button: Configuring as keyboard
[ 486.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 486.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 486.413] (**) Option "xkb_rules" "evdev"
[ 486.413] (**) Option "xkb_model" "evdev"
[ 486.413] (**) Option "xkb_layout" "fr"
[ 486.415] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
[ 486.415] (II) No input driver/identifier specified (ignoring)
[ 486.418] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.418] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 486.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.418] (**) Microsoft Wired Keyboard 600: always reports core events
[ 486.418] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
[ 486.430] (--) Microsoft Wired Keyboard 600: Found keys
[ 486.430] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 486.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/input/input3/event3"
[ 486.430] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 486.430] (**) Option "xkb_rules" "evdev"
[ 486.430] (**) Option "xkb_model" "evdev"
[ 486.430] (**) Option "xkb_layout" "fr"
[ 486.430] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.430] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 486.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.430] (**) Microsoft Wired Keyboard 600: always reports core events
[ 486.430] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 486.446] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 486.446] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 486.446] (--) Microsoft Wired Keyboard 600: Found relative axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found absolute axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found keys
[ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as mouse
[ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 486.446] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 486.446] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 486.446] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 486.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.1/input/input4/event4"
[ 486.446] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 486.446] (**) Option "xkb_rules" "evdev"
[ 486.446] (**) Option "xkb_model" "evdev"
[ 486.446] (**) Option "xkb_layout" "fr"
[ 486.447] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
[ 486.447] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
[ 486.447] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 486.447] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 486.447] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.447] (II) No input driver/identifier specified (ignoring)
[ 486.447] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[ 486.447] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 486.447] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 486.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.447] (**) Logitech USB Optical Mouse: always reports core events
[ 486.447] (**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
[ 486.473] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
[ 486.473] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 486.473] (--) Logitech USB Optical Mouse: Found relative axes
[ 486.473] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 486.473] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 486.473] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 486.473] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 486.473] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 486.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/input/input5/event5"
[ 486.473] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 486.473] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 486.473] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 486.473] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 486.473] (II) No input driver/identifier specified (ignoring)
[ 525.530] (WW) NVIDIA(0): The NVIDIA X driver has encountered too many errors. Falling
[ 525.530] (WW) NVIDIA(0): back to write-back cached memory.
dmesg.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110415 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 7fdd0000 - 7ff80000
[ 0.000000] Allocated new RAMDISK: 3764e000 - 377fd262
[ 0.000000] Move RAMDISK from 000000007fdd0000 - 000000007ff7f261 to 3764e000 - 377fd261
[ 0.000000] ACPI: RSDP 000fae70 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7ff90100 0004C (v01 MSTEST OEMXSDT 09000830 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff90290 000F4 (v03 MSTEST OEMFACP 09000830 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
[ 0.000000] ACPI: FACS 7ff9e000 00040
[ 0.000000] ACPI: APIC 7ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524062
[ 0.000000] free_area_init_node: node 0, pgdat c1450b00, node_mem_map f664d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27392 r0 d21760 u1048576
[ 0.000000] pcpu-alloc: s27392 r0 d21760 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519966
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10483200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
[ 0.000000] Memory: 2061020k/2096704k available (3182k kernel code, 35228k reserved, 1259k data, 424k init, 1187400k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
[ 0.000000] .data : 0xc131bacb - 0xc1456a00 (1259 kB)
[ 0.000000] .text : 0xc1000000 - 0xc131bacb (3182 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f500c000 soft=f500e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3066.221 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6134.96 BogoMIPS (lpj=10220736)
[ 0.003418] pid_max: default: 32768 minimum: 301
[ 0.003486] Security Framework initialized
[ 0.003528] AppArmor: AppArmor disabled by boot time parameter
[ 0.006682] Mount-cache hash table entries: 512
[ 0.006865] Initializing cgroup subsys ns
[ 0.006906] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.006960] Initializing cgroup subsys cpuacct
[ 0.007007] Initializing cgroup subsys memory
[ 0.007052] Initializing cgroup subsys devices
[ 0.007092] Initializing cgroup subsys freezer
[ 0.007133] Initializing cgroup subsys net_cls
[ 0.007172] Initializing cgroup subsys blkio
[ 0.007238] CPU: Physical Processor ID: 0
[ 0.007277] CPU: Processor Core ID: 0
[ 0.007317] mce: CPU supports 6 MCE banks
[ 0.007361] CPU0: Thermal monitoring enabled (TM2)
[ 0.007402] using mwait in idle threads.
[ 0.008216] ACPI: Core revision 20110112
[ 0.013386] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046907] CPU0: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz stepping 0a
[ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.056745] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.070012] CPU 1 irqstacks, hard=f50d6000 soft=f50d8000
[ 0.070017] Booting Node 0, Processors #1
[ 0.006666] Initializing CPU#1
[ 0.166676] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.169997] Brought up 2 CPUs
[ 0.170040] Total of 2 processors activated (12270.81 BogoMIPS).
[ 0.171248] devtmpfs: initialized
[ 0.171248] NET: Registered protocol family 16
[ 0.171248] ACPI: bus type pci registered
[ 0.171248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.171248] PCI: not using MMCONFIG
[ 0.171248] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.171248] PCI: Using configuration type 1 for base access
[ 0.171248] bio: create slab <bio-0> at 0
[ 0.173388] ACPI: EC: Look up EC in DSDT
[ 0.174194] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.179022] ACPI: SSDT 7ff9e0c0 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.179316] ACPI: Dynamic OEM Table Load:
[ 0.179408] ACPI: SSDT (null) 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.179643] ACPI: SSDT 7ff9e2d0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.179932] ACPI: Dynamic OEM Table Load:
[ 0.180025] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.180248] ACPI: Interpreter enabled
[ 0.180292] ACPI: (supports S0 S3 S4 S5)
[ 0.180445] ACPI: Using IOAPIC for interrupt routing
[ 0.180500] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.180904] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.180958] PCI: Using MMCONFIG for extended config space
[ 0.185933] ACPI: No dock devices found.
[ 0.185973] HEST: Table not found.
[ 0.186014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.186260] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.186304] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.186346] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.186398] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.186450] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.186509] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
[ 0.186539] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
[ 0.186562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.186564] pci 0000:00:01.0: PME# disabled
[ 0.186592] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.186625] pci 0000:00:1a.0: reg 20: [io 0xa880-0xa89f]
[ 0.186660] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.186692] pci 0000:00:1a.1: reg 20: [io 0xac00-0xac1f]
[ 0.186724] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.186740] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.186797] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.186801] pci 0000:00:1a.7: PME# disabled
[ 0.186817] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.186829] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.186873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.186876] pci 0000:00:1b.0: PME# disabled
[ 0.186891] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.186935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.186938] pci 0000:00:1c.0: PME# disabled
[ 0.186956] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.187000] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.187003] pci 0000:00:1c.4: PME# disabled
[ 0.187019] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.187063] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.187066] pci 0000:00:1c.5: PME# disabled
[ 0.187082] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.187114] pci 0000:00:1d.0: reg 20: [io 0xa400-0xa41f]
[ 0.187137] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.187170] pci 0000:00:1d.1: reg 20: [io 0xa480-0xa49f]
[ 0.187193] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.187226] pci 0000:00:1d.2: reg 20: [io 0xa800-0xa81f]
[ 0.187256] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.187272] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[ 0.187329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.187333] pci 0000:00:1d.7: PME# disabled
[ 0.187346] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.187393] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
[ 0.187462] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.188664] pci 0000:00:1f.2: [8086:2821] type 0 class 0x000106
[ 0.188677] pci 0000:00:1f.2: reg 10: [io 0xa080-0xa087]
[ 0.188684] pci 0000:00:1f.2: reg 14: [io 0xa000-0xa003]
[ 0.188690] pci 0000:00:1f.2: reg 18: [io 0x9c00-0x9c07]
[ 0.188696] pci 0000:00:1f.2: reg 1c: [io 0x9880-0x9883]
[ 0.188703] pci 0000:00:1f.2: reg 20: [io 0x9800-0x981f]
[ 0.188709] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
[ 0.188733] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.188736] pci 0000:00:1f.2: PME# disabled
[ 0.188747] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.188756] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.188778] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.188824] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
[ 0.188832] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.188841] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.188849] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.188856] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
[ 0.188862] pci 0000:01:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.188895] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.188903] pci 0000:01:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.188969] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.189011] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.189014] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.189017] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.189048] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.189091] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.189094] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.189098] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.189144] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.189223] pci 0000:03:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
[ 0.189236] pci 0000:03:00.0: reg 30: [mem 0xfbee0000-0xfbeeffff pref]
[ 0.189263] pci 0000:03:00.0: PME# supported from D3hot
[ 0.189268] pci 0000:03:00.0: PME# disabled
[ 0.189293] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.189315] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
[ 0.189327] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
[ 0.189339] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
[ 0.189351] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
[ 0.189363] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
[ 0.189426] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.189491] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.189533] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.189536] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.189540] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.189589] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.189609] pci 0000:02:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 0.189620] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
[ 0.189658] pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 0.189693] pci 0000:02:00.0: supports D1 D2
[ 0.189694] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189698] pci 0000:02:00.0: PME# disabled
[ 0.193338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.193385] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.193390] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.193397] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193434] pci 0000:05:02.0: [1033:0035] type 0 class 0x000c03
[ 0.193452] pci 0000:05:02.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
[ 0.193514] pci 0000:05:02.0: supports D1 D2
[ 0.193516] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.193519] pci 0000:05:02.0: PME# disabled
[ 0.193533] pci 0000:05:02.1: [1033:0035] type 0 class 0x000c03
[ 0.193546] pci 0000:05:02.1: reg 10: [mem 0xfbffe000-0xfbffefff]
[ 0.193601] pci 0000:05:02.1: supports D1 D2
[ 0.193602] pci 0000:05:02.1: PME# supported from D0 D1 D2 D3hot
[ 0.193605] pci 0000:05:02.1: PME# disabled
[ 0.193619] pci 0000:05:02.2: [1033:00e0] type 0 class 0x000c03
[ 0.193633] pci 0000:05:02.2: reg 10: [mem 0xfbfffc00-0xfbfffcff]
[ 0.193687] pci 0000:05:02.2: supports D1 D2
[ 0.193689] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.193692] pci 0000:05:02.2: PME# disabled
[ 0.193711] pci 0000:05:03.0: [104c:8023] type 0 class 0x000c00
[ 0.193726] pci 0000:05:03.0: reg 10: [mem 0xfbfff000-0xfbfff7ff]
[ 0.193735] pci 0000:05:03.0: reg 14: [mem 0xfbff8000-0xfbffbfff]
[ 0.193786] pci 0000:05:03.0: supports D1 D2
[ 0.193787] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.193791] pci 0000:05:03.0: PME# disabled
[ 0.193806] pci 0000:05:04.0: [11ab:4320] type 0 class 0x000200
[ 0.193823] pci 0000:05:04.0: reg 10: [mem 0xfbff4000-0xfbff7fff]
[ 0.193831] pci 0000:05:04.0: reg 14: [io 0xe800-0xe8ff]
[ 0.193867] pci 0000:05:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
[ 0.193886] pci 0000:05:04.0: supports D1 D2
[ 0.193888] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193891] pci 0000:05:04.0: PME# disabled
[ 0.193926] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.193971] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.193974] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.193978] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193980] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.193982] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.193983] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.193985] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.193987] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.194003] pci_bus 0000:00: on NUMA node 0
[ 0.194005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.194127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.194156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.194243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.194277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.194313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.194355] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.199969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.200342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.200724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.201105] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.201486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.201868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.202249] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.202634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.203051] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203107] vgaarb: loaded
[ 0.203206] PCI: Using ACPI for IRQ routing
[ 0.203247] PCI: pci_cache_line_size set to 64 bytes
[ 0.203358] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.203360] reserve RAM buffer: 000000007ff90000 - 000000007fffffff
[ 0.203439] NetLabel: Initializing
[ 0.203478] NetLabel: domain hash size = 128
[ 0.203518] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.203565] NetLabel: unlabeled traffic allowed by default
[ 0.203608] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.203653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.203797] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.210012] Switching to clocksource hpet
[ 0.211034] pnp: PnP ACPI init
[ 0.211084] ACPI: bus type pnp registered
[ 0.211173] pnp 00:00: [bus 00-ff]
[ 0.211175] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.211177] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.211179] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.211180] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.211182] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.211184] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.211222] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.211229] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.211267] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.211311] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.211335] pnp 00:02: [dma 4]
[ 0.211337] pnp 00:02: [io 0x0000-0x000f]
[ 0.211338] pnp 00:02: [io 0x0081-0x0083]
[ 0.211339] pnp 00:02: [io 0x0087]
[ 0.211341] pnp 00:02: [io 0x0089-0x008b]
[ 0.211342] pnp 00:02: [io 0x008f]
[ 0.211343] pnp 00:02: [io 0x00c0-0x00df]
[ 0.211367] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.211374] pnp 00:03: [io 0x0070-0x0071]
[ 0.211380] pnp 00:03: [irq 8]
[ 0.211403] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.211412] pnp 00:04: [io 0x0061]
[ 0.211435] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.211441] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.211444] pnp 00:05: [irq 13]
[ 0.211469] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.211669] pnp 00:06: [irq 4]
[ 0.211671] pnp 00:06: [dma 0 disabled]
[ 0.211672] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.211721] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.211835] pnp 00:07: [io 0x0000-0xffffffff disabled]
[ 0.211837] pnp 00:07: [io 0x0000-0xffffffff disabled]
[ 0.211838] pnp 00:07: [io 0x0290-0x0297]
[ 0.211879] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.211922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211997] pnp 00:08: [io 0x0010-0x001f]
[ 0.211999] pnp 00:08: [io 0x0022-0x003f]
[ 0.212000] pnp 00:08: [io 0x0044-0x005f]
[ 0.212002] pnp 00:08: [io 0x0062-0x0063]
[ 0.212003] pnp 00:08: [io 0x0065-0x006f]
[ 0.212004] pnp 00:08: [io 0x0072-0x007f]
[ 0.212006] pnp 00:08: [io 0x0080]
[ 0.212007] pnp 00:08: [io 0x0084-0x0086]
[ 0.212008] pnp 00:08: [io 0x0088]
[ 0.212010] pnp 00:08: [io 0x008c-0x008e]
[ 0.212011] pnp 00:08: [io 0x0090-0x009f]
[ 0.212012] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.212014] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.212015] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.212016] pnp 00:08: [io 0x0800-0x087f]
[ 0.212018] pnp 00:08: [io 0x0400-0x03ff disabled]
[ 0.212019] pnp 00:08: [io 0x0480-0x04bf]
[ 0.212021] pnp 00:08: [mem 0xffafe000-0xffb0cbff]
[ 0.212022] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.212024] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.212025] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[ 0.212026] pnp 00:08: [mem 0xfff00000-0xfffffffe]
[ 0.212028] pnp 00:08: [mem 0xfebfe000-0xfebfec00]
[ 0.212089] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.212132] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.212174] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.212216] system 00:08: [mem 0xffafe000-0xffb0cbff] could not be reserved
[ 0.212259] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.212302] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.212345] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.212388] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.212430] system 00:08: [mem 0xfebfe000-0xfebfec00] has been reserved
[ 0.212473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212521] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.212547] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.212580] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.212581] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.212625] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.212668] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.212712] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212761] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.212801] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.212844] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212967] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.212969] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.212971] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.212972] pnp 00:0c: [mem 0x00100000-0x7fffffff]
[ 0.212974] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[ 0.213025] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.213068] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.213111] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.213154] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.213198] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.213198] Switched to NOHz mode on CPU #0
[ 0.213237] Switched to NOHz mode on CPU #1
[ 0.213286] pnp: PnP ACPI: found 13 devices
[ 0.213326] ACPI: ACPI bus type pnp unregistered
[ 0.249481] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[ 0.249526] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.249579] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.249632] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.249675] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80800000-0x808000ff]
[ 0.249720] pci 0000:00:1f.3: BAR 0: set to [mem 0x80800000-0x808000ff] (PCI address [0x80800000-0x808000ff])
[ 0.249775] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.249816] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.249859] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.249902] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.249956] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.250011] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.250055] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
[ 0.250099] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.250154] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.250195] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.250239] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.250283] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.250338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.250380] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.250424] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.250468] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.250523] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.250565] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.250609] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.250653] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.250702] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250746] pci 0000:00:01.0: setting latency timer to 64
[ 0.250750] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.250792] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250836] pci 0000:00:1c.0: setting latency timer to 64
[ 0.250840] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250884] pci 0000:00:1c.4: setting latency timer to 64
[ 0.250890] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.250933] pci 0000:00:1c.5: setting latency timer to 64
[ 0.250938] pci 0000:00:1e.0: setting latency timer to 64
[ 0.250941] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.250943] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.250944] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.250946] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.250948] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.250949] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.250951] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.250953] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.250955] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.250956] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
[ 0.250958] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.250960] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.250961] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.250963] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.250965] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.250966] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.250968] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.250970] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.250972] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.250973] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.250975] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.250977] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.250978] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.250980] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
[ 0.251002] NET: Registered protocol family 2
[ 0.251085] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.251263] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.251592] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.251779] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.251822] TCP reno registered
[ 0.251861] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.252025] NET: Registered protocol family 1
[ 0.295104] pci 0000:01:00.0: Boot video device
[ 0.295141] PCI: CLS 32 bytes, default 64
[ 0.295174] Unpacking initramfs...
[ 0.317387] Freeing initrd memory: 1728k freed
[ 0.318002] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 0.318046] apm: disabled - APM is not SMP safe.
[ 0.318193] audit: initializing netlink socket (disabled)
[ 0.318243] type=2000 audit(1303935493.316:1): initialized
[ 0.318520] highmem bounce pool size: 64 pages
[ 0.318562] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.320047] VFS: Disk quotas dquot_6.5.2
[ 0.320145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.320261] msgmni has been set to 1709
[ 0.320435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.320488] io scheduler noop registered
[ 0.320527] io scheduler deadline registered
[ 0.320574] io scheduler cfq registered (default)
[ 0.320710] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.320734] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.320771] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.320798] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.320848] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.320875] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.320923] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.320950] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.321092] intel_idle: MWAIT substates: 0x22220
[ 0.321094] intel_idle: does not run on family 6 model 23
[ 0.321105] ERST: Table is not found!
[ 0.321155] isapnp: Scanning for PnP cards...
[ 0.676796] isapnp: No Plug & Play device found
[ 0.676877] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.697390] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920667] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.973728] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.976563] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.976631] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.976752] mousedev: PS/2 mouse device common for all mice
[ 0.976847] rtc_cmos 00:03: RTC can wake from S4
[ 1.000070] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.000137] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.000200] cpuidle: using governor ladder
[ 1.000240] cpuidle: using governor menu
[ 1.000436] TCP cubic registered
[ 1.000476] NET: Registered protocol family 17
[ 1.000521] Registering the dns_resolver key type
[ 1.000569] Using IPI No-Shortcut mode
[ 1.000679] PM: Hibernation image not present or could not be loaded.
[ 1.000682] registered taskstats version 1
[ 1.001054] rtc_cmos 00:03: setting system clock to 2011-04-27 20:18:14 UTC (1303935494)
[ 1.001128] Initalizing network drop monitor service
[ 1.001211] Freeing unused kernel memory: 424k freed
[ 1.005982] <30>udev[38]: starting version 167
[ 1.107427] SCSI subsystem initialized
[ 1.127245] libata version 3.00 loaded.
[ 1.131006] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.131057] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.131134] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.131436] scsi0 : pata_jmicron
[ 1.131554] scsi1 : pata_jmicron
[ 1.132024] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.132068] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.142526] ahci 0000:00:1f.2: version 3.0
[ 1.142536] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.142608] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.142644] ahci: SSS flag set, parallel bus scan disabled
[ 1.142711] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.142765] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.142819] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.174032] scsi2 : ahci
[ 1.174136] scsi3 : ahci
[ 1.174235] scsi4 : ahci
[ 1.174335] scsi5 : ahci
[ 1.174434] scsi6 : ahci
[ 1.174532] scsi7 : ahci
[ 1.174699] ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 44
[ 1.174752] ata4: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 44
[ 1.174804] ata5: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff200 irq 44
[ 1.174856] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff280 irq 44
[ 1.174908] ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff300 irq 44
[ 1.174960] ata8: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 44
[ 1.175036] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level,Hi jasonwryan,
Your thread helps a lot. I saw a lot of posts but not this one.
This workaround is fine for me to wait the fix.
Thanks a lot
Workaround :
It seems the problem might be linked to transparent items like background.
As explained in the above thread :
According to the bug report the nVidia driver is freaking out and creating too many events, which causes an event buffer in Xorg to overflow. It works OK with the older Xorg, though.
So the temporary solution is to downgrade 3 packages.
Install the tool to downgrade
> yaourt -Sy downgrade
Downgrade
Note the item number can change
> downgrade xf86-input-evdev
Hit "s" key
Choose 2 (xf86-input-evdev-2.6.0-2-i686.pkg.tar.xz)
> downgrade xorg-server
Hit "s" key
Choose 1 (xorg-server-1.9.4.901-1-i686.pkg.tar.xz)
> downgrade xorg-server-common
Hit "s" key
Choose 1 (xorg-server-common-1.9.4.901-1-i686.pkg.tar.xz)
Be carefull : don't update these 3 packages when updating your system (pacman -Syu) since it is not fixed.
Last edited by shefla (2011-04-27 22:36:37) -
Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file
Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
SenthilI assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard -
While F-92 posting with T type 210 not possible (No acquisition posted)
Hi
Asset Retirement Not Possible
We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
Posting with trans.type 210 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Ajay
yes we are using Group Assets for income tax depreciation
when checked at AS83 no values found under taken over value for the group asset
***. aquistion val - 0
and all other values are zero
Edited by: johnrambo on Oct 4, 2010 12:09 PM
Moderator: Don't repost threads which were locked by moderatorHi
As I said, go to AS82 and upload the Income tax values for this group asset....
Unless you do that, system wont allow you to proceed.. May be you can enter a nominal value if it is important to sell the asset now and later on correct it
Regards
Ajay M -
Asset Retirement (ABAON) error - Posting with trans.type 210 not possible
HI All,
I was trying to sell an asset using transaction ABAON which is fully depreciated, but I am getting the error -
" Posting with trans.type 210 not possible (No acquisition posted)"
The Scenario is, there is an asset(car) which was uploaded during implimentation and it got depreciated fully in the month of april.
The same asset(car, which is fully depreciated) is sold for an amount of Rs 40000/-.
So, I was trying to post it with some revenue vlaue in transaction ABAON, but I am getting the above error.
(The Asset value was an uploaded during implimentation,it was not an acquisition value from SAP. It was an uploaded value from legacy data)
Could any one help in this, or let me know the correct process for this kind of transactions.
Awaiting for a reply.
Regards,
UpendraHI Mamta,
Thanks for the reply.
While Uploading the data was uploaded as asset balance upload for prior year with value.
Plase let me know what do you propose, to be done for this.
Regards, -
FI _AA errr Posting with trans.type 210 not possible (No acquisition posted
Asset Retirement Not Possible
Dear,
We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
Posting with trans.type 210 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Can anyone Help on this topic
Regards,
rambo
deleted
Moderator: Please, search SDN*Hi Rambo
I think you are using Group Assets for income tax depreciation
If yes, have you uploaded values into Group assets from AS82? Can you please check this and revert
Regards
Ajay M -
Posting with trans.type 210 not possible (No acquisition posted)
Hi,
While doing asset retirment through f-02 we are facing this error
Posting with trans.type 210 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Please provide solution.
Regards
Kuldeep singhHi
Values are there in the asset .
capitalisation date is 21.05.2008. and the value in transaction tab is 149,715.00 Rs. Is there other way to retire the current year assets.
regards
Kuldeep singh -
HP Mini 210-4000 Blue Screen of Death PAGE_FAULT_IN_NONPAGED_AREA error
I've been up and down the Forums here with no specific luck, unfortunately, so I'm going to ask even if this has been queried and solved in another part of the site which I may have missed.
I am trying to sort out a friend's HP Mini Notebook, model HP Mini 210-4125sa. The machine started up well enough until a week ago, when it suddenly decided to blue screen.
The specific error message text displayed within the BSOD reads as follows:
PAGE_FAULT_IN_NONPAGED_AREA
TECHNICAL INFORMATION:
*** STOP: 0x00000050 (0x87E40000, 0x00000000, 0x92442B13, 0x00000000)
I can not boot past the Windows 7 loading screen - the load bar makes it two fifths up and that's it.
I had thought to try and recover the operating system, if at all possible, from what is apparently a recovery partition that is created on the HD ( i haven't worked with these machines before unfortunately), although i cannot figure how to get at this partition before the error hits.
Also, having attempted to download a piece of software from the HP USB Recovery Flash Disk Utility, i realise that it seems necessary to actually use this from the notebook itself, which is not possible.
Having started running the various onboard tests from the BIOS menu, the Hard Disk Test has just apparently failed (specifically the Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless).HP have not unfortunately been an awful lot of help as they wil only offer a one-off technician support call for forty quid, or to take the notebook away for repair, the cost of which is practically as much as the original cost of the hardware. I would of course prefer to try and sort this out myself but have hit a bit of a wall at the moment. Any suggestions would be fantastic, at this point.
This question was solved.
View Solution.That hardware test for the hard disk is a dead giveaway of a failed item. A failed hard disk is a show stopper.
Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless) It is important information.
A corrupted NTFS volume (the hard disk) can also generate the " PAGE_FAULT_IN_NONPAGED_AREA error" stop message.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
[SOLVED] linux-3.13.6-1 and systemd-210-3 causes black screen
My computer boots into total black screen after recent update, including linux-3.13.6-1, xf86-video-intel-2.99.910-1 and systemd-210-3. I have tried all combinations of rollback, I find linux-3.12.7-2 + systemd-208-2 resolves my problem.
As I dig on, I find it a problem with systemd-backlight. With running kernel-3.13 and systemd-{210,211}, disabling systemd-backlight service either through kernel parameter systemd.restore_state=0 or by masking systemd-backlight service can fix my problem.
Still, I am not the only one experiencing black screen and unresponsive X input with 3.13 kernel: several radeon user seem to have similar phenomenon but cannot be fixed by disabling backlight restore. I would suspect restoring backlight is just one of many ways to trigger this issue, I not experienced in kernel, but I will try to debug the problem. Help will be appreciated.
There seems nothing wrong with X, but a problem with power management.
[ 458.859]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 458.859] X Protocol Version 11, Revision 0
[ 458.859] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 458.859] Current Operating System: Linux goshawk 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 458.859] Kernel command line: root=/dev/sda6 resume=/dev/sda7 ipv6.disable=1 acpi_osi=Linux i915.modeset=1
[ 458.859] Build Date: 09 January 2014 08:47:24AM
[ 458.859]
[ 458.859] Current version of pixman: 0.32.4
[ 458.859] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 458.859] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 458.860] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Mar 13 15:15:34 2014
[ 458.860] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 458.860] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 458.860] (==) No Layout section. Using the first Screen section.
[ 458.860] (==) No screen section available. Using defaults.
[ 458.860] (**) |-->Screen "Default Screen Section" (0)
[ 458.860] (**) | |-->Monitor "<default monitor>"
[ 458.860] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 458.860] (**) | |-->Device "Intel Graphics"
[ 458.860] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 458.860] (==) Automatically adding devices
[ 458.860] (==) Automatically enabling devices
[ 458.860] (==) Automatically adding GPU devices
[ 458.860] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 458.860] Entry deleted from font path.
[ 458.860] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 458.860] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 458.860] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 458.860] (II) Loader magic: 0x804c80
[ 458.860] (II) Module ABI versions:
[ 458.860] X.Org ANSI C Emulation: 0.4
[ 458.861] X.Org Video Driver: 15.0
[ 458.861] X.Org XInput driver : 20.0
[ 458.861] X.Org Server Extension : 8.0
[ 458.861] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 459.667] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 459.669] (--) PCI:*(0:0:2:0) 8086:0046:1025:0365 rev 24, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 459.669] (--) PCI: (0:2:0:0) 1002:68c1:1025:0365 rev 0, Mem @ 0xb0000000/268435456, 0xafee0000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 459.670] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 459.670] Initializing built-in extension Generic Event Extension
[ 459.670] Initializing built-in extension SHAPE
[ 459.670] Initializing built-in extension MIT-SHM
[ 459.670] Initializing built-in extension XInputExtension
[ 459.670] Initializing built-in extension XTEST
[ 459.670] Initializing built-in extension BIG-REQUESTS
[ 459.670] Initializing built-in extension SYNC
[ 459.670] Initializing built-in extension XKEYBOARD
[ 459.670] Initializing built-in extension XC-MISC
[ 459.670] Initializing built-in extension SECURITY
[ 459.670] Initializing built-in extension XINERAMA
[ 459.670] Initializing built-in extension XFIXES
[ 459.670] Initializing built-in extension RENDER
[ 459.670] Initializing built-in extension RANDR
[ 459.670] Initializing built-in extension COMPOSITE
[ 459.670] Initializing built-in extension DAMAGE
[ 459.670] Initializing built-in extension MIT-SCREEN-SAVER
[ 459.670] Initializing built-in extension DOUBLE-BUFFER
[ 459.670] Initializing built-in extension RECORD
[ 459.670] Initializing built-in extension DPMS
[ 459.670] Initializing built-in extension Present
[ 459.670] Initializing built-in extension DRI3
[ 459.670] Initializing built-in extension X-Resource
[ 459.670] Initializing built-in extension XVideo
[ 459.670] Initializing built-in extension XVideo-MotionCompensation
[ 459.670] Initializing built-in extension XFree86-VidModeExtension
[ 459.670] Initializing built-in extension XFree86-DGA
[ 459.670] Initializing built-in extension XFree86-DRI
[ 459.670] Initializing built-in extension DRI2
[ 459.670] (II) "glx" will be loaded by default.
[ 459.670] (II) LoadModule: "dri2"
[ 459.670] (II) Module "dri2" already built-in
[ 459.670] (II) LoadModule: "glamoregl"
[ 459.670] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 459.673] (II) Module glamoregl: vendor="X.Org Foundation"
[ 459.673] compiled for 1.15.0, module version = 0.6.0
[ 459.673] ABI class: X.Org ANSI C Emulation, version 0.4
[ 459.673] (II) LoadModule: "glx"
[ 459.673] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 459.674] (II) Module glx: vendor="X.Org Foundation"
[ 459.674] compiled for 1.15.0, module version = 1.0.0
[ 459.674] ABI class: X.Org Server Extension, version 8.0
[ 459.674] (==) AIGLX enabled
[ 459.674] Loading extension GLX
[ 459.674] (II) LoadModule: "intel"
[ 459.674] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 459.674] (II) Module intel: vendor="X.Org Foundation"
[ 459.674] compiled for 1.15.0, module version = 2.99.910
[ 459.674] Module class: X.Org Video Driver
[ 459.674] ABI class: X.Org Video Driver, version 15.0
[ 459.674] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 459.675] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 459.675] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 459.675] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 459.675] (++) using VT number 1
[ 459.676] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 459.676] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 459.676] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 459.676] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 459.676] (==) intel(0): RGB weight 888
[ 459.676] (==) intel(0): Default visual is TrueColor
[ 459.676] (**) intel(0): Option "AccelMethod" "sna"
[ 459.676] (**) intel(0): Framebuffer tiled
[ 459.676] (**) intel(0): Pixmaps tiled
[ 459.676] (**) intel(0): "Tear free" disabled
[ 459.676] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 459.676] (II) intel(0): Output LVDS1 has no monitor section
[ 459.703] (--) intel(0): found backlight control interface acpi_video1 (type 'firmware')
[ 459.703] (II) intel(0): Output VGA1 has no monitor section
[ 459.703] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 459.703] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 459.703] (==) intel(0): DPI set to (96, 96)
[ 459.703] (II) Loading sub module "dri2"
[ 459.703] (II) LoadModule: "dri2"
[ 459.703] (II) Module "dri2" already built-in
[ 459.703] (==) Depth 24 pixmap format is 32 bpp
[ 459.703] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 459.704] (==) intel(0): Backing store enabled
[ 459.704] (==) intel(0): Silken mouse enabled
[ 459.704] (II) intel(0): HW Cursor enabled
[ 459.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 459.704] (==) intel(0): DPMS enabled
[ 459.704] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 459.704] (II) intel(0): [DRI2] Setup complete
[ 459.704] (II) intel(0): [DRI2] DRI driver: i965
[ 459.704] (II) intel(0): [DRI2] VDPAU driver: i965
[ 459.704] (II) intel(0): direct rendering: DRI2 Enabled
[ 459.704] (==) intel(0): hotplug detection: "enabled"
[ 459.704] (--) RandR disabled
[ 459.712] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 459.712] (II) AIGLX: enabled GLX_ARB_create_context
[ 459.712] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 459.712] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 459.712] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 459.712] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 459.712] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 459.712] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 459.712] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 459.712] (II) AIGLX: Loaded and initialized i965
[ 459.712] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 459.720] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 459.786] (II) intel(0): Setting screen physical size to 361 x 203
[ 459.913] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 459.913] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 459.913] (**) Power Button: Applying InputClass "Acer Keyboard"
[ 459.913] (II) LoadModule: "evdev"
[ 459.913] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 459.913] (II) Module evdev: vendor="X.Org Foundation"
[ 459.913] compiled for 1.15.0, module version = 2.8.2
[ 459.913] Module class: X.Org XInput Driver
[ 459.913] ABI class: X.Org XInput driver, version 20.0
[ 459.913] (II) Using input driver 'evdev' for 'Power Button'
[ 459.913] (**) Power Button: always reports core events
[ 459.913] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 459.913] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 459.913] (--) evdev: Power Button: Found keys
[ 459.913] (II) evdev: Power Button: Configuring as keyboard
[ 459.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 459.913] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 459.913] (**) Option "xkb_rules" "evdev"
[ 459.913] (**) Option "xkb_model" "acer_laptop"
[ 459.913] (**) Option "xkb_layout" "us"
[ 459.936] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 459.936] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 459.936] (**) Video Bus: Applying InputClass "Acer Keyboard"
[ 459.936] (II) Using input driver 'evdev' for 'Video Bus'
[ 459.936] (**) Video Bus: always reports core events
[ 459.936] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 459.936] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 459.936] (--) evdev: Video Bus: Found keys
[ 459.936] (II) evdev: Video Bus: Configuring as keyboard
[ 459.936] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 459.936] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 459.936] (**) Option "xkb_rules" "evdev"
[ 459.936] (**) Option "xkb_model" "acer_laptop"
[ 459.936] (**) Option "xkb_layout" "us"
[ 459.936] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 459.936] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 459.936] (**) Video Bus: Applying InputClass "Acer Keyboard"
[ 459.936] (II) Using input driver 'evdev' for 'Video Bus'
[ 459.936] (**) Video Bus: always reports core events
[ 459.936] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 459.936] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 459.936] (--) evdev: Video Bus: Found keys
[ 459.936] (II) evdev: Video Bus: Configuring as keyboard
[ 459.936] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input3/event3"
[ 459.936] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 459.936] (**) Option "xkb_rules" "evdev"
[ 459.936] (**) Option "xkb_model" "acer_laptop"
[ 459.936] (**) Option "xkb_layout" "us"
[ 459.937] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 459.937] (II) No input driver specified, ignoring this device.
[ 459.937] (II) This device may have been added with another device file.
[ 459.937] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 459.937] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 459.937] (**) Sleep Button: Applying InputClass "Acer Keyboard"
[ 459.937] (II) Using input driver 'evdev' for 'Sleep Button'
[ 459.937] (**) Sleep Button: always reports core events
[ 459.937] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 459.937] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 459.937] (--) evdev: Sleep Button: Found keys
[ 459.937] (II) evdev: Sleep Button: Configuring as keyboard
[ 459.937] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 459.937] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 459.937] (**) Option "xkb_rules" "evdev"
[ 459.937] (**) Option "xkb_model" "acer_laptop"
[ 459.937] (**) Option "xkb_layout" "us"
[ 459.937] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 459.938] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 459.938] (II) No input driver specified, ignoring this device.
[ 459.938] (II) This device may have been added with another device file.
[ 459.938] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 459.938] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 459.938] (II) No input driver specified, ignoring this device.
[ 459.938] (II) This device may have been added with another device file.
[ 459.938] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event12)
[ 459.938] (II) No input driver specified, ignoring this device.
[ 459.938] (II) This device may have been added with another device file.
[ 459.938] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event11)
[ 459.938] (II) No input driver specified, ignoring this device.
[ 459.938] (II) This device may have been added with another device file.
[ 459.939] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:401b (/dev/input/event6)
[ 459.939] (**) Logitech Unifying Device. Wireless PID:401b: Applying InputClass "evdev pointer catchall"
[ 459.939] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:401b'
[ 459.939] (**) Logitech Unifying Device. Wireless PID:401b: always reports core events
[ 459.939] (**) evdev: Logitech Unifying Device. Wireless PID:401b: Device: "/dev/input/event6"
[ 459.939] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Vendor 0x46d Product 0xc52b
[ 459.939] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found 20 mouse buttons
[ 459.939] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found scroll wheel(s)
[ 459.939] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found relative axes
[ 459.939] (--) evdev: Logitech Unifying Device. Wireless PID:401b: Found x and y relative axes
[ 459.939] (II) evdev: Logitech Unifying Device. Wireless PID:401b: Configuring as mouse
[ 459.939] (II) evdev: Logitech Unifying Device. Wireless PID:401b: Adding scrollwheel support
[ 459.939] (**) evdev: Logitech Unifying Device. Wireless PID:401b: YAxisMapping: buttons 4 and 5
[ 459.939] (**) evdev: Logitech Unifying Device. Wireless PID:401b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 459.939] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0003/input/input7/event6"
[ 459.939] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:401b" (type: MOUSE, id 10)
[ 459.939] (II) evdev: Logitech Unifying Device. Wireless PID:401b: initialized for relative axes.
[ 459.939] (**) Logitech Unifying Device. Wireless PID:401b: (accel) keeping acceleration scheme 1
[ 459.939] (**) Logitech Unifying Device. Wireless PID:401b: (accel) acceleration profile 0
[ 459.939] (**) Logitech Unifying Device. Wireless PID:401b: (accel) acceleration factor: 2.000
[ 459.939] (**) Logitech Unifying Device. Wireless PID:401b: (accel) acceleration threshold: 4
[ 459.939] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:401b (/dev/input/mouse0)
[ 459.939] (II) No input driver specified, ignoring this device.
[ 459.939] (II) This device may have been added with another device file.
[ 459.939] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4101 (/dev/input/event7)
[ 459.939] (**) Logitech Unifying Device. Wireless PID:4101: Applying InputClass "evdev pointer catchall"
[ 459.939] (**) Logitech Unifying Device. Wireless PID:4101: Applying InputClass "evdev keyboard catchall"
[ 459.939] (**) Logitech Unifying Device. Wireless PID:4101: Applying InputClass "Acer Keyboard"
[ 459.939] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4101'
[ 459.940] (**) Logitech Unifying Device. Wireless PID:4101: always reports core events
[ 459.940] (**) evdev: Logitech Unifying Device. Wireless PID:4101: Device: "/dev/input/event7"
[ 459.940] (--) evdev: Logitech Unifying Device. Wireless PID:4101: Vendor 0x46d Product 0xc52b
[ 459.940] (--) evdev: Logitech Unifying Device. Wireless PID:4101: Found 20 mouse buttons
[ 459.940] (--) evdev: Logitech Unifying Device. Wireless PID:4101: Found scroll wheel(s)
[ 459.940] (--) evdev: Logitech Unifying Device. Wireless PID:4101: Found relative axes
[ 459.940] (--) evdev: Logitech Unifying Device. Wireless PID:4101: Found x and y relative axes
[ 459.940] (--) evdev: Logitech Unifying Device. Wireless PID:4101: Found absolute axes
[ 459.940] (II) evdev: Logitech Unifying Device. Wireless PID:4101: Forcing absolute x/y axes to exist.
[ 459.940] (--) evdev: Logitech Unifying Device. Wireless PID:4101: Found keys
[ 459.940] (II) evdev: Logitech Unifying Device. Wireless PID:4101: Configuring as mouse
[ 459.940] (II) evdev: Logitech Unifying Device. Wireless PID:4101: Configuring as keyboard
[ 459.940] (II) evdev: Logitech Unifying Device. Wireless PID:4101: Adding scrollwheel support
[ 459.940] (**) evdev: Logitech Unifying Device. Wireless PID:4101: YAxisMapping: buttons 4 and 5
[ 459.940] (**) evdev: Logitech Unifying Device. Wireless PID:4101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 459.940] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0003/input/input8/event7"
[ 459.940] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4101" (type: KEYBOARD, id 11)
[ 459.940] (**) Option "xkb_rules" "evdev"
[ 459.940] (**) Option "xkb_model" "acer_laptop"
[ 459.940] (**) Option "xkb_layout" "us"
[ 459.940] (II) evdev: Logitech Unifying Device. Wireless PID:4101: initialized for relative axes.
[ 459.940] (WW) evdev: Logitech Unifying Device. Wireless PID:4101: ignoring absolute axes.
[ 459.940] (**) Logitech Unifying Device. Wireless PID:4101: (accel) keeping acceleration scheme 1
[ 459.940] (**) Logitech Unifying Device. Wireless PID:4101: (accel) acceleration profile 0
[ 459.940] (**) Logitech Unifying Device. Wireless PID:4101: (accel) acceleration factor: 2.000
[ 459.940] (**) Logitech Unifying Device. Wireless PID:4101: (accel) acceleration threshold: 4
[ 459.940] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4101 (/dev/input/mouse1)
[ 459.940] (II) No input driver specified, ignoring this device.
[ 459.940] (II) This device may have been added with another device file.
[ 459.941] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4003 (/dev/input/event8)
[ 459.941] (**) Logitech Unifying Device. Wireless PID:4003: Applying InputClass "evdev keyboard catchall"
[ 459.941] (**) Logitech Unifying Device. Wireless PID:4003: Applying InputClass "Acer Keyboard"
[ 459.941] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4003'
[ 459.941] (**) Logitech Unifying Device. Wireless PID:4003: always reports core events
[ 459.941] (**) evdev: Logitech Unifying Device. Wireless PID:4003: Device: "/dev/input/event8"
[ 459.941] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Vendor 0x46d Product 0xc52b
[ 459.941] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found 1 mouse buttons
[ 459.941] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found scroll wheel(s)
[ 459.941] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found relative axes
[ 459.941] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing relative x/y axes to exist.
[ 459.941] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found absolute axes
[ 459.941] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing absolute x/y axes to exist.
[ 459.941] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found keys
[ 459.941] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as mouse
[ 459.941] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as keyboard
[ 459.941] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Adding scrollwheel support
[ 459.941] (**) evdev: Logitech Unifying Device. Wireless PID:4003: YAxisMapping: buttons 4 and 5
[ 459.941] (**) evdev: Logitech Unifying Device. Wireless PID:4003: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 459.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0003/input/input9/event8"
[ 459.941] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4003" (type: KEYBOARD, id 12)
[ 459.941] (**) Option "xkb_rules" "evdev"
[ 459.941] (**) Option "xkb_model" "acer_laptop"
[ 459.941] (**) Option "xkb_layout" "us"
[ 459.941] (II) evdev: Logitech Unifying Device. Wireless PID:4003: initialized for relative axes.
[ 459.941] (WW) evdev: Logitech Unifying Device. Wireless PID:4003: ignoring absolute axes.
[ 459.941] (**) Logitech Unifying Device. Wireless PID:4003: (accel) keeping acceleration scheme 1
[ 459.941] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration profile 0
[ 459.941] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration factor: 2.000
[ 459.941] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration threshold: 4
[ 459.941] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event15)
[ 459.941] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 459.941] (**) 1.3M WebCam: Applying InputClass "Acer Keyboard"
[ 459.941] (II) Using input driver 'evdev' for '1.3M WebCam'
[ 459.941] (**) 1.3M WebCam: always reports core events
[ 459.941] (**) evdev: 1.3M WebCam: Device: "/dev/input/event15"
[ 459.941] (--) evdev: 1.3M WebCam: Vendor 0x4f2 Product 0xb1d8
[ 459.941] (--) evdev: 1.3M WebCam: Found keys
[ 459.941] (II) evdev: 1.3M WebCam: Configuring as keyboard
[ 459.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input16/event15"
[ 459.941] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 13)
[ 459.941] (**) Option "xkb_rules" "evdev"
[ 459.941] (**) Option "xkb_model" "acer_laptop"
[ 459.941] (**) Option "xkb_layout" "us"
[ 459.942] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 459.942] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 459.942] (**) AT Translated Set 2 keyboard: Applying InputClass "Acer Keyboard"
[ 459.942] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 459.942] (**) AT Translated Set 2 keyboard: always reports core events
[ 459.942] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[ 459.942] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 459.942] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 459.942] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 459.942] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 459.942] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 459.942] (**) Option "xkb_rules" "evdev"
[ 459.942] (**) Option "xkb_model" "acer_laptop"
[ 459.942] (**) Option "xkb_layout" "us"
[ 459.942] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 459.942] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 459.942] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 459.942] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 459.942] (II) LoadModule: "synaptics"
[ 459.943] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 459.943] (II) Module synaptics: vendor="X.Org Foundation"
[ 459.943] compiled for 1.15.0, module version = 1.7.4
[ 459.943] Module class: X.Org XInput Driver
[ 459.943] ABI class: X.Org XInput driver, version 20.0
[ 459.943] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 459.943] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 459.943] (**) Option "Device" "/dev/input/event14"
[ 460.036] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 460.036] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5822 (res 79)
[ 460.036] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4766 (res 141)
[ 460.036] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 460.036] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 460.036] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 460.036] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 460.037] (**) Option "TapButton1" "1"
[ 460.037] (**) Option "TapButton2" "2"
[ 460.037] (**) Option "TapButton3" "3"
[ 460.037] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 460.037] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 460.090] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event14"
[ 460.090] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 460.090] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 460.090] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 460.090] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 460.090] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 460.090] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 460.090] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 460.090] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 460.090] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 460.090] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 460.090] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 460.090] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 460.090] (II) No input driver specified, ignoring this device.
[ 460.090] (II) This device may have been added with another device file.
[ 464.074] (II) intel(0): EDID vendor "AUO", prod id 12844
[ 464.074] (II) intel(0): Printing DDC gathered Modelines:
[ 464.074] (II) intel(0): Modeline "1366x768"x0.0 69.50 1366 1414 1446 1466 768 771 777 790 -hsync -vsync (47.4 kHz eP)
[ 1616.997] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 1617.370] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
There is no manual setting file for graphics of X, and here is my lspci result:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] (rev ff)
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Redwood HDMI Audio [Radeon HD 5000 Series] (rev ff)
03:00.0 Ethernet controller: Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet (rev c0)
05:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
Last edited by yuanjie.huang (2014-04-02 11:56:21)Hello! I seem to be having a similar problem to what is being discussed here. So I figured I would add what is going on with me.
I will try to keep it short but I apologize in advance for it being a bit long.
Hardware: 2006 Imac with Radeon mobility x1600
For me there was no problem before the systemd upgrade to 210 and the upgrade to 211 did not fix the problem of black screen on boot.
Also I upgraded my kernel from 3.13.5-1 to 3.13.6-1 after the problem with systemd started.
Downgrading systemd to 208.10 ( the kernel had been upgraded already) got the system working properly again.
I have since gone back to 211 and have found that:
If I wait for 5 - 10 minutes after the computer boots when I move the mouse the screen wakes up and I can unlock the screen and the computer works as normal.
Note: I am using gdm and gnome3. I think from this that my problem is a brightness/screen not being turned on issue?
If I add nomodeset to the kernel boot parameters the computer works but the Radeon drivers are not loaded.
and after booting with nomodeset if I use "sudo modprobe radeon modeset=1" my computer screen blacks and I have no response.
With both 210 and 211 I can press ctrl+alt+F2 type my username and password into the blind and give commands like "sudo reboot followed by the password" blindly to the computer and the computer will execute them.
I hope that this can be fixed soon... It is annoying at best.
EDIT
I tried "sudo modprobe radeon modeset=1" again and found that I can press ctrl+alt+F2 and get a terminal login prompt that I can use and see! Although gdm login/gnome is still a black screen...
Last edited by BirdOfPray (2014-03-26 21:42:04) -
Replacement HP Mini 210-2006sa Keyboard in UK
Good day all.
Could someone please advise me where I can buy a new Replacement HP Mini 210-2006sa Keyboard in UK.
Thanks for your time.
Best Regards.You need this:
For use in the United States #622344-001
The laptop was sold in the USA and there is an us keyboard but you are in the UK, am I right?
http://www.com-com.co.uk/hp/partlist/0048274.ihtml
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*
Maybe you are looking for
-
PDF Maker, PDF Filename as database field value
Hi everyone, I am using Word 2010 and Adobe Acrobat X When you are complete a mail merge and specifically the "Merge to Adobe PDF function" - is it possible to specify the filename for the resulting PDF as a value in the database?
-
The Best Tool For Multiple Animated Objects
Hi, I am expirimenting with Flash Web Sites, and I would like suggestions as to a starting point for my project, and I am assuming a Flash website is where I would start. Basically, If I were to open up a web page, I would like to see multiple animat
-
A minor helpful tip - Convertion of TV Tuner audio output from on-board sc to SB Live! 24 bit
Hi guys, Many of you might had known about it but I just would like to share my tiny knowledge here with those who might has the same problem when they upgrade their on-board sc to SB Li've! 24 bit sc. If you have a on-borad sound card, and if you de
-
Problem viewing videos in Safari
I used to use Chrome all the time but have read using Safari could increase my battery's life before its next charge. When using chrome and viewing videos in YouTube and Facebook I had no problems but since I started using Safari it has been saying I
-
Hi, How come system is not allow to change custom duty eventhough GR has been reverse because the field is grey off. But able to change if ONLY IR exist. Thank you.