OSS# 539784 - Exclude SLoc stock from MRP & ATP

Friends,
Has anyone had any success in implementing this note? Please let me know.
Thanks

Excludes only MRP. ATP still functions normal.
Edited by: Jagadish on Aug 12, 2008 10:27 AM

Similar Messages

Exclude QI stocks from MRP

Dear Experts,
We have a change requirement where we want to exclude QI stocks from MRP. That is, exclude QI as available stocks at all areas. There are a lot of existing stocks for a lot of materials already that are in QI. Is there any way we can configure MRP to exclude QI stocks?
Thanks All!

Manoj,
The only kind of stocks that can be excluded by config from being considered by MRP are
Stock in Transfer
Blocked stock
Restricted use stock (batches)
You can select/deselect these in OPPI
Unfortunately, none of these automatically have a 1 to 1 link with QI stock. If you performed a transaction to change your QI stocks to one of the above categories, then it could be excluded from MRP. You also could have some additional options if you are using MRP areas, and all the QI stock is in its own MRP area.
Quality stock can also be excluded from ATP processing, in OVZ9. However, this has no impact on MRP.
It is generally considered unwise to exclude QI stock from MRP processing unless you know the parts will be rejected as unsuitable. Any other inspection results will cause MRP to become unstable over time. Consider the following scenario:
Open PO 100, open SO 100. MRP is balanced.
Receive the PO into QI stock. If this stock were made to be unavailable, then you have 0 stock available, and 100 pc open SO. Next MRP run will determine a shortage, and will generate another purchase req. Someone may actually convert the PR to a PO and submit to a vendor.
Now, the Quality dept completes their inspection, and the QI stock is transferred to unrestricted and available. Now we have 100 pcs stock, 100 pcs open PR or PO, and 100 pc rqment for SO. Next MRP run will determine an overcoverage and will suggest cancellation of the PR/PO.
Rgds,
DB49

How to exclude the stock from MRP in MS04.

Hi SAP ALL,
My client req the stock maintain the for the long term planning purpose under one storage location stock not considered to the MRP. in MS04 T Code.this is issue where did i m setting plz give some detailed explanation
regards
raju

Hi,
In transaction OMIR, choose your plant & then for the storage location you want to exclude from MRP enter 1 (exclude from MRP).
After this setting is maintained, whenever a material is created in this plant & storage location, it will have MRP indicator as "1" in the mrp 4 view .
For materials already in this storage location if the MRP indicator "1" is not maintained in mrp 4 view, please go for a mass change maintenance in the material master & maintain this indicator.
Stock in the excluded storage location will not add up to the stock which is displayed in the top in the md04 screen. This stock will be displayed separately in the bottom of the screen.
Please check same with MS04.
Regards,
R.Brahmankar

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

Need to exclude storage location from MRP.

Hi Gurus,
Is there an option to exclude a specified storage location from MRP at configuration level. But not at material level as in MRP4 view.
We have excluded the stoarge location in config OMIR, however the system considers that stock if the same is not excluded in MRP4 of that material.
Now, the problem is every time i need to go to the material master of every material i have to excude from MRP, which is very time consuming..!
Please advise me is there any option in point of view of Storage Location, just simply define the storage location to be excluded from MRP run.
Thanks in advance.
Naveen.

Dear,
Yes you can do it though OMIR or MMSC 1-Storage location stock excluded from MRP.
Also check this link for more details,
Exclude purchase order on storage location from MRP
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 25, 2009 12:22 PM

Exclude Storae location from MRP

Dear All,
How to exclude a storage location from MRP planning?
What are the steps to be followed?
Please advice
Regards
Edited by: Csaba Szommer on Jun 10, 2011 4:30 PM

In MMSC, for the Matl-Plant-Sloc combination, in the MRP field select option-1 (exclude from MRP)

How to exclude Q-stock out of ATP?

Hi, everyone,
i have one question that is, how to exclude Q-stock ( the stock in quality inspection status) out of ATP (like in T-code md04). Thanks a lot!
Frank

Hi,
If you want the stock to be excluded you should consider posting it to blocked stock instead of QI stock.
The system basicaklly makes the fiollowing assumptions.
If you post something to QI stock, the system assumes that you are simply checking it and the stock is LIKELY to be OK and so it classes QI stock as available.
If you post something into BLOCKED stock, the system assumes that you have discovered a problem with that stock and that it is LIKELY to be written off after checking and so it classes blocked stock as unavailable.
The suggestion to change the availability check is worth looking at, it can do what you are asking, but if you change this it does mean that the assumptions made in the system may be wrong. (not a major problem but not ideal either)
Steve B

Exclude some requirement from MRP

Dear all,
Just out of curiousity,
1 ) in MRP 4 view, is there a field to possible to exlcude dependent requirements in the MRP?
2 ) Is there a way to ONLY excluded the reservation requirement in the MRP?
Thanks.

Hi........
1 ) in MRP 4 view, is there a field to possible to exlcude dependent requirements in the MRP?
Yes. In MRP 4 view there is a field which is MRP dep. requireemnts in this if you define (1) Materials for dependent requirements are not planned.
2 ) Is there a way to ONLY excluded the reservation requirement in the MRP?
Yes. You should explore OMBN.
Regards
Vivek

Exclude special stock (project) from MRP run

Hi,
Would need to exclude special stocks representing project stocks from MRP calculation. Could not seem to find a way to control this via config similar to options available for blocked and in-transit stocks. Is there an option to do this in config? Thanks...

Hi,
You can exclude the stock by creating storage location MRP.
Create separate str location for project stock by MMSC.
In the material master of mrp 4 view, str location indicator - select Exclude str loc from mrp for new ie, project str loc.
Check your Plant & str location by checking Plant/ data view in material master whether you have excluded the correct str location which you have newly created.
When mrp run system exclude this str location.
Regards,
Dharma

Sales Order ATP should exclude the stock of a particular st. loc

Hi,
At Sale order creation, ATP check should exclude a particular Sto Location,
Suppose we have Sto Loc 001, 002, 003, 004 & 005, we want to reserve some stock for the next year, so we identify one storage location say 005 and move some stocks to this storage location. Now when the sales people are creating Sales order, the ATP check should exculde stocks from this Storage Location (the stocks in this sto loc should not be considered in ATP).
But for all other purpose like MRP this should be visible. We want the stock to be in unrestricted area in this Sto Loc.
Request you all to propose a feasible solution either through User exit or some configuration.
Thanks in advace,
Navin

Hi All,
Thanks a lot for all the replies, I found in the storage location table T001L, a field ``DISKZ`` settings called ``Storage location MRP indicator`` the details are as follows Storage location MRP indicator
that you use to exclude storage locations from material requirements planning at plant level.
If you do not set this indicator, stock, requirements, and receipts are included in MRP at plant level.
Use
You can exclude storage locations from MRP at plant level in one of two ways:
By excluding storage location stock from MRP
If storage location stock is excluded from MRP at plant level, no receipts for this storage location will be created in the planning run.
By planning storage location stock separately
If storage location stock is planned separately, the storage location is replenished with goods if the stock falls below the reorder point.
Has any one tried this and does this meets the requirement.
Thanks in advance,
Navin Shinde

Exclude purchase order on storage location from MRP

Hi Everyone,
We have excluded storage location 1200 from MRP.
The result shows only stock on 1200 excluded from MRP, PO on storage location 1200 (storage location 1200 in PO) still considered in MRP.
Is there any way to exclude PO on 1200 i MRP also?
Best Regards,
Bin

Dear,
Go to MRP 4 view of the material master .
In the field SLoc MRP indicator field "1".
If it is for a material than in the material master level it can be done. If you are looking for all materials in that storage location, than it is better to define this in SPRO->Production->MRP-->Planning-->Define Storage Location per MRP plant. Here for that storage location in that plant you need to define "2" - Storage location stock planned seperately or "1" - Exclude Storage location from MRP.
Also u can use t.code MMSC.
Select Material & Plant and Assign MRP =1 for the Sloc to be excluded
Regards,
R.Brahmankar
Edited by: R Brahmankar on Nov 14, 2008 9:32 AM

How MRP Run exclude QI Stock Type of a Raw Material SLOC?

Dear all
Fact:
All of our raw materials must be subject to quarantinee upon GR. We have Storage Location of Raw Material: RMSL
In Material Master of that Raw Material
We are using the "SLOC of EP" (MRP View 2) to put the defaulted GR SLOC. And we also make use of the "Post to QI Stock" in View: Purchasing.
Upon GR:
During GR, the Raw Mat SLOC (RMSL) will be copied from "SLOC of EP" of the material master data, and it will be posted to the stock type "QI STOCK".
Problem:
However, when the MRP Controller run MRP, it will take the QI Stock Type of Raw Material SLOC into account.
Is there anyway we can exclude the QI Stock Type of Raw Material SLOC from MRP Run?
I have read from some threads to suggest to post it to the Quarantinee SLOC. We prefer not to create another Quarantinee SLOC (QISL) which will be filled in SLOC of EP and then after passing QC, we perform Transfer Posting from SLOC: QISL to SLOC: RMSL. We have a few Raw Material SLOCS and we do not want the Warehouse guy to get confused which Raw MAterial SLOC to choose upon GR. Rather, we prefer it to be defaulted in the "SLOC of EP" in the material master.
Please advise.
Edited by: Daimos on Jul 13, 2009 1:16 PM

Hi,
Generally MRP consider stock from all the storage location when run the MRP for Plant level for material.
However we can exclude the particular storage location from MRP Run, for those following settings to be done.
Go to MRP-2 View of material master and select the storage location to be excluded from MRP. (Press Shift +f1 ex .sloc2) As per your case it should be RMSL
In that MRP view go to Storage location MRP Tab.
And assign u201CSLoc MRP indicator = 1 (Storage location stock excluded from MRP)u201Dand save.
Now run the MRP, stock from sloc2 will not be considered to create-planned order.
Please try this and revert back.
Cheers,
Kumar.S

Exclude Reservation stock type from MRP Run

Dear All,
I need to exclude Reserved Stock Type from MRP Planning.
Please guide me with the steps to perform the above.
Just for your information, the reservation is coming from Plant Maintenance module, not Production Planning.
I tried changing the Availability check 02 - PM checking rule to exclude reservation, but it doesnt seem to work. Maybe i did it wrong.
Please help.

Nazrin,
Availability check configuration (OVZ9) has no impact on MRP. MRP relies on its internal rules when it is performing its net requirements calculation. You have very little control over which elements are included/excluded.
You can exclude selected storage locations from MRP planning. Stock and reservations against these storage locations will therefore also be excluded.
You can exclude a material from planning, change the material master MRP type to ND.
Your best bet, though, would be to set your PM planning process up such that these materials never create the reservation in the first place.
Regards,
DB49

Exclude Stock Transfer from MRP Net Requirements

Hi,
Is it possible to exclude the Stock Transfer Orders from the Net Requirements generated by MRP? I want to base the requirements only from historical consumption. In my Stock/requirements list (MD04) for example, the Requisition generated by MRP increases in quantity since there are open Stock Transfers which are to be served by that plant to other plants.
Regards,
Lee

Nazrin,
Availability check configuration (OVZ9) has no impact on MRP. MRP relies on its internal rules when it is performing its net requirements calculation. You have very little control over which elements are included/excluded.
You can exclude selected storage locations from MRP planning. Stock and reservations against these storage locations will therefore also be excluded.
You can exclude a material from planning, change the material master MRP type to ND.
Your best bet, though, would be to set your PM planning process up such that these materials never create the reservation in the first place.
Regards,
DB49

Exclude storage locations from the MRP run

Hi all,
Is it possible to exclude stock of specific storage location from the MRP run?
Thanks for your help
Thomas

Hi,
2 things,
1. In OMIR for the storage location set that this location is excluded from MRP run (if am right the value to be maintained is 1)
2. In MM02 go to MRP-4 view of the material master, specify plant & the storage location which you want to exclude & in the field SLoc MRP indicator specify that this is excluded for MRP run (if am right the indicator is 1).
The step 1 ensures that all materials which are extended to this storage location will by default have the value 1. And step 2 ensures the materials already having this storage location view are excluded from MRP run.
Regards,
Vivek

OSS# 539784 - Exclude SLoc stock from MRP & ATP

Similar Messages

Maybe you are looking for