OSS note 1480794 for the "Steps to Create endpoints using a "Business Conf

Hi All,
I am nearly complete with the Duet Setup Wizzard but I do still have a few red lights on my check tool.
My main problem is:
When I follow the instructions in OSS note 1480794 for the "Steps to Create endpoints using a "Business Configuration Scenario" XML:"
When I press activate I get the below errors:
Unknown webservice definition with name CustomerERPBasicDataByIDQueryResponse_In_V2 / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPRelationshipContactPersonByIDAndContactPersonInternalIDQueryResponse_In / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPBasicDataUpdateRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPRelationshipContactPersonCancelRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPRelationshipContactPersonCreateRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPByIDQueryResponse_In / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPRelationshipContactPersonUpdateRequestConfirmation_In_V1 / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name MaterialBasicDataByIDQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
Unknown webservice definition with name ProductionBillOfMaterialVariantItemByVariantIdentifyingElementsQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
Unknown webservice definition with name ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
I have restarted the Wizzard a few times to check my setup and I cant find any steps that I have missed that would cause these error's.
Hope you can advise.
Many Thanks
Mike

Hi Sameh,
do you want to go live with the full scope of Starter Service , or do you just needs part of it?
With the steps outlined in the blog everything is 100% supported (this is not a hack, but just another way to configure Starter Services).
However, not all the functionality of the Starter Services will work (e.g. like the Updating / Creation of a new contact). But if you do not need that you are perfectly fine.
I remember that with EhP4 you need to be on SP06 of ECC-SE. Maybe this is also the reason in your case why the service is not available.
Regards,
Holger.

Similar Messages

How can I get INSTID_B for the documents which are stored using Store Business Document functionality

Dear experts,
I had activated the functionality of Store Business document and successfully stored documents in external server.
My client have a custom function module which is used to send emails.In that FM they used SO_DOCUMENT_READ_API1, SO_DOCUMENT_SEND_API1 function modules.They passed Instance Ident(SRGBTBREL->INSTID_B)(eg: FOL33000000000004EXT39000000000026) as export parameter to the FM 'SO_DOCUMENT_READ_API1' and get the attachment details and content.
Here my problem is I do not have entries in the table SRGBTBREL for the documents which are stored using the Store Business Document functionality and without INSTID_B I am unable to use the FM 'SO_DOCUMENT_READ_API1' to get the document details and content. Please help me to find INSTID_B for documents which are stored using Store Business Document functionality or please let me know if there is any other way to use FM 'SO_DOCUMENT_READ_API1' for documents which are stored using Store Business Document.
Thanks in advance.
Regards,
Kiran

Hi Kiran,
You can use the following method to get the information. For example if you want to get BO documents for a customer
CALL METHOD cl_binary_relation=>read_links
   EXPORTING
     is_object           = ls_lpor
     it_relation_options = lt_relat
   IMPORTING
     et_links            = lt_links.
then fill ls_por-instid with a customer number (KUNNR), ls_por-typeid = 'KNA1' and ls_por-catid = 'BO'.
Table lt_relat should contain a line option for each document type (for example 'I' 'EQ' 'NOTE', 'I' EQ 'ATTA', 'I' EQ 'URL', ...
In table lt_links you will get your information.
Maybe some other methods of class CL_BINARY_RELATION may also solve your issue.
Regards,
Klaus

Text not visible for the new fields created for Data Source Enhancement

Hi .... I am working on Data Source Enhancements. I created few fields and append then to the Data SourceStructure . I also have populated the fields with data. The problem with a field is that I am not getting the text displayed in RSA3 ..Instead I am getting the field name itself.
Example:
FieldName       DataElement    Datatype length dec           Text
ZZDOCTY                AUART         CHAR      4         0      Sales Document Type
ZZNOODL                ZD_NODL     NUMC      1         0      Number of Deliveries
In the above example the field ZZDOCTY is showing me the description in RSA3 i.e. Sales Document Type whereas the field ZZNOODL is not showing the text. Instead it is directly giving the fieldname ZZNOODL. Is it because of the fact that I created a Data Element for that field ??? and as I did not use the predefined data element as I did for ZZDOCTY???? Please reply me soon.....I need to display the text as "Number of Deliveries" instead of ZZNOODL........I am working on 7.0.....

May be the fields are hidden.
Go to RSA6 select your data source and on the tool bar there will be a pencil butonto change. Click that and at the bottom, you will lots of check boxes.
You go the field that you have enhanced and see whether the HIDE boxes are checked. If so, uncheck them, save and execute RSA3.
Ravi Thothadri

OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0

Hello,
I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
Thanks
Sid

Hi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please assign points if it useful.
Regards
Ravinagh Boni

When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

Greetings anabeqiri,
Thank you for contributing to the Apple Support Communities.
The advice and steps in this article may help if you don't see "None" as a payment option when creating your Apple ID:
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
All the best,
Jeremy

SAP RM: How can I create a Node when the node is not visible for the user

Hi,
Product: SAP records Management for Public Sector
Version: 7.00
is it possible to create a instance node when the model not is not visible for the active user?
I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
Regards and thanks for every beginning
Fanninger Thomas

Hi,
here an example.
When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
Regards
Fanninger Thomas
Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

What r the steps to create task based user interface for interaction center

Hi all,
            Can any one please let me know the steps to create task based user interface for interaction center? It would be great
            if anyone can share document with step by step.
Thanks,
Baasanthi

Hi all,
            Can any one please let me know the steps to create task based user interface for interaction center? It would be great
            if anyone can share document with step by step.
Thanks,
Baasanthi

"You do not have sufficient authority for the step" - Help!

Hi everybody!
I was just sitting, listening to music and suddenly I get this message from iTunes saying:
"iTunes-libraryfile can not be saved. You do not have sufficient authority for the step."
(it's translated from Swedish so it might not be what you with a english version would see)
I am the administrator (even made that sure by using the control userpasswords2 i run) so I have the highest authority (or have I?). I had an other problem before that was that I iTunes wouldn't quit but it turned out to be the antivirus software that mad me a mess (and still does).
I haven't yet updated to 7.02 but I'm running on 7.01. I'm going to update now but you can still give me explanations and solutions to my problem.
Oh yeah the question (if you haven't got it yet),
what should I do so the "You do not have..." doesn't come up and how to sole it (maybe the same thing I don't know :P)?
Antivirussoftware: Norman Antivirus
Many thanks!
Waldemar
Fujitsu Siemens Windows XP Home Swedish version

SPAM

The post-expression for the step 'Set Station Global Models' could not be evaluated.

When running a TestStand sequence, I get the following error message:
The post-expression for the step 'Set Station Global Models' could not be evaluated.
Variable or property types do not match or are not compatible.
Error Code: -17321; Variable or property types do not match or are not compatible.
Although I do understand what the above is telling me, fixing the root cause is somewhat another thing.
I'll explain the scenario. The code is developped in TS4.1.0, although that should be irrelevant.
I inherited a TestStand project which calls LabVIEW modules. The original sequence works fine on the test pc (which is remotely located). The local and remote PC's share the same StationGlobals.ini.
Here is why it is strange.. I do get the error message on the local PC whether I use the old or the new code. I was assuming that using the same StationGlobals.ini would have fixed that, but it didn't.
When I run the old code on the remote PC, I do not get that message, but I do get it with the new code. I don't recall modifying code that affected the StationGlobals. My goal is to fix it on both machines (at least the remote one).
This is the expression that it does not like:
StationGlobals.Models=Locals.Models,
However, that very same expression exists in the original code. The one thing that did change is the addition of a new model number in the Locals.Models.newNumber. I suspect that this contributes to the error. But why does it give me an error when I run the original sequence locally? Maybe I should try running it again..
In either case, any suggestions to overcome the error?
Thanks.
RayR
Solved!
Go to Solution.

Please ignore post.
I found the problem.. There was a mismatch with the number of models. Easy fix. It's all good.
For someone else who might tumble onto this thread for the same reason, here's an explanation.
I added a new model with its variants to the list of Locals.Models. In total, there were 16 additions to the list.
I also added these to the StationGlobals. Which meant that my StationGlobals no longer matched the one on the remote PC.
Where the error came in is that there was one missing model in the StationGlobals, so the size (number of models) did not match that of the Locals.
Slight oversight in the sea of models that are listed (I'm not even going to count them). Now fixed.
... and embarrassed ...
I may as well give myself an "Accepted Solution".
Spoiler (Highlight to read)
Since I've been naughty all year it will be my only Christmas gift..
Since I've been naughty all year it will be my only Christmas gift..

You can creat any open item , you are remember not selecting for the open i

you can creat for any openitem, you are not selecting for the open item in FS00,, your already posting for the entries at the end of the month, you can select for openitem is it possible

Hi,
No.
Aravind Boddupalli

Error while creating Absence as "APP-PAY-51271: The assignment is not eligible for the element

Hi,
"APP-PAY-51271: The assignment is not eligible for the element."

Hi Nandhu,
Can you check below two things which can be cause of this error:
1. The link definition of the non-recurring element which is tagged with this absence type, as a best practice this should be an open link. If the link definition and the assignment eligibility is not matching then you may receive this error.
2. If you have defined an accrual plan for this absence type,then check if the accrual plan recurring element is been tagged to the assignment for which you are receiving this error.
Thanks,
Sanjay

Error while generating CW kin for the new BG created for Taiwan

HiAll,
Please provide your help to resolve this issue,
Iam getting error while generating CW kin for the new BG created for Taiwan, China.
Error : Value TW is not a Valid context for the Descriptive Flexfield Person Developer DF.
Please let me know, is there any step missed to create CW kins for new BG's.
Thanks-
Sowmya.
Edited by: user13419037 on Jul 2, 2012 3:41 AM

Hello ,
Your solution can be solved by enabling the displayed check Box in Location Address DFF
Thanks
Bindu

Error : T161W: Vendor+subcontracting vendor not allowed for 2-step stock tr

Hi Gurus,
When we creating a STO to sub contractor vendor ( in the delivery address tab we are entering the vendor # and activating the SC vendor check box)we are getting the error message as "T161W: Vendor+subcontracting vendor not allowed for 2-step stock transfer".
Message no: MEPO140
Note:
The STO is creating with out error in ECC 5.0 for the above scenario but when i'm trying the same in ECC 6.0 in another system I'm getting this error, Can any one please advice.
Thanks in advance,
Sai

Hi Charlie
I had same issue and we sloved it. but i have one more issue here.
We have created Po and SC Vendor is not check marked. When we go into the change mode of Po i can't see the field at all. but its availalbe in disply mode.
I am using ECC 6.0, Please suggest why this is happening. I need to put check mark for SC vendor.
thanks,
Raju

SFLIGHT is NOT defined for the current logical database.

I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
      carrid LIKE sbook-carrid,
      connid LIKE sbook-connid,
      fldate LIKE sbook-fldate,
      bookid LIKE sbook-bookid,
      order_date LIKE sbook-order_date,
      loccuram LIKE sbook-loccuram,
      END OF sr.
GET sflight.   <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.

Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254.

MiniSAP - SE80 Prompts Error "Printer not suitable for job step..."

Hi all,
I bought an ABAP Objects book. I installed the MiniSAP. When I run SAP GUI and SE80, both with BCUSER and DDIC, it gives me error message "Printer not suitable for job step. Automatic printing not possible."
If I double-click on the message, it does not show the description of the error message, instead it displays an Internet Explorer error message "The page cannot be found."
Furthermore, the same error message, "The Page cannot be found", also appears in the area where the listbox and textbox for selecting Development Class, Program, Function Group, etc. Making these function becomes unavailabale. I cannot see the listbox and textbox in the Object Navigator. The only development class show is "$_TMP_BCUSER" (if I recall correctly). But nothing is in the development class.
How do I solve this problem?
OS: Windows XP Professional
Browser Installed: Internet Explorer and Firefox
Other info: I put incorrect IP Address in the Hosts file while installation was in progress. This created error. I then correct the IP Address in the Hosts file and resume installation. I still encountered error until I restarted my computer and resume installtion. I use IP Address 10.10.0.10.
Thanks in advance.
Regards,
Goh Tiam Tjai

I searched the solution in the other SDN sub forum (ABAP Programming). The following patch solves the problem.
http://www.sap-press.de/download/dateien/473/sapgui_patch.zip
Regards,
Goh Tiam Tjai

OSS note 1480794 for the "Steps to Create endpoints using a "Business Conf

Similar Messages

Maybe you are looking for