Oss note 788172 and 693195

hi to alll
My task is to gemrate reports for ticket analysis fo r the solman server.
for this purpose i am using the standard datasource 0crm_srv_process_h. now i have the problem of extrating the data for the datasource. when isearched the fourm for the same i found the notes 788172 and 693195 will hep
i am looking for the content of these notes
or
reply me with the procedure to do the delta extraction from this datasource
thank u for response
gopu77

Hi Gopu,
Check this note : 793986
hope this will help you.
Thanks,
Vijay.

Similar Messages

HR replication oss note 550055 and 363187

Hi,
I have followed the oss note 550055. I believe that I have to use this note in SRM/EBP system. please confirm.
Next I have to follow the oss note 363187 for the initial load in the HR system.Please confirm.
Please note that I don't use the org. model when I apply the oss note 363187
What is the purpose of the org. model which I have created in the HR system and distributed to SRM/EBP system ?
When will I use this org. model ?
With regards,
Pranav

Hi Pranav,
I will talk about yr last question and not the first two
as we are in process to try this scenario.
The ORG structure replicated in EBP from R/3 HR is used for diff purposes viz.
To decide approvers for pur docs raised by employees of resp depts.
To derive various attributes of employees such as acc system, cost centres, catalogs which can be used, budgets etc.
To assign product catergories (matl groups) to purchasers.
PO value limits
Hope it helps.
BR
Dinesh

OSS Note deimplemented and included in Support Package

Hi,
We have deimplemented note in version 2, because version 3 was not possible to be implemented in SNOTE.
Now it is deimplemented at all, and when I try to implement latest version of the note, I get the message
SAP Note already implemented by Support Package
How can I implement this note now? I checked the objects in the system and the note is not implemented.

Note number 1581093.
As mentioned in the symptom. Version 2 of the note is created to extend the functionality provided in the Version 1. Version 3 of the note is created to correct the error in Version 2.
Information from SPAM
SAP_HR 600 0054 SAPKE60054 Human Resources
How can I find the information required if neeed?
WHen I try to reset the implementation I get the message
No correction instructions implemented for SAP
Note 0001581093
Edited by: Wojciech Walczak ITMAXI.COM on May 25, 2011 12:00 PM

Question about OSS Notes, Archiving and Support Packages

Hello,
does anyone know if all the OOS notes related to archiving programs corrections (category like "performances", "program error", "advance developments",
"legal functions", "corrections of legal functions", "problem", "exit added", "special developments"...) are all automatically appllied on SAP when a support packages is installed?
Thank you
Best regards
Fabio

Looks like the only requirement is Vcenter and Vsphere 4 client. So version 4.0 and up is supported.
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/application_networking_manager/5.1/device_support/table/sdt.html
ANM 5.2 and 5.1 includes a plug-in that allows you to integrate ANM into a VMware virtual data center environment. VMware is a third-party product for creating and managing virtual data centers. Using VMware vSphere Client, you can access ANM functionality and manage the ACE real servers that provide load-balancing services for the virtual machines in your virtual data center.
To use the ANM 5.2/5.1 plug-in, you must use VMware vCenter Server and VMware vSphere Client 4.
For more information about using ANM in a VMware virtual data center environment, see the User Guide for the Cisco Application Networking Manager 5.2/5.1.

TUB 166 and OSS Note 1422655 -- Michigan FUTA

We have applied TUB 166 and would like to get the Michigan taxes straightened out since the changes are retroactive to 1/1/2009. I found OSS note 1422655 and it says 'Before apply the instructions of this note, it is necessary to configure unemploymnet tax type 11 for Michigan state in your tax model'. Does that mean that I need to add a record to table V_T5UTD (Config step 'Maintain Tax Types per Tax Authority') and that is the only thing I need to do? Thanks.

Hi ,
You have to mantain the following config. :
1) Tax Model Tables T5UTE, T5UTM and T5UTY.
2) Also mandatory to maintain V_T5UTD (Maintain Tax Type 11 per Tax Auth - - Michigan in this case) and V_T5UTI (Mantain Tax Type per Tax Company Code per Tax Auth ).
3) Also ensure that tax type 11 is maintained at BSI Tax Factory's end for Michigan
FYI: Tax Type 11 is Employer Debt Repayment Tax
Thanks And Regards,
Somdeb.
Edited by: Sombed on Jan 27, 2010 4:08 PM

Where do i find OSS notes and how to apply them

hi,
i have never applied OSS notes .
so wanted to know where can i find the OSS note(444966)
and what is the procedure to apply it

Hi siddharth,
1. Now its on net.
2. http://service.sap.com/notes
3. This is the site where sap notes can
be found.
4. But,
U will have to contact ur basis team
There u need a user id and a password.
(It might be some common userid and pasword
which ur basis team might be able to provide)
regards,
amit m.

OSS Note - 409979 regarding dates

Hi all,
Did anyone had to apply the OSS Note 409979 and also I saw the process of downloading the note, it asks for setting up the Download manager, is there an easy way to download this or do I have to follow the entire procedure of setting up the Java runtime environment. Please let me know.
Thanks,
Sabrina.

Hi Sabrina,
Though, the instructions can be taken by Download manager, the easiest way is the following.
Suppose you found the note and are in the screen with its description (Text tabstrip).
Click on a 'Correction Instructions' tabstrip (the 4th from the left).
Click on Ref Number at the left of the string (# 0000229616).
Click on a Object Name 'Conversion_Exit_Peri6_Input'.
The new window will show the code of correction instructions, including the piece of code after which you should delete another piece and insert the correcting one.
You can copy-paste instructions. But in your case you need just delete some code from 'Conversion_Exit_Peri6_Input' FM.
Try to force basis guys to get a dev key to implement correction.
Best regards,
Eugene
Message was edited by: Eugene Khusainov
Message was edited by: Eugene Khusainov

OSS note 717123 for SAP_BASIS 7.00

OSS note 717123 and 704307 are exactly what I need. However, our system is SAP_BASIS 7.00. Is there updated notes valid for 7.00? or Would those be still valid?

Hi,
These notes applies to those system with basis release between 46C to 46D and 610 to 640.
As you said system basis release is 7.0, I dont think these notes applies to your system as your system level is much ahead of the affected release.
Rgds
Radhakrishna D S

FI Invoices correction to send via IDoc vs OSS Note 114814

Hi All,
I would like to send Financial Invoice Corrections via IDoc and I am looking for some guidelines and technical explanation on how I should proceed.
I found some explanations in OSS Note 114814 and on other forum threads but I am kind of confused on what I need to do exactly.
I understood that FM EXIT_SAPLF050_008 is involved in the process and also IDoc type FIDCCP01 and FIDCCP02 but I do not know what need to be enhanced in the FM? Does someone have any coding example?
Where exactly is FM EXIT_SAPLF050_008 being called (TCode)? Is it in FB60? I cannot find the enhancement point in this case.
Do I only have to create a project in CMOD and activate it and that's it? I do not know what I need to do in the function module.
Thank you in advance for your guidance. I am a bit lost here to be honest.
Best regards,
Sylvain

first of all u have to find out the user exit.and then if u need to add fields ,then u can write the code here. and then determine the outbound partner profle using tcode WE20. AND then u can u can assign those things in bd64 bussiness model.and if need filters u can set there.
Regards,
Jampani.

Issue with saving SAP& variant for report as per OSS note 1885125

Hi,
I'm implementing OSS note 1885125 and it instructs me to adjust several SAP& variants:
The variants of the report RSUSR070 (SAP&_AUTH, SAP&_CHANGE, SAP&_PROFIL, SAP&_STANDARD,
SAP&_TRANSAKT, SAP&_VALUES)
must be adjusted.
Call transaction SE38 for the report RSUSR070 in the client 000. Change the values for the relevant
variants. On the selection screen, choose "+" ("All Selections" (Ctrl+F7)):
l Select the "All Roles Irrespective of User Assignment" radio button.
For the variant SAP&_BENU, you must select the "With Valid Assignment Of" radio button.
If the variants are protected, run the report RSVARENT for each variant."
Now I'm in client 000 and I can unprotect the variants with report RSVARENT, but then SAP tells me that SAP& is the SAP name space, and that I need to create new variants. So it doesn't let me save these. The whole point of the OSS note requesting the SAP& variants to be adjusted is because they are using in SAP standard transaction codes:
S_BCE_68001418
Roles by Role Name
S_BCE_68001419
Roles by User Assignment
S_BCE_68001420
Roles by Transaction Assignment
S_BCE_68001421
Roles by Profile Assignment
S_BCE_68001422
Roles by Authorization Object
S_BCE_68001423
Roles by Authorization Values
S_BCE_68001424
Roles by Change Data
S_BCE_68001425
Roles by Complex Criteria
S_BIE_59000249
Roles By MiniApp
Any advice how to get round this issue please?
Thank you
Philipp

Ansel,
Thanks again!
In RSA1 ->Transport Connection, yes, I can see the Source System objects.
In the Source System objects, I have selected the ECC source system and dropped it to the right panel.
Now I can a list of Datasource and Transfer Rules there.
1) Does it mean these are all the source system related objects?
I then create the normal transport request to capture all the objects. And release the Transport.
2) Now how can I export this transport?
What I try to do is to delete the existing SAP Source System. Create the new SAP Source System, then import back all the source system related objects...... so that my existing data model will not disappear after deleting and creating the new SAP Source System.
Is the following steps correct?
1) Collect all the Source System related objects and capture in Transport.
2) Release and export the Transport (but how?)
3) Delete the SAP Source System
4) Create new SAP Source System
5) Import the existing SAP Source System related objects (but how?).
Please help, thanks in advance.

OSS Note 1464524

Hello Everyone,
I tried to execute the program of OSS Note 1464524. In the instructions they have written that if you do not have Purchase req. then you can put "=" at selection screen but still this OSS Note is not working that way. I am not able to execute this program.
Waiting for the reply.
Regards,
Khushbu.

Thanks for the reply. Yes you are right the correct OSS note is 100409 and I want to delete the commitment line items without reference to purchase orders or purchase req. So I am trying to execute the program of this OSS note ZKAOIDE0 and in the documentation they have mentioned that if you do not have purchase req then you can put the "=" at the selection screen but the program is not executing.
We are using extended classic scenario.
Thanks,
Khushbu.

OSS NOTE 1127390 GUI_DOWNLOAD

Hello,
We've recently implemented the OSS note 1127390 to replace the obsolete fm WS_DOWNLOAD with GUI_DOWNLOAD but unfortunately we could not implement the OSS notes 1330500 and 1448760 which solves some bugs in the GUI_DOWNLOAD as our support package is SAPKB70015 and the notes package is SAPKB70019.
Is there any other way to install the 2 notes in order to fix the bugs? or we will have to manualy adjust the code?
Thanks,
Andrei

Hi,
you can implement manually the correction but it is not recommended, some other improvements could have be done between SP SAPKB70015 and SAPKB70019. I suggest to check with OSS team (opening an OSS Message) and eventually ask them to extend the validity of the two notes to your SP level.
If you decide to carry on the manual modification check if notes 1330500 and 1448760 have any requirements.
Regards,
Ivan

OSS note 506603 What is it And where can I get it?

Hello,
I am trying to create my form with a SAP Table wizard connection, when I try to use the Table wizard I got the error: "No such interface supported". I can see in a lot of comments the solution is on OSS note 506603. I was trying to find this patch in the sdn site but I could not find it. I am not sure if it is a document, an exe file, a dll,,, and when I see the same question asking where to get the OSS note 506603 there is no answer, could somebody help me telling me what is this and where can I get the patch? I would really appreciate it.
Many thanks.

Hi Eden,
How are you doing ?
OSS note is the older nomenclature for what is now SAP Notes.
They are available at :
http://service.sap.com/notes
you will need a service marketplace user id to log on.
alternatively, if you do not have access to service.marketplace.
send me an email [view my business card], i will reply with the patch. it is a few hundred kb.
with respect,
amit
the note number 506603 :-
Summary
Symptom
Additional information for SAP.Net Connector that was not included in the guide.
Other terms
SAP .NET Connector, Proxy Wizard
Solution
SAP.NET Connector Version 1.0 has been available since Nov 21, 2002. You can download the software from http://service.sap.com/connectors.
Version 2.0 is also available. Use only the new version for new developments.
Report any problems with the SAP.NET Connector under the components:
BC-MID-CON-DNW for problems with the .NET Proxy Wizard for Visual Studio.NET.
BC-MID-CON-DNC for problems with Communication Runtime.
Known problems
1. The Proxy Wizard terminates with the error message "Exception caught in method createFunction for DD_GET_UCLEN Reason: null".
This is caused by a missing function module, which can be installed as described in Note 580834.
2. Corrections for SAP.NET Connector 1.0
The updated version corrects various problems that have been noted during the interim period. You can download it from http://service.sap.com/connectors. To install this version, see the "Release Notes" file. For SAP.NET Connect 1.x, the newest patch-version is called "1.0.3".
3. Corrections for SAP.NET Connector 2.0
For Visual Studio Integration (Design Time) following problems have occurred:
For proxies with several functions, the following runtime error can occur under certain circumstances: "Method xyz can not be reflected." The cause is a combination of an error in the .NET framework and the way in which the proxy generator uses XML-attributes.
The SAP wizard table does not work. Existing tables are not recognized.
Both problems are solved by the patch attached to this note. Stop all instances of Visual Studio and unpack the ZIP file into the "%Program Files%\Microsoft Visual Studio .NET 2003/Common7/IDE" directory, whereby the "SAP.Connector.Design.DLL" file is replaced.
Header Data
Release Status: Released for Customer
Released on: 10.12.2004 16:40:26
Priority: Recommendations/additional info
Category: Installation information
Primary Component: BC-OP-NET-NCO SAP .Net Connector
Secondary Components: BC-OP-NET-VS Visual Studio .Net Connector Wizard
Message was edited by:
amit chawathe

How to apply OSS note and how to use it?--thanks

Hi, morning all,
I want to know how to apply OSS notes and how to use it, pls help me.
Thanks.

Applying OSS note is a critical activity in the system. Usually this task is carried out by the basis, as they maintain the system and the notes, support packs, etc.
A OSS note has potential to impact the system in several ways. So it is better to work with the basis if you need to apply a OSS note to be applied.
Transaction code is Snotes. But pl dont attempt to apply by yourself.
Reg your other question as how to use the OSS note, there is nothing like using aOSS note. Just apply and depending on what the notes do, it may change the config, or download a program or something.
Ravi Thothadri

Use solution manager to create customer message and apply oss notes

Hello All,
Is it possible to use SAP Solution Manager to create/ open Customer Messages and for the application of OSS notes in satellite systems via solution manager?
Currently, our Solution Manager system is bieng used for Central System Monitoring!
Please let me your your expert thoughts!
Thanks,
Antarpreet

Hi,
By using Service Desk scenario of Solution Manager you can convert an issue to an OSS message and follow it up.
Refer the [Link|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Snote application is also integrated with this Service Desk, you can apply SAP notes to any satellite systems.

Oss note 788172 and 693195

Similar Messages

Maybe you are looking for