OSS note Required:Font setup into the IGS

Can someone please help me find the OSS note explaining how to setup the font into the IGS.

Hi,
Check the OSS Note:1011372 whcih might help you...
Thanks,
Nagarjuna

Similar Messages

Embed the specific barcode font directly into the PDF document

Anybody has any info about it ?
embed the specific barcode font directly into the PDF document
Oracle9i Reports Technical FAQ JUL-02 indicated that:
"Oracle9i Reports also provides the functionality of PDF font embedding to
allow you to embed the specific barcode font directly into the PDF document so
the client does not have to have the barcode-font installed in order to view
the document correctly."

See to following posting:
Re: Passing complex XML to session EJB with automatic WSIF mapping
Regards
Sripathy

I'm not receiving any mail into the Junk Mailbox

Hi
I had a problem with the ports of the 2 accounts that I have set up in Mail (one of those is mac.com) due to an excess of space used. I tried several options and it finally it worked. As a result, a week later I realised that I was not receiving any mail into the Junk Mailbox... I don't know if it is related to the orher problem, maybe not.
Essentially I am no longer receiving any junk mail at all - and no mail that is even doubtful (ie from an unknown address). The mails are not showing up even online via MobileMe ... so I have no idea where they are!
Any help would be much appreciated. Thanks.

Yes, I'm the author of the form and I expected the generic notification to be sent to that email but none is coming through. I also see that there is a place on the settings page to enter a custom notification email but that is grayed out unless I upgrade. I just want at least one, generic email to be sent to me so that I can know when a user submits a form.
Here's my screen shots:
http://peteraudenas.com/wp-content/uploads/2013/08/user-account-screen-shot-1.jpg
http://peteraudenas.com/wp-content/uploads/2013/08/user-account-screen-shot-2.jpg
Your Thoughts? Thanks!
Joe

How come F10 does not put my clip into the timeline ?

How come F10 does not put my clip into the timeline ?
When I pressed F10, the sound icon appears instead.
Am I missing out something ?
Thanks

skalicki` wrote:
Technically, to make the function keys work you don't need to change the second box to dash. I don't know why I gave that advice, but it isn't necessary. I guess I said that simply because that's what I have it set to.
The reason there are two boxes is so that you can set Exposé to using both the function keys and the mouse. For example, if I have +All Windows+ set to F9 and Secondary Mouse Button, then it will show all open windows if I click F9 or right-click. That is why you actually don't need to have the second boxes for any of these set to dashes. You could set them to your mouse buttons, or if you wanted you could set the first box of any of these to any function key, as long as it isn't set to the same one as the key you want to use for your shortcuts within FCE.
I hope this made sense, I realize that I might not have explained it very clearly.
Message was edited by: skalicki`
Thanks skalicki, I think I got it. You've been of great help !!

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

HT3576 how do you stop the connect to itunes to use push notifications to stop poping up in my app it will not let me get into the app

how do you stop the connect to itunes to use push notifications to stop poping up in my app it will not let me get into the app

I have had this same issue but thankfully fixed it. Follow he steps below:
Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
Go to Settings > Reset > Erase All Content and Settings
Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
After everything has sync'd back to your phone everything should work fine.
Hope this helps.

How to implement an OSS Note if you only know the key??

Hi,
I wanted to know if we can implement an OSS NOte if we only know the SSCR key.
Any help will be appreciated.

Hi,
You can implement an OSS note through transaction SNOTE.
Just download the OSS note from SNOTE and it will automatically be inserted in the standard code.
If you are not able to download the note check for the note correction given.
Implement the note correction in the standard program after getting access key.
Regards,
Subhashini

The request has not yet been updated into the data targets.

Request successfully loaded into PSA - start further update
Diagnosis
The request has as data target "only PSA". It arrived there successfully.
System Response
The request has not yet been updated into the data targets.
Procedure
You can now trigger the update manually. The final target is determined in the request tables. You do not have to make any further settings.
I am getting this error daily. In RSMO screen status tab option called u201CProcess manuallyu201D, so am doing this manually daily. Is there any solution to fix this problem permanently?
Thanks & Regards,
Praveen Yagnamurthy.

Hi Praveen,
Dont you have Process chains in Production system for loading thid data. If so its better to schedule the PC rather go for manual loading. In Prod system you will not be able to change. You will have the make the changes in the Development Environment & collect these changes in a TR & then move them into Test environment first to make sure it is working fine. And then once it is tested, you can move the TR to Prod sys.
Hope it helps!
Regards,
Pavan

My service provider's SMTP does not require a password but the option "non" does not appear on the IPOD Touch 5th gen. Fix?

I have relay.skynet.be as my outgoing server and it does not require/allow password protection. When configuring mail on the Ipod the option of "non" is not given for the outgoing server. Is this a skynet issue or is there an Ipod solution?

Google for:
setup XX email on iphone
to see if ony of the returned sites help.
XX is you email provider.

Iphone not recognizing photos put into the shared folder

I'm trying to import new photos from a shared folder. I just dragged photos from my main account into the shared folder so other accounts on the same computer can drag them into their own iphoto. I had three sources of the new photos; canon camera, iphone4 and a sony. They are all working fine in my main account but when one of my user accounts tries to drag these iPhoto complains many of the photos are not recognized. After some discovery I found that many of these are "read only" and if I make it read/write it fixed the issue. I can't seem to find a way to use the "info" to change all the files at the same time. I have hundreds of photos I need to do this to.
Is there any other solution to this problem?
Was there a better way to do this from the start to avoid this situation?
This is very frustrating...
Thanks

Is there any other solution to this problem?
Use iPhoto Sharing:
Enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account(s). In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
Regards
TD

Flash 2004 MX will not import .FLA's into the library

I can't imagine why this is- but if someone has some
eperience here- I would be so ever grateful.
I can't get Flash MX 2004 to inport FLA files into the shared
library. When I select inport/into shared library I get an error
message that says flash does not recognize the .fla file type and
wants to know if I should let quick time see if it can recognize
the file. "Use quicktime instead".
Here is what I have tried:
Reset the file types in File/Folder under control panel to
default- Flash- But all file types were already recognzed- -reset
was just a deperation hope and prayer.
Un-installed quicktime then tried to import- no
un-installed flash- reinstalled flash- tried to import- no
Installed newest version of Quicktime and then tried to
import- no
Reverted to a prior system restore point- then
Re-installed Flash - tried to import-no
looked in the registry but could not navigate to anything
that resembled file extensions-
Flash saves FLA's and makes SWF's just as it should- opens
FLA's and sees FLA file types in the saved folder.
When I initialize the import/to library functon FLA file
types are not listed unless I select "all file types" in the file
types drop down- it does recognize SWFs
Flash did recognize FLA's until I played a Quicktime
Instruction CD. With no further action on my part, it quit
importing correctly-
No viruses are found
?? ideas
Thanks
-D
Any other ideas or work-arounds would be greatly
appreciated-

Thanks Shane- but when I need to share a library file- I
select file/ import to library and that is where I get the error- I
was able to share Flash librarys befor I played the quicktime file-
and now- unfortunately FLAs are an unrecognized format. And I am no
longer getting the additional mesage "do you want Quicktime to try
and open them. Just a message that says "one or more files were not
imported because there were errors reading them"
But they open in flash.... which is what I don't understand-
something has happend that flash no-longer sees the fla file type
under the File/ Import to Library.
-D
Yeah, that would have been a ton of effort... Hopefully a
little more clarification in the details...

Can not able to log into the BPM workspace ?

Hi All,
I am using ALBPM 5.7 enterprise server and deployed my project into the enterprise server.
After the deployment when I tried to log into the workspace it is not taking any of the password.
PS: Before deployment I never tried to login to the workspace since I do not have user id for the project.
There are users in the participant wizard and I even tried to reset the password of existing user but it is still not working. I even tried to create a new participant but still it is not taking the password for the same user.
Is it like the new password/participant will get active only after certain time interval say 24 hrs.
But this is not the case of ALBPM 6.0 as far as my knowledge is concern.
Can somebody let me know where I made anything wrong.
If somebody has BPM administration document (Password Reset/Create participant in 5.7), please let me know.
Thanks in advance.
Bibhu
Edited by: Bibhuti Bhusan on Aug 18, 2010 9:57 PM

It sounds like you are trying to log into the workspace with the admin user..... not a participant.
The participants need to be set up in the Process Administrator, (which you will log in via the admin user / pass that was created for the engine).
Here are the 5.7 Documents: [http://download.oracle.com/docs/cd/E13165_01/albsi/docs57/index.html|http://download.oracle.com/docs/cd/E13165_01/albsi/docs57/index.html]
Specifically the 'Process Admin Document' at: [http://download.oracle.com/docs/cd/E13165_01/albsi/docs57/olh_processadministrator/index.html|http://download.oracle.com/docs/cd/E13165_01/albsi/docs57/olh_processadministrator/index.html]
HTH
-Kevin

My IPHONE will not Sync when plugged into the USB port, although the it makes the sound that it is charging, Itunes does not recognize that it is there, what should I do?

I have restarted the computer, the IPHONE 4, I have checked for updates, and Have reinstalled Itunes. The Iphone plugged into the usb makes the noise that its charging but nothing else. It does not sync and ITUNES does not recognize its plugged in.
Please Assist.

See also Recover your iTunes library from your iPod or iOS device.
tt2

My DVD Drive will not accept DVD's into the drive???

I catn even put a disk into the DVD drive... it wont accept it... this all happened after i updated to mountain lion..
any suggestions?? i dont think its a bad DVD drive cuase it was working before the update.
help????

Article from Apple. http://support.apple.com/kb/HT2801
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best

Need a way to find out users who have not all logged in into the portal

Hi all,
Please can some body tell me the way to find out all the users who have not at all logged in into the SAP enterprise portal after their user ID's are created.
Are there any methods(UME APIs) or attributes that set the status of user whether he/she has logged in into the portal first time.
Thanks & Regards,
Hajira Rehman

There used to be a way, but here's what Detlev posted earlier this year:
<b>Hi everyone,
UPDATE on this: From SP16 on, the last successful login date does not get logged into the database anymore, see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/bc6b9202454dece10000000a422035/frameset.htm">here</a> - for performance reasons, as it is stated...
Hope it helps not to fall into this new trap
Detlev</b>
So, there are no simple APIs - you'll need to build your own mechanism.

OSS note Required:Font setup into the IGS

Similar Messages

Maybe you are looking for