OSS note tables

HI,
Can anyone plz tell me the table for OSS note where i get all implemented oss note with date . i want to filter that with date.
Regards
Anukool.

Anukool,
go to snote transaction
click ctrl+f9(sap note browser)
execute
this will give you the data you are looking for.
K.Kiran.

Similar Messages

Details of OSS Note in SAP tables

Hi Experts,
Do we have any standard report or a simple way by which I can get all the contents of a specific OSS note without going into SNOTE transaction. The reason why I am asking is for analysing a large volume of OSS notes. If I need to go through SNOTE and then find the objects it will be tedious. I know the table where in these details are there but I want to know if there is any report handy to use.
Kindly help
Regards,
Vijay V

Hello,
I'm afraid, but there is no such report in SAP using which you'll get the content os any SAP note.
Another option than SNOTE transaction is to use SAP marketpplace to findout the same.
Regards,
Nitin

How to create a Attribute "Type standard table OF" to a OSS NOTE

Dear experts,
I need to add new attributes in a standard class as per one OSS note. I took access key to add new attributes. I have a question.
class name: CL_J_1BEFD
Attribute: MT_GROUP_C350
Level: Instance
Visibility: Private
Type STANDARD TABLE OF mty_result
How do i add the instance attribute because i do not want to give the typing and associated type, instead i have to declare data: MT_GROUP_C350 type standard table of mty_result in class builder private section code.
if you look at the pushbutton between Associated type and Description, for all instance attributes there's a green color lining below the arrow. I want my attribute also to be exactly same.
Though i have access key, in private section the display<->Change button is disabled.
Please suggest me how do i add code in private section of a standard class. i have required access key to change the class.
Thanks,
Alysson

Hi Friend...
Thanks, but the question is...
When I went to transaction se24 or se80, I chose the class CL_J_1BEFD and second I swap to "CHANGE MODE".. after that the pushbutton is blocked... I can create the Attribute mt_group_c800 in the Class (using TYPE or LIKE option), but i can't change the code in the private session even using the assistant to modify it.
When I acess the Button "Detail View" the option "Direct Type Entry" is just unavaliable too, no matter what i do!
I coudn't find a way to create the Attibute like the note Describes (SAPNOTE NUMBER 1575772 - in the attachment of the note)
The changes are contained in the attachment
Follows the instructions retrieved from the file:
Add the following Attributes on the Class CL_J_1BEFD Private section
data:
mt_group_c800 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c850 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c860 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c890 TYPE STANDARD TABLE OF mty_result .
How can i make a way to creat this attributes using "TYPE STANDARD TABLE OF " Option?

How to find out the list of implemented OSS Notes in a particular period.

Hi Friends,
Need help.
I need to find out the list of OSS Notes implemented in a period in a particular system.
Could you please suggest the table or program or any way to find out the OSS Notes Implemented date wise?
Thanks in Advance.
Sreenivas

Hi Sreenivas.
How did you find the solution to this? Trying to do the same thing!
Cheers,
Tom

ABAP dump in ECC 6.0 - Need OSS notes

ABAP dump is coming when retriving data between select-endselect.
Runtime Errors DBIF_RSQL_INVALID_CURSOR
Except. CX_SY_OPEN_SQL_DB
The problem cannot be resolved without correcting the application
program.
The statements MESSAGE, COMMIT WORK, ROLLBACK WORK, CALL SCREEN,
BREAK-POINT, WAIT, CALL FUNCTION ... DESTINATION, CALL FUNCTION ...
STARTING NEW TASK, RECEIVE RESULTS, CALL SELECTION-SCREEN, CALL
DIALOG, CALL TRANSACTION cannot be used within a database
loop.
You can collect the data needed for these statements together in an
internal table and process them
in a loop.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_INVALID_CURSOR" "CX_SY_OPEN_SQL_DB"
Can you please give the OSS notes no. if anything is available.

Hi Sreedevi..
In the dump report, the piece of code where the dump occured will be shown
something with >>>>>> sign in the line...
Please copy and paste this peice of code..
Thanks and Best Regards,
Vikas Bittera.
**Reward if useful**

OSS note 506603 What is it And where can I get it?

Hello,
I am trying to create my form with a SAP Table wizard connection, when I try to use the Table wizard I got the error: "No such interface supported". I can see in a lot of comments the solution is on OSS note 506603. I was trying to find this patch in the sdn site but I could not find it. I am not sure if it is a document, an exe file, a dll,,, and when I see the same question asking where to get the OSS note 506603 there is no answer, could somebody help me telling me what is this and where can I get the patch? I would really appreciate it.
Many thanks.

Hi Eden,
How are you doing ?
OSS note is the older nomenclature for what is now SAP Notes.
They are available at :
http://service.sap.com/notes
you will need a service marketplace user id to log on.
alternatively, if you do not have access to service.marketplace.
send me an email [view my business card], i will reply with the patch. it is a few hundred kb.
with respect,
amit
the note number 506603 :-
Summary
Symptom
Additional information for SAP.Net Connector that was not included in the guide.
Other terms
SAP .NET Connector, Proxy Wizard
Solution
SAP.NET Connector Version 1.0 has been available since Nov 21, 2002. You can download the software from http://service.sap.com/connectors.
Version 2.0 is also available. Use only the new version for new developments.
Report any problems with the SAP.NET Connector under the components:
BC-MID-CON-DNW for problems with the .NET Proxy Wizard for Visual Studio.NET.
BC-MID-CON-DNC for problems with Communication Runtime.
Known problems
1. The Proxy Wizard terminates with the error message "Exception caught in method createFunction for DD_GET_UCLEN Reason: null".
This is caused by a missing function module, which can be installed as described in Note 580834.
2. Corrections for SAP.NET Connector 1.0
The updated version corrects various problems that have been noted during the interim period. You can download it from http://service.sap.com/connectors. To install this version, see the "Release Notes" file. For SAP.NET Connect 1.x, the newest patch-version is called "1.0.3".
3. Corrections for SAP.NET Connector 2.0
For Visual Studio Integration (Design Time) following problems have occurred:
For proxies with several functions, the following runtime error can occur under certain circumstances: "Method xyz can not be reflected." The cause is a combination of an error in the .NET framework and the way in which the proxy generator uses XML-attributes.
The SAP wizard table does not work. Existing tables are not recognized.
Both problems are solved by the patch attached to this note. Stop all instances of Visual Studio and unpack the ZIP file into the "%Program Files%\Microsoft Visual Studio .NET 2003/Common7/IDE" directory, whereby the "SAP.Connector.Design.DLL" file is replaced.
Header Data
Release Status: Released for Customer
Released on: 10.12.2004 16:40:26
Priority: Recommendations/additional info
Category: Installation information
Primary Component: BC-OP-NET-NCO SAP .Net Connector
Secondary Components: BC-OP-NET-VS Visual Studio .Net Connector Wizard
Message was edited by:
amit chawathe

OSS Note for MIGO "Update terminate (SAPSQL_ARRAY_INSERT_DUPREC)"

Dear all
I am facing problem during MIGO GR reference Others, MVT 561.
Upon clicing Button: Save, I face 2 types of errors intermittently
1. Material document is saved and generated but when comes to displayed, it will say "Document 4900496xxx does not exist in calendar year 2009" And I check in Table: MKPF and it does not exist at all
2. I am not able to save it and face this termination error:
The ABAP/4 Open SQL array insert results in duplicate database record
What happened?
Error in ABAP application program.
The current ABAP program "SAPLGLIU" had to be terminated because one
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and adminis
termination messages, especially those beyond their normal deletion"
I have done my investigation and the number range uder FBN1 for this MVT 561 under this Company Code and Year has been maintained.
Can anyone advise me the OSS note to solve it? I cannot find a direct OSS note on it to solve this.
Thanks.
Edited by: Daimos on Oct 26, 2009 7:58 AM

Sorry Jurgen
I have posted so many material documents using MIGO to test it out and try to update my OMBT there so many times until I lost track what is the current number range when I wrote my question here.
I have read that thread you posted regarding the ST22 analysis [Solution from Jurgen|Document does not exist after creation of PO; . I exported them to HTML and did a detail checking, and I find out it is FI GL there did not update the number range properly which in turns cause my GR to have problems.
Below is my analysis and learning to share with others:
1. Ask the ABAPER to find out which record value the system trying to insert. Copy down this number.
2. Check the OMBT value of Current Number.
3. Then use the MFPK Table to search the latest Number Range.
4. Try to check if the record value trying to insert already exists in Current Number. Normally, it will exist and that is why
    system prompt "insert duplication".
5. Then check if the record value trying to insert already exists in MFPK Number. Normally, it will exists it will exist and that is
    why system prompt "insert duplication". (There can be situation that the Current Number is lower than the MFPK Number,
    but it rarely happen).
6. Replace the Current Number to be the Next Number of MKPF largest Number. Save and it should work.
7. If it is not work, please create a material which is non valuated and perform GR, if GR can be done and we can display
    material doc, it means the error is caused by the FI GL number range error.
8. There can be other issues such as activation of user exits and other.
Jurgen, I got one more question to ask you. I have tried to replace the current number with the largest number of MKPF without + 1. It can solve my problem.
But I wonder why SAP Notes and you suggest us to replace Current Number with largest MKPF value PLUS 1?
Please advise.
Thanks.
Edited by: Daimos on Nov 2, 2009 8:41 AM

Problem while implementing OSS note 1077403

Hi,
I am trying to implement a OSS note ( 1077403) using SNOTE transaction. When I download the note, the status of this note is u201CCan be implementedu201D. It creates few standard programs which are utility programs related to Unicode conversion. While implementing this note, I am facing the issue "Objects can only be created in SAP package" and some of the objects in the note are not created. The note status becomes u2018Incompletely Implementedu2019.
Can you please suggest what could be the issue?

HI,
For more efficence direct link to note Note 1077403 - Cluster table check using SDBI_CLUSTER_CHECK
Have you a basis release version >= 6.20 ?
you can use transaction SNOTE to implement the version for Basis Release 6.20 and higher.
Rgds
Edited by: stéphane mouraux on Mar 1, 2010 6:31 PM

Help with OSS Note Quality

Hi, I'm trying to review OSS Notes and I find a lot of notes that I feel don't have enough context to basically understand what the note is about. Basically I feel the Note Quality is poor. I found this one just today. Could someone look at it and let me know if they feel they understand this note or is it just me? Thanks!
[Note 1346134 - 0TCT_DS01 Deletion of statistical data|http://i34.tinypic.com/r0wa4h.png|Note 1346134 - 0TCT_DS01 Deletion of statistical data]

Hi Kenneth,
I'm also there with you. This is something needs to be reported to SAP and they have review this OSS note as the description that they have given is not proper.
There is some more information is missing. They are talking about the deletion of Statistical data from the table: RSDDSTAT_OLAP .... but they did not mentioned about the actual issue for which the correction has been applied..
Onlyway to understand is that correction code that they have which will give some idea but this note needs more information to assist all users......
Me I used to work on serveral notes but I did not come across this kind of note..
Anyway have a nice day...

TUB 166 and OSS Note 1422655 -- Michigan FUTA

We have applied TUB 166 and would like to get the Michigan taxes straightened out since the changes are retroactive to 1/1/2009. I found OSS note 1422655 and it says 'Before apply the instructions of this note, it is necessary to configure unemploymnet tax type 11 for Michigan state in your tax model'. Does that mean that I need to add a record to table V_T5UTD (Config step 'Maintain Tax Types per Tax Authority') and that is the only thing I need to do? Thanks.

Hi ,
You have to mantain the following config. :
1) Tax Model Tables T5UTE, T5UTM and T5UTY.
2) Also mandatory to maintain V_T5UTD (Maintain Tax Type 11 per Tax Auth - - Michigan in this case) and V_T5UTI (Mantain Tax Type per Tax Company Code per Tax Auth ).
3) Also ensure that tax type 11 is maintained at BSI Tax Factory's end for Michigan
FYI: Tax Type 11 is Employer Debt Repayment Tax
Thanks And Regards,
Somdeb.
Edited by: Sombed on Jan 27, 2010 4:08 PM

OSS notes for a Deleted Delivery

Hi Experts,
We have a strange issue. One of the users deleted the deliveries for an order. We now want to delete the Order too. But we are unable to track the order.
Since delivery is deleted, it is not possible to identify the related Sales order number or the materials attached to the delivery.
do we have any OSS note for this ?
Thanks,
Arthy

Dear Lakshmipathi,
Thank you for your valuable suggestion. But we actually are trying to create a shadow table or a backup table to record the deleted delivery details in future. Could you suggest what this table should be like,how and what details should we capture and how the new table should work in order to capture the deleted delivery details?
Please let me knowif you have any possible suggestions for creating this shadow table.
Thanks in Advance,
Regards,
Arthy

SPDD EHP4 Problems with DDIC modifications from OSS Notes

hi,
we made some ddic modifications (addes some fields to sap-tables accoring to oss-notes, also structures with .INCLUDE).
now in SPDD the system wants to create an Append Structure and it is impossible to just use the modifications as done accordingly to the oss notes?
can we accept the append-strucure proposal from spdd or should we throw the modifications away and redo it manually.
best regrards,
oliver

Hello Oliver,
Can you specify where exactly you are facing the problem.
You would have 2 options now :
1- Either to retain your modifications - adopt the modification
2. or overwrite everything by the corrections contained in the new SP - reset to original.
Both the above steps are independent and you can proceed as per your requirement. Absolutely
your and your team's choice.
Just in case you are not very much aware about SPDD or modification adjustments, review following:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/2e/6d66587d9011d396b60000e82de14a/frameset.htm
Best Regards
niraj

OSS note for READ REPORT CX_SY_READ_SRC_LINE_TOO_LONG

Hi Guys
I am sure many of us have faced this problem before while using classical ALV display func modules.
I am pasting the error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CXSY_READ_SRC_LINE_TOO_LONG', was_
not caught in
procedure "KKKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a_
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
There was an attempt to read program "ZU1HAP_IC_REVAL" from the database._
The READ REPORT statement allows you to copy a program text into an
internal table. The occupied line length in the program text must not
exceed the width of the internal table.
The internal table "\FUNCTION=KKKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72_
characters wide. The program line is
84 characters wide.
The Question is , is someone aware of an oss note that take care of this problem? I am looking in the marketplace but havent found something usefull as of now.
Thanks for reading
Rgds
Sameer

If the length of line in the abap code exceeds 72 characters you will get that error.
i could see that in your code a line has 84 characters.
do this,system will automatically format the exceeded lines.
Utitlites ->Settings->ABAP editor ->editor
Check Downwards-comp line length 72.

Help in finding an OSS notes for a SAP Program

Hi,
A runtime error TIME_OUT has occured in the program LSCD2F01.
I need to find an OSS notes which deals with the correction of this dump.I have checked with the latest date of modification of this program and it is 18.02.2006
So the OSS notes which has been generated earlier to this date has been implemented in the program.
I have attached the Dump details below: Any inputs on this will be helpful.
Information on where terminated
The termination occurred in the ABAP program "SAPLSCD1" in "READ_CD_FROM_DB".
 The main program was "SAPMSSY1 ".
 The termination occurred in line 1031 of the source code of the (Include)
 program "LSCD2F01"
 of the source code of program "LSCD2F01" (when calling the editor 10310).
Source Code Extract
1020 FORM read_cd_from_db CHANGING pt_cdhdr TYPE cdhdr_tab
1021 pt_cdpos TYPE cdpos_tab
1022 pt_cdpos_uid TYPE cdpos_uid_tab.
1023
1024 DATA: lt_cdhdr_for_uid TYPE cdhdr_tab
1025 ,lv_guid_true TYPE i.
1026 FIELD-SYMBOLS: <fs_cdhdr> TYPE cdhdr.
1027
1028 CLEAR: lt_cdhdr_for_uid[], lv_guid_true.
1029
1030 * select header from cdhdr
>>>> SELECT * FROM cdhdr INTO TABLE pt_cdhdr
1032 WHERE objectclas IN lt_sl_objectclas
1033 AND objectid IN lt_sl_objectid
1034 AND changenr IN lt_sl_changenr
1035 AND username IN lt_sl_username
1036 AND (
1037 (
1038 udate = date_of_change
1039 AND
1040 utime >= time_of_change
1041 )
1042 OR
1043 udate > date_of_change
1044 )
Regards,
Raj

Check notes:
459838 Performance improvement with very large datasets
and
671283 Performance problem with change documents material master
Rob

OSS Note for Updating the SHE Cess in 4.6 Version - Urgent

Hi,
Good Afternoon!
In Form 26Q, I am not getting Separate column for SHE Cess and under WHTax amount it is adding up all other amounts ( i.e. WHTax Amt + Surcharge Amt + Ecess Amt+ SHE Cess Amt). I am working on 4.6 version.
Can anybody update me what is the OSS note get SHE Cess while printing form 26Q.
Regards
Srinivas

If you are using separate tax codes for Education cess, those tax codes should be maintained in the J_1IEWTECESS table and 'X' should be maintained for the company code in J_1IEWT_ECFLAG table
Refer (only refer) the solution part of the note 870991 and 853918 for details relating to table creation.
1067759 J1INQEFILE - Changes related to Customer TDS
assign points if its useful

OSS note tables

Similar Messages

Maybe you are looking for