OSS Note-version

hi,
i am downloading OSS Note 852990.it is downloaded successfully.But while implementing it gives error-'SAP Note does not contain valid correction instruction'.
But while going to error log,this shows the message-'SAP NOte 852990 in version 0004 downloaded'.
any idea how to correct the error?

Hi,
Check what is the Highest support package applied.Since this is Valid to Support Package    500 - SAPKH50008 .
Go to se37 and check for the code in FUNCTION module BAPI_INB_DELIVERY_CHANGE
IF NOT GS_VBKOK-LIKP_DEL IS INITIAL.                       "v_n_852990
    PERFORM CSL_REORG TABLES TOKENREFERENCE.
ENDIF.                                                                           "^_n_852990
PERFORM ROLLBACK_CHECK.
If this code is present then the Note is applied.
Thanks,
Ahsan
Edited by: Mohammed Ahasanullah Mulla on Apr 11, 2008 8:25 AM

Similar Messages

OSS Note for Updating the SHE Cess in 4.6 Version - Urgent

Hi,
Good Afternoon!
In Form 26Q, I am not getting Separate column for SHE Cess and under WHTax amount it is adding up all other amounts ( i.e. WHTax Amt + Surcharge Amt + Ecess Amt+ SHE Cess Amt). I am working on 4.6 version.
Can anybody update me what is the OSS note get SHE Cess while printing form 26Q.
Regards
Srinivas

If you are using separate tax codes for Education cess, those tax codes should be maintained in the J_1IEWTECESS table and 'X' should be maintained for the company code in J_1IEWT_ECFLAG table
Refer (only refer) the solution part of the note 870991 and 853918 for details relating to table creation.
1067759 J1INQEFILE - Changes related to Customer TDS
assign points if its useful

Extend OSS note 561593 to SAP_APPL version 617.

guys,
Can you advise the fastest way to update a OSS note to new version.
We recently got upgraded to EHP7 and there the note 561593 cannot be implemented.
please advise.

Open the note from here: 561593 - Sender der Nachricht (Fax und/oder E-Mail) ist falsch
open the last correction e.g.1440722
you find there 2 programs, if you click them you see the coding changes.
Now go into your SAP and check the same program in your system and see if those changes are already there. (which I expect for a new release)
If they are included, then there might be another problem.

OSS Note of Older Version ?

Dear All,
Can we download a OSS note which is of older version than the latest version.
i.e. if the latest version is 17 and I want to have the same OSS note of version 5 then can i download the same from SNOTE Transaction ?
Regards,
Deepu.k

Hello Amit,
Do u mean to say, we cannot download the older version for a OSS Note ?

How to find the right OSS Note for my SAP version

Hi All,
There have been issues with the Vendor/Material Master records whenever we run a LSMW by recording process. It is such that all those fields that we have not updated come up with a value as *DELETED* for which i think we should implement a OSS Note to our system.
I am unable to find the right OSS Note Number for this to our SAP system :
SAP_APPL Support Pack: SAPKH50009 Components:Logistics & Accounting.
Request you all to provide me with the correct OSS Note Number so that we can get this issue corrected as this has become very critical.

Hi,
As Jurgen wrote - it could be some programming problem.
But, generally, if you find a SAP Note, that, in your opinion, can solve your SAP problem and it is not intended for your SAP version - simply write to SAP OSS.
If this note really solves your problem, they will extend the validity of this note for your SAP version.
Otherwise, if it is SAP problem, OSS will try to provide solution for it.
I usually act like this - it works.
Hope it helps, not this time, maybe in the future.
Regards,
Wojciech

OSS note 506603 What is it And where can I get it?

Hello,
I am trying to create my form with a SAP Table wizard connection, when I try to use the Table wizard I got the error: "No such interface supported". I can see in a lot of comments the solution is on OSS note 506603. I was trying to find this patch in the sdn site but I could not find it. I am not sure if it is a document, an exe file, a dll,,, and when I see the same question asking where to get the OSS note 506603 there is no answer, could somebody help me telling me what is this and where can I get the patch? I would really appreciate it.
Many thanks.

Hi Eden,
How are you doing ?
OSS note is the older nomenclature for what is now SAP Notes.
They are available at :
http://service.sap.com/notes
you will need a service marketplace user id to log on.
alternatively, if you do not have access to service.marketplace.
send me an email [view my business card], i will reply with the patch. it is a few hundred kb.
with respect,
amit
the note number 506603 :-
Summary
Symptom
Additional information for SAP.Net Connector that was not included in the guide.
Other terms
SAP .NET Connector, Proxy Wizard
Solution
SAP.NET Connector Version 1.0 has been available since Nov 21, 2002. You can download the software from http://service.sap.com/connectors.
Version 2.0 is also available. Use only the new version for new developments.
Report any problems with the SAP.NET Connector under the components:
BC-MID-CON-DNW for problems with the .NET Proxy Wizard for Visual Studio.NET.
BC-MID-CON-DNC for problems with Communication Runtime.
Known problems
1. The Proxy Wizard terminates with the error message "Exception caught in method createFunction for DD_GET_UCLEN Reason: null".
This is caused by a missing function module, which can be installed as described in Note 580834.
2. Corrections for SAP.NET Connector 1.0
The updated version corrects various problems that have been noted during the interim period. You can download it from http://service.sap.com/connectors. To install this version, see the "Release Notes" file. For SAP.NET Connect 1.x, the newest patch-version is called "1.0.3".
3. Corrections for SAP.NET Connector 2.0
For Visual Studio Integration (Design Time) following problems have occurred:
For proxies with several functions, the following runtime error can occur under certain circumstances: "Method xyz can not be reflected." The cause is a combination of an error in the .NET framework and the way in which the proxy generator uses XML-attributes.
The SAP wizard table does not work. Existing tables are not recognized.
Both problems are solved by the patch attached to this note. Stop all instances of Visual Studio and unpack the ZIP file into the "%Program Files%\Microsoft Visual Studio .NET 2003/Common7/IDE" directory, whereby the "SAP.Connector.Design.DLL" file is replaced.
Header Data
Release Status: Released for Customer
Released on: 10.12.2004 16:40:26
Priority: Recommendations/additional info
Category: Installation information
Primary Component: BC-OP-NET-NCO SAP .Net Connector
Secondary Components: BC-OP-NET-VS Visual Studio .Net Connector Wizard
Message was edited by:
amit chawathe

How to check the OSS note in SAP Client system ?

Hi all
I just have a small question ... how do we check whether an OSS note is applied in the SAP client System or not ?
Please let me know..
Thanks
Mallikarjun

Hi
1) One way is checking the version and support pack applied.I.e,
On the main SAP screen > Systems > Status > Check details of the "Component version".
2) STMS > Double click on the system you need to check > Check the status of your request.
Nadini

Problem while implementing OSS note 1077403

Hi,
I am trying to implement a OSS note ( 1077403) using SNOTE transaction. When I download the note, the status of this note is u201CCan be implementedu201D. It creates few standard programs which are utility programs related to Unicode conversion. While implementing this note, I am facing the issue "Objects can only be created in SAP package" and some of the objects in the note are not created. The note status becomes u2018Incompletely Implementedu2019.
Can you please suggest what could be the issue?

HI,
For more efficence direct link to note Note 1077403 - Cluster table check using SDBI_CLUSTER_CHECK
Have you a basis release version >= 6.20 ?
you can use transaction SNOTE to implement the version for Basis Release 6.20 and higher.
Rgds
Edited by: stéphane mouraux on Mar 1, 2010 6:31 PM

Oss-old version + new update causes MAJOR problems....................

hey all...
if ur experiencing quitting apps, probs w/ itunes7, etc, and u have oss (ANY version), get rid of it immediately.........
the new updated version is even worse than the original.....
goto the uninstaller or delete it with appzapper (if u can get it to stay open...)
gl...............

I have done that, several times.
So this is where I'm at now - last night, immediately after finishing a movie that was on my WD hard drive, which holds all of my media, music, movies - I restarted my computer and then it would not read the drive. It said it was unreadable.
I brought the Mac and the drive into an apple store today - they said basically it was my hard drive causing the issues. I used my iPod classic as my media back up as the 160 gb could hold all my stuff. Well, as I mentioned previously, that can't sync and I restored it, with no success. So in essence I lost my media drive and the back up. Tough to swallow, I'm angry, I think it's still mountain lion causing the drive to fail.
So I resolved to go home and restore my computer to one of my time machine back ups and do a Snow Leopard reinstall. Well, the moment I returned from the apple store, the time machine drive is now listed as unreadable. I called support, spent hours with them - I now have two drives which fried within 10 hours of each other in the same error. The senior support manager agreed it sounds like mountain lion is indeed corrupting my drives somehow. My iMac currently won't start into the recovery disk. So I went out spent $200 to get a new hard drive, which I am now backing up my data onto with a new Time machine.
In the last week, I've lost my iPod classic, iPhone 4, two external hard drives and now possibly even the Mac itself. I'm going to install snow leopard and see if it alleviates any of my issues, or hopefully can read my drives. I truly believe Mountain Lion is the problem.

OSS note 550071 - price for catalog product

Hello All,
the sub OSS note says
If a valid source is assigned to the shopping basket item (for example, an info record or a contract), the price is transferred to the purchase order from the source of supply<b> - unless, the item is created via a catalog and it contains the catalog price.</b>
we require that the ECC cotract price should be picked up while classic PO creation , even though the product is picked up from catalog (which has contract no in the product characteristics).
Now only in one test case we observed that system behaved in our desired way and contradictory to the note.
Does anyone know about any control on this behaviour?
we could not find any.
(we have not implemented BBP_APPEND_ITEM)
BR
Dinesh

Hi
Which SRM version are you using ? What you observed in your test-case ?
<b>Anyways, You can do this easily using any of the BADIs</b>
- BBP_DOC_CHANGE_BADI
- BBP_SOS_BADI
P.S. : Read the relevant standard SAP documenatation in SE18 Transaction.
Do let me know.
Regards
- Atul

OSS Note in SAP

Hi GURU's,
What is OSS Note in SAP. I do not know about this. But so many times in Sdn some GURU's will suggest go to OSS note which help you. How to get authorisation to enter into OSS Note. Any membership. I am working in some company. Can you provide me the detailes?
Thanks inadvance,
Yogesh

Hi
On-line Support System is a service that SAP offers to their customers in order to manage situation in which you have to involve SAP in order to find a solution to your problem...if there are some errors in the std program, SAP can provide a note that contains the instructions to solve the issue..but notes are related also to FAQ, performance issues, consulting....
you can search for a note by www.service.sap.com/notes or from your system with the transaction OSS1..
Time to time SAP releases solutions of our (SAP) product as in form of notes. So it is just explanation of problem in SAP. You can use as a details of soln of your problem.
OSS Note are nothing but correction/enhancement codes for a bug or error. When SAP releases a product it may have some bugs which are discovered later. Hence SAP releases the correction code as a OSS Note.
We raise OSS notes when we are not able to resolve some of the issues or say some standard functionality/feature is not working out in BW and we ask help from SAP to resolve those. In turn, SAP comes back with a solution documented as an OSS note.
You can logon into http://service.sap.com/notes
OSS note is a document provided by SAP that described particular issue, usually with symptom, cause(the reason), solution provided, and some other info (correction instruction and code).
OSS note has version, date issued, and categorized to application area (e.g BW, CRM, etc).
Check my thread below.. it will definately solve your issue..
Where to find SAP note?
Regards
Swati

OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0

Hello,
I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
Thanks
Sid

Hi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please assign points if it useful.
Regards
Ravinagh Boni

Help needed applying OSS note 981295 in SAP ECC 5.0 with SAP Kernel 640_REL

Hi Experts,
Our functional team is trying to implement a kind of workflow through a notification via SAP Inbox (transaction code SBWP) after the release of a Purchase Order (Transaction code ME29), this is every time when a purchase order is released through transaction code ME29, a notification will be sent to the SAP Inbox (transaction code SBWP). So according to this they told me to implement OSS note 981295, but using transaction SNOTE I get the message that this note can't be implemented in my system this because my SAP Kernel version is the release 6.40 and the needed SAP Kernel for this note is from version 7.00 to version 7.10. So what do you recommend please in this case in order to implement the required functionality on our SAP ECC 5.0 System?
Best Regards,
Erik Espinosa

Note clearly states
This note is only relevant if the following Support Package is installed in the system:
NW04s: Support Package SAPKB70008
Meaning is not relevat to your case. You need to keep looking... if you open an OSS message people from SAP might put you in the right direction.
Regards
Juan

OSS Note No required.

Hi all,,
The version of the SAP system is 4.6 C.
I got a standard SAP program in V.02 transaction showing ABAP runtime error TIME_OUT.
The function module is "RV_MISSING_DOCUMENT_DATA".
The program is "SAPLV05M " or "LV05MU01 "
The Dump is "TIME_OUT".
But the version is 4.6 C
Am able to find OSS Notes for less than 4.6C. But not for 4.6C.
PLs anyone can find the appropriate OSS Note for this, which will solve the error.
will be rewarded.
Thanks in adv.

Hi,
Check the note 156355.
Reward points if useful.
Thanks & Regards,
Vasudeva Rao.

OSS note for batch field in LT12 (Program:SAPML03T; screen: 1141)

Hi guys,
before ECC 6, batch field in LT12 has search help. In ECC 6, batch field has no more search help.
Is there an OSS note for the batch field in LT12 to have search help again/
Thanks!

check if it was custom search help in earlier version, which will be required to be created again after upgrade. nor worked on LT12 but we had to do it for many transactions in last upgrade.

OSS Note-version

Similar Messages

Maybe you are looking for