OSS Notes -- do or do not
Hello colleagues,
I have to implement some OSS notes here as required. Some of these notes have the status "Can be implemented" and some others the status "Cannot be implemented".
I have already implemented the first group, although the status does not change from "In Processing" since a long while. Is this normal ???
For the other group ("Cannot be implemented"), is it something that we must do manually per coding ?? what can you recommend ??
Thanks a lot.
the status "In Processing" will stay there unless you set them to completed. SNOTE needs some human to verify the note fixed whatever issue it was expected to.
For the "cannot be implemented" you need to check for more details on why it's cannot be implemented. Sometimes it's because some of your custom code has already change standard SAP code, etc. If that's the case, you may need to reset to SAP original, or you can apply the change manually.
So the short answer is it depends.
Similar Messages
-
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10". -
I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots. -
In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks
If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone? -
If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.
OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?
-
My Iphone 5 voice speaker is not working.I'm not able to hear the voice of the person calling.But when I put my iphone 5 on speaker mode, things seem ok.Please provide me some suggestions.
Hello rizvijunaid,
Thank you for providing the details of the issue you are experiencing with calls on your iPhone. I recommend following the steps in the article below for the issue you described:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Is not abstract and does not override abstract method actionPerformed
I dont how to corr. Please help!! and thank you very much!!
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class test extends JFrame implements ActionListener, ItemListener
private CenterPanel centerPanel;
private QuestionPanel questionPanel;
private ButtonPanel buttonPanel;
private ResponsePanel responsePanel;
private JButton b1,b2,b3,b4,b5; //Create five references to Jbutton instances
private JTextField t1,t2,t3,t4,t5; //Create five references to JTextField instances
private JLabel label1; //Create one references to JLabel instances
private JRadioButton q1,q2,q3; //Create three references to JRadioButton instances
private ButtonGroup radioGroup; //Create one references to Button Group instances
private int que1[] = new int[5]; //Create int[4] Array
private int que2[] = new int[5];
private int que3[] = new int[5];
private String temp1, temp2, temp3, temp4, temp5, temp6, temp7, temp8, temp9, temp10,
temp11, temp12, temp13, temp14, temp15;
public test (String header)
super(header);
Container container = getContentPane();
label1 = new JLabel ("PLease click on your response to ");
q1 = new JRadioButton("I understand most of the content of this subject",true);
add(q1);
q2 = new JRadioButton("I see the relevance of the subject to my degree",false);
add(q2);
q3 = new JRadioButton("The workload in this subject is appropriate",false);
add(q3);
radioGroup = new ButtonGroup(); //JRadioButton belong to ButtonGroup
radioGroup.add(q1);
radioGroup.add(q2);
radioGroup.add(q3);
JPanel buttonPanel = new JPanel();
JPanel responsePanel = new JPanel();
JPanel questionPanel = new JPanel();
JPanel centerPanel = new JPanel();
b1 = new JButton ("Strongly DISAGREE"); //Instantiate JButton with text
b1.addActionListener (this); //Register JButtons to receive events
b2 = new JButton ("DISAGREE");
b2.addActionListener (this);
b3 = new JButton ("Neither AGREE or DISAGREE");
b3.addActionListener (this);
b4 = new JButton ("AGREE");
b4.addActionListener (this);
b5 = new JButton ("Strongly AGREE");
b5.addActionListener (this);
buttonPanel.setLayout(new GridLayout(5,1));
buttonPanel.add(b1);
buttonPanel.add(b2);
buttonPanel.add(b3);
buttonPanel.add(b4);
buttonPanel.add(b5);
t1 = new JTextField ("0",3); //JTextField contains empty string
t2 = new JTextField ("0",3);
t3 = new JTextField ("0",3);
t4 = new JTextField ("0",3);
t5 = new JTextField ("0",3);
t1.setEditable( false );
t2.setEditable( false );
t3.setEditable( false );
t4.setEditable( false );
t5.setEditable( false );
responsePanel.setLayout(new GridLayout(5,1));
responsePanel.add(t1);
responsePanel.add(t2);
responsePanel.add(t3);
responsePanel.add(t4);
responsePanel.add(t5);
questionPanel.setLayout(new GridLayout(4,1));
questionPanel.add(label1);
questionPanel.add(q1);
questionPanel.add(q2);
questionPanel.add(q3);
centerPanel.add(buttonPanel,BorderLayout.CENTER);
centerPanel.add(responsePanel,BorderLayout.EAST);
container.add(centerPanel,BorderLayout.WEST);
container.add(questionPanel,BorderLayout.NORTH);
q1.addActionListener(
new ActionListener(){
public void actionPerformed( ActionEvent e )
{ //actionPerformed of all registered listeners
if (e.getSource() == b1) {
que1[0] = Integer.parseInt(t1.getText()) + 1;
String temp1 = String.valueOf(que1[0]);
t1.setText(temp1);
else if (e.getSource() == b2) {
que1[1] = Integer.parseInt(t2.getText()) + 1;
String temp2 = String.valueOf(que1[1]);
t2.setText(temp2);
else if (e.getSource() == b3) {
que1[2] = Integer.parseInt(t3.getText()) + 1;
String temp3 = String.valueOf(que1[2]);
t3.setText(temp3);
else if (e.getSource() == b4) {
que1[3] = Integer.parseInt(t4.getText()) + 1;
String temp4 = String.valueOf(que1[3]);
t4.setText(temp4);
else if (e.getSource() == b5) {
que1[4] = Integer.parseInt(t5.getText()) + 1;
String temp5 = String.valueOf(que1[4]);
t5.setText(temp5);
} //end action performed
q2.addActionListener(
new ActionListener(){
public void actionPerformed( ActionEvent e )
{ //actionPerformed of all registered listeners
if (e.getSource() == b1) {
que2[0] = Integer.parseInt(t1.getText()) + 1;
String temp6 = String.valueOf(que2[0]);
t1.setText(temp1);
else if (e.getSource() == b2) {
que2[1] = Integer.parseInt(t2.getText()) + 1;
String temp7 = String.valueOf(que2[1]);
t2.setText(temp7);
else if (e.getSource() == b3) {
que2[2] = Integer.parseInt(t3.getText()) + 1;
String temp8 = String.valueOf(que2[2]);
t3.setText(temp8);
else if (e.getSource() == b4) {
que2[3] = Integer.parseInt(t4.getText()) + 1;
String temp9 = String.valueOf(que2[3]);
t4.setText(temp9);
else if (e.getSource() == b5) {
que2[4] = Integer.parseInt(t5.getText()) + 1;
String temp10 = String.valueOf(que2[4]);
t5.setText(temp10);
} //end action performed
q3.addActionListener(
new ActionListener(){
public void actionPerformed( ActionEvent e )
{ //actionPerformed of all registered listeners
if (e.getSource() == b1) {
que3[0] = Integer.parseInt(t1.getText()) + 1;
String temp11 = String.valueOf(que3[0]);
t1.setText(temp11);
else if (e.getSource() == b2) {
que3[1] = Integer.parseInt(t2.getText()) + 1;
String temp12 = String.valueOf(que3[1]);
t2.setText(temp12);
else if (e.getSource() == b3) {
que3[2] = Integer.parseInt(t3.getText()) + 1;
String temp13 = String.valueOf(que3[2]);
t3.setText(temp13);
else if (e.getSource() == b4) {
que3[3] = Integer.parseInt(t4.getText()) + 1;
String temp14 = String.valueOf(que3[3]);
t4.setText(temp14);
else if (e.getSource() == b5) {
que3[4] = Integer.parseInt(t5.getText()) + 1;
String temp15 = String.valueOf(que3[4]);
t5.setText(temp15);
} //end action performed
}//end constructor test
public void itemStateChanged(ItemEvent item) {
//int state = item.getStateChange();
//if (q1 == item.SELECTED)
public class ButtonPanel extends JPanel
public ButtonPanel()
public class CenterPanel extends JPanel
public CenterPanel()
public class QuestionPanel extends JPanel
public QuestionPanel()
public class ResponsePanel extends JPanel
public ResponsePanel()
public static void main(String [] args)
test surveyFrame = new test("Student Survey") ;
surveyFrame.setSize( 500,300 );
surveyFrame.setVisible(true);
surveyFrame.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
}//end main
}//end class testis not abstract and does not override abstract method actionPerformed
Oh, I see that the title of your post is an error message? Ok. Well, the test class is declared as implementing an ActionListener. That means the test class must have an actionPerformed() method. Your test class apparently does not.
It does not appear that the test class needs to implement ActionListener. You are using annonymous classes as listeners. -
Is not abstract and does not override abstract method tablechanged
I will remove all the gui code to make it shorter, but my problem lies with my InteractiveTableModelListener.
public class Meet extends JPanel{
private static void createAndShowGUI() {
JFrame frame = new JFrame("MEET_dataTable");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.add(new Meet(), BorderLayout.CENTER);
frame.pack();
frame.setVisible(true);
public class InteractiveTableModelListener implements TableModelListener {
public void TableChanged(TableModelEvent evt) {
if (evt.getType() == TableModelEvent.UPDATE) {
int column = evt.getColumn();
int row = evt.getFirstRow();
dataTable.setColumnSelectionInterval(column + 1, column + 1);
dataTable.setRowSelectionInterval(row, row);
class InteractiveRenderer extends DefaultTableCellRenderer {
protected int interactiveColumn;
public InteractiveRenderer(int interactiveColumn) {
this.interactiveColumn = interactiveColumn;
public Component getTableCellRendererComponent(JTable dataTable,
Object value, boolean isSelected, boolean hasFocus, int row,
int column)
Component c = super.getTableCellRendererComponent(dataTable, value, isSelected, hasFocus, row, column);
if (column == interactiveColumn && hasFocus) {
if ((Meet.this.tableModel.getRowCount() - 1) == row &&
!Meet.this.tableModel.hasEmptyRow())
Meet.this.tableModel.addEmptyRow();
highlightLastRow(row);
return c;
public void highlightLastRow(int row) {
int lastrow = tableModel.getRowCount();
if (row == lastrow - 1) {
dataTable.setRowSelectionInterval(lastrow - 1, lastrow - 1);
else {
dataTable.setRowSelectionInterval(row + 1, row + 1);
dataTable.setColumnSelectionInterval(0, 0);
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
UIManager.put("swing.boldMetal", Boolean.FALSE);
createAndShowGUI();
}As i say, i have removed all the gui code to make it shorter, but in this code i create the table and add all the model to it. I am being returned with the error
Meet.InteractiveTableModelListener is not abstract and does not override abstract method tableChanged(javax.swing.event.TableModelEvent)in javax.swing.event.TableModelListener
what would be causing this error?
CheersSorry, just figured out my silly error, the method is tableChanged not TableChanged.
cheers
TOPIC CLOSED
Edited by: nick2price on Sep 11, 2008 7:08 AM -
Is not abstract and does not override abstract method ERROR
Hello. I'm new at all this, and am attempting to recreate a sample code out of my book (Teach Yourself XML in 24 Hours), and I keep getting an error. I appriciate any help.
This is the Error that I get:
DocumentPrinter is not abstract and does not override abstract method skippedEntity(java.lang.String) in org.xml.sax.ContentHandler
public class DocumentPrinter implements ContentHandler, ErrorHandler
^This is the sourcecode:
import org.xml.sax.Attributes;
import org.xml.sax.ContentHandler;
import org.xml.sax.ErrorHandler;
import org.xml.sax.Locator;
import org.xml.sax.SAXParseException;
import org.xml.sax.XMLReader;
public class DocumentPrinter implements ContentHandler, ErrorHandler
// A Constant containing the name of the SAX parser to use.
private static final String PARSER_NAME = "org.apache.xerces.parsers.SAXParser";
public static void main(String[] args)
// Check to see whether the user supplied any command line arguments. If not, print an error and exit.
if (args.length == 0)
System.out.println("No XML document path specified.");
System.exit(1);
// Create a new instance of the DocumentPrinter class.
DocumentPrinter dp = new DocumentPrinter();
try
// Create a new instance of the XML Parser.
XMLReader parser = (XMLReader)Class.forName(PARSER_NAME).newInstance();
// Set the parser's content handler
// parser.setContentHandler(dp);
// Set the parsers error handler
parser.setErrorHandler(dp);
// Parse the file named in the argument
parser.parse(args[0]);
catch (Exception ex)
System.out.println(ex.getMessage());
ex.printStackTrace();
public void characters(char[] ch, int start, int length)
String chars ="";
for (int i = start; i < start + length; i++)
chars = chars + ch;
System.out.println("Recieved characters: " + chars);
public void startDocument()
System.out.println("Start Document.");
public void endDocument()
System.out.println("End of Document.");
public void startElement(String namespaceURI, String localName, String qName, Attributes atts)
System.out.println("Start element: " + localName);
for (int i = 0; i < atts.getLength(); i++)
System.out.println(" Attribute: " + atts.getLocalName(i));
System.out.println(" Value: " + atts.getValue(i));
public void endElement(String namespaceURI, String localName, String qName)
System.out.println("End of element: " + localName);
public void startPrefixMapping(String prefix, String uri)
System.out.println("Prefix mapping: " + prefix);
System.out.println("URI: " + uri);
public void endPrefixMapping(String prefix)
System.out.println("End of prefix mapping: " + prefix);
public void ignorableWhitespace(char[] ch, int start, int length)
System.out.println("Recieved whitespace.");
public void processingInstruction(String target, String data)
System.out.println("Recieved processing instruction:");
System.out.println("Target: " + target);
System.out.println("Data: " + data);
public void setDocumentLocation(Locator locator)
// Nada
public void error(SAXParseException exception)
System.out.println("Parsing error on line " + exception.getLineNumber());
public void fatalError(SAXParseException exception)
System.out.println("Fatal parsing error on line " + exception.getLineNumber());
public void warning(SAXParseException exception)
System.out.println("Warning on line " + exception.getLineNumber());Check to make sure that the arguments are consistent with your ContentHandler class. Probably the wrong type.
I think you forgot to include the skippedEntity method, it seems to be missing. Even if an implemented class has a method that you are not using, you still have to include the method in your code even if it doesn't do anything.
Message was edited by:
ChargersTule1 -
...is not abstract and does not override abstract method compare
Why am I getting the above compile error when I am very clearly overriding abstract method compare (ditto abstract method compareTo)? Here is my code -- which was presented 1.5 code and I'm trying to retrofit to 1.4 -- followed by the complete compile time error. Thanks in advance for your help (even though I'm sure this is an easy question for you experts):
import java.util.*;
This program sorts a set of item by comparing
their descriptions.
public class TreeSetTest
public static void main(String[] args)
SortedSet parts = new TreeSet();
parts.add(new Item("Toaster", 1234));
parts.add(new Item("Widget", 4562));
parts.add(new Item("Modem", 9912));
System.out.println(parts);
SortedSet sortByDescription = new TreeSet(new
Comparator()
public int compare(Item a, Item b) // LINE CAUSING THE ERROR
String descrA = a.getDescription();
String descrB = b.getDescription();
return descrA.compareTo(descrB);
sortByDescription.addAll(parts);
System.out.println(sortByDescription);
An item with a description and a part number.
class Item implements Comparable
Constructs an item.
@param aDescription the item's description
@param aPartNumber the item's part number
public Item(String aDescription, int aPartNumber)
description = aDescription;
partNumber = aPartNumber;
Gets the description of this item.
@return the description
public String getDescription()
return description;
public String toString()
return "[descripion=" + description
+ ", partNumber=" + partNumber + "]";
public boolean equals(Object otherObject)
if (this == otherObject) return true;
if (otherObject == null) return false;
if (getClass() != otherObject.getClass()) return false;
Item other = (Item) otherObject;
return description.equals(other.description)
&& partNumber == other.partNumber;
public int hashCode()
return 13 * description.hashCode() + 17 * partNumber;
public int compareTo(Item other) // OTHER LINE CAUSING THE ERROR
return partNumber - other.partNumber;
private String description;
private int partNumber;
}Compiler error:
TreeSetTest.java:25: <anonymous TreeSetTest$1> is not abstract and does not over
ride abstract method compare(java.lang.Object,java.lang.Object) in java.util.Com
parator
public int compare(Item a, Item b)
^
TreeSetTest.java:41: Item is not abstract and does not override abstract method
compareTo(java.lang.Object) in java.lang.Comparable
class Item implements Comparable
^
2 errorsAccording to the book I'm reading, if you merely take
out the generic from the code, it should compile and
run in v1.4 (assuming, of course, that the class
exists in 1.4). I don't know what book you are reading but that's certainly incorrect or incomplete at least. I've manually retrofitted code to 1.4, and you'll be inserting casts as well as replacing type references with Object (or the erased type, to be more precise).
These interfaces do exist in 1.4, and
without the generics.Exactly. Which means compareTo takes an Object, and you should change your overriding method accordingly.
But this raises a new question: how does my 1.4
compiler know anything about generics? It doesn't and it can't. As the compiler is telling you, those interfaces expect Object. Think about it, you want to implement one interface which declares a method argument type of Object, in several classes, each with a different type. Obviously all of those are not valid overrides. -
Firefox is not opening and is NOT present in task manager
With no apparent reason FF is not opening and is not present in Win Task Manager. I tried to reinstal, reset registry and other common solutions but none of them changed anything. After doubleclick on an icon nothing happens... and thats all.
For some reason it is ok now after I've installed FF 3.0.6 and then made an update to 3.6.
-
TS3991 can't sync Notes in iCloud with Notes in my Macbook Pro
can't sync Notes in iCloud with Notes in my Macbook Pro
You can't sync contacts on your Mac with iCloud running Snow Leopard (10.6.8). That requires Lion (10.7.5) or higher. If your system can't run this, you'll have to go to turn of contact syncing with iCloud and either start syncing them with iTunes, or use an alternative service such as a Google contacts. You could, for example, go to Settings>iCloud on your phone, turn contacts off, choose Keep on My iPhone when prompted, then set up a Gmail account and sync them as explained here: https://support.google.com/mail/answer/2753077?hl=en.
-
My Ipad 2 is not working. Is not turning On. I dont' know what's happening. I'm trying to turn it on and I have no answer. Screen is out, nothing come to the screen. Battery is ok at 60% charged when I turned off last time, and after minutes when I turned on, it not worked anymore. If somebody have an idea what may happenning, please let me know.
I don't know what yu mean by "screen is out" but try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Product is not abstract and does not override abstract method
Received the following errors.
Product.java:3: Product is not abstract and does not override abstract method ge
tDisplayText() in Displayable
public class Product implements Displayable
^
Product.java:16: getDisplayText() in Product cannot implement getDisplayText() i
n Displayable; attempting to use incompatible return type
found : void
required: java.lang.String
public void getDisplayText()
^
2 errors
Code reads as follows
import java.text.NumberFormat;
public class Product implements Displayable
private String code;
private String description;
private double price;
public Product()
this.code = "";
this.description = "";
this.price = 0;
public void getDisplayText()
String message =
"Code: " + code + "\n" +
"Description: " + description + "\n" +
"Price: " + this.getFormattedPrice() + "\n";
public Product(String code, String description, double price)
this.code = code;
this.description = description;
this.price = price;
public void setCode(String code)
this.code = code;
public String getCode(){
return code;
public void setDescription(String description)
this.description = description;
public String getDescription()
return description;
public void setPrice(double price)
this.price = price;
public double getPrice()
return price;
public String getFormattedPrice()
NumberFormat currency = NumberFormat.getCurrencyInstance();
return currency.format(price);
Please help!Received the following errors.
Product.java:3: Product is not abstract and does not
override abstract method ge
tDisplayText() in Displayable
public class Product implements Displayable
^
Product.java:16: getDisplayText() in Product cannot
implement getDisplayText() i
n Displayable; attempting to use incompatible return
type
found : void
required: java.lang.String
public void getDisplayText()
^
2 errors
Code reads as follows
Please use the code tags when posting code. There is a code button right above the text box where you enter your post. Click on it and put the code between the code tags.
These error messages are quite clear in telling what is wrong. You have an Interface called Displayable that specifies a method something like thispublic String getDisplayText() {But in your Product source code, you created thismethodpublic void getDisplayText() {The compiler is complaining because the methods are not the same.
You also need to return a String in the method probalby like thisreturn message; -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
Maybe you are looking for
-
Receantly I bought a 4s iPhone with 32gb of capacity. The issue consist in by some way the iTunes or iPhone change the name of the artist to others, it looks like that is check marked some option to auto-recognize the name of the song and artist. Ple
-
Store Business document in FD32
Hi All Can anyone help me out on how to activate the functionality of Store Business document in FD32 It in ->Go to - FD32 ->On Title BAR(customer credit management change :overview) click on the ICON displayed left corner Create - Store Business
-
Lightroom duplicating drive on import, driving me crazy.
Recently I started noticing a strange behavior in LR on import. I import photos from my SD card, converting to DNG in a folder structure based on days, months, years. When the import is done... I see (in the folders secton on the left panel), two dri
-
MDT Database Variables post-install
Is the information in the MDT database available to a post-install script? I need to run a Lenovo utility to set the asset tag on the PC. I would like to pre-populate the MDT database with the serial number (which is what I'll use to match the unique
-
I updated to the newest version of Reader XI (11.0.02) from the previous version of Reader XI when it was released and since then haven't been able to open pdf files. When I double click on a pdf or the shortcut to Reader I get the animated "busy" c