OSS Notes issue.. help needed

Hello,
Regarding OSS Notes:398217, When I open this oss notes, the status is showing "Cannot be implemented', when I try to implement it is showing message "SAP Note does not contain valid correction instructions'. What will be the issue here? Please help me.
Thanks,
Shreekant

Hi Shreekant,
There could be two reasons:
Reaons 1:
Not all SAP notes involve changes to programs, some notes can also involve make configuration (SPRO) changes which need to be done manually by the system user. Hence if the note is the type, then you cannot implement it, but need to read the note and implement the correction instructions manually.
Reason 2:
The SAP version is higher than the version for which the SAP note is intended.
Now here note 398217 does make changes in a program however it's version is upto 4.6C. You can check program RLMOBINV from SE38 and go to subroutine UPDATE_TO_DATABASE and check whether the chnage indicated by the note has already been implemented. If your SAP version is > 46C then it has and hence SAP wont allow you to implement a obsolete note for this version.
Cheers,
Aditya

Similar Messages

Very important OSS Note issue

Hi ,
i have to implement an OSS Note 409645 .
we need to do very small changes in Program /SAPDMC/LLSMW_GLO_020F03.
But we are getting information message '' No valid change license available for namespace /SAPDMC/ '' after this action terminates.
i am unable to understand some points mentioned in description of OSS Note
can any one please help me in understanding it and help us how to implement this note
Long Text
Symptom
When importing a project (export/import via text files), the following
error occurs:
Error while importing project xxxxxxx (table /SAPDMC/LSMCUST)
Message number /SAPDMC/LSMW_GLO_010046
Additional key words
Cause and preconditions
The error was caused by an incorrectly exported record.
Solution
If you have not yet done so, change the namespace role of the /SAPDMC/
namespace from 'P' to 'C' using the tools in transaction SE01.
Then implement the attached correction in the include
/SAPDMC/LLSMW_GLO_020F03 of the exporting system.
Repeat the export, the export should then no longer export the incorrect
line. After that, repeat the import into the target system.

Hello Gaurav,
From my understanding, this note was two steps of implementation:
- Manual steps
- Program corrections
In manual steps, it seems you have to use transaction SE01 to change some configuration. To do this, check:
- Enter SE01 transaction
- Click on icon 'Transport Organizer Tools'
- Double click on entry 'Display/Change Namespaces'
- Search for entry namespace /SAPDMC/ and change 'namespace role' attribute from P to C.
For program corrections, you can implement them using SNOTE. It is the most recomended procedure.
Hope that this may help you.
Kind regards.

OSS notes issue

Hi Experts,
I got one OSS note : 653949 for missing some standard structures in system.
I understood that this Notes is mainly for the extneding the BAPI listed in that OSS note for adding some parameters.
That importing parameters will be referred by those structures for which I am looking for. Both the structures creating is part
of OSS implemention but I need to have only both structures in my system. Don't want remaining part.
Here, I have doubt that how can I use this OSS note for my requirement. Will it work properly If I siimply create with the
access key i.e. partial implementaion of that note OR anything else I need to take care of .
Structures : DMSCLS_SEARCH_OBJECTS and DMSCLS_SIMPLE_SELECTION
Can you please suggest me ?
Thank you in advance.

Hi,
In your scenario you can go only with Table Implementations, as there are no dependencies.
Thanks.,
Anitha A

DVR/STB/Remote issues - Help Needed

New to Verizon FIOS (Installed about 2 weeks ago). Have a few issues. Any help is appreciated
1) When im on the Home Media DVR and i fast forward through a program, when i stop or hit play, an extremely loud beep that lasts for 1-3 seconds comes from the speakers. How do i get this to stop, what is causing it, etc?
2) When i fast forward from one of the STB (regular HD box), if i hit FF once, it fast forwards pretty slow, if i hit it again, it goes somewhat faster. The problem is. When i hit it that 2nd time, it seems that 70-80% of the time, it jumps me back to an early portion of the program. I.E. Was watching the 2 hour episode of "24", was one hour and 20 min in, got to commercials, i hit FF twice and it jumped me back to 23 minutes in. Tried again at next commercial break and it jumped me back to 11 minutes in. What is the deal here? How do i fix it?
3) Are there only 2 fast forward speeds on STB? I came from Brighthouse that had 4 speeds, im a little disappointed with only 2 speeds. Can anyone verify?
4) The remotes seem to take 2 seconds or so to register when performing any function other than changing channels. When i hit FF or REW, DVR or Last, it seems to take a few seconds to kick in. Is this a known issue, or possibly my box or remotes?
Thanks for any and all help

Sorry the ff speeds are the same. On the main MR-DVR there are 3 ff speeds, where the remote STB has 2 ff speeds. I think they did that because how the remote system works, it has slower responses being remote. But with the update you will not need to worry about the ff, because you will not get the hub error. I was one of the first people to get the update and I have not seen the hub error yet.
As far as a time frame I don't believe there is any thing public about it, I think the only thing they have said is it is going to be rolled out per market, and one market a week. But nothing on the order of the markets.

Ipod Touch: My Issues, help needed as fast as possible

Well recently i got an Ipod Touch 2nd Generation for christmas, and i must say i love it. But i have got some serious problems. 1) all applications that were not standard on the itouch crash unexpectedly and the only way to rectify this issue is to download something from the app store and they work again :S. Yes that is as bizarre as it sounds. Sometimes it will work fine and i can use any of my apps whenever i like. But frequently(more frequently as time goes on) the applications dont open, i touch them they open the background for the app and they take me back to the main screen. I have tried the following: reseting the iPod, restoring it to factory settings, uninstalling apps and then re-installing and this issue is resolute. I also happen to know that some other 2nd Generation Touch owners at my school have the very same issue. I have seen some threads dotted about explaining their issues that are similar to this, meaning its fairly widespread.
My second issue is really bugging me, i opened the itunes store for the first time on my iPod(i never get any of my music from itunes normally i detest the application.) and all of a sudden it downloaded a podcast without me telling it to. It was called Podhead: The DoorWhores Off to vegas. This is something i really do not wish to have on my iPod. So i synced it to my windows OS and tried to re-sync the iPod's podcasts with my library so that it would dissappear. But it didn't, i then tried setting it to manually putting files on my ipod and alas it doesnt show up in the podcasts sub section of the device. I tried playing the podcast and it takes me to the home screen of my ipod with the Play triangle flickering constantly in the top right of my ipod. I don't know what is going on with that but i havnt restored it to factory settings after this issue, mainly because my iPod refuses to accept that i own all of the apps i have backed up and i have no desire to manually re-download them to my ipod.
3) That last scentence brings me nicely onto my final problem which is this: my computer tells me that i do not have the authority to put onto my ipod. Despite all of them being free and despite all of them having being backed up from my ipod.
Any help with these issues would be much appreciated. I am in desperate need of assistance before i come to the end of my tether and resign myself to a long trip to the nearest apple store. thanks in advance

Sanga wrote:
1) all applications that were not standard on the itouch crash unexpectedly and the only way to rectify this issue is to download something from the app store and they work again
Did you try to restore your iPod to factory settings and add your apps one by one to find out which app causes the crash? Try not to restore from a backup it may contain the corrupt parts you don't want to install again.
3) That last scentence brings me nicely onto my final problem which is this: my computer tells me that i do not have the authority to put onto my ipod. Despite all of them being free and despite all of them having being backed up from my ipod.
Deauthorize and authorize your computer in iTunes, here's how to:
http://support.apple.com/kb/HT1420

SQL Query Sorting Order issue - Help needed

Hi All,
I am using the following query in my project to display the records in the grid.
/* Formatted on 04-09-2013 PM 8:01:51 (QP5 v5.149.1003.31008) */
SELECT eol,
         status_msg,
         relation,
         building_name,
         device_id id,
         CEIL (SYSDATE - updated_date) duration,
         lab_id,
         aisle_id,
         aisle_location_id,
         ip_address,
         port,
         slot_num,
         hostname,
         pid,
         description,
         sl_num,
         eitms_code,
         status,
         dnd_flag,
         aisle,
         aisle_location,
         spname,
         os_version,
         user_id,
         TO_CHAR (updated_date, 'YYYY-MM-DD HH24:MI:SS') updated_date,
         isterm_svr,
         net_type,
         DEVICE_GROUP_REF,
         cmd_id_ref,
         LISTAGG (TESTBED_ID, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
            AS testbeds_id_ref,
         LISTAGG (NAME, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
            AS testbeds_names,
         spname || '-' || ip_address || '-' || port AS child_asset_group
    FROM DEVICE_TESTBED_VW
   WHERE lab_id IN
            ('7099849',
             '10769617',
             '4258712',
             '10513562',
             '10515074',
             '5882676',
             '8330925')
GROUP BY eol,
         status_msg,
         relation,
         device_id,
         lab_id,
         aisle_id,
         aisle_location_id,
         ip_address,
         port,
         slot_num,
         hostname,
         pid,
         description,
         sl_num,
         eitms_code,
         status,
         dnd_flag,
         aisle,
         aisle_location,
         spname,
         os_version,
         user_id,
         updated_date,
         isterm_svr,
         net_type,
         DEVICE_GROUP_REF,
         cmd_id_ref,
         building_name
ORDER BY building_name ASC,
         LOWER (child_asset_group) ASC,
         LOWER (relation) DESC
The problem is , if any one sorting with any column , the order is not correct
In this below code , i have done sorting by port . But the result data order is not correct .
/* Formatted on 04-09-2013 PM 8:07:02 (QP5 v5.149.1003.31008) */
SELECT eol,
         status_msg,
         relation,
         building_name,
         device_id id,
         CEIL (SYSDATE - updated_date) duration,
         lab_id,
         aisle_id,
         aisle_location_id,
         ip_address,
         port,
         slot_num,
         hostname,
         pid,
         description,
         sl_num,
         eitms_code,
         status,
         dnd_flag,
         aisle,
         aisle_location,
         spname,
         os_version,
         user_id,
         TO_CHAR (updated_date, 'YYYY-MM-DD HH24:MI:SS') updated_date,
         isterm_svr,
         net_type,
         DEVICE_GROUP_REF,
         cmd_id_ref,
         LISTAGG (TESTBED_ID, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
            AS testbeds_id_ref,
         LISTAGG (NAME, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
            AS testbeds_names,
         spname || '-' || ip_address || '-' || port AS child_asset_group
    FROM DEVICE_TESTBED_VW
   WHERE lab_id IN
            ('7099849',
             '10769617',
             '4258712',
             '10513562',
             '10515074',
             '5882676',
             '8330925')
GROUP BY eol,
         status_msg,
         relation,
         device_id,
         lab_id,
         aisle_id,
         aisle_location_id,
         ip_address,
         port,
         slot_num,
         hostname,
         pid,
         description,
         sl_num,
         eitms_code,
         status,
         dnd_flag,
         aisle,
         aisle_location,
         spname,
         os_version,
         user_id,
         updated_date,
         isterm_svr,
         net_type,
         DEVICE_GROUP_REF,
         cmd_id_ref,
         building_name
ORDER BY PORT ASC
Can some one help me to fix this issue?

Hi,
Sorry, it's not clear what you want.
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved, so that the people who want to help you can re-create the problem and test their ideas.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Simplify the problem as much as possible. For example, if you really need to GROUP BY 28 columns, post a problem where you need to GROUP BY only 2 or 3 columns. (Just explain that you really have 28, so people will give solutions that are sure to work for all 28).)
Always say which version of Oracle you're using (for example, 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

AD OID Synchronization searchfilter issue (help needed)

Hi,
I am trying to Synchronize AD and OID. I am running into an issues where users are being populated both in groups and users containers in OID even though I specified my
searchfilter to put users under cn=users and groups under cn=groups. Following are the serch filters I am using and looks like it's not working. I want my users to be in cn=Users and groups in cn=Groups, but some how
I always keep getting the users being populated in cn=groups and cn=users.
Group filter:
searchfilter=(|(objectclass=group)(objectclass=organizationalunit)(!(objectclass=user)(!(objectclass=computer))))
User filter:
searchfilter=(|(objectclass=user)(objectclass=organizationalunit)(!(objectclass=group)(!(objectclass=computer))))Following are my Attribute Rules that I have both in group and user profiles:
AttributeRules
# attribute rule for mapping windows organizationalunit
ou: : :organizationalunit:ou: : organizationalunit
objectguid: :binary:organizationalunit:orclobjectguid: : organizationalunit:bin2b64(objectguid)
# attribute rule for mapping directory containers
cn: : :container: cn: :orclContainer
objectguid: :binary:container: orclobjectguid: :orclContainer:bin2b64(objectguid)
# attribute rule for mapping directordomains
dc: : :domain: dc: :domain
# USER ENTRY MAPPING RULES
# attribute rule for mapping windows LOGIN id
sAMAccountName,userPrincipalName: : :user:orclSAMAccountName: :orclADUser:toupper(truncl(userPrincipalName,'@'))+"$"+sAMAccountname
# attribute rule for mapping Active Directory LOGIN id
userPrincipalName: : :user:orclUserPrincipalName: :orclADUser:userPrincipalName
# Map the userprincipalname to the nickname attr by default
userPrincipalName: : :user:uid: :inetorgperson:userPrincipalName
# Map the SamAccountName to the nickname attr if required
# If this rule is enabled, userprincipalname rule needs to be disabled
#sAMAccountName: : :user:uid: :inetorgperson
# Assign the userprincipalname to Kerberaos principalname
userPrincipalName: : :user:krbPrincipalName: :orcluserv2:trunc(userPrincipalName,'@')+'@'+toupper(truncl(userPrincipalName,'@'))
# This rule is mapped as SAMAccountName is a mandatory attr on AD
# and sn is mandatory on OID. sn is not mandatory on Active Directory
SAMAccountName: : :user:sn: : person
# attributes to map to cn - normally this is the given name
#name: : :person:displayname: :inetorgperson
cn: : :person:cn: :person
# attribute rule for mapping entry and to create orclUserV2
# There should be a mapping rule with orcluserv2 objectclass
# without which the PORTAL may not function properly
givenName: : :person:displayName: :orclUserV2
# mail needs to be assigned valid value for default settings ing DAS
userPrincipalName: : :user:mail: :inetorgperson
mobile: : :organizationalperson:mobile: :inetorgperson
ObjectGUID:1:binary:user:orclObjectGUID: :orclADUser:bin2b64(ObjectGUID)
ObjectSID: :binary:user:orclObjectSID: :orclADUser:bin2b64(ObjectSID)
# GROUP ENTRY MAPPING RULES
#name: : :organizationalunit:ou: : organizationalunit
#name: : :container: cn: :orclContainer
#name: : :domain: dc: :domain
cn: : :group:cn: :groupofuniquenames
# displayname needs to be assigned a valid value for default settings on DAS
SAMAccountName: : :group:displayName: :orclgroup
# Description needs tobe assigned a valid value for default settings on DAS
Description: : :group:Description: :orclgroup
member: : :group:uniquemember: :groupofUniqueNames
managedby: : :group:owner: :orclprivilegegroup
sAMAccountName: : :group:orclSAMAccountName: :orclADGroup
ObjectGUID: :binary:group:orclObjectGUID: :orclADGroup:bin2b64(ObjectGUID)
ObjectSID: :binary:group:orclObjectSID: :orclADGroup:bin2b64(ObjectSID)Any help is appreciated. For example I see my userid being under cn=groups and cn=users both, even though I am user not a group.
Thanks

Hi WhiteSox!
I wounder if you ever solved this?
I guess that
Group filter:
searchfilter=(|(objectclass=group)(objectclass=organizationalunit)(!(objectclass=user)(!(objectclass=computer))))
User filter:
searchfilter=(|(objectclass=user)(objectclass=organizationalunit)(!(objectclass=group)(!(objectclass=computer))))
in both searchfilters you do search for the organizationalunit with a logical OR. as both users and groups can have this attribute they migth end up there.
I have to confess that I have struggled lately with the searchfilters as I am now on a AD-OID sync project.
cu
Andreas

Responsive menu issue help needed

Need some help trouble shooting an issue I'm having with a responsive menu not working. Use this link to see the website: http://www.sherwoodcompanies.com/home
When I test the menu for the smallest screen width, the menu is converting to the menu button like it's supposed to, but when you click on it, it does nothing. I'm sure this is a super basic thing I keep overlooking, but I can't seem to find the issue. Any thoughts?

No problem. We will figure this out. I am going to have you revert back to the way it was on a couple of things. Since this is foundation, I will study their docs a little and get this the way it is supposed to be. It has to be something simple.
Starting with the scripts.js file. revert back to the following.
Line 88 - $menuBtn = $('#menu-toggle'),
Line 89 - $navUl = $("#window"),
Line 107 - $navUl.toggle();
Foundation.css
On Line 1148 uncomment "overflow:hidden;"
On Line 1244 revertback to display:block instead of display:none;
I also want you to place your script files in the footer in this order. Also leave modernizer at the top in the header.
<script src="/_assets/js/vendor/jquery.js"></script>
<script src="/_assets/js/foundation.min.js"></script>
<script src="/_assets/js/vendor/fastclick.js"></script>
<script src="/_assets/js/scripts.js"></script>
This is the setup that it should be, but we know it still does not work. So I will look at it from another angle.

Viewing web cam does not work, help needed

I'm having trouble viewing an iSight webcam on my iBook. I start up iChat on my MacBook then click accept to start viewing the webcam. 'connecting' comes up and thats as far as it goes. Same with audio, click accept and then it goes to 'connecting' then the same happens. I thought you could still 'view' the webcam even though theres not one installed on my iBook? Any help would be much appriciated, thank you!

Hi Tymon,
Can I ask if you have an AIM or @mac name (A screen name ) ?
If so have you set this up in iChat ?
"Connecting" would indicate you are not Logged on to the AIM server hence my first question.
You can View your Preview by Clicking on your own Video icon next to your Buddy Icon pic. (or by going to the iChat > Preferences > Video section).
If the mac firewall is On but you have not set iChat ports then you could have problems particularly if in the Advanced section you have Stealth mode selected.
You will also need to open the ports in any device that routes to connect you to the internet.
This FAQ may help explain the questions further
http://discussions.apple.com/thread.jspa?threadID=527902
10:41 PM Sunday; April 29, 2007

Addon not starting - help needed in using ExtensionPackage tool

Hi,
I have deployed my addon using Lightweight Deployment in 9.1 PL00.
When starting my addon, I get the error: SapProject1 has stopped working.
What may be the issue?
I packaged my addon using ExtensionPackage tool. In the SBO compatibility tab, we need to give the version like 910.000.00. How should I check I my exact version number? In SAP application->Help->About SAP Business One, it shows version as 9.10.105, but in ExtensionPackage tool, I am supposed to write as nnn.nnn.nn. So how should I mention there?
Secondly, in the Register 32-Bit Microsoft COM DLLs tab, should I select the DLLs: Interop.SAPbobsCOM.dll and Interop.SAPbouiCOM.dll ?
Please guide me. I am trying to do it for first time.
Thanks.

I have never ran the DocCheck from the command prompt, so I really don't know how to do it, but I do run it succesfully using ant (build tool from apache - jakarta, if you use tomcat you already have it installed).
So.. if you do use ant.. this will help:
<target name="doccheck" depends="prepare">
     <javadoc
          packagenames="${packages}"
                destdir="${doccheck.home}"
          doclet="com.sun.tools.doclets.doccheck.DocCheck"
          docletpath="${doccheck.path}" >
          <classpath refid="project.classpath"/>
          <sourcepath refid="project.classpath"/>
     </javadoc>
</target>If you don't use it.. I guess I was of no help, sorry.
Ylan

Connecting external audio interfaces?! Issues, help needed!

Ok well basically i'v always used a pc to do music using cubase and a variety of hardware including a steinberg mi4 external audio interface connected via usb. Now on my pc which is actually less powerful than my new macbook (the 2.2ghz model) the interface works with out fault no latency, no distortion.
However once used on my new shiny macbook, for which i'v purchased logic pro as opposed to cubase (felt like a change) when trying to use my interface via usb on the mac through logic i seem to have issues with recording and all sound comes through distorted with a great deal of latency. I'v tried altering the sample depth and the bit rate and nothing seems to work?
I have downloaded mac specific drivers for the hardware so i'm sure its not a driver issue?
Anyone with any suggestion, cos i'm a bit gutted really?
P.s. Does anyone know if you can change the graphics card in a macbook?
Ben

Hi, im having the same issue, using garageband and logic pro. I used pc to make music with no problems at all with my Zoom g9.2tt guitar fx usb interface.
Now with mac i get distorted and lots of latency.
One way i found that can make this work with garageband is use the internal sound card to play sounds and the usb interface to record this helps a lot. This trick makes it for garageband but not for logic pro(still getting distortion/latency).
By the way i used to have an emachines laptop with 512 ram memory and a 1,6ghz semprom processor, believe or not, easier to record on that one, with no latency and no distortion.

IS07 Car Music Bluetooth Streaming Issue - Help Needed

I drive an Audi A1 which I have owned from new 11 months ago. I updated my iPhone 5 to the IS 7.0.4 around 1 month ago and since doing that I now have streaming issues in my car. The connection is via bluetooth, and the music is streamed from my iPhone, however since the update the music cuts out, skips and pauses............
I took the car to a service centre today where it was confirmed a known issue within the Audi network.
So how do we go around this? What do I need in order to stream music without the interference? I am pretty sure Apple wouldn't want to pay my car invoice for the added extras that I purchased in order for me to enjoy my music so surely there must be a way around this?
Any advice is greatly appreciated.
Thanks,

This is not about law, it's about software/hardware. But since you're bringing it up, when Siri was introduced for the iPhone 4s, there was a man in a car using siri with his apple earplugs. I searched for law about this in my country (Netherlands) and it's not forbidden.
Now back to my issue: I want to use a headphone to listen to music and I want to make a call through bluetooth. Iphone doesn't remember I was listening to the music through the headphone. Issue, right?

Major issue, help needed

Hi there,
Okay, I've got a problem, well a few of them actually, and I really needed to get some advice from others. So, I'm doing an HNC in Interactive Media at the moment in college. My class isn't exactly the best place to study, as its quite loud, but yet it's the only room (available on certain days at certain times) that I can use to get my work done because it has all the Adobe software I need.
My problem is that the version of the software is only at CS4, which the exception of Photoshop CS6 Extended added in their too. Now, I have no clue as to why the software hasn't been updated and it's not causing me a bit of worry. I desperately want to my work outside of class, to work away from the noise where there is no distraction and so on. So, I had taken out a Student Loan to buy myself a MacBook Pro and I was dead-set on buying myself CS6. However, I quickly realized that CS6 wouldn't be backwards compatable with older versions, i.e. CS4, right?
So I asked my lecturer, she advised me to buy the Adobe CS4 software package, which I was fine with. I had spent the last few days trying to find a Mac version, with the student discount (Like I could afford the full retail as a student), but I couldn't find one trace of it. I was always redirected to some fishy website that was able to crack it for me, which I didn't want - obviously.
My problem is that I've seen on the community discussion that Adobe doesn't sell CS4 anymore - already I'm panicking - because I don't know what to do. I can only see the option of: buying CS6 and basically not being able to use it because my lecturers wouldn't be able to open any of those files.
Please, I really need some help here. If you have any advice or knowledge on where I could possibly buy CS4 (if that is even possible) or maybe a method of saving CS6 files as CS4 files?
Thanks,
Andrew

And what program are we actually talking about? PS files are always compatible when saved with the "Maximum Compatibility" option, Illustrator allows back-saving to older formats and InDesign can save to CS4-compatible IDML (an exchange format). For other apps it's not really relevant - HTML is HTML and which version of Dreamweaver you use to edit it doesn't matter. Conversely, pretty much all universally accepted media formats for audio, video and images can be opened in most versions as can PDFs. That leaves only the video applications and Flash, but I can't imagine your teacher looking at your Premiere Pro project file when all you have to deliver is an edited movie nor do I think it would be particularly relevant how you created a Flash or After Effects file. All that aside, things are as they are - unless you can find someone trustworthy willing to part with his used CS4, there is no legal way to get it. It's a moot point, though, 'cos no matter what, it won't work properly on your shiny new Mac and may not even install, so you are in a very dark place, either way....
Mylenium

Production issue -help needed

Hi,
I am giving a user-defined java code below, which we need to change. I understod that the fucntion is used to store values in memory. But my doubts are something else.
GlobalContainer gc = container.getGlobalContainer();
AbstractTrace trace = container.getTrace();
int j = 0;
for (int i = 0; i < ConnectEAN.length; i++) {
if (ConnectEAN<i>.equals("__cC_")){
    j++;
    if (PremiseID[j].equals("__cC_")){
      j++;
} else {
    trace.addInfo("EAN = " + ConnectEAN<i> + " Prem = " + PremiseID[j]);
    gc.setParameter( ConnectEAN<i>, PremiseID[j] );
result.addValue("");
I need to know what ' equals("__cC_")   ' means.??? whats the underscore doing there??
Also what does the below line doing?
    trace.addInfo("EAN = " + ConnectEAN<i> + " Prem = " + PremiseID[j]);
Why do we need to add info to the trace? whats is its concept?
Please help.
Thanks,
John

hi John,
trace.addInfo("EAN = " + ConnectEAN + " Prem = " + PremiseID[j]);
This object enables you to transfer messages to the mapping trace. If the trace level is set correspondingly. then the trace is visible in message monitoring (transaction SXMB_MONI). The execution of the mapping is not interrupted when the entries are written to the trace.
so go to SXMB_MONI expend the tree and go to trace you can fond the corrosponding trace out there.
Trace object have the following Methods
1)void addInfo(String message);     Adds a message message to the mapping trace with the trace level info.
2)void addWarning
(String message);     Adds a message message to the mapping trace with the trace level warning.
3)void addDebugMessage (String message);     Adds a message message to the mapping trace with the trace level debug.
regards,
navneet

Wi-Fi Connections issues: HELP NEEDED!

I've been running my iPhone mostly on the EDGE network the past few weeks. Some hair might have gone grey while I was waiting for it to laod, but it loaded after sometime.
Anyways, I have a linksys wireless router and everytime I try and use my Wi-Fi with the iPhone it says "Safari can't open the page because it could not connect to the server."
Does anyone have a solution for me to change settings through network settings, or anything eles that might be quick and easy?

Here is a quick check list you can take a look at and try. As well as a couple questions. It sounds like possible interference of some kind.
1. Has Firmware on the router been updated?
2. Have you updated iPhone Software to 1.0.1?
3. Have you done a restore on the iPhone and tested the network again?
4. You may wish to inquire to your router provider about changing the channel on your router, To see if it is stopping the iPhone from grabbing a stable connection.
Test your iPhone on another Wireless Network, If other Wireless Networks work, Then it could just be a compatibility issue with your router, But please inquire to your Router Provider about how your wireless device will not hold the information of the Router IP and other information, They may be able to change a setting in the router to help stabilize the connection.
Apple has also released a new router, The Airport Extreme 802.11n
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=E84 08794&nplm=MB053LL/A

OSS Notes issue.. help needed

Similar Messages

Maybe you are looking for