Oss problem: how to start muted?

When I start oss i get a loud sound that breack my ears...how con i start oss with all output muted so I can regulate them??
And how can i save the levels for my user(aside from root)??
Thanks
Last edited by The_ouroboros (2009-02-07 12:51:50)

Making the state writable by the user should solve it right?
If you really want muted you could put ossmix vol 0 in rc.sysinit.

Similar Messages

  • Sender File Adapter Conversion problem - how to start new recordset?

    Hi guys!
    I have a source file like following:
    aaaakkkkkk
    uuuupppppp
    &&hhhhffffff
    6666uuuuuu
    3333rrrrrrrr
    &&kkkkoooooo
    which means - fixed length 4,6 and && starts new recordset.
    I need to get structure like:
    <recordset>
      <item>
        <a>aaaa</a>
        <b>kkkkkk</b>
      </item>
      <item>
        <a>uuuu</a>
        <b>pppppp</b>
      </item>
    </recordset>
    <recordset> ... with h,f and 6,u </recordset>
    <recordset>
      <item>
        <a>kkkk</a>
        <b>oooooo</b>
      </item>
    </recordset>
    Any ideas?
    Let's say, I can add && on the beginning of the file and other "lite" changes... but structure stays the same...
    so, how to start new recordset? with which conversion parameter? for items it is clear...
    Thanx a lot!
    Olian
    Message was edited by:
            Olian Saludew

    aaaakkkkkk<end_of_line>&&uuuuwwwwww<end_of_line>...
    then normal parameters should work fine,
    item.fieldFixedLengths==4,6
    Item.fieldNames=field1,field2
    item.endSeparator=<end_of_line>

  • Migration assistant problem - how to start over

    Bought a new iMac to replace an old Power PC running Leopard. Tied to use Migration Assistant last night and in the last minute while transferring time zone settings, it stopped working and said it lost the connection. Checked to make sure everything was still connected, but it wouldn't work and I had to cancel, at which point it stopped responding (I gave up, went to bed, and eight hours later when I woke up it was still trying to cancel). I shut everything off, turned on the new computer, and it appears as though most of the applications did in fact transfer. However, it says that 120 gigs are being used, which isn't possible because the old hard drive was only 60 gigs, and it wasn't full.
    I think the easiest thing might be to just start over. I have reformatted in windows before, but have never had to do so on a Mac. This is a stupid question, but how do I erase what I have and start from scratch?

    Hi cbbjr
    Welcome to the Intel iMac section of the forum.
    To start over see > http://support.apple.com/kb/HT3910
    Also see > http://discussions.apple.com/thread.jspa?threadID=435350
    Personally I would only transfer my music, photos and doc's, so that I could start enjoying it and then as Kappy suggest's closely check the compatibility of any other old applications that I had before installing them.

  • How to start a local HTML5-file automatically as a weblink?

    Hi, i started to learn DPS two weeks ago and had a lot of fun. But yesterday i had a problem how to start a weblink autmaticially. The checkbox in the Overlay Creator panel for activating auto-start doesn't react by clinking on it. And the default is inactive. The other checkboxes in the panel also don't react. Could this problem be a InDesign-bug? The background, what i tried to do ...i inserted a local HTML5-File as a weblinki t's shown on my iPad after synchronizing. But i have to tap on it for showing the HTML-content - but i want to start it automatically.
    Thanks for your feedback. I'll hope, someone could help me.
    Bye Bert

    You're the man, Bob! After deleting the InDesign preferences i was able to activate the different Checkboxes. *thumbs up*
    Hint: Starting InDesign with shortcut for deleting the preferences  -->  "shift + alt + cmd + ctrl"

  • I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 v.3. What could be the problem, how ca

    I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 version 3. I can open Internet Explorer, but that's not my default browser, so I have no problem with the Internet connection.
    What could be the problem, how can I restore my browser without losing my bookmarks, settings, etc?
    == Operating system ==
    windows XP

    If you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]]. Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Update Firefox, see [[Updating Firefox]]

  • Could anyone please tell me how to start to solve this problem?

    Hi,
    I'm new to SOA world. I was making a PURCHASE ORDER PROCESSING application.
    I created DB connection,Credit Card Validation Service, Purchase Order Routing Service,
    BPEL Orchestration, Adding Human Workflow, Adding Business Rules, then Adding Fulfillment.
    From that time one problem was created,showing BPEL component has invalid settings.
    As i told before i'm new to this technology, so could anyone tell me how to start to check and solve this problem ?
    I have no idea from where and how to start.
    Regards,
    Sujay
    Edited by: Sujay S on Sep 17, 2009 3:18 PM

    Hi James,
    I'm new to SOA world. I was making a PURCHASE ORDER PROCESSING application.
    I created DB connection,Credit Card Validation Service, Purchase Order Routing Service,
    BPEL Orchestration, Adding Human Workflow, Adding Business Rules, then Adding Fulfillment.
    From that time one problem was created,showing BPEL component has invalid settings.
    As i told before i'm new to this technology, so could anyone tell me how to start to check and solve this problem ?
    I have no idea from where and how to start.
    Regards,
    Sujay

  • Cannot resolve elements 11 problems so must restart. Also must un start program. How to start?

    Cannot resolve elements 11 problems so must restart. Also must un start program. How to start?

    Are these the tool option problems in your other discussion? If so what happened after Resetting the tools? If that didn't help, try selecting Edit> Preferences> General> Reset Preferences on Next Launch and restart PSE.
    What do you mean by 'How to start'? Are you asking how to uninstall? If on Windows there will be an uninstaller in the Control  Panel Add / Remove Programs section.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Microphone starting muted on AIR application SDK 2.5

    According to the documentation
    http://help.adobe.com/en_US/air/reference/html/flash/media/Microphone.html
    "Content running in the AIR application sandbox does not need permission to access the microphone and no dialog is displayed. AIR content running outside the application sandbox does require permission and the Privacy dialog is displayed"
    But I'm having problems starting the Microphone object, which starts muted and permissions need to be given right clicking on the flash object.
    This function returns always true before permissions is given:
    public function isMuted():Boolean {
    var mic:Microphone = Microphone.getMicrophone();
    return mic.muted;
    The swf loaded is inside the application sandbox, but it's failing also from the debugger.
    Any ideas what else to look?
    Thanks,
    Guille

    Updated note:
    This might be a possible work around...
    The limitations I mentioned in my previous email apply when including the SWF file ‘for rendering’ – i.e. when using an <object/> tag.
    In AIR a developer can include a SWF file as a script – i.e. using a script tag like so: <script src="lib/applicationupdater_ui.swf" type="application/x-shockwave-flash"></script>. When doing this, the SWF is loaded in the application sandbox and JavaScript can call AS functions as if they were JS functions.
    If the customer’s code doesn’t depend on displaying things (or the UI part is reasonably well separated from the rest of the logic), it should work without any changes. If not, it might require some changes, but still not as radical as rewriting their code to JavaScript.  A simple example of using a SWF in this way can be found at http://www.stratulat.com/blog/update-your-javascript-air-application-with-ease - it shows how to use the Application Updater library (a SWF) in a JavaScript application. This could be a starting point for the customer about how to use a SWF as a script and how it should “look like” in order to be used this way (as the framework is open-source).

  • Dear Mr./Mrs.,  I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I

    Dear Mr./Mrs.,
    I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
    Yours sincerely,
                             Hesham.

    Welcome to the user to User Technical Support Forum provided by Apple.
    For your issue...
    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...
         Or Email Here  >  Apple  Support  iTunes Store  Contact

  • How to start with Idocs??

    Hi,
    I am a novice in sap. Can you please guide me how to start working with IDocs?? I know the basics about ale, edi, message type, idoc type and transactions associated with it.
    Essentially, Can I have sample problems to practice IDocs so that i could become confident in this topic??? Plz. give hints as well...... to avoid getting bothered with further queries.
    Thanks
    Gaurav.

    Hi Gaurav,
    Check this info.
    IDoc is a intermediate document to exchange data between two SAP Systems.
    *IDocs are structured ASCII files (or a virtual equivalent).
    *Electronic Interchange Document
    *They are the file format used by SAP R/3 to exchange data with foreign systems.
    *Data Is transmitted in ASCII format, i.e. human readable form
    *IDocs exchange messages
    *IDocs are used like classical interface files
    IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
    WE30 - you can create a IDOC type.
    An IDOC with data, will have to be triggered by the application that is trying to send out the data.
    FOr testing you can use WE19.
    how to create idoc?
    *WE30 - you can create a IDOC type
    For more information in details on the same along with the examples can be viewed on:
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
    http://www.sappoint.com/presentation.html
    http://www.allsaplinks.com/idoc_search.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://www.erpgenie.com/sapedi/idoc_abap.htm
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30 )
    Create Message Type ( WE81 )
    Assign Idoc Type to Message Type ( WE82 )
    Creating a Segment
    Go to transaction code WE31
    Enter the name for your segment type and click on the Create icon
    Type the short text
    Enter the variable names and data elements
    Save it and go back
    Go to Edit -> Set Release
    Follow steps to create more number of segments
    Create IDOC Type
    Go to transaction code WE30
    Enter the Object Name, select Basic type and click Create icon
    Select the create new option and enter a description for your basic IDOC type and press enter
    Select the IDOC Name and click Create icon
    The system prompts us to enter a segment type and its attributes
    Choose the appropriate values and press Enter
    The system transfers the name of the segment type to the IDOC editor.
    Follow these steps to add more number of segments to Parent or as Parent-child relation
    Save it and go back
    Go to Edit -> Set release
    Create Message Type
    Go to transaction code WE81
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter
    Click New Entries to create new Message Type
    Fill details
    Save it and go back
    Assign Message Type to IDoc Type
    Go to transaction code WE82
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back
    Check these out..
    Re: How to create IDOC
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    Please check this PDF documents for ALE and IDoc.
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
    Also check this links for additional information.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards

  • Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

    hello i have a problem when i start woorksheet, my computer crash with blue screen.
    OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
    I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
    The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
    Thanks for your help.

    The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
    -The Help-->Report information - this will tell us more about the computer, video and installed memory
    -Installed hardware - what DAQ devices are you using (exact models!)
    -The worksheet that crashes - we need to see how the timing is configured in the worksheet
    -What other programs are running at the same time?
    -Does the worksheet crash every time?
    -Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
    Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
    Regards,
    -cj
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • How to start a RMI program

    I have write RMI program the problem it's that I don't now how to start it
    This is my Interface
    import java.rmi.*;
    import java.rmi.Remote;
    public interface DataInterface extends Remote {
    public String testRemote() throws RemoteException ;
    This is my server
    import java.rmi.*;
    import java.rmi.server.*;
    import java.rmi.registry.*;
    public class DataServer extends UnicastRemoteObject implements DataInterface {
    DataServer() throws RemoteException{
    super();
    public String testRemote() throws RemoteException{
    return "Merge obiectul remote";
    public static void main(String[] args) {
    System.setSecurityManager(new RMISecurityManager());
    try{
    //LocateRegistry.createRegistry(1099);
    DataServer testServer = new DataServer();
    Naming.rebind("//localhost/SERVER", testServer);
    }catch(Exception e){
    e.printStackTrace();
    This is my client
    import java.rmi.*;
    import java.rmi.registry.*;
    import java.rmi.server.*;
    public class DataClient {
    public static void main(String[] args) {
    System.setSecurityManager(new RMISecurityManager());
    try{
    Remote remoteServer = Naming.lookup("//localhost/SERVER");
    DataServer server = (DataServer)remoteServer;
    System.out.println(server.testRemote());
    } catch(Exception e){
    e.printStackTrace();
    And this is my policy file
    grant {
    permission java.net.SocketPermission "*:1024-65535",
    "connect,accept";
    permission java.net.SocketPermission "*:80", "connect";
    All this files are in c:\temp and this directory is in my PATH variable. I've compilated the interface, server, client with
    javac -classpath file.java
    After that I generate with rmic the stub skel file in c:\temp. In this point I have all the files that I need. If is somebody kind to tell me from now what do I have to do to make this program work :)). Thanks for any help.

    so..u have everything ready..
    open cmd prompt and say 'start rmiregistry' - >this opens a new cmd prompt for rmi registry.let it run
    now first run ur server by saying 'java DataServer' // include options as u like. this should be running without terminating.
    now open new cmd prompt for ur client and say 'java DataClient '.
    thats all.
    if you want to run the client from a different machine, then try copying the client file into another m/c after changing the code from 'localhost' to the ip address of the server m/c. then just say 'java DataClient '
    hope this works fine!

  • Help : After upgrade to IOS5, I only can use my iphone 3gs in Spore instead of Msia. Any1 know what is the problem & how to solve it?!

    I bought iphone 3gs in singapore last year,I had no problem to use it in Singapore & Malaysia but after i upgrade to ios5,i can't use it in malaysia.It will automatic restart my phone itself. Is it because of IOS5 problem?!Because when I register my itune a/c, I selected the country is Singapore. Anyone know what is the problem & how can I solve it?!

    If it automatically restarts the phone firmware is corrupt. Restore the phone with iTunes and set up as a new phone, do not restore your backup, which is likely where the corruption is. If it then works you can try restoring just the backup. If that breaks it again you know where the problem is; you will have to start over and manually reinstall your content.
    To restore just the backup, right click on the phone's name in iTunes and select "restore from backup"

  • Problem to weblogic start managed server "OraSDP"

    Hi all,
    first, sorry if this location is not correct to this thread.
    I have a problem when I start a weblogic managed server, which indicates there is an error to check a QueueConnectionFactory into JNDI.
    The log of this error is next:
    <16-feb-2011 13H35' CET> <Warning> <Connector> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
    <16-feb-2011 13H35' CET> <Error> <oracle.sdp.messaging.util> <SDP-25716> <Se ha producido un error al consultar QueueConnectionFactory en JNDI, saltando: [OraSDPM/QueueConnectionFactory, OraSDPM/Queues/OraSDPMDriverDefSndQ1] >
    <16-feb-2011 13H35' CET> <Error> <oracle.sdp.messaging.util> <SDP-25700> <Se ha obtenido una excepción inesperada.
    javax.naming.NameNotFoundException: While trying to lookup 'OraSDPM.QueueConnectionFactory' didn't find subcontext 'OraSDPM'. Resolved ''; remaining name 'OraSDPM/QueueConnectionFactory'
         at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
         at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
         at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
         at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
         at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
         at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at oracle.sdpinternal.messaging.util.MessagingUtil.getQueueInfoList(MessagingUtil.java:1093)
         at oracle.sdpinternal.messaging.driver.DriverHelper.<init>(DriverHelper.java:189)
         at oracle.sdp.messaging.driver.DriverResourceAdapterBase.start(DriverResourceAdapterBase.java:300)
         at weblogic.connector.security.layer.AdapterLayer.start(AdapterLayer.java:980)
         at weblogic.connector.common.RAInstanceManager.initialize(RAInstanceManager.java:1185)
         at weblogic.connector.common.RAInstanceManager.<init>(RAInstanceManager.java:352)
         at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:197)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    Anyone knows how can I resolve this error?..
    Regards.
    PD: Sorry, but there is sentences in Spanish language.

    Hi, here you can see my config.xml and a xml file which are in the $DOMAIN_HOME/config/jms/ folder. I have split the config.xml in several parts because it exceeds the maximun length.
    Config.xml part I:
    <?xml version='1.0' encoding='UTF-8'?>
    <domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
    <name>npnode2</name>
    <domain-version>10.3.3.0</domain-version>
    <security-configuration>
    <name>npnode2</name>
    <realm>
    <sec:authentication-provider xsi:type="wls:default-authenticatorType">
    <wls:use-retrieved-user-name-as-principal>true</wls:use-retrieved-user-name-as-principal>
    </sec:authentication-provider>
    <sec:authentication-provider xsi:type="wls:default-identity-asserterType">
    <sec:active-type>AuthenticatedUser</sec:active-type>
    </sec:authentication-provider>
    <sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
    <sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
    <sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
    <sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
    <sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
    <sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
    <sec:name>myrealm</sec:name>
    <sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
    <sec:name>SystemPasswordValidator</sec:name>
    <pas:min-password-length>8</pas:min-password-length>
    <pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
    </sec:password-validator>
    </realm>
    <default-realm>myrealm</default-realm>
    <credential-encrypted>{AES}TvOXKMlehQtZcaRHQ/gQVlgYjxTmuP2CzlEJz9qrFh3uR07iZ+i8EGIA07v0wMPvmzqZi1A2iurkHF8xJHrn+4jPlQsyhKeRHIATxpxFScUXcGm/6ap/gt78jMklop90</credential-encrypted>
    <node-manager-username>weblogic</node-manager-username>
    <node-manager-password-encrypted>{AES}UPT4LnwZgpkqKzgV/1Li+OoD2dj2d/J7kG4dELlPPoi=</node-manager-password-encrypted>
    </security-configuration>
    <server>
    <name>AdminServer</name>
    <listen-address></listen-address>
    <server-diagnostic-config>
    <name>AdminServer</name>
    <diagnostic-context-enabled>true</diagnostic-context-enabled>
    </server-diagnostic-config>
    </server>
    <server>
    <name>soa_server1</name>
    <ssl>
    <name>soa_server1</name>
    <listen-port>8002</listen-port>
    </ssl>
    <machine>LocalMachine</machine>
    <listen-port>8001</listen-port>
    <listen-address></listen-address>
    <server-diagnostic-config>
    <name>soa_server1</name>
    <diagnostic-context-enabled>true</diagnostic-context-enabled>
    </server-diagnostic-config>
    </server>
    <embedded-ldap>
    <name>npnode2</name>
    <credential-encrypted>{AES}wcwM9xWQy3NNzRzOEYbyOJq9JAPOo9HGL6EOylMeseZhLZLidXviUnNstKZbrnsu</credential-encrypted>
    </embedded-ldap>
    <configuration-version>10.3.3.0</configuration-version>
    <app-deployment>
    <name>FMW Welcome Page Application#11.1.0.0.0</name>
    <target>AdminServer</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/fmw-welcome.ear</source-path>
    <deployment-order>5</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>DMS Application#11.1.1.1.0</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.war</source-path>
    <deployment-order>5</deployment-order>
    <security-dd-model>CustomRoles</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>wsil-wls</name>
    <target>AdminServer,soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.webservices_11.1.1/wsil-wls.ear</source-path>
    <deployment-order>5</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>FileAdapter</name>
    <target>soa_server1</target>
    <module-type>rar</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/connectors/FileAdapter.rar</source-path>
    <deployment-order>321</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>DbAdapter</name>
    <target>soa_server1</target>
    <module-type>rar</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/connectors/DbAdapter.rar</source-path>
    <deployment-order>322</deployment-order>
    <plan-dir xsi:nil="true"></plan-dir>
    <plan-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/Plan.xml</plan-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>JmsAdapter</name>
    <target>soa_server1</target>
    <module-type>rar</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/connectors/JmsAdapter.rar</source-path>
    <deployment-order>323</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>AqAdapter</name>
    <target>soa_server1</target>
    <module-type>rar</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/connectors/AqAdapter.rar</source-path>
    <deployment-order>324</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>FtpAdapter</name>
    <target>soa_server1</target>
    <module-type>rar</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/connectors/FtpAdapter.rar</source-path>
    <deployment-order>325</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>SocketAdapter</name>
    <target>soa_server1</target>
    <module-type>rar</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/connectors/SocketAdapter.rar</source-path>
    <deployment-order>326</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>MQSeriesAdapter</name>
    <target>soa_server1</target>
    <module-type>rar</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/connectors/MQSeriesAdapter.rar</source-path>
    <deployment-order>327</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>OracleAppsAdapter</name>
    <target>soa_server1</target>
    <module-type>rar</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/connectors/AppsAdapter.rar</source-path>
    <deployment-order>328</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>OracleBamAdapter</name>
    <target>soa_server1</target>
    <module-type>rar</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/connectors/OracleBamAdapter.rar</source-path>
    <deployment-order>329</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>wsm-pm</name>
    <target>soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.wsm.pm_11.1.1/wsm-pm.ear</source-path>
    <deployment-order>5</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>usermessagingserver</name>
    <target>soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/communications/applications/sdpmessagingserver.ear</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>usermessagingdriver-email</name>
    <target>soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/communications/applications/sdpmessagingdriver-email.ear</source-path>
    <deployment-order>200</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>usermessagingdriver-xmpp</name>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/communications/applications/sdpmessagingdriver-xmpp.ear</source-path>
    <deployment-order>202</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>usermessagingdriver-smpp</name>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/communications/applications/sdpmessagingdriver-smpp.ear</source-path>
    <deployment-order>203</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>usermessagingdriver-voicexml</name>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/communications/applications/sdpmessagingdriver-voicexml.ear</source-path>
    <deployment-order>204</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>em</name>
    <target>AdminServer</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/user_projects/applications/npnode2/em.ear</source-path>
    <deployment-order>400</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>soa-infra</name>
    <target>soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/applications/soa-infra-wls.ear</source-path>
    <deployment-order>350</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>worklistapp</name>
    <target>soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/applications/worklist-wls.ear</source-path>
    <deployment-order>312</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>b2bui</name>
    <target>soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/applications/soa-infra-b2bui-wls.ear</source-path>
    <deployment-order>313</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>DefaultToDoTaskFlow</name>
    <target>soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/applications/DefaultToDoTaskFlow.ear</source-path>
    <deployment-order>314</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <app-deployment>
    <name>composer</name>
    <target>soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/applications/soa-composer.ear</source-path>
    <deployment-order>315</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    <library>
    <name>oracle.jrf.system.filter</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/system-filters.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.wsm.seedpolicies#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.wsm.policies_11.1.1/wsm-seed-policies.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.jsp.next#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.jsp_11.1.1/ojsp.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.dconfig-infra#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.dconfig-infra_11.1.1.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>orai18n-adf#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.nlsgdk_11.1.0/orai18n-adf.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>adf.oracle.domain#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.adf.model_11.1.1/adf.oracle.domain.ear</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.adf.dconfigbeans#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.adf.dconfigbeans_11.1.1.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.adf.management#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.adf.management_11.1.1/adf-management.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>adf.oracle.domain.webapp#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.adf.view_11.1.1/adf.oracle.domain.webapp.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>jsf#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/wlserver_10.3/common/deployable-libraries/jsf-1.2.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>jstl#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/wlserver_10.3/common/deployable-libraries/jstl-1.2.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>UIX#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.uix_11.1.1/uix11.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>ohw-rcf#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.help_5.0/ohw-rcf.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>ohw-uix#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.help_5.0/ohw-uix.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.pwdgen#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/oracle_common/modules/oracle.pwdgen_11.1.1/pwdgen.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.rules#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.rules_11.1.1/rules.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.webcenter.composer#[email protected]</name>
    <target>AdminServer</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/webcenter/modules/oracle.webcenter.framework_11.1.1/oracle.webcenter.composer.war</source-path>
    <deployment-order>300</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.webcenter.skin#[email protected]</name>
    <target>AdminServer</target>
    <module-type>ear</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/webcenter/modules/oracle.portlet.server_11.1.1/oracle.webcenter.skin.ear</source-path>
    <deployment-order>300</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.workflow.wc#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.workflow_11.1.1/oracle.soa.workflow.wc.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.rules_editor_dc.webapp#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.rules_editor_dc.webapp_11.1.1/oracle.soa.rules_editor_dc.webapp.war</source-path>
    <deployment-order>306</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.rules_dict_dc.webapp#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.rules_dict_dc.webapp_11.1.1/oracle.soa.rules_dict_dc.webapp.war</source-path>
    <deployment-order>306</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.bpm.mgmt#[email protected]</name>
    <target>AdminServer</target>
    <source-path>/opt/Oracle/Middleware/oracle_common/bpm/modules/oracle.bpm.mgmt_11.1.1/oracle.bpm.bpmn-em-tools.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>emai</name>
    <target>AdminServer</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/sysman/archives/applications/11_1_1_0_0_emai.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.sdp.messaging#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/communications/modules/oracle.sdp.messaging_11.1.1/sdpmessaging.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.sdp.client#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/communications/modules/oracle.sdp.client_11.1.1/sdpclient.jar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>emas</name>
    <target>AdminServer</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/sysman/archives/applications/11_1_1_0_0_emas.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>emcore</name>
    <target>AdminServer</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/oracle_common/sysman/archives/applications/11_1_1_0_0_emcore.war</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.bpel#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.bpel_11.1.1/oracle.soa.bpel.jar</source-path>
    <deployment-order>301</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.worklist#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.worklist_11.1.1/oracle.soa.worklist.jar</source-path>
    <deployment-order>302</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.workflow#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.workflow_11.1.1/oracle.soa.workflow.jar</source-path>
    <deployment-order>303</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.mediator#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.mediator_11.1.1/oracle.soa.mediator.jar</source-path>
    <deployment-order>304</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.composer.webapp#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.composer.webapp_11.1.1/oracle.soa.composer.webapp.war</source-path>
    <deployment-order>306</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.ext#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.ext_11.1.1/oracle.soa.ext.jar</source-path>
    <deployment-order>307</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.b2b#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.b2b_11.1.1/oracle.soa.b2b.jar</source-path>
    <deployment-order>308</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <library>
    <name>oracle.soa.worklist.webapp#[email protected]</name>
    <target>AdminServer,soa_server1</target>
    <module-type>war</module-type>
    <source-path>/opt/Oracle/Middleware/Oracle_SOA1/soa/modules/oracle.soa.worklist.webapp_11.1.1/oracle.soa.worklist.webapp.war</source-path>
    <deployment-order>309</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </library>
    <machine>
    <name>LocalMachine</name>
    <node-manager>
    <name>LocalMachine</name>
    <listen-address>localhost</listen-address>
    </node-manager>
    </machine>
    <jms-server>
    <name>SOAJMSServer</name>
    <target>soa_server1</target>
    <persistent-store>SOAJMSFileStore</persistent-store>
    </jms-server>
    <jms-server>
    <name>UMSJMSServer</name>
    <target>soa_server1</target>
    <persistent-store>UMSJMSFileStore</persistent-store>
    </jms-server>
    <jms-server>
    <name>JMSSGPMC</name>
    <target>soa_server1</target>
    <persistent-store>FileStore-0</persistent-store>
    <hosting-temporary-destinations>true</hosting-temporary-destinations>
    <temporary-template-resource xsi:nil="true"></temporary-template-resource>
    <temporary-template-name xsi:nil="true"></temporary-template-name>
    <message-buffer-size>-1</message-buffer-size>
    <paging-file-locking-enabled>true</paging-file-locking-enabled>
    <expiration-scan-interval>30</expiration-scan-interval>
    </jms-server>
    <self-tuning>
    <work-manager>
    <name>wm/SOAWorkManager</name>
    <target>soa_server1</target>
    </work-manager>
    </self-tuning>
    <shutdown-class>
    <name>JOC-Shutdown</name>
    <target>AdminServer,soa_server1</target>
    <deployment-order>150</deployment-order>
    <class-name>oracle.ias.cache.Shutdown</class-name>
    </shutdown-class>
    <shutdown-class>
    <name>DMSShutdown</name>
    <target>AdminServer,soa_server1</target>
    <deployment-order>150</deployment-order>
    <class-name>oracle.dms.wls.DMSShutdown</class-name>
    </shutdown-class>
    <startup-class>
    <name>JRF Startup Class</name>
    <target>AdminServer,soa_server1</target>
    <deployment-order>110</deployment-order>
    <class-name>oracle.jrf.wls.JRFStartup</class-name>
    <failure-is-fatal>false</failure-is-fatal>
    <load-before-app-deployments>true</load-before-app-deployments>
    <load-before-app-activation>true</load-before-app-activation>
    </startup-class>
    <startup-class>
    <name>JPS Startup Class</name>
    <target>AdminServer,soa_server1</target>
    <deployment-order>115</deployment-order>
    <class-name>oracle.security.jps.wls.JpsWlsStartupClass</class-name>
    <failure-is-fatal>false</failure-is-fatal>
    <load-before-app-deployments>true</load-before-app-deployments>
    <load-before-app-activation>true</load-before-app-activation>
    </startup-class>

  • How to start laptop without keyboard

    MacBook (2 Ghz Intel Core Duo). Made in 2006, I believe.
    The keyboard seems to be hosed. I spilled a bit of something into it, tried to wash it out with distilled water, dried it carefully. There seems to be something wrong with the "start" key. I don't know if there are other problems because the machine won't start.
    I don't see any replacement keyboards on eBay.
    Maybe I'll try to use it with an external USB keyboard. But how to start the machine without the keyboard? The start button is built into the keyboard.
    Thanks in advance.
    Tim

    I have a question When using a macbook late 2006 with a bootcamp partitions to run Windows Vista Home Premium. And using a Itt-tech Microsoft 2007 Professional. What keys do you use to take a screen shot and print screen to Clipboard on Office Word? I new to Mac discusion forum. I bought my first mac In 1999 It was a Blue and white G3 with a 300 Mhz processor. With dial up internet!! Macs have come a long way.

Maybe you are looking for