OSSO with third party Access Management solution

Hi everyone,
I've seen some documentation about integrating Oracle Portal (protected by OSSO/OID) with OAM. Does anyone know how to do this type of integration with Sun OpenSSO 8.0 (formerly Access Manager 7.1). Is it basically the same process? What kind of custom development/work will be required on the OSSO side? Does anyone have any "lessons learned" or "watch out for xxxx" type information in this type of integration? Also, would I be required to install an agent (Policy Agent, Web Gate, Access Gate, etc) on the Oracle HTTP Server? There are currently some agents running on reverse proxies. Would these be able to pass the necessary parameters to the OHS/OSSO server, or does the agent truly need to be on the OHS?
Thank you for any information you may have regarding this.
-AJ

I am also trying Oracle EBS / Oracle SSO integration with IBM TAM and facing the same problem.
Where as IBM trace shows that user-id has been passed to backend but it never reaches the custom authentication file in http header.
But it works if I use harcoded userId in custom authentication module!
What I have noticed is, Once TAM passes the user id and before it reaches the custom java code, there is one page is being displayed (index.html) this page is autogenerated thru autoconfig utility.
I think http header reaches till this page but this html pade does not f/w the http header to custom java file.
I dont know how to modify this auto generated index.html!
Also this file has:
<META http-equiv=REFRESH content="1; URL=https://ORACLE_EBS_HOST:443/OA_HTML/AppsLogin">
this tag does a auto refresh and send the request.
What you guys think?
plz mail me if any one found any solution [email protected]
thanks in advance

Similar Messages

  • Questions with Third-Party Access Management Systems

    I was reading: http://download-east.oracle.com/docs/cd/B14099_18/idmanage.1012/b14078/tpsso.htm#i1009152
    And few questions raised in my head:
    1st: On the IPASAuthInterface implementation we're told to fetch a header that was set by the third party server. Well, if we do a redirect from that server the header does not reach the destination, what would look like the code on the client?
    2nd After oracle fetches the info needed, will it then generate the SSO_ID cookie put on the response? Where does it redirects the user afterwards?
    3rd Will this overwrite the convetional way of authentication within Oracle AS?
    Best Regards

    I am also trying Oracle EBS / Oracle SSO integration with IBM TAM and facing the same problem.
    Where as IBM trace shows that user-id has been passed to backend but it never reaches the custom authentication file in http header.
    But it works if I use harcoded userId in custom authentication module!
    What I have noticed is, Once TAM passes the user id and before it reaches the custom java code, there is one page is being displayed (index.html) this page is autogenerated thru autoconfig utility.
    I think http header reaches till this page but this html pade does not f/w the http header to custom java file.
    I dont know how to modify this auto generated index.html!
    Also this file has:
    <META http-equiv=REFRESH content="1; URL=https://ORACLE_EBS_HOST:443/OA_HTML/AppsLogin">
    this tag does a auto refresh and send the request.
    What you guys think?
    plz mail me if any one found any solution [email protected]
    thanks in advance

  • Cisco UCM with Third Party Contact Center Solution

    Hi all, hope everyone is well.
    Anyone out there running Cisco UCM with a third party contact center solution ? would love to hear your experience on this subject.
    Thanks in advance !!
    Danny

    I have not heard of any sucessful stories, which vendor are you considering and what would you not go with UCCE/UCCX?
    I used to work for Rockwell (Aspect today) which attempted to integrate their Business Contact Solution with CUCM (back on 3.3) and it worked OK for low volume calls, but never had any customer adoption.
    I have not heard of any other known ACD vendors integrating with CUCM.
    Chris

  • HRMS Integration with third party Project Management Tool

    Hi All,
    We have plans of procurring a third party Project Management Tool which needs to be integrated to existing Oracle Financials. Project Management Tool needs employee information for its functioning.
    a)Is there any API available for this purpose which exposes HR data to any third party tool?
    b)Can anyone suggest what should be the approach for such integration?
    Thanks in advance
    Regards,
    SA

    What 3rd party tool are you going to be using? You might get lucky and it might be something that Oracle has bought recently. Does this post mean you are using Oracle Projects? If so, you may want to post this question in that forum as well. At least you would limit the audience to projects oriented customers, so might get some better replies there than you will here. Food for thought.
    John Dickey

  • Integrating SAP HCM with third party Access Control System

    Hi Experts,
    We have client using SAP HCM and intend procuring an Access Control Solution to manage her people.
    What the client wants to avoid though is having to create a new employee in SAP HCM and manually creating same in the Access Control Software. Is there a way this can be automated such that upon recruitment of new staff, the data is updated in the Access Control DB which uses MS SQL? If this is possible, what is required to get this working well.
    Thanks for your support in this regard.
    Regards
    John

    For time management with the help of transaction pt80 you can download the information about employees with the help of idoc. And there are some programs a.k.a connectors that link access control systems and SAP so that you do not hire the same employee in the access control problem. You hire the employee in SAP and SAP sends the information (HR Minimaster DATA) to the related program.
    It is also do the same thing for the employees who resign. I mean if an employee is fired or resigned from the company than it is sent to the related system.
    These can be found under PDC integrated systems. You can find information about the systems from Ecohub. http://ecohub.sap.com/
    I hope this answer will help.

  • R12 iStore integration with third party content management system

    We are facing several challenges and are already a month behind for Go-Live with the iStore implementation. Hence, I wanted to check if anyone has worked on a similar setup
    1. iStore being used only for cart functionality
    2. All content, web pages are on a thrid party site
    3. iStore's deep linking is being used for cart updates
    4. We have a dmz environment and reverse proxy setup
    5. Payments is integrated
    We are finding several application errors, there is a loss during the back & forth communication between iStore & third party site. Could somebody please advise if there can be a better setup or if they have implemented a similar network topology.
    Thanks.

    Hi All,
    We are also facing same issues(Application Errors) and our setups include third party website linking, DMZ configurations and Reverse Proxy setups. Unable to know the root cause for these application errors as it was intermittent.
    Please help me on this.
    Regards

  • Integration with Third Party Project Management Software

    My company is looking for software that can be "bolted on" to Oracle Projects to provide more robust project managment functionality. We already know of two (Microsoft Project and Primavera), but we'd like to hear from other companies who may have implemented other solutions.

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by James O'Brien ([email protected]):
    My company is looking for software that can be "bolted on" to Oracle Projects to provide more robust project managment functionality. We already know of two (Microsoft Project and Primavera), but we'd like to hear from other companies who may have implemented other solutions. <HR></BLOCKQUOTE>
    James:
    I've been involved on 2 projects that included integration into Projects. On both occasions Oracle's Activity Management Gateway (AMG) was used. AMG is the open interface for Projects. We used it on one occasion with Primavera Expedition to load budgets and the WBS and on another with MS Excel to upload budget information. ODBC and AMG was used on the MS Excel project.
    Regards,
    Robert
    null

  • How to integrate single sign on with third party system

    we are in the process of implementing istore application. we already have home grown isupport application to contact support personnal for any issues. Now we are wondering how do we integrate oracle applications single sign on with our third pary system. Is there any recommendation provided by oracle to achieve the same.

    We too are in the process of implementing iStore with SSO features.
    And if you believe me it seems to me as nightmare.
    In our scenerio we are intgrating this SSO with Third party access control too (AD and Siteminder). I would request you to please respond me on the following mail id , so we can share our experince which will help us in our implementation
    [email protected]
    regards and thanks in advance
    Vikas Deep

  • Integrate Solution Manager with third party ?

    Hi All,
    We need to integrate SAP solution Manager 3.2 with third party Help Desk software. How can do that?

    check this link:
    http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm
    Ranjeet

  • Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

    Error on load: System.IO.IOException: The process cannot access the file
    '\\server1\SCANSHARED\.pdf' because it is being used by another process.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
       at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
    I faced this  error in event viewer  when users want to view documents from this third party deployed scan solution
    here I have two WFS servers  and they configured with load balancing in F5 .
    when I enable both servers in F5 I receive this error messages in 2nd server,
    when users want to view documents
    adil

    Do you have antiVirus installed on the sharepoint servers?
    These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
    are uploaded.
    Please follow this KB and exclude the folders from Scanning.
    http://support.microsoft.com/kb/952167
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Problems with third party package and file access

    I am using a third party package that allows me to decode
    multipart forms that I use to upload files to our server.
    I have been able to write my own code (JSP) that both reads and
    writes to our filesystem. However, when I try to upload a file
    using the third party package the method I am using fails with
    the following IO exception: The error message is "access is
    denied." But the files get written and are usable (even binary
    files). I have checked the directories and all the dirs I am
    writing to have read, write and execute permission.
    I have access to the code so when I duplicate the actual
    methods used for writing (FileOutputStream.write(foo)) in my
    JSP, it writes fine without exceptions. In fact, I use
    FileOutputStream.write() in other code and it works fine. My
    question is: why would FileOutputStream work in packages we have
    developed and not in a third-party package. I have added the
    codebase and filePermissions to <weblogic_home>\weblogic.policy
    without any changes.
    I am running WLS 5.1 and NT 4.0 with SP5.
    Does this problem sound familiar to anyone?
    thanks for any and all help,
    saulj

    HI Mike,
    If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
    If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
    Best Regards,
    Pratik Patel.
    Reward with points if it is of any help to you!

  • Third-Party User Management Tools

    I'm looking for recommendations for third-party user management tools that can do the following:
    - Identify and bulk-expire/no visibility users that are inactive for >XXX days
    - Identify users with auto-forward rules
    - Bulk-delete inactive accounts (from GW database only, not eDirectory accounts)
    - Maybe even bulk-move inactive/expired accounts to a "dead accounts" post office?
    I have an immediate mandate to clean up our environment, and I don't see how to do this in bulk with existing native tools. It's just one guy (me) versus 42 post offices and 23,000 user accounts...
    Thanks!

    You can create your own tools using the GroupWise Administrative Object API and the GroupWise Object API.
    Please refer to the Cool Solutions article I wrote ( shameless self promotion ) "Scripting GroupWise" - Scripting GroupWise | Novell User Communities for more information on the GroupWise Admin API. I suggest that you modify the script listUser.vbs to include domain name ( GWUser.PostOffice.Domain.Name ) , post office name ( GWUser.PostOffice.Name ), visibility ( GWUser.Visibility ) and last login date ( GWUser.MailboxLastLoginDate). You will need to run an audit report on each post office to update the MailboxLastLoginDate property. Import the output into Excel and sort / filter accordingly for analysis.
    Setting an expiration date ( MailboxExpDate ) and / or visibility ( Visibility ) is done by assigning values to the respective properties and using the commit method - e.g GWUser.Commit
    Identifying accounts with auto-forward rules can be using GroupWise Object to log into each account using a trusted application key. I posted ( more shameless self promotion ) some sample code to list proxy access in another thread - https://forums.novell.com/novell-pro....html#poststop. It is not too difficult to modify the code to iterate through rules and select those that include the action forward.
    Deleting is be done using the the delete method - e.g. GWuser.Delete(eadGW) where eadGW is constant with the value 1.
    I would advise against using the Administrative Object API to automate moving accounts. Best practices to avoid problems during moves involve running GWCheck against user objects until there are no errors. I perform structure, contents, contents with attclip and contents with deldupfolders checks until there are no error before moving accounts. There is also the issue of how many simultaneous moves the post office agents can handle. More accurately it is the number of simultaneous purges on the source post office that need to be monitored.
    If you need more help with coding let me know.
    Sincerely,
    Bryan Vandenberg
    Originally Posted by gregamy
    I'm looking for recommendations for third-party user management tools that can do the following:
    - Identify and bulk-expire/no visibility users that are inactive for >XXX days
    - Identify users with auto-forward rules
    - Bulk-delete inactive accounts (from GW database only, not eDirectory accounts)
    - Maybe even bulk-move inactive/expired accounts to a "dead accounts" post office?
    I have an immediate mandate to clean up our environment, and I don't see how to do this in bulk with existing native tools. It's just one guy (me) versus 42 post offices and 23,000 user accounts...
    Thanks!

  • SharePoint 2013 on-premises integration with third party email account

    the Email sending issue from SharePoint is causing too much time waste 
    First let me explain how our SharePoint is deployed
    Sharepoint version : 2013
    Deployment type : on-premise
    Authentication : from Domain controller also hosted locally 
    domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
    SharePoint computer name on local DNS :  sharepoint.domain.com
    OS and IIS : 2008 r2 , IIS 7.5 
    Network firewall : 25 26 ports  opened for sharepoint , both incoming and outgoing.
    Server firewall : turned off
    Email configuration Attempts by IIS 6.0 
    We tried following setting on IIS 6.0 SMTP local server properties
    In General tab
    qualified name was shown as : sharepoint.dts-solution.com
    IP assigned : sharepoint server IP  , advanced putted two entries of IP with ports as 25,26
    In Access tab
    Authentication : selected as Anonymous 
    Connection : All except below list : empty list
    Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
    in Delivery tab
    outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working 
    outbound connection: all default values and port = 25
    Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked 
    On sharepoint central management settings
    Outbound email = sharepoint.domain.com
    from and reply to address = [email protected] 
    IIS 7.5 SMTP settings 
    In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port  .
    Godaddy account 
    Our website hosted on godaddy with same name as domain.com
    open relay not possible on emails.
    Results
    After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
    success. 
    Tech Learner

    Hi,
    As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
    From SharePoint side, I'd suggest you refer to the link below to configure email integration:
    http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
    If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
    I'd recommend you contact their support engineer for more assistance:
    https://support.godaddy.com/help/category/154/email
    https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
    Thanks for the understanding.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Integration of ChaRM with third party tools

    Hi all,
    We are in the process of building the solution for Change Request Management implementation integrated with third party tool. 
    As the normal process for ChaRM is to work with the Service Desk functionality (to raise a ticket, then support message, change request, change document etc...), but what we need is create the change request, and change document directly with ChaRM without using the Service Desk functionality. 
    Did anybody come across this situation?
    Please share your experience. 
    Thanks in advance.
    Balaji

    Hi Balaji,
    there is no problem, as I understand, you want to use ChaRM without Service Desk. OK, than you create directly a Change Request in CRMD_ORDER, the transaction type you have to select is SDCR (standard transaction type), you have to approve it and then you can create a change document, it is not necessary that you start with a Service Desk ticket like SLFN.
    You need configured TMS a SolMan Project with a Maintenance Cycle, thats it (but this is enough , don't forget the customizing).
    I hope I understood you correct
    Udo

  • Integration with Third party Help Desk

    Hello,
    We need to integrate SAp solution Manager 3.2 with third party Help Desk software Like REMEDY ....
    So that messages updated in Remedy are updated with Solution manager and vice versa.
    Can we have some soltuion on that ?
    Deepti

    look here:
    <a href="http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm">http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm</a>

Maybe you are looking for