OSStatus Error = -35 while trying to 'Edit menu in Photoshop' using Encore CS6

While trying to edit my Encore CS6 menu in Photoshop I keep getting 'OSStatus Error = -35'. I contacted Adobe Support via chat and it was suggested that I add Photoshop CS6 to my computer since I use Photoshop CC. I added CS6 to my computer and I am still getting the same message. I don't see an option to tell Encore to use Photoshop CS6 instead of CC.
I am using Mac Pro (Late 2013) running Yosemite 10.10.2. I have a full Adobe Cloud membership. Not sure what other information might be pertinent here. I would greatly appreciate any help/support I can get in regards to this issue.
I've tried to use iDVD to create my menus, purely out of frustration and found that there are issues with it as well. I see that these authoring programs are not being supported or updated any longer by Adobe or Apple. I have purchased Wondershare Video Creator Ultimate to burn my dvd's but the menu options are limited at best. My goal is to create a simple custom DVD menu that looks professional using my own graphics.

This is a Mac operating system error, and not one that we see often. It is probably a reflection of permissions issues, not what version of PS you do or do not have.
Yosemite is not supported for Encore, but neither was Mavericks. Many of the issues in Mavericks appeared to be permissions. Most Adobe apps need read/write access, and those were not the defaults for the OS.
Some Mavericks users reported the following fixes their problems - I eventually assumed that somewhere in the process, it was fixing permissions. But perhaps it does more:
http://forums.adobe.com/message/6109315#6109315
And comments for these operating systems for Premiere Pro, Adobe Media Encoder, and After Effects may be helpful. (Encore does not have a support team that is active, so nothing official for it.) But there are specific bug fixes for these OSs in CC versions, so....
Monahan re Premiere permissions
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Kopriva re permissions and AE primarily:
http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

Similar Messages

Getting error while trying to edit locally the document in KM of portal.

Hi all
we have configured file server in km portal as fsdb mode in portal (ep 7 sp 14). We were able to edit locally the documents . But all of a sudden from some of the PCs we are getting the following error while trying to edit the documents.
The download of the document failed .
Is there any PC specific configuration required? For the same user we are able to edit the documents from some PCs but from another it is not working.
Thannking you.
Rajendra.

Hi,
You have to set your activex control properly. then only edit locally in KM will work.
Also check the below wiki
https://www.sdn.sap.com/irj/scn/wiki?path=/display/KMC/HowtotroubleshootproblemswithLocalEditing
Hope that helps
Raghu

HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW: The operation couldn't be completed. (OSStatus error -61.)

HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW: The operation couldn’t be completed. (OSStatus error -61.)

Hello,
I believe the issue was the external HD I purchased was not formatted for Mac . . . once I took care of that - all went well! The slide show transferred and the surprise 70th birthday party was a huge sucess. Thank you everyone!

WWC-51000 - Portal Error When Trying to Edit Menu

I upgrade Webdb2.2 to Portal 30982 When I edit the menu and go to 'Menu Customization Form Text' I get:
Failed to insert menu My Menu (WWV-15100)
The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)
The link it is trying to execute is:
http://hotsname:7778/pls/webdb3/WEBDB.wwv_menu_build.accept
What's the problem
PORTAL ERROR WHEN I TRY TO EDIT MENU WWC-51000

When I create a menu, I can go through the steps but when I get to the FINISH button I get:
The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)
The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)
The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)

Error occurred while trying to refresh edit panel "SeqEdit.ba"

I've been working on a TestStand project for a while (my first) and lately I get the following error just by clicking on a different step (and any step thereafter, even the one I was previously on):
Error occurred while trying to refresh edit panel "SeqEdit.ba":
Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
Closing TS seems to temporarily clear it out, but it will come back after a while.
Can anybody help me figure out what this is?
Thanks!

Here are my answers to the last two posts.
When and what were you doing when this error first appeared?
I'm just developing an automated test, so there's a lot of going back and forth between different subsequences filling in gaps as I go.
Does this error cause your application to crash or hang?
Once it appears, it just continues to appear each and every time I click a different step. I can still develop, but it sure is a pain. It's faster to restart TestStand so it doesn't pop up again (hopefully).
When you said "closing TS seems to temporarily clear it out, but it will come back after a while", could you quantify the amount of time it would take this error to occur again?
I haven't timed it, but it seems to take several hours. I would suspect more that it's based on the number of times I'm clicking different VIs, but I have no hard evidence.
Your error may be due to a registry error. If that is the case, I would recommend backing up your project first and then try to repair the software. You can accomplish the repair by going into Add and Remove Software from Control Panel, selecting National Instruments in the program list, choose TestStand and click on Repair. You will need to have the install CD for this.
Ah, my favorite suggestion...
Do the VIs specified in a LV steps take a long time to load when you click on the LV steps?
I'm not sure what a long time to load is. The first time LabVIEW opens, it takes a while (~30 seconds). After that, the steps typically open in about a second. I sure wish I had an SSD.
Does the error first occur when you clicking on a different LV step or the step is calling a different type of module?
I'm working exclusively with the LabVIEW adapter and the built-in steps: mainly Wait, Additional Results, If Statements, and For Loops.
Do the VIs have cluster parameters? Yes.
Are the clusters expanded when you select a different step? I had noticed that sometimes they are open and other times they aren't any more. I tried just now and after expanding a few, they all seemed to be expanded. Then I went to another subsequence that makes some of the same VI calls and they were open to begin with, then not (~5-10 VIs clicked on). I went back to the first subsequence and they were no longer open. That's interesting, but what are you looking for here?
Does the the error occur when you are using the LabVIEW Run-Time or LabVIEW Development System?
I am using the LabVIEW Professional Development System with the version indicated in my first post.
Are you running any sequences when the error occurs?
I typically run the sequence several times when debugging to make sure that the DUT responds the way I want it to. But the error has only occurred when I'm developing while clicking on a different VI after some undefined amount of time (or number of clicks).
Is it possible for you to post the sequence with some of the VIs that reproduce the problem? The VI block diagrams can be empty. I would like to see what type of controls you are using. It's a decently large application so I'm not sure you want all my code and I'm not sure I'd be able to hand it over either. (DoD contract and such.) I have defined a few (3 or 4) strict type def controls that are passed as clusters within TestStand. Other than that, most of my calls are to bench-top instruments (SigGen, SpecAn, power supplies) and a PXI switch. The other is through an RS485 connection to talk to the DUT.
One other note: This error hasn't occurred since I posted (of course, right?), but I also haven't done as much back and forth clicking of VIs. I have a hunch that it was related to the sheer number of back and forth clicks between different VIs when I was trying to get the values to be uniform among similar calls when I was setting everything up (similar parameter names in subsequences created from custom data types). I hope that helps.
Thanks!

Error message when trying to edit a menu in Photoshop.

Hi,
Having a horrible time with Encore. The latest niggle is with a menu I want to edit in Photoshop.
It's a simple four button menu with a single highlight created inside Encore. It has an animated background created in the usual way. When I try to select "Edit Menu in Photoshop" I get the following error message:
"Unable to execute script at line 0. photoshop is undefined"
I've searched the internet, found no refernce. Updated all my CS6 apps, problem remains.
Any help would be appreciated.

Hello,
That is quite unusual. Usually both programs connect to each other accurately. I was even able to use and older version of photoshop (i.e. cs5) and have encore cs6 link up to it.
Is your photoshop installation in the same directory as encore? Like "Program Files > Adobe > Encore / Photoshop" Are you using the 32bit version of photoshop or 64bit version? And what about Encore?
And can you also provide a screenshot of the error?
Thanks

An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS)

An Error Occurred while trying to join "my wireless access point"

Hi,
I've been using wireless access for a year and never had a problem connecting.
But starting yesterday I get a +*An Error Occurred while trying to join "my wireless access point", Please try again.+* Message.
I have 2 Mac's and have no problem connecting with the other one. It’s just the IMac.
I tried everything including resetting router, changing password, adding a $ to the password, accessing without password, deleting the whole air port and create a new one, but still getting the same message.
I might need to add, while I was working with the IMac I didn’t use wireless for a few hours, but when I got back to my browser I noticed that I was connected to a different wireless service. (FONFREEINTERNET if it matters) I have no idea why, since I didn’t change it.
Anyways, I tried to switch back to my access point, but it wouldn’t let me. It’ll just give me the +*An Error Occurred while trying to join "my wireless access point", Please try again.+* Message.
Funny is when I use the FONFREEINTERNET access point the internet seems to work fine.
I could look up Google without a problem, but when I tried to connect to Facebook for example it won’t let me. Instead a FONFREEINTERNET page will pop up with some options on how to pay! (by minute/or day/or week…)
I get the strange feeling that they planted some kind of bug/virus!!!
I don’t know what else to do.
Anyone knows that problem? What can I do?
Any help is greatly appreciated!
I researched on FONFREEINTERNET, there’s a spot close to my house/guess that’s the one I used…
http://maps.fon.com/ ZIP CODE 904-0113 and you’ll see a coffee pod, which is about 2 minutes walk from my house.

Hello Tesserax,
I get the same error message again...
I tried the 3 suggested steps again, but unfortunately it did not work.
After a Restart, Sleep or just the awaking from Screensaver mode I’m disconnected from my wireless Network anymore.
Even if the Computer was asleep for just a second!
I am able to fix the problem temporarily with Network Preferences → Assist me → Diagnostics
Choose Airport → Choose network → Enter Password (Even if I check safe password it’ll ask me every time) → and than usually all lights on the left menu switch from red to green and I get the popup message “A Network Change has been detected. Your Internet seems to work fine.” (similar - I’m at work and don’t remember exactly)
And it works fine…until the screensaver comes on or it sleeps again
I have the Problem with my IMac and Mini but the IMac at least remembers my password…
Any Ideas
I’m connected through a Buffalo WZR2-G300N wireless router

"An error occurred while trying to save your photo library..."

Installed iPhoto6.
Started app. It said it would take a few seconds or minutes to upgrade.
About 6 hours later after churning on thumbnails it is now claiming this error over and over with some time that goes by in between:
"An error occurred while trying to save your photo library."
"Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
It says I have 22,759 photos in Library. The Library was a subset of my images, named "iPhoto Library 2005" and it was intentionally kept below the 25,000 limit of iPhoto5.
Since Steve claims iPhoto6 can easily handle 250,000 photos, I clicked on the upgrade button with confidence. This now appears to be a mistake. Last night I was working on an iDVD for the local school and the majority of that work has simply vanished. There were 320 photos. I spent hours adding keywords, ranking, adjusting temperature, focus, exposure, etc.
Of the 320, only 16 photos survived. They are 16 in a row from the middle of the roll near the end but not at the end. The roll name was lost. The name is now just "Roll 226" and none of the photos have keywords. I know at least one of the 16 should have the keyword "DUPE" and the ranking 2 STARS since it precedes a double that I ranked 2 during a slideshow, sorted by ranking, and dragged to the DUPE keyword. All 16 should have the ACROCK keyword which I initially assigned to all photos.
Again, 304 of 320 have vanished and the 16 that remain have no keywords or rankings.
I watched the slide show in iPhoto5 three times with different music candidates so I know the keywording and rankings evaporated in iPhoto6. I also clicked ACROCK and option clicked DUPE and POOR so that all of the music program photos except dupes and poor images would vanish. I only deleted one photo so there were not a lot of changes to the library in terms of photos in it. I cannot think of any reason why the 16 chosen survived. Only two were placed in a DVD dropzone and they are scattered amongst the 16 survivors.
Also, the ACROCK and DUPE keywords are also gone while the POOR keyword added in August is in the keyword table just fine.
I exported these 320 photos last night to iDVD and tried almost all of the different themes and I dragged about 10 different photos to the dropzones, hit play, hit motion, etc.
It seems very strange that 16 photos from the middle of the pack would survive.
It seems extra odd that iPhoto5 and iDVD treated these as "established" photos, not photos hanging in the wings somewhere ready to vanish in an upgrade.
I gracefully saved and quit iDVD and iPhoto5 and there were no crashes and nothing strange happened while making the DVD. I was hoping today to try out the new themes and maybe find one that is just right for the kids. Instead, about 300 of 320 photos of the kids went bye-bye along with all the work on the photos!
I'm nervous that many more photos are missing but I will need to do a ton of checking to see what else has been deleted by the upgrade.
The user message that iPhoto6 presents is nearly useless and strange. It offers little if anything to go on in terms of a repair procedure. After saying an error has occurred, it says some recent changes could be lost but doesn't expand at all on what they may be or why.
From my experience, recently added photos, keywords, keyword assignments, rankings and maybe more can all be lost. To compound matters, before the upgrade it says that you cannot go back to the prior (working!) library in iPhoto5. Beware!
It finishes by suggesting two vague steps to take. The first is to make sure your disk has "enough" space. How much is "enough"? It doesn't say something like X GB available, Y GB needed. A user would have no clue about how much space to free up. I have over 17 GB and assumed that would be enough. I sure hope it doesn't require double the space of the existing library. I would hope it has a smarter algorithm than that since 23,000 photos at about 3 MB each maps to about 70 GB. That's a lot of "temporary" space to require to perform an upgrade. Since the upgrade/error message provide no details (unlike package installers which supposedly tell you how much space you need), users like me would have no clue if 70 GB is plenty or not enough.
I found 24 GB secretly used by iPhoto 5 for an iPod Photo Cache and a tech bulletin saying this just grows and grows without control and it can be deleted SO I wouldn't put huge hidden disk usage past iPhoto6.
The last none-to-helpful suggestion is that a user make sure that iPhoto is able to access the iPhoto Library folder. Huh?!??!?
Wouldn't this be a great thing to confirm via software before setting about on 6+ hours of work, especially if there is an error message hard-coded in the software confirming that Apple knows the result may be losing valuable customer photos and hours of work on enhancing, keywording, creating DVDs, etc.?
Of course. This appears negligent. To know that customer file loss will likely result but not checking these things out in advance before taking that risk seems like putting the cart before the horse at customers' expense & pain and certain loss of irreplaceable family photos (for the, say, 80%+ of iPhoto users that "plan" to get a backup routine established?).
I got burned in the iPhoto5 upgrade as well, losing photos, so I was sure to have a backup so it wouldn't happen again. Most I fear won't be so fortunate so be advised of the risk and work with copies of your photos only.
Also, why would iPhoto5 have all the permissions it needs to store, edit, tag and otherwise work with 320 photos added last night? Why would version 5 have plenty of permissions to use the folders and the photos in them. Why would iPhoto 6 suddenly lose those permissions or not have enough? This hardly makes any sense. The only way the permissions were set, the iPhoto libraries got created and the albums got created was by dragging a folder of images onto the albums pane in iPhoto5. So, iPhoto5 set all the permissions, everything is under one user account and there should be no surprise permissions for iPhoto6 to deal with.
It seems unbelievable that iPhoto 6 couldn't do what iPhoto 5 was doing. I never changed permissions and never touched files in the iPhoto 5 structure.
I can only guess that recently added keywords, recently added photos and recently added rankings and keyword taggings linger in some at-risk staging area that a version 6 upgrade doesn't know how to deal with. This seems like a lame way to code this app so I don't consider this a good guess but what else could it be?
Anyone else have a better hunch at a root cause?
Anyone else have an idea of a cure?
Anyone else run into this?
It sure doesn't look like there was a test case for having near 25,000 photos (an iPhoto 5 documented requirement), working with the latest roll and then doing a version 6 upgrade because it failed miserably--user data loss--without any special effort to find defects. In a former life I tested software and released software was much more difficult to break than this.
I would appreciate any other user experiences/solutions related to this problem. I am reluctant to import another 22,000 photos from iPhoto Library 2004 only to find more photos go poof without any rhyme or reason.
Thanks in advance for your help and I hope this alerts others to a potential for valuable photo loss (i.e., back up before you upgrade, verify iPhoto Library permissions--whatever that means--and have scads of disk space available assuming there's any truth to the error message!).
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

I'll check if I have copies of copies of copies. This could take a while due to the number of files.
I picked up a brand new 300 GB Western Digital hard drive thinking 20GB or so was not enough for temp files for upgrading and/or importing.
I formatted it as a mac os extended, journaled drive, not case sensitive, one full-size partition. I started iPhoto6 with the option key. I had a CF in my other WD 300 GB (with media reader). iPhoto6 asked about the photos on the card. I told it not to download those (again). Because I was holding the option key down, iPhoto6 asked if I wanted to select a different library or create one. I created one on the brand new, 100% empty 300 GB drive. I'm not sure if/where iPhoto6 creates temporary/cache files (like iPhoto iPod Cache folder) as it sets up a new library. I was hoping the empty 300 GB drive would give it ample room to load an existing iPhoto5 library.
When I dragged an old iPhoto5 Library onto the new iPhoto6 Library Album pane. I saw the "Importing..." start and it went on and on and on and... I let it run for HOURS and HOURS. When I checked around midnight, it had crashed. When I started it again, it said it had run across some huge number of stray photos.
I have no idea why iPhoto6 would have trouble importing an iPhoto5 library that was below the 25,000 photo mark for 5. This is especially bizarre since iPhoto6 claims it supports 250,000 photos!
I'll be trying to figure out if these stray photos got imported as dupes, if they lost iPhoto5 keywords, etc. I fear something different but equally bad happened since the number of photos it came up with was like 79,000--again many stray photos that didn't make it into the first import for no known reason. Since libraries in iPhoto5 were around 25,000 or less, I'm not sure what's happening.
Maybe there's a cache or temp file still created on Macintosh HD and not on the empty new 300GB drive and a bug exists for imports when space on Mac HD is "low" (i.e., under 3.5 GB). Maybe it's seeing thumbs as files it should import? Maybe it's seeing Orig and Modified images as worthy of reimporting?
I had told it not to import dupes but who knows if it goes by file name, checksum, byte-for-byte comparison, etc.
I'm not sure if I can even pull up iPhoto5 and 6 at the same time now to scroll through the libraries to see if dupes, thumbs, original/modifies/etc. are showing up to boost the count from under 25K to 79K!
Ideas? At least I know I'm not the only G5 dual user with this problem!
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

Permissions issue: An error occurred while trying to save your photo librar

I recently upgraded from a Mac mini running OS X 10.4.10 (iPhoto 08) to an iMac Core2Duo (2.4ghz) running Leopard (and also iPhoto 08).
My iPhoto library resided on an external Firewire drive when running on the Mac mini, but now that the iMac has such a large hard disk (750gb), I wanted to move my library there. I copied the library over to the Pictures folder in my user folder on the iMac and started up iPhoto, and everything seemed fine.
When iPhoto is running for any length of time, I get the following error:
*An error occurred while trying to save your photo library.*
*Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library.*
(I have over 300gb available on the disk and my library folder is approximately 40gb.)
I've repaired the permissions on the library using iPhoto's built-in mechanism (command-option while booting iPhoto) and Disk Utility. Additionally, I've used BatchMod to give my user and group full read/write/delete permissions (as posted elsewhere in the forums), but I still get the error.
Searching the forums yields other users w/ the same issues. What's the scoop? TIA!

Sean:
I just had the very same problem when I was messing with permissions and reset my unknown group to staff. I lost all write permissions in my nome folder. Here's how you can reset it for your pictures folder:
In the Terminal type in "sudo chmod -R -N " (there's a space after the N) and drag the Pictures folder into the Terminal window. Then hit the enter key. It should chug along for a couple of seconds and return a new prompt. Give iPhoto another try after that.
I had to do that for my entire home folder and it fixed the problem.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

IPhoto: An error occurred while trying to save your photo library.

"An error occurred while trying to save your photo library.
Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library."
Basically, the same issues as this thread:
http://discussions.apple.com/thread.jspa?threadID=1588998&tstart=0
I have tried the BatchMod with no luck. If it matters, this is on an external hard drive and I am the only user on this computer. Looking at the info of the library file, I have read/write/execute permissions and my group has read permissions only. I thought BatchMod would change these permissions but it doesn't seem to work.
Actually, I restarted my computer and it works now. But I am still worried it might happen again. Has anyone else encountered this problem?
Thanks.

Welcome to the Apple Discussions. If it's working now it could have been a one time hiccup. Do you backup your library on a regular basis? If not you definitely should.
If the library gets damaged/corrupted you won't lose your photos but can lose all of your organizational effort that you put into the library. If the external HD crashes then you will lose all.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

An error occured while trying to read data

Hi RoboHelpers,
While opening my main project today (large project w/ thousands of topics) my project froze twice and wasn't responding, so I forced it to close via Task Manager and deleted the CPD file, thinking it was the culprit.
I then got this error when I tried to reopen the .XJP file:
"An error occurred while trying to read data from
<D:\Hg\PcdmisQA\Pcdlrn\CoreHelp\13_hardware_topics\13_hardware_topics.fpj><1>."
I clicked OK to get past this error, and now my htms are not appearing inside the Topic List for 13_hardware_topics and the TOC links show that the topics don't exist. But the .htms do exist inside the actual directory in Windows.
I think I can fix this by importing the .htms inside 13_hardware_topics, but I'm not sure why it happened in the first place. Is there a way to just fix the .fjp file instead--if this is indeed the problem?
My 13_hardware_topics.fjp structure looks like this (sorry for the post length):
<?xml version="1.0" encoding="utf-8"?>
<rhpml majorversion="2" minorversion="0">
 <folders/>
 <topics>
 <topic>
 <name>Tool_ID.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Probe_Description.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Defining_Hardware.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Defining_Hardware_Introduction.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>List_of_Available_Tools.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Tool_Type.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Understanding_the_Probe_Utilities_dialog_box.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>use_trax_calibration.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Defining_Probes.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Use_Partial_Calibration.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Probe_File_Name.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>User_Defined_Calibration_Order_check_box.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Search_Override_I_J_K.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Optical.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Showing_an_Animated_Probe_Changer.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Using_the_Quick_Fixture_Dialog_Box.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Inserting_Quick_Fixtures.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>print_list.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>example_printout.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Defining_Machines.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Deleting_the_LOADMACHINE_Command.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Ball.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Removing_the_Animated_Machine_from_the_Graphics_Display_Window.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>collision_tolerance.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Spherical_Tool_and_Optical_Tip.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Additional_Information_on_the_Machine_s_Axes.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Probe_Setup.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>autocalibrate_probe.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Specifying_Collision_Tolerances.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Using_Existing_Quick_Fixtures.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Step_4_-_Begin_Calibration.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Step_3_-_Define_Ports.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Step_8_-_Measuring_Port_2.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Step_6_-_Measuring_Port_1.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Step_7_-_Measuring_Port_3.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Step_9_-_Review_Calibration_Results.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Displaying_Existing_Machines_in_the_Graphics_Display_Window.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Calibrating_the_FCR25_Probe_Changer.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Inserting_and_Removing_Quick_Fixtures.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Selecting_the_No_Machine_Item.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Additional_Information_on_the_Machine_s_Home_Position_area.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Deleting_the_Machine.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>defining_probe_changers.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Adding_Custom_Fixtures.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>add_tool.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>With_Averaging.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Shank_Optical_Vector_I_J_K.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Fast_Probe_Mode.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>X_Y_and_Z_Center.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Delete_Tool.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>ScanRdv.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>available_tip_types.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Thickness_of_the_ball_tip.htm</name>
 <name>PrbRdv.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Edit.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Shank_Vector_I_J_K.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Spherical_Tool_and_Ball_Tip.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>edit_probe_components.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Edit_Tool.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Spherical_Tool_and_Ball_Tip.htm</name>
 <name>To_delete_a_wrist_angle.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Probe_Setup.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Measure.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Spherical_Tool_and_Disk_Tip.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>PrbRdv.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Previewing_your_Probe_Configuration.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>use_unit_calibration_data.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>New_Angles_List_box.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>calibration_date_and_time.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Global_Used.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Individual_Angle_Data.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Spherical_Tool_and_Barrel_Shank_Tip.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>calibration_date_and_time.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Equally_Spaced_Angles_Data.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Reset_Tips.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Spherical_Tool_and_Disk_Tip.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>use_unit_calibration_data.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>dmis_label.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>add_angles.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Notes_on_the_Add_Angle_option.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Working_with_the_Angle_Grid.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>available_tip_types.htm</name>
 <name>calibration_date_and_time.htm</name>
 <name>Results.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Spherical_Tool_and_Ball_Tip.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Reset_Tips.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Diameter_Length.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Previewing_your_Probe_Configuration.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>User_Defined_Calibration_Order_check_box.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Use_Wrist_Map_If_Available_check_box.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Diameter_Length.htm</name>
 <name>Use_Wrist_Map_If_Available_check_box.htm</name>
 <name>Probe_Description.htm</name>
 <name>List_of_Available_Tools.htm</name>
 <name>Probe_File_Name.htm</name>
 <name>use_trax_calibration.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Step_2_-_Define_the_Mount_Point.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Use_Partial_Calibration.htm</name>
 <name>Probe_Description.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>autocalibrate_probe.htm</name>
 <name>Search_Override_I_J_K.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Disk.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Calibrating_the_ACR1_Probe_Changer.htm</name>
 <name>Step_1_-_Select_the_FCR25_Probe_Changer.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>example_printout.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>defining_probe_changers.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Calibrating_the_CW43_Probe_Changer.htm</name>
 <name>Optical.htm</name>
 <name>example_printout.htm</name>
 <name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
 <name>defining_probe_changers.htm</name>
 <name>Inserting_Quick_Fixtures.htm</name>
 <name>Shank.htm</name>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Step_9_-_Review_Calibration_Results.htm</name>
 <name>Additional_Information_on_the_Machine_s_Axes.htm</name>
 <name>Step_5_-_Prepare_Probe_Changer.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
 <name>Probe_Setup.htm</name>
 <name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
 <name>Step_6_-_Measuring_Port_1.htm</name>
 <name>Step_9_-_Review_Calibration_Results.htm</name>
 <name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <name>Step_6_-_Measuring_Port_1.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Inserting_and_Removing_Quick_Fixtures.htm</name>
 <name>SP600__Step_3_-_Prepare_for_Calibration.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Selecting_the_No_Machine_Item.htm</name>
 <name>Deleting_the_Machine.htm</name>
 <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
 <name>SP600__Step_6_-_Take_the_Third_Manual_Hit.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>SCP600__Step_2_-_Define_the_Mount_Point.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Showing_an_Animated_Probe_Changer.htm</name>
 <name>ACR1__Step_1_-_Select_the_ACR1_Probe_Changer.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
 <name>ACR1__Step_3_-_Define_the_Mount_Point.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>ACR1__Step_4_-_Define_Ports.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>ACR1__Step_5_-_Prepare_for_Calibration.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>ACR1__Step_6_-_Measure_Port_1.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>ACR1__Step_7_-_Measure_Port_8.htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>ACR1__Step_9_–_Measuring_Datum_Sphere_with_PEM_Extension(s)_(optional).htm</name>
 <comments></comments>
 <frameset>0</frameset>
 </topic>
 <topic>
 <name>SP600__Step_4_-_Take_the_First_Manual_Hit.htm</name>
 <name>Step_1_-_Select_the_SP600_Probe_Changer.htm</name>
 <name>ACR1_Step_10_Review_Calibration_Results.htm</name>
 </topics>
</rhpml>
Thanks,
Jared

Hi Jared.
I don't know if this is at the root cause of the error but I see that the closing </name> tag has a number of instances where there is a spurious space inside it:
<topic>
 <name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</ name>
 <comments></comments>
 <frameset>0</frameset>
</topic>
<topic>
 <name>Additional_Information_on_the_Machine_s_Home_Position_area.htm< /name>
 <comments></comments>
 <frameset>0</frameset>
</topic>
<topic>
 <name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</n ame>
 <comments></comments>
 <frameset>0</frameset>
</topic>
There are others.
The RoboColum(n)
@robocolumn
Colum McAndrew

Error occurred while trying to access desktop

Dear friends, 
I'm working with Composition Environment 7.1 trial version. 
I read some other related posts, but they don't apply to our situation. 
The problem is: while trying to login into the Portal (with any user) the following error message is displayed: 
Error occurred while trying to access desktop: "portal_content/every_user/general/defaultDesktop". The object does not exist or you are not authorized to access it. If this problem persists, contact your system administrator. 
The problem began when I deleted an Iview (generated with Visual Composer). 
When I go to the NWA developer traces I find the following stack trace: 
Exception when calling ObjectFactory for portal_content/administrator/super_admin/main_rules
[EXCEPTION]
javax.naming.NamingException
at com.sap.portal.pcm.GeneralSemanticsSrv.getDefaultContext(GeneralSemanticsSrv.java:194)
at com.sapportals.portal.resolving.sl.RulePcmObjectFactory.initialize(RulePcmObjectFactory.java:169)
at com.sapportals.portal.resolving.sl.RulePcmObjectFactory.getObjectInstance(RulePcmObjectFactory.java:68)
at com.sap.tc.pcd.proxies.JndiProxy.getObjectInstance(JndiProxy.java:69)
at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:962)
at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:742)
at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:121)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1821)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1807)
at com.sapportals.portal.resolving.sl.PcmRuleStorage$Loader.load(PcmRuleStorage.java:465)
at com.sapportals.portal.resolving.sl.PcmRuleStorage.load(PcmRuleStorage.java:160)
at com.sapportals.portal.resolving.CResolverService.getRulesInternal(CResolverService.java:314)
at com.sapportals.portal.resolving.CResolverService.resolve(CResolverService.java:208)
at com.sap.portal.desktop.DesktopService.getDesktopUrl(DesktopService.java:835)
at com.sap.portal.desktop.DesktopService.getDesktopUrl(DesktopService.java:682)
at com.sap.portal.desktop.DesktopService.getAndHangDesktop(DesktopService.java:494)
at com.sap.portal.desktop.DesktopService.getTheme(DesktopService.java:1414)
at com.sapportals.portal.prt.service.laf.LAFService.getCurrentTheme(LAFService.java:1074)
at com.sapportals.portal.prt.service.laf.LAFService.getCurrentRuntimeTheme(LAFService.java:1132)
at com.sapportals.portal.prt.service.laf.LAFService.getThemeToUseIdAndVersion(LAFService.java:1720)
at com.sapportals.portal.prt.service.laf.LAFService.getThemePartURL(LAFService.java:987)
at com.sapportals.portal.htmlb.HTMLBService.onHeadTagBegin(HTMLBService.java:138)
at com.sapportals.portal.htmlb.HTMLBService.doDocumentHook(HTMLBService.java:126)
at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:111)
at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:111)
at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:111)
at com.sapportals.portal.prt.service.document.DocumentHookService.doDocumentHook(DocumentHookService.java:133)
at com.sapportals.portal.prt.service.document.DocumentHookServiceNew.doDocumentHook(DocumentHookServiceNew.java:290)
at com.sapportals.portal.prt.connection.PortalHook.doDocumentHook(PortalHook.java:828)
at com.sap.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:613)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:203)
at com.sap.portal.prt.dispatcher.DispatcherServlet.service(DispatcherServlet.java:133)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:144)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doCached(RequestDispatcherImpl.java:517)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:356)
at com.sap.portal.navigation.Gateway.service(Gateway.java:145)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81)
at com.sap.portal.http.EnrichNavRequestFilter.doFilter(EnrichNavRequestFilter.java:49)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314 
I'll appreciate any comments or suggestions. 
Have a nice day, 
Manuel
Edited by: manudubinsky on Sep 23, 2009 4:30 PM
Edited by: manudubinsky on Sep 23, 2009 4:55 PM
Edited by: manudubinsky on Sep 23, 2009 5:15 PM

Hello there,
Another option is to create a sap* user( then no other user can login) create another user and try login.
The steps are given here
http://wiki.sdn.sap.com/wiki/display/EP/ToResetAdministratorPasswordthroughConfigTool
But I guess CE dont have config tool. so you will have to do the same steps at NWA.
If all these fail, I am afraid only option is to reinstall the Portal.
Regards,
Vivek Nidhi

Error - DBD: An error occurred while trying to load the provider for ...

Error - DBD: An error occurred while trying to load the provider for transport odbo.
Failed to load library. System error message: The specifed module could not be found.
While I am trying to create connection in universe designer to MS Analysis Services 2005.
Thank you - Ashok
Edited by: akojha on Jan 4, 2010 5:27 PM

We were having the same problem, found this note in the SAP KB
https://websmp130.sap-ag.de/sap/support/notes/1321459
Mike

Concurrency Visualizer Extension (VS2013): "An unknown error occurred while trying to start the collection process."

Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
"An unknown error occurred while trying to start the collection process."
I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.

Hi,
This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
and Team Foundation Server.
You have problems when using Concurrency Visualizer Extension, please ask in
the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

OSStatus Error = -35 while trying to 'Edit menu in Photoshop' using Encore CS6

Similar Messages

Maybe you are looking for