OST corrupt when moving Mailbox from Exchange 2010 to Exchange 2010

Anyone come across this?
Moving a mailbox on Exchange 2010 to Exchange 2013 - the outlook client wont connect, if you remove the OST and allow outlook to recreate it comes good again.
outlook client knows the mailbox has moved as it connects to the new server
Not happening to every mailbox
thak=nks

Hi,
After you move mailbox from Exchange 2010 to Exchange 2013, Outlook should still work.
Is there any error message when these affected users try to connect? If there is, please post here for further analysis.
I saw someone failed to connect to the new Exchange server after they moved mailbox, then they restarted the Microsoft Exchange Information Store service and restarted Outlook, it worked.
If you haven't tried this, you can restart the Microsoft Exchange Information Store service to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

When moving material from Uml-zone, we -zone etc.

When moving material from UML-zone, We-zone, etc. Can you get the system to generate individual SU#'s.
I have 30 items of XYZ, I want to move all 30 at one time and generate 30 individual SU#'s......Is there a way?

Yes, this is possible and standard
If you post a material document to place the stock into the interum storage type try LT06 and use the document as a refrence, you will need to maintain the LE quantity in your material masters and the system will automaticaly propose the correct number of SU when you click "palletization".
if you do not maintain the LE you can enter the qty as (for example) 60 X 3000EA / 1 x 2500EA (or whatever unit of measure you use)
This is very standard for WM and easy to do once the configuration is in place and you learn the transactions.
LT06-LT12
Edit: if this doesn't fit for your needs please provide more info about the transactions you currently use to put the stock into the WE-zone and how you are currently moving it out

I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

Try using this article to help with your iPad not showing up in iTunes---
http://support.apple.com/kb/TS1538 -This deals with the device not being recognized in iTunes for Windows
The following steps work well with iPod but i would try them for help with your iPad issue:
Try connecting your iPad to another USB port directly on the computer. Verify that you're connecting it to a high-powered USB 2.0 port on your computer to be sure iPad is getting power. If you're connecting to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPad. Also, see iPod not recognized when connected to Windows laptop over USB to be sure that your USB ports are supplying enough power.
Avoid connecting to an external USB hub. If a hub must be used, make sure the hub is USB 2.0, and that it has its own power supply. Also, make sure the hub is connected to a high-power USB 2.0 port on your computer.
If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain.

Error moving mailbox from 2003 Exchange to 2010 Exchange

Hi everyone
I am having some trouble moving a mailbox from our Exchange 2003 server and over to our Exchange 2010 server. at this point i have moved 300 users, but this one here is causing some grief. It stops at 10% Any ideas????
23/06/2012 21:35:28 [VMPRIEXCH] 'ad.DNSArrow.co.uk/Admin Accounts/RJ Admin' created move request.
23/06/2012 21:35:28 [VMPRIEXCH] 'ad.DNSArrow.co.uk/Admin Accounts/RJ Admin' allowed a large amount of data loss when moving the mailbox (250 bad items).
23/06/2012 21:35:30 [VMPRIEXCH] The Microsoft Exchange Mailbox Replication service 'VMPRIEXCH.ad.DNSArrow.co.uk' (14.2.247.1 caps:07) is examining the request.
23/06/2012 21:35:30 [VMPRIEXCH] Connected to target mailbox 'Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)', database 'SHAREDMBDB', Mailbox server 'VMPRIEXCH.ad.DNSArrow.co.uk' Version 14.2 (Build 247.0).
23/06/2012 21:35:30 [VMPRIEXCH] Connected to source mailbox 'Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)', database 'EX01\SG2\Mailbox Store SG2 C', Mailbox server 'ex01.ad.DNSArrow.co.uk' Version 6.0 (Build 7654.0).
23/06/2012 21:35:41 [VMPRIEXCH] Request processing started.
23/06/2012 21:35:41 [VMPRIEXCH] Mailbox signature will not be preserved for mailbox 'Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)'. Outlook clients will need to restart to access the moved mailbox.
23/06/2012 21:35:41 [VMPRIEXCH] Source mailbox information before the move:
Regular Items: 189917, 5.272 GB (5,660,371,162 bytes)
Regular Deleted Items: 2491, 135 MB (141,547,842 bytes)
FAI Items: 2490, 0 B (0 bytes)
FAI Deleted Items: 0, 972 B (972 bytes)
23/06/2012 21:35:49 [VMPRIEXCH] Fatal error MapiExceptionNotFound has occurred.
Error details: MapiExceptionNotFound: Unable to GetSearchCriteria. (hr=0x8004010f, ec=-2147221233)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=48]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=98][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetSearchCriteria [49]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=53]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLtidFromId [67]
Lid: 17082 ROP Error: 0x8004010F
Lid: 17505
Lid: 21921 StoreEc: 0x8004010F
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0x8004010F
Lid: 30894
Lid: 24750 StoreEc: 0x8004010F
Lid: 29358
Lid: 27950 StoreEc: 0x8004010F
Lid: 29310
Lid: 23998 StoreEc: 0x8004010F
Lid: 29329
Lid: 19729 StoreEc: 0x8004010F
Lid: 23185
Lid: 25233 StoreEc: 0x8004010F
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiContainer.GetSearchCriteria(Restriction& restriction, Byte[][]& entryIds, SearchState& state)
at Microsoft.Exchange.MailboxReplicationService.LocalFolder.Microsoft.Exchange.MailboxReplicationService.IFolder.GetSearchCriteria(RestrictionData& restriction, Byte[][]& entryIds, SearchState& state)
at Microsoft.Exchange.MailboxReplicationService.FolderWrapper.<>c__DisplayClass19.<Microsoft.Exchange.MailboxReplicationService.IFolder.GetSearchCriteria>b__18()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.FolderWrapper.Microsoft.Exchange.MailboxReplicationService.IFolder.GetSearchCriteria(RestrictionData& restriction, Byte[][]& entryIds, SearchState& state)
at Microsoft.Exchange.MailboxReplicationService.FolderRecWrapper.EnsureDataLoaded(IFolder folder, FolderRecDataFlags dataToLoad, ReportBadItemsDelegate reportBadItemsDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass4`1.<LoadFolders>b__0()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.LoadFolders[TFolderRec](FolderRecDataFlags dataToLoad, PropTag[] additionalPtags, GenericCallDelegate abortDelegate, ReportBadItemsDelegate reportBadItemsDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.GetFolderMap[TFolderRec](FolderRecDataFlags dataToLoad, PropTag[] additionalPtags, GenericCallDelegate abortDelegate, ReportBadItemsDelegate reportBadItemsDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.GetSourceFolderMap(GetFolderMapFlags flags, FolderRecDataFlags dataToLoad, GenericCallDelegate abortDelegate)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<CreateFolderHierarchy>b__2d(MailboxMover mbxCtx)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.CreateFolderHierarchy(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IFolder.GetSearchCriteria
OperationSide: Source
Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)
Search folder: 'MS-OLK-BGPooledSearchFolder28E6C24EFE39F845A1C7309FF139D54F', entryId [len=46, data=00000000ED492DE46CCB2941A6EFC600B0DC8ABD010062EB1CE91779304984F59E79C254E5430000033BC7BF0000], parentId [len=46, data=00000000ED492DE46CCB2941A6EFC600B0DC8ABD010062EB1CE91779304984F59E79C254E54300000015852B0000]
23/06/2012 21:35:50 [VMPRIEXCH] Removing target mailbox 'Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)' due to an offline move failure.
23/06/2012 21:35:50 [VMPRIEXCH] Relinquishing job.
Regards
Ronnie
Ronnie Jorgensen | MCTS Windows Server 2008

Hi ,
Maybe we can configure BadItemLimit for it .
New-MoveRequest:
http://technet.microsoft.com/en-us/library/dd351123.aspx
More information for your reference.
Can not move Exchange 2003 mailboxes to Exchange 2010:<//span>
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/89902f00-4b84-4f10-b909-121a81241c85/
Wendy Liu
TechNet Community Support
Hi Wendy
BadItemLimit is already set to 250 mails and with accept data loss
New-MoveRequest -Identity 'vquotes' -TargetDatabase "DB06" -BadItemLimit 250 -AcceptLargeDataLoss
So that is not the problem :)
Ronnie Jorgensen | MCTS Windows Server 2008

Moving mailbox from exchange 2013 back to exchange 2007 ..

Hi Guys,
I recently configured configured co-existence between exchange 2007 and exchange 2013. I moved a pilot user from exchange 2007 to exchange 2013 and now the user has issues receiving mails.
I am trying to move the user back to 2007 pending the resolution of the issue. The move status says completed but the mailbox remains in the exchange 2013 environment.
I need to return the user to an exchange 2007 mailbox database ..any ideas on what I am missing.
Thanx guys ..
~Richard
..forever is just a minute away*

Hi Richard,
Please move your mailbox from Exchange 2013 to 2007 from the Exchange 2013 admin center (EAC) and the Exchange Management Shell instead of EMC in Exchange 2007.
Then check whether the issue persists. If possible, please provide more error logs for further analysis.
Regards,
Winnie Liang
TechNet Community Support

Fatal error MapiExceptionNoSupport when moving mailbox

I am running Exchange 2010 SP3 UR7. I am migrating all Exchange 2010 mailboxes from an older Exchange 2010 mailbox server to a newer Exchange 2010 Server and all have been migrated except for one mailbox.
The local mailbox move request for this one mailbox continually fails. The error message is "Fatal error MapiExceptionNoSupport has occurred". I ran a New-MailboxRepairRequest and it did not detect any errors. I have done the following all of which
has failed:
1. Upgraded the servers to Exchange 2010 SP3 UR7.
2. Created a new mailbox database on the source mailbox server and tried to move the mailbox to it. This failed.
3. Ran an Exchange 2010 "New-MailboxRepairRequest" command on the mailbox. No errors were reported.
4. I successfully am able to export the mailbox to a pst file. I don't want to delete the mailbox, create a new mailbox, and import the pst file into it because this will break the user's Outlook profile, meeting requests, and message replies.
The only other things I can think of trying is to remove all the contents of the mailbox, try to move the empty mailbox and then import the pst file back into the mailbox. Another is to try an offline defrag on the database with the eseutil command. I am not
sure if they will help or not. I came across the ExFolders tools that lets you “clear permissions” but in looking at the permissions of the mailbox I see no issue and I am not sure what permissions I should clear.
Any ideas?
Here are the latest errors during the last move request:
12/3/2014 12:26:17 PM [CAS02] The Microsoft Exchange Mailbox Replication service 'CAS02.domain.local' (14.3.178.0 caps:07) is examining the request.
12/3/2014 12:26:17 PM [CAS02] Connected to target mailbox 'Primary (5694853d-ab91-4770-8003-8277c25cf954)', database 'MBX9DB6', Mailbox server 'MBX09.domain.local' Version 14.3 (Build 123.0).
12/3/2014 12:26:17 PM [CAS02] Connected to source mailbox 'Primary (5694853d-ab91-4770-8003-8277c25cf954)', database 'MBX3DB6', Mailbox server 'MBX03.domain.local' Version 14.3 (Build 210.0).
12/3/2014 12:26:17 PM [CAS02] Request processing started.
12/3/2014 12:26:17 PM [CAS02] Source mailbox information before the move:
Regular Items: 6685, 470.1 MB (492,892,404 bytes)
Regular Deleted Items: 3366, 467.2 MB (489,872,882 bytes)
FAI Items: 163, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
12/3/2014 12:26:18 PM [CAS02] Initializing folder hierarchy in mailbox 'Primary (5694853d-ab91-4770-8003-8277c25cf954)': 78 folders total.
12/3/2014 12:26:20 PM [CAS02] Folder hierarchy initialized for mailbox 'Primary (5694853d-ab91-4770-8003-8277c25cf954)': 78 folders total.
12/3/2014 12:26:20 PM [CAS02] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
12/3/2014 12:26:23 PM [CAS02] Stage: LoadingMessages. Percent complete: 20.
12/3/2014 12:26:31 PM [CAS02] Stage: CopyingMessages. Percent complete: 25.
12/3/2014 12:26:31 PM [CAS02] Copy progress: 0/10219 messages, 0 B (0 bytes)/937.2 MB (982,764,884 bytes).
12/3/2014 12:26:31 PM [CAS02] Messages have been enumerated successfully. 10219 items loaded. Total size: 937.2 MB (982,764,884 bytes).
12/3/2014 12:30:40 PM [CAS02] Initial seeding completed, 10219 items copied, total size 937.2 MB (982,764,884 bytes).
12/3/2014 12:30:40 PM [CAS02] Changes reported in source 'Primary (5694853d-ab91-4770-8003-8277c25cf954)': 2 changed folders, 0 deleted folders, 1 changed messages.
12/3/2014 12:30:40 PM [CAS02] Incremental Sync 'Primary (5694853d-ab91-4770-8003-8277c25cf954)' completed: 7 changed items.
12/3/2014 12:30:40 PM [CAS02] Stage: IncrementalSync. Percent complete: 95.
12/3/2014 12:30:40 PM [CAS02] Final sync has started.
12/3/2014 12:30:40 PM [CAS02] Changes reported in source 'Primary (5694853d-ab91-4770-8003-8277c25cf954)': 0 changed folders, 0 deleted folders, 0 changed messages.
12/3/2014 12:30:40 PM [CAS02] Incremental Sync 'Primary (5694853d-ab91-4770-8003-8277c25cf954)' completed: 0 changed items.
12/3/2014 12:30:44 PM [CAS02] Fatal error MapiExceptionNoSupport has occurred.
Error details: MapiExceptionNoSupport: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80040102, ec=-2147221246)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=2252]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=609][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropFXDstCopyConfig [83]
Lid: 27962 ROP: ropTellVersion [134]
Lid: 27962 ROP: ropFXDstPutBufferEx [157]
Lid: 17082 ROP Error: 0x80040102
Lid: 31329
Lid: 21921 StoreEc: 0x80040102
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 1238 Remote Context Overflow
Lid: 25044 dwParam: 0x4
Lid: 24932
Lid: 4367 StoreEc: 0x80040102
Lid: 7695 StoreEc: 0x80040102
Lid: 19936
Lid: 4559 StoreEc: 0x80040102
Lid: 21802
Lid: 19994 StoreEc: 0x80040102
Lid: 20202
Lid: 3305 StoreEc: 0x80040102
Lid: 32762 dwParam: 0xE080003
Lid: 32762 dwParam: 0xE230003
Lid: 32762 dwParam: 0xE270102
Lid: 32762 dwParam: 0xE580102
Lid: 32762 dwParam: 0xE590102
Lid: 32762 dwParam: 0xF000102
Lid: 32762 dwParam: 0xFF40003
Lid: 32762 dwParam: 0x10F4000B
Lid: 32762 dwParam: 0x10F5000B
Lid: 32762 dwParam: 0x10F6000B
Lid: 32762 dwParam: 0x20020003
Lid: 32762 dwParam: 0x20030040
Lid: 32762 dwParam: 0x300184B0
Lid: 32762 dwParam: 0x300484B0
Lid: 32762 dwParam: 0x3FE5000B
Lid: 32762 dwParam: 0x361C0102
Lid: 26346
Lid: 4073 StoreEc: 0x80040102
Lid: 28570 StoreEc: 0x80040102
Lid: 29738
Lid: 3401 StoreEc: 0x80040102
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80040102
Lid: 22630
at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.WaitUntilDataIsProcessed()
at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.ImportBuffer(Int32 opcode, Byte[] data)
at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.Flush()
at Microsoft.Exchange.MailboxReplicationService.ProgressTrackerTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.Flush()
at Microsoft.Exchange.MailboxReplicationService.FxProxyTransmitter.Microsoft.Exchange.MailboxReplicationService.IFxProxy.Flush()
at Microsoft.Exchange.MailboxReplicationService.LocalSourceFolder.Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo(IFxProxy destFolderProxy, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.<>c__DisplayClass1.<Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo>b__0()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo(IFxProxy destFolder, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.CopyFolderProperties(FolderRecWrapper folderRec, ISourceFolder sourceFolder, IDestinationFolder destFolder, FolderRecDataFlags dataToCopy)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.<>c__DisplayClass2.<>c__DisplayClass4.<FinalSyncCopyAllFolders>b__1()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.<>c__DisplayClass2.<FinalSyncCopyAllFolders>b__0(FolderRecWrapper folderRec, EnumFolderContext ctx)
at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyAllFolders()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<FinalSync>b__4d(MailboxMover mbxCtx)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 2744
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary (5694853d-ab91-4770-8003-8277c25cf954)
OpCode: TransferBuffer
DataLength: 2744
12/3/2014 12:30:44 PM [CAS02] Relinquishing job.
Steve

Lynn-Li,
Thank you for your reply. I ran Exfolders and I did find other SID's in the freebusy data folder so I did a "clear permissions" in Exfolders to reset it. I checked the calendar and those permissions were fine. Unfortunately it
still fails. It fails at 95 percent as it did before. I tried to move the mailbox to a database on the same source server and it still fails. Here is the log.
Any other ideas of where I can check?
12/8/2014 9:57:53 AM [MBX03] 'domain.local/Users/Exchange Admin' created move request.
12/8/2014 9:57:57 AM [CAS05] The Microsoft Exchange Mailbox Replication service 'CAS05.domain.local' (14.3.178.0 caps:07) is examining the request.
12/8/2014 9:57:57 AM [CAS05] Connected to target mailbox 'Primary (5694853d-ab91-4770-8003-8277c25cf954)', database 'MBX3DB1', Mailbox server 'MBX03.domain.local' Version 14.3 (Build 123.0).
12/8/2014 9:57:57 AM [CAS05] Connected to source mailbox 'Primary (5694853d-ab91-4770-8003-8277c25cf954)', database 'MBX3DB6', Mailbox server 'MBX03.domain.local' Version 14.3 (Build 210.0).
12/8/2014 9:57:57 AM [CAS05] Request processing started.
12/8/2014 9:57:58 AM [CAS05] Source mailbox information before the move:
Regular Items: 6686, 466.7 MB (489,399,991 bytes)
Regular Deleted Items: 3642, 538.3 MB (564,421,117 bytes)
FAI Items: 162, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
12/8/2014 9:57:58 AM [CAS05] Initializing folder hierarchy in mailbox 'Primary (5694853d-ab91-4770-8003-8277c25cf954)': 78 folders total.
12/8/2014 9:58:01 AM [CAS05] Folder hierarchy initialized for mailbox 'Primary (5694853d-ab91-4770-8003-8277c25cf954)': 78 folders total.
12/8/2014 9:58:01 AM [CAS05] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
12/8/2014 9:58:02 AM [CAS05] Stage: LoadingMessages. Percent complete: 20.
12/8/2014 9:58:03 AM [CAS05] Stage: CopyingMessages. Percent complete: 25.
12/8/2014 9:58:03 AM [CAS05] Copy progress: 0/10495 messages, 0 B (0 bytes)/1005 MB (1,053,820,706 bytes).
12/8/2014 9:58:03 AM [CAS05] Messages have been enumerated successfully. 10495 items loaded. Total size: 1005 MB (1,053,820,706 bytes).
12/8/2014 10:02:16 AM [CAS05] Initial seeding completed, 10495 items copied, total size 1005 MB (1,053,820,706 bytes).
12/8/2014 10:02:17 AM [CAS05] Changes reported in source 'Primary (5694853d-ab91-4770-8003-8277c25cf954)': 0 changed folders, 0 deleted folders, 0 changed messages.
12/8/2014 10:02:17 AM [CAS05] Incremental Sync 'Primary (5694853d-ab91-4770-8003-8277c25cf954)' completed: 0 changed items.
12/8/2014 10:02:17 AM [CAS05] Stage: IncrementalSync. Percent complete: 95.
12/8/2014 10:02:17 AM [CAS05] Final sync has started.
12/8/2014 10:02:17 AM [CAS05] Changes reported in source 'Primary (5694853d-ab91-4770-8003-8277c25cf954)': 0 changed folders, 0 deleted folders, 0 changed messages.
12/8/2014 10:02:17 AM [CAS05] Incremental Sync 'Primary (5694853d-ab91-4770-8003-8277c25cf954)' completed: 0 changed items.
12/8/2014 10:02:18 AM [CAS05] Fatal error MapiExceptionNoSupport has occurred.
Error details: MapiExceptionNoSupport: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80040102, ec=-2147221246)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=2257]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=481][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropFXDstCopyConfig [83]
    Lid: 27962   ROP: ropTellVersion [134]
    Lid: 27962   ROP: ropFXDstPutBufferEx [157]
    Lid: 17082   ROP Error: 0x80040102
    Lid: 31329
    Lid: 21921   StoreEc: 0x80040102
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 1238    Remote Context Overflow
    Lid: 25044   dwParam: 0x4
    Lid: 24932
    Lid: 4367    StoreEc: 0x80040102
    Lid: 7695    StoreEc: 0x80040102
    Lid: 19936
    Lid: 4559    StoreEc: 0x80040102
    Lid: 21802
    Lid: 19994   StoreEc: 0x80040102
    Lid: 20202
    Lid: 3305    StoreEc: 0x80040102
    Lid: 32762   dwParam: 0xE080003
    Lid: 32762   dwParam: 0xE230003
    Lid: 32762   dwParam: 0xE270102
    Lid: 32762   dwParam: 0xE580102
    Lid: 32762   dwParam: 0xE590102
    Lid: 32762   dwParam: 0xF000102
    Lid: 32762   dwParam: 0xFF40003
    Lid: 32762   dwParam: 0x10F4000B
    Lid: 32762   dwParam: 0x10F5000B
    Lid: 32762   dwParam: 0x10F6000B
    Lid: 32762   dwParam: 0x20020003
    Lid: 32762   dwParam: 0x20030040
    Lid: 32762   dwParam: 0x300184B0
    Lid: 32762   dwParam: 0x300484B0
    Lid: 32762   dwParam: 0x3FE5000B
    Lid: 32762   dwParam: 0x361C0102
    Lid: 26346
    Lid: 4073    StoreEc: 0x80040102
    Lid: 28570   StoreEc: 0x80040102
    Lid: 29738
    Lid: 3401    StoreEc: 0x80040102
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x80040102
    Lid: 22630
   at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.WaitUntilDataIsProcessed()
   at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.ImportBuffer(Int32 opcode, Byte[] data)
   at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.Flush()
   at Microsoft.Exchange.MailboxReplicationService.ProgressTrackerTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.Flush()
   at Microsoft.Exchange.MailboxReplicationService.FxProxyTransmitter.Microsoft.Exchange.MailboxReplicationService.IFxProxy.Flush()
   at Microsoft.Exchange.MailboxReplicationService.LocalSourceFolder.Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo(IFxProxy destFolderProxy, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.<>c__DisplayClass1.<Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo>b__0()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo(IFxProxy destFolder, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.CopyFolderProperties(FolderRecWrapper folderRec, ISourceFolder sourceFolder, IDestinationFolder destFolder, FolderRecDataFlags dataToCopy)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.<>c__DisplayClass2.<>c__DisplayClass4.<FinalSyncCopyAllFolders>b__1()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.<>c__DisplayClass2.<FinalSyncCopyAllFolders>b__0(FolderRecWrapper folderRec, EnumFolderContext ctx)
   at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
   at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
   at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyAllFolders()
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<FinalSync>b__4d(MailboxMover mbxCtx)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
   at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 2749
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary (5694853d-ab91-4770-8003-8277c25cf954)
OpCode: TransferBuffer
DataLength: 2749
12/8/2014 10:02:18 AM [CAS05] Relinquishing job.
Steve

How can I preserve the date and time of photos when moving them from iPhone to iPhoto and then to other folders on my computer?

In the past I’ve had no problem moving photos from my iPhone 4 into various folders on my computer while retaining their original date and time. I would import into iPhoto, then drag the photos from iPhoto into other folders via the Finder or Adobe Bridge (which is my principal image organizer). The original date and time of the photo would always travel with the jpeg into iPhoto and then into other folders. However, sometime during a recent session transferring photos in this way, the dates of the photos started to change at the point when I copied them out of iPhoto. Within iPhoto itself, the various original dates of the photos are retained. But in Finder and Bridge, copies of those same photos all carry the same (worthless) date: the date and time that they were imported from my iPhone. I can’t figure out what would have changed on my Mac to make it start re-dating my photos. I was happily dragging and dropping photos, and suddently I started to lose the original dates. Did I inadvertently change some settings? (I am running OS 10.6.8 and using iPhoto 8.)

(I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
Why are you using iPhoto at all? use image capture or drag and drop the photos
The problem is that the files I am copying are getting stripped of the EXIF metadata
eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
LN

Mac Mail crashed when importing Mailboxes from Eudora

Using Tiger (10.4.11) and Mac Mail 2.1.3. It always crashes when I try to import a Mailbox from Eudora. Any ideas?

I've done it without problems as a test.
Have you done any Disk or OS Maintenance lately?
How much free space do you have on the HD?
Does it always crash in the same place/time?

Computer freezes when moving files from USB, or to another partitioned HD

Hello, i've been moving files from two USB's to my Macintosh HD, and when I do that, the computer kinda freezes up, i can move the cursor, but not kinda click anywhere, and then a minute after or something, it gets normal again, but the transfer is going horribly slow. this happens when i move from Macintosh HD, to Macintosh HD 2 (a partitioned one). the files are 2 gb each USB. which means im transferring 4 gb at the time.

Neurot wrote:
I have 6 folders on my hard drive. These folders were created by downloading a bunch of rar files, then extracting them each to their own folder. I have not touched the permissions, so they should be the default of me having read/write and everyone else having read (correct me if i'm wrong).
Using two Finder windows, I drag and drop the six folders from one hard drive to another, and hold down the Apple key so that it moves instead of copies. I let go and it starts copying the files (since there is no "move", but rather a "copy and then delete").
I would recommend you don't use this method to move a lot of files between drives. it's much safer first to copy and if the copy is successful to delete the original afterward. there was a data loss bug in OS X a while back that wold sometimes lead to total loss on both the source and the target when doing this.
this bug is supposed to be long fixed but still...
How is the hard drive you are moving the files to formatted? what yo describe sometimes happens when moving a lot of stuff to or from FAT formatted drives. also, repair both drives in disk utility. repair disk, not permissions.
Message was edited by: V.K.

Moving email from gmail account to exchange account on iphone

I have two accounts set up on my iPhone4S, gmail and exchange (connected to Exchange 2010). Is it possible to move an email from the gmail account to the Exchange account? I am unable to find a way to accomplish this. I can move an email from Exchange to Gmail but not the reverse.

Have you happened to find a solution, or least and explaination for this problem?

Anyone using 4.0 Beta 5 on MAC and noticing Adobe Flash creating boxes when moving away from site where flash is used?

Just upgraded to FF 4.0 beta 5 - noticing that when I visit a new page that uses Flash, I navigate away or to other sites and the box that Flash used is blanked out and super-imposes itself over the page. That means when I move from the flash page, the only thing I can do it close the browser and reopen.
Yes, I am using 10.1 (or whatever the latest flash is for my MAC - that also has all its updates). Reverted back to FF 4.0 beta 4 and NO PROBLEM using the older beta version. HELP.

That sounds like a known problem on OS X. From the known issues section of the [http://www.mozilla.com/en-US/firefox/4.0b5/releasenotes/ Firefox 4 Beta 5 Release Notes]
"Plugin content can be rendered incorrectly leaving blank white squares over web content. Scrolling or switching tabs will often fix the problem, although sometimes you must close the tab which contains that plugin content (see [https://bugzilla.mozilla.org/show_bug.cgi?id=592453 bug 592453])"
This should be fixed in the next beta.

Email Attachments Become Corrupted When Moved to a Different Mailbox

I believe that I have stumbled upon a bug in Mountain Lion mail. Here is the set up:
Server:
Mac OS X Mountain Lion Server 10.8.2 running IMAP email service
Clients:
An assortment of Macs all running Mac OS X Mountain Lion 10.8.2 using Mail as the mail client over IMAP.
Issue:
Ever since upgrading all company Macs to Mountain Lion we have recieved complaints from people that email attachments are occationaly becoming currupted once moved to other mailboxes such as the Trash or even other IMAP folders. The symptom has not been observed to occur with other mail services such as gMail or iCloud but rather seems to be isolated to how Mountain Lion Mail handles moved emails with attachments on an IMAP service hosted on Mountain Lion server. The issue also seems to be related to PDF attachments only. We could not get the issue to reoccur with say a Pages document. The issue also does not always occur but occurs about 90% of the time.
The email essentially goes from looking normal in the inbox to containing this text in it after it has been moved to another mailbox (obviously the real thing is like a hundred pages long):
--Apple-Mail=_6C0E1272-08D2-7895-83FF-2F03EF82B31D
Content-Disposition: inline;
          filename="example.pdf"
Content-Type: application/pdf;
          x-unix-mode=0644;
          name="example.pdf"
Content-Transfer-Encoding: base64
JVBERi0xLjMKJcTl8uXrp/Og0MTGCjQgMCBvYmoKPDwgL0xlbmd0aCA1IDAgUiAvRmlsdGVyIC9G
bGF0ZURlY29kZSA+PgpzdHJlYW0KeAF1UttOwzAMfc9XnMcEaWmctkkr8cJlEncVCEjcHtAYEgjY
mOCBv8dJ13YMUFXFso+P7WO/4xTvyJrpYjKdf3zev2DxxA5nKhj+bNW+k1dk+6+E3Rnjc4QFtgMo
Ikx8qIT1uQiMCoE0OxAecQPZKIwslTq
Now if that same email, now moved into a new mailbox, apearing corupted to the Mac Mail client, is viewed from say an iPhone or iPad, the attachment appears normal. If a new Mac client is set up to read that email account that email also appears normal. This would indicate that issue does not seem to be occuring server side but however seems related to a cashe issue with the Mail client.
Temporary Fix:
Now this is not a good fix but deleting the entire /User/Library/Mail folder and forcing Mail to completely reconnect to the IMAP server and redownload all headers and attachements fixes the issue. However this only fixes the emails that once appeard corrupted to the client. Any new emails moved around will continue to get corupted. Syncronizing the mailbox does nothing to rectify the issue.
Plee for help:
Obviosuly this is a serious issue and must be rectified. We are using the most standard and Mac friendly/default set up possible (even a Mac server). Has anyone expereinced this issue or want to venture a guess on how to fix it? Does it seem like a bug in the Mail client to you? Any ideas???
I really apprecaite the help.
-Christian

Oh man! So they say "We know this is a bug and we can't fix it since Tiger" ????? This is Apple with an army of developers and they can't fix this annoying issue???? WHAT???? I think this is a not a day more problem to fix and their professional OS X Server is affected by this problem as well and they don't fix it... their own software... what a customer care!!!
Anyway it sounds ******** and the solution is the same category... if you have only one mail in the mailbox and move to an other on a certain type of server it's getting corrupted, but the rebuild process works and when you move back it will be corrupted again! They should fix this but it looks like they will never fix it... it's a shame from a big company which sells premium products.
So if you still in contact with an Apple technician and they're opened I can provide both of the server platform when the problem can be proofed. (one where the sync is ok and one where it isn't and only with one mail in it ) Please contact me and I can help!
You can try other mail softwares and they can handle the imap protocol without major problems. I tried the following ones:
- Postbox
- Thunderbird
- Sparrow
- Mail Mate
Both works very wall but any of them is so integrated as the mail app with osx. Unfortunately if you live in the apple ecosystem and own more than one mac computer you will stuck with the apple one with all of its bugs.
...since Tiger... I can't get over it...
Sorry guys I getting angry when I hear this kind of stories...

Catalog corruption when moving files in folder view

LR 1.3.1 MacOS 10.5 (although also happened with 10.4)
I've been using LR since the free beta and have over 6,000 images in my catalog. I shoot Nikon cameras almost always in RAW + JPEG. I used to add the jpegs as separate images, but now use them as my previews.
I recently became low on space on my system hard drive and attached an external FW 800 500GB disk that I decided to store my photos on. Using LR, using the folder view, I moved my images from the hard drive onto the external FW disk. Now, all the NEF's that I imported as NEF+JPEG are "corrupted". Specifically, when I look at them in Grid view, the thumbnails look "OK", however underneath the file name (eg: _DSCXXXX) it now says "JPG+JPEG" instead of "NEF+JPEG". When I go into Edit mode to look at the preview though, the initial image looks "normal" however I get a message saying "Rendering: Settings changed ..." and then the image looks ..... weird, perhaps cross processed or something, and then going back to Grid mode the thumbnail is now changed. If I say to show the file in Finder, it shows me the JPG file, not the NEF file. It's like the NEF file has disappeared. All the NEF's that I loaded without the accompanying JPEG are fine.
I had the same problem over 1 year ago and we filed a bug against LR but never heard anything back. I'm hoping that someone else has encountered this problem and can suggest how to fix the corrupted database. Otherwise, I will have to revert to a backup catalog and try "re-finding" the files on the new FW drive.
Thanks,
Janice

I'm simply using the JPEG's as previews so there is no separate "file" in LR for them so I can't delete them from LR. I suppose I could delete all the files out of the catalog and reimport them .... that sounds fun ... since they are keyworded and some are modified it makes more sense to revert to a backup and hope I can refind them. Perhaps deleting the ... Previews.lrdata file (not folder) might do it as you suggest but I'm a bit reticent just yet.
I don't want to take this thread off topic, but will have to look around a bit to find out why someone would not want to have both as "originals" as you indicate.
Thanks for taking the time to suggest,
Janice

Whole gallery disappear when moving it from another folder

Hope i can get some clues here of something i find more than strange.
I was working on Photoshop and moving some images within Bridge and i noticed my Iphoto Library was inside another subfolder, to clarify i keep it in an external drive. So i grab it (the libray) and drag it outside the other folder when i noticed i was actually copying the whole library outside.
I stop the action and i moved the library instead, then i have a message saying that it was a folder already named 'Iphoto Library' in that location (the half copy one) and if i want to replace it, i press ok to replace, then its copying into new location...a window pops up and reads -error action cannot be continue- and the my whole library disappear. No original one nor even the copy bit, gone..
I search through with every keywords, Trash, even making a search in finder for JPEG bigger than 100kb..
I am talking here about over 20,000 pictures, so it is really strange if i'm not bump even into one image at all, and how a folder can just delete itself, specially a big one like that.
It makes no sense.
Any help?

Welcome to the Apple Discussions.
Here's a tip: choose between iPhoto and Bridge. Using Bridg on photos managed by iPhoto makes it very easy to damage the iPhoto Library. So, one of the other is my first advice.
So i grab it (the libray) and drag it outside the other folder when i noticed i was actually copying the whole library outside.
When you move an item on the same volume then it just moves. When you move an item between volumes then it gets copied. This sounds like you've moved your Library from one volume to another.
Were you doing these moves with Bridge or the Finder?
o it is really strange if i'm not bump even into one image at all, and how a folder can just delete itself, specially a big one like that.
It didn't delete itself, you deleted it, I'm afraid. It sounds like you made a partial copy then copied the partial copy over the original.
Check out a file recovery software such as File Salvage
Regards
TD

Getting error Can't read from the source or disk when moving documents from one folder to another folder in the library

Hi,
When we try to move documents from one folder to another folder in the document library using "Open with explorer" getting beloe error.
Can read from the source file or disk.
The user having below permission for the Library as well as site.
Fullcontrol,Limited access--->Given directly
Read,Limited access--->Givin through the all Test grp
Contribute,Limited Access-->given through test members grp
Read,Limited access---> givin through The group grp
Could you please help me anyone....
Thanks

Hi Reddy,
If you are moving files in two libraries in different sites, then the error will occur and it is by design that there are limitations on the DAV move commands that the DAV client is respecting.
https://social.msdn.microsoft.com/Forums/en-US/6245f332-c609-4a7b-8e00-c8b5e46f7759/cant-move-files-using-windows-explorer-cant-read-from-source?forum=sharepointgeneral
If you are moving files in the same library, I recommend you to use Wireshark to reveal the error message and enable IIS
Trace Logging for Failed Requests to examine the IIS log file for troubleshooting.
https://social.msdn.microsoft.com/Forums/en-US/47cd569d-98f2-4cca-b78e-fd178c097285/cant-read-from-the-source-file-or-disk?forum=sharepointgeneralprevious
To narrow down the issue scope, I recommend you to test with another library and see if the copy in explorer can work.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

OST corrupt when moving Mailbox from Exchange 2010 to Exchange 2010

Similar Messages

Maybe you are looking for