OSX 10.10.2 Yosemite Slow Reboot Problem

Millions of mac units have been upgraded to OS X 10.10.2 Yosemite and rebooting process takes 42 seconds on average instead 20 + . The reason is still unknown
but more likely new OS X all fix the problem . It also appears that SSD macs didn't suffer from this issue so it is mainly affecting on regular hard drive base mac units.
you can do better apple ... we are waiting for new OSX...

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Similar Messages

YOSEMITE SLOW, GRAPHIC PROBLEM & MORE..

I have problem with everything in my mac. Safari is slow and lags. I need to w8 much time to open my apps like; iTunes, Steam, App store, finder and more. I have graphic problems, fps prob, yosemite need a lot of CPU and memory. Someone has the same problem? Need 7-10 min to turn on my mac. Will be resolved with an update? Sorry for my bad english, I'm italian.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Hi, I have a macbook pro 17" 2.4ghz intel core 2 duo 2007, will upgrading to Yosemite slow me down or create problems with my Iphone or other app ?

Hi, I have a macbook pro 17" 2.4ghz intel core 2 duo 2007, will upgrading to Yosemite slow me down or create problems with my Iphone or other app ?

Yes, i do not suggest upgrading right now. There is some software malfunction or glitch that spontaneously shuts down this specific model. I upgraded and it was a pain to downgrade and make my mac usable again.

Hi, since my update to OSX Yosemite, I have problems opening DW and AI CS6. A message with update to old Java SE-6 is displayed? How can I solve this problem? Thanks

Hi,since my update to OSX Yosemite,I have problems opening DW and AI CS6. A message with update to old Java SE-6 is displayed?Thx

You need to install Java SE 6 to run those programs. There has been quite a bit of discussion here about that. Something at one of these links should get you going...
Prompted to install Java SE 6 Runtime | Mac OS 10.9
Dreamweaver and Java SE 6 Runtime problem on MAC Mountain Lion OSX

Slow reboot after deleting bootcamp partition

Hello,
I was just told by a tech store that my bootcamp partition was slowing down my computer incredibly. I no longer need this partition so I went into Disk Utility, clicked the partition, and deleted it. I also had my RAM updated from 4GB to 8GB. I have an Early 2011 Macbook Pro, operating on Yosemite.
The only question I have is, when I rebooted my computer for the first time after deleting the partition, the restarting process took much longer than normal. Without the bootcamp startup, I figured the startup time would be less, when in reality, it was longer. Is there something I missed while deleting my partition, and is there a way to fix this and speed up the reboot time? If not, will this slow reboot be a one time issue?
Any comments would be appreciated!
Thanks,
Rachel

There is a hidden Recovery HD between the OS X and the deleted BC partition, which you can verify using
sudo gpt -vv -r show /dev/disk0
in OSX Terminal.
BCA does a better job by also relocating the Recovery HD appropriately and giving you a contiguous partition.
The only other method is to subsume Recovery HD in OS X partition and then re-install OS X which will rebuild Recovery HD. This does not modify any of you files, but just the OS.
You will also need to clean the Hybrid MBR which is now dangling and inappropriate for your case.

Since i upgrade to Yosemite i have problems with my Mac.

Since i upgrade to Yosemite i have problems with my Mac. Its brand new and i miss Maverics.
Yosemite is slow. The screen goes black and restart suddenly. Reports errors all the time.
How can i solve the problem and goes back to Maverics?
Please help...

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Yosemite slow on Macbook Air

Help! Seriously....
I updated to Yosemite the other day and since then my Macbook is extremely slow...
It is really annoying, especially because I have no clue what the reason could be.
I would really appreciate if anyone has an idea how to fix this.
Apple doesn´t seem to know the answer! (What a let down...)
Thank you very much for taking your time!
Some of the problems:
+ The fan is running much more often now
+ MacBook gets very warm
+ Battery drain is extremely high
+ Animations and scrolling inside OS not fluent anymore
I have already tried the following:
+ new install
+ verify disk permissions
+ SMC-Reset
+ PRAM Reset (Cmd+P+R)
Here comes my report, I really hope anyone can help me with that.
I am really disappointed of Apple... What a let down!
Problem description:
yosemite slows down macbook air
EtreCheck version: 2.0.6 (91)
Report generated 20. Oktober 2014 16:22:47 MESZ
Hardware Information: ℹ️
MacBook Air (Verified)
MacBook Air - model: MacBookAir6,2
1 1.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 6:6:5
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500,28 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 499.05 GB (172.22 GB free)
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
Startup Items: ℹ️
tap: Path: /Library/StartupItems/tap
tun: Path: /Library/StartupItems/tun
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.edb.launchd.postgresql-8.4.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.redgiantsoftware.updater.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicationHidden (/Applications/Dropbox.app)
Porthole UNKNOWNHidden (missing value)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player Support
Growl Support
Java Support
Perian Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
     13% Folder Actions Dispatcher
      6% launchd
      5% launchservicesd
      5% coreservicesd
      4% WindowServer
Top Processes by Memory: ℹ️
1.33 GB Folder Actions Dispatcher
352 MB Safari
198 MB launchd
189 MB CalendarAgent
120 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
127 MB Free RAM
3.36 GB Active RAM
3.19 GB Inactive RAM
997 MB Wired RAM
2.81 GB Page-ins
36 MB Page-outs

Had the same problem, finally realized that the FileVault Encryption was struck at 19%. Speed back up to normal after I disabled FileVault using terminal command - sudo fdesetup diable
To check whether the FileVault is the culprit, go to System Preferences --> Security & Privacy --> FileVault to see if encryption is in progress.. For me the blue bar was less than a quarter with status 'estimating time remaining'..
Then open Terminal and type in: sudo fdesetup disable
It will then ask for the admin password (to be it asked twice), then it was disabled... Back to normal life again..
Here is my terminal log for reference:
Last login: Tue Oct 21 23:05:13 on console
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ sudo fdesetup disable
Password:
Enter a password for '/':
..fdes.
FileVault has been disabled.
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is Off.

HT201222 Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

OS Yosemite Slowed My MAC DOWN!

I am new to Mac and a brand new user with Apple products. Since I upgraded to this OS Yosemite, it slowed my computer even slower than my previous windows pc. As a new user, I am very disappointed and of course I can't return my Mac now since its over the 14 days from Best Buy! Will apple fix this slow rebooting/booting issue in the very near future? Will an Apple specialist let me know if I am stuck with this expensive version of computing as if I never left PC Windows. I am pretty upset right now!
Model Name: MacBook
Model Identifi
I just purchased this Macook Pro
Model Name: MacB
Model Name: MacBook P
HELP!

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Hi. I am working on a Mac OSX 10.10.2 Yosemite. I'm working remotely with a woman who is using indesign CS8.2 I'm still on CS6.8 and can't open her files. I would like to upgrade to the latest version and I'd also like to know why these upgrades are not a

Hi. I am working on a Mac OSX 10.10.2 Yosemite. I'm working remotely with a woman who is using indesign CS8.2 I'm still on CS6.8 and can't open her files. I would like to upgrade to the latest version and I'd also like to know why these upgrades are not automatic as i pay a monthly subscription to the cloud. Thanks.

A Cloud subscription SHOULD always show you the most recent updates, so you may then choose to do the install
CC desktop lists applications as "Up to Date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
-and added step https://forums.adobe.com/thread/1529654
Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-and a Java update https://forums.adobe.com/thread/1507936
-update breaks things https://forums.adobe.com/thread/1772260
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

My mac OSX lion is now very slow, any idea why?

my mac OSX lion is now very slow, any idea why?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Slow internet problem on my iMac solved by installing Google Chrome browser

Slow internet problem on my iMac solved by installing Google Chrome. My daughter came with her macbook pro loaded with OSX 10.6.8 but running Chrome and she could open all my problem websites instantly. So fault was in Safari. Thanks for all your help. My original post has disappeared

Original post is at:
All of my pre 2012 macs extremely slow to load web pages but my son's 2014 mac and my iphone and ipad 2 load same sites instantly

Weird Slow Connectivity Problem

Hi guys
We are facing a slow connection problem and we cant seem to find an answer
as to whats happening.
Our application has
1. An app server hosting EJBs , datasources etc
2. A webserver on different box hosting servlets and command classes.
3.A Sql server 7 database on a different box.
All these boxes are on a secured network ; which means that access to them
is given on a requirement basis.
We have JSPs on the web box which get a datasource connection from the app
box to run queries against the database server.Our problem is that even to
run a very simple query ; it takes a long long time (in order of minutes)
and the same query runs lightening fast in the test environment where all
the boxes are on the same network.
We use type 4 SQL driver.We initially thought that this could be a network
problem as it doesnt make sense that the same query runs very fast on the
test boxes.But the network settings seem ok.
The network settings are this way :
Appserver box has access to database server box.
Webserver box has access to Appserver box.
So you can see that webserver doesnt have direct access to database
server.Is it needed to run queries ; since I am taking a connection from the
appserver.How does the whole business of running queries work when I take a
connection from a datasource on an app server.
I had this question posted to the BEA weblogic customer support ; but they
really couldnt help me.
Any ideas would be appreciated.
Thanks
Pankaj Vij

This has many possible troubleshooting paths. You don't mention if this is a workgroup or domain based Windows network. Checking the "Directory Access" settings as appropriate may yield the solution.
If this is a domain/active directory network the issue may lay with the machine account on the domain server.
Create a new user account on the Mac and see if the problem follows when you log in to that account and try to access the SMB share.
If the problem goes away, then you should look at the original user's startup items to see what might be launching at startup or simply move all files to the new user and delete the old account (not the preferred method).
If the problem persists with a second user on the same machine, then I'd take another Mac, boot it to target disk mode (laptop is good for this), using a firewire cable, boot the troublesome mac to the target mac and try to replicate the issue.
If issue persists, this is a network permissions issue on the server, if it goes away it is a local software issue on the Mac and a clean install of the OS may be needed if you can't locate the meddlesome settings/software.

HTC Incredible Reboot Problem - Must All Be In My Mind

Took my malfunctioning HTC Incredible to V-Experience Store for return. It had previously been declared DOA by Verizon Customer Service and identified as part of a bad batch of HTC I's on the market.....
Store Rep tried his hardest to (1) tell me that my malfunction / constant rebooting is all due to the apps I downloaded from the Market (2) the Verizon Customer Service reps don't really know what they are talking about and are too quick to declare a phone DOA (3) there are no bad Incredibles out there - just bad apps and users that don't manage them correctly.
Wow! Never thought that the 5-8 reboots a day which then locks out my touch screen was ultimately my fault. Also didn't realize that the HTC Incredible has no reboot problem that couldn't be solved by resetting it and (based on the Rep's logic), never loading another app on the phone.
A couple of points - Verizon needs to figure out the message regarding the well documented HTC I reboot problem and stay on it. Second - Every time I step into a Verizon Experience store my opinion of Verizon drops.

I hear you man I am on my FOURTH Incredible. The onyl positive is that I have not had a reboot in 3 days which is a record for me.

Hey i have this problem with my mac.. that its on its own shuts itself whenever i m using google chrome..i updated to yosemite but the problem never ended and i m experiecing unexplained shutdowns

hey i have this problem with my mac.. that its on its own shuts itself whenever i m using google chrome..i updated to yosemite but the problem never ended and i m experiecing unexplained shutdowns

Hi doctor.saddam,
If your MacBook Pro is shutting down unexpectedly, I would suggest that you troubleshoot using the steps in this article -
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

OSX 10.10.2 Yosemite Slow Reboot Problem

Similar Messages

Maybe you are looking for