OSX 10.3.9 Boot problem

Last night I was running some RAM-intensive programs for a while and my computer was getting pretty hot temperature-wise. I was running with 3.5gb of hard drive space and wasn't receiving any memory notifications (as you sometimes get when running close to HD capacity).
Then my computer froze up: pinwheel of doom....
After that my computer wouldn't boot, or get past the grey screen.
I ran disk utility and tried to repair the "Macintosh HD" volume of my hard drive. One problem was repaired, the other problem could not be repaired.
Having backed up all my files about two months ago I ran an "Archive and Install" with saved preferences. My computer booted back to OS with relative ease. I deleted my Previous System Folder and restarted my computer...
It took nearly fifteen minutes to boot and once it showed my desktop, before even the toolbar at the top or my desktop icons showed up I got another pinwheel of doom and I had to force it to shut down. What's going on?
I replaced the system folder, so it shouldn't be an OS issue. Is it possible I have a damaged hard drive? Can that be caused by the computer running at too high a temperature? If the hard drive is bad, why would I be able to re-install OSX?
Anyone have some advice?

You should run with less than 15% empty space on your hard drive otherwise you will experience problems like you just did. Don't wait for messages. A memory notification is not the same as your HD is full.

Similar Messages

MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
Robert

When you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

IMac 27 inch i7 OSX Lion will not boot up from Hard Disc

iMac 27 inch i7 OSX Lion will not boot up from Hard Disc on cold start, and cannot find wifi hardware in the machine. Restart and everything is fine. I have two machine and they behave the same. Software or hardware problem?

First of all, try a hard restart; making sure no disks are in the slot, unplug everything from your computer (keyboards, mice, etc.) and then unplug the computer itself. Leave it unplugged for a minute or two, then plug it back in and boot it up.
If that fails, reboot it while holding down the option-key on your keyboard. The screen should show a choice of which disk drive to boot from. Choose your usual drive.
If that fails, reboot it while holding down the shift-key on your keyboard. It should take a while for it to boot up, as it is destroying all connections to sources that may contain a virus.
If that fails, reboot it while holding down keys "option-command-P-R" until you hear the startup tone a second time.
If that fails, reboot it while holding down the C-key. Make sure you have inserted the installation disk before doing this step.
If that fails, reboot it while holding down the command-key and the R-key.
If that fails, please reply to this and let me know.

OSX Lion won't boot after Bootcamp installation interrupted

Hello, I started a Bootcamp installation on my OSX Lion Mac Pro. Once I realized that I could only use Windows 7, I had to hold off on the installation until I located my Windows 7 disk. I had set the Bootcamp partition size to 100 GB on a 500 GB Drive. Due to threatning weather, I shutdown the computer.
Now the OSX Lion does not boot! I have been reading much information on this topic to see about fixing the problem. I talked to Apple Support and so far it is still not working. I was able to boot using the recovery partition "Disk Utility -> First Aid -> Repair Disk". When I ran Repair Disk there were some errors reported and repaired, then OSX still not booting. I installed Lion on another drive using recovery and that works OK. I was hoping to install Lion on the original drive and still not disturb my data files like music, photos, etc. That volume with OSX is greyed out and does not mount. I am thinking that the GPT had been modified and since Windows was not installed on Bootcamp, there is no way to boot on the original drive /dev/disk2. I read about a backup GPT, so I am wondering if I can use the backup GPT to fix the boot problem.
Thoughts?
Thanks,
David

Thanks for the fast reply. Ill try this again. Did this the first time, but wouldn't boot again. I've since done a,fresh install of Lion, and it created the proper recovery partition. I didn't have this before, because I cloned my old drive, when I upgraded to an SSD drive. Didn't know about the recover partition. Ill try again, and see if I can get it to work.
Just need to figure out the driver situation, with my Nvidia Quadro Mac video. Not worth trying again, if I have to use default generic video drivers.

Macbook pro boot problem!

hi all !
I have a MacBook Pro 15" Model A1260 and I replaced tha logicboard because was damaged. from that time I can't install any windows version via bootcamp; everything goes fine until restart; after restarting I got this screen (see attachement). the only way to go into my OS system, is to restart again the MBP with ALT Key presed..... how can I fix this problem? thanks in advance!
L.E. this happened whith all version of OSX (original DVD Leopard, Snow Leopard, and Lion)....

Ok.
Follow in order:
Put in your OSX Install DVD.
Boot while holding C then select your language.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Then do Repair Disk.
Then try to restart normally.
Failing that, reset PRAM.
Failing that, if it were me, I'd boot back from your Install DVD & Repair Permissions on the Macintosh HD volume.
Failing that, report back so we can get some more experience in here, but I'm thinking you should be right.

OSX Mavericks won't boot after changing user home folder

Hi guys,
I have a clean install of Mavericks on my macbook pro 17" and have two drives in. One is hdd (in place of superdrive) and the other is ssd where OSX is installed.
I have uset the following:
If you right-click on the User in the Users & Groups system preferences, choose "Advanced Options..."
You can then change the location of the home folder
to change location of my user home folder and set it up to be on the hdd but now OSX Mavericks won't boot. I get the progress bar on boot and it just freezes no matter how long I left it.
Can anyone help me out?
Thanks!

I managed to boot after dozen tries and restored the location of the home folder to where it was at the first place.
The thing is, on my second drive I have the whole user folder with data, settings and everything else in it and would really like to use it in the Mavericks.
I guess I could just copy it over the one in the Mavericks and it should be good?
Not sure, why this is the issue now since on previous OSX releases this home folder changing thing worked without problems :/
If anyone else have the solution for this problem please do feel free to let me know!
Thanks!

OSX gone, 9.2 boots, can't open CD to reinstall OSX

I've got a G4 Power Mac that comes with the CD drive that can only open from the monitor. Brilliant! I dragged the computer out of storage (worked fine going in) and hooked up the special monitor (more brilliance) and got a question mark. So after a few restarts, connected it via firewire to my Powerbook as a slave. Ran Disk Utilitiy and it said it was fine. It wasn't. Hooked up again and ran DiskWarrior and it bombed on the replace function. Again and again. Started it up separately and it went to OS9.2 with no way, that I could see, to open the CD drive to install OSX again.
How do you get the CD drive to open on this thing? I've been a Mac-only person since 1985 and have never been so frustrated. Did Bill Gates design this Mac?!
Message was edited by: Shaun 69E

Removing disks:
http://docs.info.apple.com/article.html?artnum=88215
When you stored the G4, did you remove the PRAM battery from the logic board? Leaving it installed means the battery drains to zero in a few weeks and can cause boot problems. One person in another forum found that a dead PRAM battery leaked during storage and the "juice" ate through parts of the logic board. Dead Mac.
Always remove the battery when storing an unpowered Mac for an extended period.

K7N2 Delta-L: Strange cold boot problem & solution

My K7N2 Delta-L has a problem cold booting when the vcore is set in the bios at 1.65v of higher. After a cold boot, you get a blank black screen. I noticed that even if you run at default speeds but set the vcore to 1.65v of higher the problem still occurs. There is no problem rebooting however.
I found the following solutions:
1. After you power up and get a blank, hit the reset button.
2. Don't unplug your PC. My PC is connected to a AVR and after I power down the PC I usually turn the AVR off. If i do this, than the computer will have a booting problem if I try to boot it up 30 minutes later or so. Now if I don't unplug it/power off the AVR than everything is fine.
I don't understand why it acts the way it does though.
Does anyone know of any other solutions?

Have you cleared the cmos. If you do be sure you have the power turned off don't move the cmos jumper with the power on.
I found that turning off power at power supply and unpluging, than turning on the computer the fans will spin just a little this drains all the power. Clear cmos 2-3 than return to
1-2 position.
Than plug the power back in and turn it back on, than try the computer again.

Mid 2006 iMac Boot Problem (Since latest firmware update)

I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
Any help would be appreciated.
Thanks!

Actually, I think it'san early 2006.

1st series iMac G5: Booting problems, kernel panics, waking from sleep...

Specifications of the iMac described: 1.8 Ghz, 1GB, 80GB, 64 Mb Nvidia VRAM, Airport, 10.5.5
Back in August 2004 my dad bought us kids an iMac G5 for ‘family use’. It had a fresh install of 10.3.5 on it and compared to the (1999) iMac G3 it replaced it was amazingly fast.
The iMac never showed any signs of probable issues, until we decided to upgrade to Leopard in January 2008. Initially, this upgrade was only meant to be able to sync with the latest iPod nano (who demanded a newer version of iTunes).
After the installation the first thing I noticed was a high CPU usage, the machine seemed slower than ever and that with 1 Gb of RAM (the minimum sys. req. for Leopard are 512 Mb of RAM). Anyway, then the real thing started, it wouldn’t turn on anymore. We brought it to an Authorized Apple Reseller, the Tech department said the Logic board had failed. The costs of the fix weren’t the worth the computer anymore, so...end of story. The iMac was indeed one of the bad series, although it hadn’t any swollen capacitors.
My dad already made up his mind and bought himself a Macbook. He then told me that if I was able to get the broken iMac fixed, I could keep it. And so, I bought an ‘as-is’ logic board on Ebay. Last weekend I installed it, and it actually seemed to work! Yet, the problems are during the startup: the first thing I see is a screen full with horizontal lines flickering all the time, like an old TV with bad signal. Mostly it won’t boot and I get the message to restart the computer (kernel panic, I got dozens of logs already!). Sometimes it got stuck during booting (grey apple screen with gear in the middle) making the fans go crazy (after a while) and sounding what others describe as a ‘jetliner taking off’ sound. Sometimes the screen remains black. Generally it takes me 5 to 10 minutes to start up properly. Maybe it’s just me but it seems like when the computer has warmed up a little (by turning on and off on and on) starting up gets smoother. I mean the startup screen suffers from less horizontal flickering lines.
During the use of Leopard, I again get high CPU usage, especially when I use multiple programs at the same time, or when starting multiple programs. My iStat Pro said once that the fans were running at 4700 rpm and the heat of the CPU was about 70 Celsius. If I really want to **** my iMac off I should play a racing game. That just totally freaks him out! These problems could probably be solved by adding more RAM. Right?
The iMac also has a sleep problem. Sometimes after lets say an hour or so, you can’t get it out of sleep mode (by manipulating keyboard and/or mouse, the sleep light stops, but the screen stays off --> only solution is to restart). What happened to me once was that it slept so long that it just got into a deep sleep by turning itself off completely!
Here’s a list of what I tried so far:
- Disk Utility: Resetting the permissions, no problems were found.
- Resetting the SMU, both on the logic board itself as by pressing the power button 5 - 8 seconds, no improvements.
- Resetting the PRAM, no improvements.
- Did the Hardware test of the original install CD, nothing was found, all good.
- Did Archive and Instal, this actually messed my system entirely, cause it wouldn't boot at all and when starting up from the Leopard installation DVD it wouldn't recognize the Macintosh HD.
- Did Archive and Instal with the original disks, this disk did recognize Macintosh HD and so I installed the original system, 10.3. Booting problems and those flickering lines are still there though.
Next phase will be erase and install, but first I want to know what you guys think about all this.
Oh eh, One more thing; The guys at Applecare (phone support) told me that the replaced logic board was also out of warranty and so they couldn’t help me. But as the man on the phone was kind, he told me to go look for a special ‘driver’ on the net. He said that the driver should be able to resolve some of the issues described. He said that I had to give in the name of the LB on google and look for results. Is this bogus? Because I haven’t found anything useful on google so far. What’s the name (rather than a number) of the LB in the first place?
I hope you guys can give me some answers. I'm kinda desperate. But I still feel there's hope...

The symptoms of a flakey power supply are sleep problems and you have done all the right things as far as resetting the SMU and PRAM. Your CPU usage can be tracked by going to Utilities>Activity Monitor - look and see what is hogging the memory. The flickering lines could also be an optical system going south.
The other thing you can do is run DiskWarrior or TechToolPro to see if you have corrupted directories. Preferential Treatment will let you check for corrupted preferences.

MSI P45 Neo-f with intermittent boot problems

Current system:
*CPU: Intel core2duo 4300 1,80GHz
Mobo: MSI P45 Neo-F LGA775
*Memory: 1 Kingston 1GB PC2-5300 667MHz DDR2 and 1 Dane-Elec 1GB PC2-5300 667MHz DDR2
Videocard: Club3D Nvidia 8800GT 512MB GDDR3
*Hard drive: 120GB IBM deskstar 7200rpm Ultra-ATA/100 (yes I realize it is known as the deathstar, but it hasn't failed so far, I do back-up because I'm paranoid
PSU: Real Silent Nexus NX-5000 500 watt
*Soundcard: Soundblaster Audigy
OS: Windows XP home, service pack 2
*Lite-on IT dvd-rom drive
*floppy disk drive
I also have 3 case fans spinning away in a marginally large Chieftec Dragon tower.
The parts I marked with an asterisk (*) are parts that I removed from my old rig and re-used.
I'll try to give a clear rundown of my problem and the steps I've taken so far.
3 days ago I acquired the P45 Neo and installed it into my system, together with the 8800GT videocard. I was still using my old PSU, a Chieftec 360watt. This PSU served me well for 7 years, but it was starting to build up noise while trying to keep up games on my old rig.
I had some trouble getting the system to boot, I tried changing some of the 4 pins wires going to the hard drive and the dvd drive. I don't know if it was luck or if I managed to divide the load properly for the system to boot. But I succeeded into booting up, got into the bios and eventually installed WinXP.
As soon as it was time to install the videocard drivers, it stopped responding. I assumed it was a power issue, since I could only install the 20pin and 4pin cpu, but my Chieftec PSU didn't have a 24pin plug to the mobo - and it needed replacing anyway! So I bought a new 500watt PSU that had all the required plugs and more wattage.
I installed the new PSU, checked every connection and pressed the power button. 'Lo and behold, the computer starts up. I install the videocard drivers and it proceeds with no problems. I try to install the soundcard, but the cd says I don't have one installed. I fix that by going to the System list and install the drivers from there. I install a firewall. By then I have successfully rebooted the computer 3 or 4 times. I decide all is well and turn off the computer. But I realize I wanted to check up something on the internet.
I press the powerbutton. The PC power light go up for just a fraction of a second. I can see the blue LED of one of the case fans switching on just as briefly - then it goes out. The computer keeps trying to turn itself on. It looks like it's hickupping to try and boot!
I turn off the PSU power on the back-side because the computer keeps trying and wait for a bit. After 10 minutes, it still doesn't work. I leave the computer for a bit and return an hour later. The computer then starts up with no problems. I turn it off after a few hours, do a reset, start it up, no problems. But then the next day it happens again.
It's pretty tough figuring out what the problem is because it looks..almost random. I considered it could be a heat issue, but sometimes it *does* start up just after it's been turned down. Checking the bios shows no strange temperature shifts.
Hope anyone can help me, because I do not want to go back to my old Asrock mobo

While powered down I cleared the cmos data, removed the Dane Elec DDR2 module and set the bios to optimized defaults. Computer restarted to WinXP with no problems (it has been off the whole night). I shut down WinXP, wait a few moments and then turn the computer back on. Alas, it won't start and starts hick-upping. I turn power off at the PSU again, so it stops.
Now I try switching out the Kingston module instead. By now the computer has been off for 10 min (while I write this entry on laptop). I press the power button on the PSU and then the power button on the front. There is a short pause, lasting a second. The computer turns on, longer now, but it only lasts 2 whole seconds before it turns off again and goes on again (I believe now you can call it powercycling). It repeats this process until I shut off the PSU.
I check to see if I have installed it properly and try again but it starts powercycling again.
15 min pass, I put the Kingston module back in, press the power button and voila, this time it does start. WinXP shows up, no problems. I leave it on for a bit and then shut down. And when I press the power button again - the feeling of dread returns, when it starts hickupping again.
I'm going to see if I can install one of the memory modules from my housemate. Then hopefully tommorrow, I'm going to try if I can test a different PSU, since I see someone else on the forum - who recently posted, has the exact same power supply and also has boot problems, coincidence... or not ^^;.

Windows 8.1 pro boot problems

I upgraded my OS on a hp pavilion g6-1d73us from windows 7 home premium to windows 8.1 pro and ever since I have had boot problems. I took all the software off since I thought that might be the problem but the boot problems persist. The computer's self diagnosis helps but I still have problems. Is my laptop incompatible with windows 8.1? Windows 8.1 was a download and I still have recovery disks for windows 7. I originally thought the problem was incompatible software but now I am not sure.

Hi @hifive11 ,
Thank you for visiting the HP Support Forums and Welcome. I am glad you have recovery disks for windows 7, smart thinking. I have looked into your issue about your HP Pavilion g6-1d73us Notebook and having issues with the Windows upgrade to 8.1. Here is a link to the drivers page for your product. I do notice there are drivers for Windows 8.The Updates you need for the system are the Chipset. These are located on the driver page link above.
One of the things that can cause an issue is things connected USB. The computer can not load the drivers so it causes an issue. Once the machine is up to date then return the USB devices.
Then I recommended to restore the BIOS to factory defaults.Here is a link to restore the BIOS.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
Please note remove any and all USB devices. Disconnect all non-essential devices.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

The mother of all re-boot problems.

Hi All,
I've got that re-boot problem that seems very common but the solutions out there aren't working.
Basically the computer will turn on, chime, grey screen comes up, shortly after apple logo, and then the gear starts turning, about 2 minutes later restart, process repeats.
I've tried.
- Booting from CD/Recovery Disk - Won't happen
- A million different key combinations, I've read about 10 different posts on key combinations and tried them all, including PRAM reset, boot from different source, etc.
Basically it's like my keyboard commands aren't being heard at all, but to test if the keyboard was working I pressed the caps lock button and the light was going on and off which tells me its powered. The only kind of input I have been able to acheive is by holding the mouse button down to eject the CD, other than that I have absolutly no control what so ever.
Would like any insight.
Cheers,
Jarrod.

HI,
If you've had your iMac for less then one year then it's covered by the one year limited warranty.
Take it to an Apple store or an Apple certified repair provider.
Carolyn
Message was edited by: Carolyn Samit

Mac Pro Boot Problems. Kona 3?

I'm having booting problems with a Mac Pro. It's got a kona 3 card in one of the PCI slots, and we've been tinkering with it to try to get the audio to work right. However, I've been having huge problems whenever I try to restart the computer. After hitting the power button, or telling it to restart the screen goes to black and sometimes I hear a chime. However, the computer does not boot any further. Then, after holding the power button down and restarting the computer, I can sometimes get the computer to boot normally.
I suspect the Kona card is causing some of the problems. I have multiple hard drives on the system, and I have the ability to boot onto two separate drives in 10.5.8. Both drives are having the same problems.
it's a 2x2.8ghz quad-core Intel Xeon with 10gb of ram. The Kona card is in slot 2. Slot 3 has also been tried, but similar problems remained.

removed kona card. uninstalled aja programs. restart problems still persisting.

OSX 10.3.9 Boot problem

Similar Messages

Maybe you are looking for