Osx 10.4.11 - can't connect to the server

Hi All-
suddenly all of my Apple applications that connect to the internet are no longer able to connect. Safari, iTunes Store, software update, dashboard widgets are all unable to successfully connect to the internet. What is weird is that Firefox, entourage, thunderbird can all successfully connect to the internet w/o problems.
this problem started yesterday and i have NOT run any software updates since the 4/21/08.
OS: 10.4.11
Safari: Version 3.1.1 (4525.18)
G5 2.5 dual core (IBM chip set)
any help or assistance on this matter would be greatly appreciated.
Thanks
bob

Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON.
See if you might have this malware redirecting DNS queries...
http://macmegasite.com/node/3924
http://www.ehow.com/how2128387remove-osxrspluga-trojan-horse-mac.html
How to fix...
http://www.macosxhints.com/article.php?story=20071031114140862
Also, beware of MacSweeper, malware itself!
See if putting these numbers in Safari's url bar works...
17.254.3.183
See if some Proxies got set in..
Network>Configure>Proxies tab.
Had another one, but forgot sorry!

Similar Messages

  • TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    -Griff W.

  • My ipod touch connects to wifi but can't connect to the server.

    Ok, so my ipod youch says it's connected to the wifi but when i try to get on the internet it says it can't connect to the server. I've looked and there's alot of answers but they're all soooooooooooooo complicated. I'm like 14, so whoever can answer this, please use small words.
    I've noticed in alot of the answers they talk about your IP adress, if it's any consilation mine starts with 169. No matter where I go, if it's at home, or at starbucks or a hotel.
    Thanks for your time

    Have you tried restoring your iPod touch in iTunes?
    You may just be trying to connect to "Printer Networks" that allow a company/residence to print something from their printer wirelessly, it would appear on your iPod touch just about the same as any other network, but you wouldn't be able to use internet while connected to that network...
    If you are talking about "free wifi" in a Cafe, like Starbucks, you will usually need to open Safari. A Page will load and tell you how to connect to their internet, whether it's by paying, or just agreeing to their terms...
    Like, I said, if that isn't the problem, try restoring your iPod touch in iTunes...
    -Messymeese
    Über Enbonpoint Pangolins FTW!

  • Lync 2010 Mobile client can't connect to the server. it may be busy or temporarily unavailable

    I have the following issue after renewed the Lync internal and external certificates, Lync Mobile client get the following message when try to connect from internal or external network "can't connect to the server. it may be busy or temporarily
    unavailable"
    PS I tried a lot of solutions from different articles, but the same result. 
    presented below my environment: 
    Two Lync 2010 frontend servers with one pool.
    Two edges server.
    HW load balancer.
    Log from Lync connectivity analyzer.
    User Name: [email protected]
    Logging test parameters:
    SIP Uri: [email protected]
    Discovery Type: Automatic Discovery
    Network access: NetworkAccessExternal
    Selected client: ApplicationLyncMobile2010
    Starting Lync server autodiscovery
    Please wait; this test may take several minutes to complete...
    Starting automatic discovery for secure (HTTPS) internal channel
    Sending HTTP request to
    https://lyncdiscoverinternal.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    https://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
    connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting, try using a browser to open the server discovery URL
    https://lyncdiscoverinternal.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for secured internal channel against
    https://lyncdiscoverinternal.xxx.com/
    Starting automatic discovery for unsecure (HTTP) internal channel
    Sending HTTP request to
    http://lyncdiscoverinternal.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    http://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
    connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
    For troubleshooting, try using a browser to open the server discovery URL
    http://lyncdiscoverinternal.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for unsecured internal channel against
    http://lyncdiscoverinternal.xxx.com/
    Starting automatic discovery for secure (HTTPS) external channel
    Sending HTTP request to
    https://lyncdiscover.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    https://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
    to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting, try using a browser to open the server discovery URL
    https://lyncdiscover.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for secured external channel against
    https://lyncdiscover.xxx.com/
    Starting automatic discovery for unsecure (HTTP) external channel
    Sending HTTP request to
    http://lyncdiscover.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    http://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
    to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
    For troubleshooting, try using a browser to open the server discovery URL
    http://lyncdiscover.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for unsecured external channel against
    http://lyncdiscover.xxx.com/
    None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
    MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
    Automatic discovery of the Lync server failed. Please verify the server requirements at
    http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
    Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.

    Hi 
    Is that Port 443 opened? check the fire wall.
    is that external Lync clients are logging in with out any issues.
    by seeing the Log it is unable to connect on port 443
    Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made
    to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting the Mobility issues follows this
    http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
    Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

  • Safari Not Loading Web Pages (Safari can't connect to the server)

    I'm seeing increasing problems with Safari being unable to connect to websites. When the problem starts to manifest itself you see the error:
    Safari can't connect to the server.
    Safari can't open the page.
    Then you see the URL information. It is always seems to be sites that are trying to load HTTPS pages.
    Clearing the cache and resetting Safari will make it go away temporarily, but it always comes back.
    Note that when this happens you might happen to see something like this in the address bar:
    file:///Applications/Safari.app/Contents/Resources/

    I'm having the same problem, I can open safari but when I try to go to a website it just says "server stopped responding." I just updated to the new version and that's when it started happening, it was working find before the update. Any suggestions???

  • *URGENT* How can i get a website to load instead of saying "Can't connect to the server"

    My computer is not loading a website. This is urgent for university work!! My computer keeps saying: "Can't connect to the server" no matter what internet browser i use, and other people with Mac's can use it fine! I need it for university work. PLEASE HELP ME!!

    Power off the router. Unplug it from the wall. Wait few minutes.
    Plug it back in. Power on the router.
    Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH11212?viewlocale=en_US
    Deselect Proxies if selected.
    Safari > Preferences > Advanced > Proxies:
    Click "Change  Settings" button
    The network preferences window for Proxies will will show up with "Proxies"
    tab selected.
    Under "Select Protocol", uncheck any box if selected.
    Click "OK", then  "Apply"

  • Apple Tv is telling me it can not connect to the server. How do I fix that?

    I changed my apple id and after I did, now my apple tv says it can not connect to the server when I try to view my purchases. Hulu and netflix work so the internet is working fine.  My phone and ipad also work fine with the new id.  Does anyone know how to make my apple tv purchases come back?

    Power cycle the router and the ATV.
    If the issue continues on the ATV go to Settings > General > Reset

  • A toolbar called Searchqu got installed in my web browsers.I uninstalled Mozilla Firefox without removing the toolbar and it stopped working saying that can't connect to the server.I uninstalled and installed Firefox but it isn't working.

    A toolbar called Searchqu got installed in my web browsers.I uninstalled Mozilla Firefox without removing the toolbar and it stopped working saying that can’t connect to the server.I uninstalled and installed Firefox but it isn’t working.

    See this thread for potential ways of removing Searchqu from your system: https://support.mozilla.com/en-US/questions/790833

  • I am not able to use iMessage, While I am trying to connect, it says 'Can not connect to the server'

    I am not able to use iMessage, While I am trying to connect, it says 'Can not connect to the server'.
    I tried to reset apple id for iMessage but now it is not accepting any apple id with gmail or icloud id.
    Kindly help

    Try here:
    iTunes Store: My credit card's security code or zip code does not match my bank's records
    Then try contacting iTunes
    Apple - Support - iTunes - Contact Us

  • Problem with Safari **Safari can't connect to the server**

    My internet is working fine, but I keep having to refresh the page because I'm always getting "safari can't connect to the server".  Same thing happens with different browsers.  I've read a couple things online and unistalled everything that I think is causing the problem but it's still happening frequently.  Any help would be greatly appreciated!

    Most school networks are closed networks. You can access their Intranet, with all the files and peripherals and everything, but you need to have a specific password or IP address to access any outside connection. I have an ibook G4 that's 3 years old. I used it in high-school to access AOL wirelessly. That was before closed and protected networks were prefered. It shouldn't matter if the school intranet is widows based or not. You need to access your own internet service sometimes in order to get any reaction. If you simply use safari, you might only be connecting to the schools intranet, which only links together the schools computers and keeps the system isolated. Also, you need to check your firewall settings, in fact, just turn off the firewall. The schools sytem is firewalled up the bum and you shouldn't get attacks anyway because you're running the mac os.
    You might also try an alternative approach. Go into a computer lab, access one of the systems, then go to control panels and look up every connection you can find. Take down all of the info and then see which matches up with similar info on your mac. Then go to another pc and look up the same info again. Is it different? How? Then take that listing to the system administrator and show them. They may not know that a mac has a simpler interface than the pc, so you may have to do some prodding to get them to take a look. If they still tell you it wont work, you could try boot-camp or a virtualizer (to let you run windows alongside the mac os). If you use a virtualizer, you can get your own copy of windows and then share it's connection to the main system to the mac.

  • Can't connect to the server

      my apple TV second generation can not connect to the Itunes store. I keep getting a message saying. Apple TV can't Connect to the server at this time. Please try later. Is it on my end or is there an issue on Apples side? I can see previews and such but can not buy or rent anything

    I have four Apple TV's in my home, and I get this message all the time. What is intersting, is when it occurs on one,it occurs on ALL four simultaneously. We also have two iMacs, two iPads, and three iPhones, all use the same apple I'd and password, those other devices connect to iTunes just fine when this occurs with the TV's.  I too can also watch previews, use Netflix, etc.
    It is clearly a gremlin specific to iTunes and Apple TV's, and your account.  Re booting the TV does work.
    I am forever rebooting Apple TV's, as well as forever returning them for free replacements as they experience a variety of problems, locked screens, failure to pair with a remote, etc.
    Apple knows the fix for this is a reboot, so why is that not an express lane answer??
    Very frustrating devices, ITunes does have the best content, and the highest prices. But I suggest use your apple tv for watching Netflix at $8 / month rather than $5 / movie.  Especially when they do not seem to care enough to fix bugs like this so we can enjoy the pleasure of overspending for their content without extreme frustration.
    Imagine three kids with Apple TV's in their room. (we do not have cable). A thousand "Dad, can you come fix my Apple TV again".
    Signed, the 24 hour on call IT man because I was stupid enough to invest in so much apple product.
    Bottom line? Anytime anything goes wrong with your Apple TV, it's not you as long as you have Internet, it's Apple, reboot when in doubt, or unplug and replug, even better.

  • TS3623 If the screen says Unable to Sign in-Apple TV can't connect to the server at this time. please try later.  I've been getting this reading for about a week

    My screen has been reading for about a week: Unable to Sign In, Apple TV can't connect to the server at this time.  Please try later.  What do I do to get pass this screen.  I purchased a movie series season from HBO and I can't watch it because I can't pass this screen.

    Hi Kailik Hunter,
    Thanks for using Apple Support Communities.  This article has some steps you can try if you're unable to sign in to your Apple TV and continue with setup:
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/ht1551
    If you are still having trouble, you can try to reset your equipment by unplugging Apple TV, your television, your wireless networking equipment or AirPort Base Station, and your router from their power outlet. Wait 30 seconds, then plug everything back in.
    Cheers,
    - Ari

  • HT204400 Apple TV can not connect to the server at this time

    I keep getting this message when I try to buy or rent movies?  I can select movies and watch previews but when trying to buy/rent I get this error message: Apple TV can not connect to the server at this time.  I have a great WiFi connection.  Help

    Apple TV can't connect to the server at this time. Please try later.
    This is the message of yesterday . I try to access my account and I can not. What is the problem?
    AppleTV 2

  • "apple tv can't connect to the server at this time. please try later."

    anybody else getting this error on apple tv after upgrading? 'unable to sign in' 'apple tv can't connect to the server at this time. please try later.'
    • I was happily watching all itunes media on my apple tv but then apple tv asked me to upgrade.
    • I upgraded.
    • Now it can't connect to any menus related to the itunes store.
    • I verified I have the latest upgrade to itunes.
    • Homesharing is turned on.
    • I have restarted apple tv numerous times.
    • I CAN'T watch or listen to itunes 'movies', 'tv shows', 'music', 'podcasts'  via apple tv.
    • I CAN watch netflix, youtube, movies on my mac, itunes radio.
    • I CAN connect to the itunes store via my mac.
    • I get this error on apple tv 'unable to sign in' 'apple tv can't connect to the server at this time. please try later.'

    Lets be frank:  this is an internal server communication issue at Apple that they don't want to fix or acknowledge.    This "unable to sign in" or unable to communicate issues are all about purchase validation ONLY.  That is where it hangs up.   For example, I can see favorites but it won't access my list of purchased items.     And yet - the only advice they have is reboot?
    The same issue happens when trying to watch Netflix on ATV.   It can't connect to the Netflix server but gosh golly gee, I switch to my Roku box and no problem.   Unfortunately for Apple, while I'm over there I'm starting to to buy movies and shows from Amazon
    Apple doesn't make it's money from the $99 Apple TV sale - it's the iTunes purchases.   If we want them to listen we need to interrupt that revenue stream.

  • My contacts will not appear on my computer and when I go to the webpage for Icloud, it says that I can't connect to the server.

    My contacts will not appear on my computer and when I go to the webpage for Icloud, it says there is an error and that I can't connect to the server. (which may have something to do with the facts that my contacts have disappeared.)

    giddeonsmom wrote:
    i have a iphone 3g i have been tryin for 2 hours to sync the music on my phone to a new computer without it erasing everything. can someone please help me
    The iphone is not a storage device.
    The music sync is one way - computer to iphone.  The exception being itunes purchases.
    You need to copy everything from the old computer, or your backup copy of your old computer, to the new one.

Maybe you are looking for

  • Problem with streaming video

    Hi! I have a problem with my project. Please help me! I tried to send a video streaming between 2 computers. I used socket connection and AVReceive2, AVTransmit. When received computer display 59 seconds, it stop the connection, socket is closed and

  • Error while creating a RFC model for WD for Java

    Hi, While trying out the example(TutWD_FlightList_Init.zip) for model programming in the NDS,I got the following error when I try to create a model: Plugin Name     Web Dynpro Model Editor Services Plugin Id     com.sap.ide.webdynpro.service.modeledi

  • IPod wont turn on........or connect to iTunes

    i cant get the iPod to turn on, it wont do anything. i also cant get it to connect to my iTunes. i know that the iTunes works perfectly fine because i had the same exact iPod model connected to it yesterday (a different iPod though). any help please.

  • How to migrate a two node ISE installation to a six node ISE installation

    How do we migrate from a two node ISE installation where the primary ISE has IP address A and the secondary has IP address B to a six node ISE distributed installation with one primary admin ISE, one secondary admin ISE, one primary monitoring ISE, o

  • Printing problem in prod order.

    Hello Guru, I have following problem. User release collective production orders (COHV) and then try to print on production order by t code "CO02". At that time system prints all released production orders. (Actually system should print only one produ