OSX 10.4.8 probs w Audiowerk 8
Hi All:
Operating MAC OSX Tiger 10.4.8 with Logic Pro 7 (not crossgrade)
and a single M-Audio 1010 Delta card. This is fine.
but I've recently installed an older Audiowerk 8 (from a lonely G3) card to combine for more outputs on my G4 Dual 867 via Logic.
Have setup this no probs, BUT as I've heard rumblings, there are driver problems associated with OS Tiger and this card.
Please let me know if i must simply buy a second 1010 card or there IS a way or driver update to use my Audiowerk ....kinda sad to see it die.....
SYMPTOM: after about 10 minutes of playback w Logic 7, the output becomes noisy and distorted....useless.
Thanks in advance for all replies !!!
N
Hi All:
Operating MAC OSX Tiger 10.4.8 with Logic Pro 7 (not
crossgrade)
and a single M-Audio 1010 Delta card. This is fine.
but I've recently installed an older Audiowerk 8
(from a lonely G3) card to combine for more outputs
on my G4 Dual 867 via Logic.
Have setup this no probs, BUT as I've heard
rumblings, there are driver problems associated with
OS Tiger and this card.
Please let me know if i must simply buy a second 1010
card or there IS a way or driver update to use my
Audiowerk ....kinda sad to see it die.....
SYMPTOM: after about 10 minutes of playback w Logic
7, the output becomes noisy and
distorted....useless.
Thanks in advance for all replies !!!
N
The Audiowerk 8 is a VERY old product and there has not been a driver update in a long time.
It also doesn't sound very good by today's standards. For $250 you coud buy much better sounding devices.
It is time to retire it IMHO.
Similar Messages
-
Shutdown while startup, disk full error on verbose
i have a mac book pro when starting , the gray screen appears, later the apple and 10 seconds later aprox, turn off
i try verbose mode and after turn off i can see a message “Disk full error"
Operating system: OSX 10.9
322MB FREE OF 300GB .. (my girlfriend is a graphic designer and does not pay any attention to alerts ..)
I prove, smc reset, 2 chime sound test, safe mode (turn off too).
performing tests were:
1. Launch the recovery console ( from bootable usb osx mavericks) ,
a. i probe unmount the volume Macintosh HD, not possible, because, its in use.
a. verify disk ( Macintosh HD) , "the disk needs to be repair"
b . repair disk ( Macintosh HD) , Keys out of order , ... Utility cant repair disk , and restore your backed -up files
c . Check disk (320gb toshiba ..) , the partition map need to be repaired , because ... Problem with the EFI system partitions
d . repair disk (320gb toshiba ..) , but ... when repair , try with Recovery HD, and works fine (not Macintosh HD)
After that, the disc automatically unmounts and its not possible mount again (from terminal said "mount: /dev/disk0s2: unknow special file of file system")
2 . Probe I start with a recovery console (local disk)
same results (on repair 320gb toshiba.. the first time i run it, said "can’t perform live”, after that, same result like point 1
3. restart, with recovery console (local disk)
a. launch terminal and try to delete manually , go to /dev/disk0s2 (/Volumes/Macintosh HD) and can browse the disk (ex /Users/xxxx/Desktop), but when tried rm, appears “Read-Only File System"
4. Remove the HD from mac and put it on case, when i connect it via USB to another mac book pro, the OS, saids “can’t recognize the disk, initialize, ignore, eject)
it is possible unmount the volume and remount like read-write from recovery console?
is it possible to access the data in read-write mode for any way to delete some huge files?
its the only solution mount and external disk and make and tedious scp from Terminal???, if its possible
regards, sorry for my bad English
DarioThere are lots of hidden directories. There could be actual data instead of alias mount points under "/Volumes" which is often one reason.
There are a couple programs to show where space is going, as well as sort output from terminal, but I prefer OmniGroup OmniDiskSweeper - look on MacUpdate - to show and access files. Program works fine even though shareware.
And yes, you might want to use the Raptor? for something else and get even WD 640GB for $75, or the 3rd gen VelociRaptor 300GB $289.
There are threads in "Using Leopard" regularly about "where did my space go." -
Logic & Mainstage Crash On Leopard 10.5.2
I have discussed with many Leopard user lately...
This is what I heard from them
1. with 10.5.1 and Mainstage 1.0.2 I had a pretty **** solid setup, since the 10.5.2 update I'm getting crazy cpu spikes all over the place and its basically feeling a lot less reliable. My advice, if you're using Mainstage for gigging, hold of on the osx update, I'm prob gonna have to roll back. You'd think Apple would test this sorta thing especially on their own programs!
2. When I ran Logic on my PowerBook under Leopard it would frequently crash, have errors, CoreAudio Failures, complete drop outs, hangs, zombies.. you name it.. all of which were resolved by re-installing tiger..
Thus I have two partitions on the PowerBook now, Tiger and Leopard, Tiger is a base install with nothing on that I don't need for Sound, and Leopard is my playhouse for all other things.. ***** to have to reboot but it gives you an air of confidence when you're recording that mdsworker (Spotlight) won't suddenly decide to have an episode and eat all your cpu cycles like it does in Leopard.
3. I've read that AirPort screws up the CPU. Can you disable AirPort and test again?
4. Not only 10.5.2 but all of leopard, I gave up stripped everything of my mac book pro and reinstalled Tiger, Logic and Mainstage. It took 4 hours to do but I at least stable now
I'm surprised Apple is doing nothing but making the problem worse. I've had an Apple computer in one form or another since 1980 and this is the first time I feel really let down.
They are turning into what Steve Jobs called Microsoft
"A third rate software company"
5. How is Mainstage with Tiger then? I found it was pretty stable under Leopard 10.5.1 so may just roll back to that but have been considering going all the way back to Tiger though. Leopard as a whole seems pretty stable now but its like they're not too fussed about Mainstage users, the 1 program that needs 100% reliability.
6. It's much more stable under Tiger no dropouts or problems I won't update to Leopard until I'm sure that it will work
7. Well, I still use Tiger and since the last Airport update neither Logic nor Mainstage work properly until I swtch off Airport. Before this update I had no problems WHATSOEVER with Airport and Logic running at the same time.A lot of the comments in your post were mine and I have an update!
I attended a Mainstage demo and my local apple dealers store and was such a pain in the *** that the apple rep & the guy who owns the store pulled me aside and asked me what they could do to I guess basically stop me from messing their demo (this was at the point they were stress testing Mainstage on a mac book pro without any CPU problems at all.
So the next day I took my mac in and the service tech did a full diagnostic on my mac, replaced a bunch of ram (it was apple ram not 3rd party) with new memory all for free!!!
In addition the service rep contacted apple Logic support to see what's being done and they advised that they are aware of the problems and there will be a fix in the next update.
Anyway the new ram has helped a bit I still get the occasion pop and crash but I can at least play a gig without watching the CPU meter all night,
The moral of the story is if you have problem, find a demo and be a pain in the butt. It really works
JN -
Mainstage & Logic Crash On Leopard 10.5.2....
I have discussed with many Leopard user lately...
This is what I heard from them
1. with 10.5.1 and Mainstage 1.0.2 I had a pretty **** solid setup, since the 10.5.2 update I'm getting crazy cpu spikes all over the place and its basically feeling a lot less reliable. My advice, if you're using Mainstage for gigging, hold of on the osx update, I'm prob gonna have to roll back. You'd think Apple would test this sorta thing especially on their own programs!
2. When I ran Logic on my PowerBook under Leopard it would frequently crash, have errors, CoreAudio Failures, complete drop outs, hangs, zombies.. you name it.. all of which were resolved by re-installing tiger..
Thus I have two partitions on the PowerBook now, Tiger and Leopard, Tiger is a base install with nothing on that I don't need for Sound, and Leopard is my playhouse for all other things.. ***** to have to reboot but it gives you an air of confidence when you're recording that mdsworker (Spotlight) won't suddenly decide to have an episode and eat all your cpu cycles like it does in Leopard.
3. I've read that AirPort screws up the CPU. Can you disable AirPort and test again?
4. Not only 10.5.2 but all of leopard, I gave up stripped everything of my mac book pro and reinstalled Tiger, Logic and Mainstage. It took 4 hours to do but I at least stable now
I'm surprised Apple is doing nothing but making the problem worse. I've had an Apple computer in one form or another since 1980 and this is the first time I feel really let down.
They are turning into what Steve Jobs called Microsoft
"A third rate software company"
5. How is Mainstage with Tiger then? I found it was pretty stable under Leopard 10.5.1 so may just roll back to that but have been considering going all the way back to Tiger though. Leopard as a whole seems pretty stable now but its like they're not too fussed about Mainstage users, the 1 program that needs 100% reliability.
6. It's much more stable under Tiger no dropouts or problems I won't update to Leopard until I'm sure that it will work
7. Well, I still use Tiger and since the last Airport update neither Logic nor Mainstage work properly until I swtch off Airport. Before this update I had no problems WHATSOEVER with Airport and Logic running at the same time.
Message was edited by: ipod nano problems
Problem With Leopard 10.5.2Its Not Just me WHo is Havin this Problem... Every Leopard user who has Mainstage also has this problem...And I have Only one Login [Admin Login]
-
I'm trying to connect my mini to my mitsubishi 62725 dlp. I was able to hook it up with 10.3, however, I'm having issues with 10.4.2.
When the system boots (with a vga->vga on the dlp), the mini hangs right after the osX boot screen (the one after the spinning circle bit). I get no network, no GUI, nothing. Here are the errors in system.log:
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorCannotComplete : CGSDeviceLock: Invalid device window
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorCannotComplete : CGSDeviceLock: Invalid device window
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorCannotComplete : CGSDeviceSynchronize: Invalid device window
Oct 29 20:26:57 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorCannotComplete : CGSDeviceLock: Invalid device window
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorCannotComplete : CGSDeviceLock: Invalid device window
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorCannotComplete : CGSDeviceSynchronize: Invalid device window
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorCannotComplete : CGSDeviceLock: Invalid device window
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorCannotComplete : CGSDeviceLock: Invalid device window
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorCannotComplete : CGSDeviceSynchronize: Invalid device window
Oct 29 20:26:57 localhost /usr/libexec/WaitingForLoginWindow: kCGErrorInvalidConnection : CGSDisableUpdateForConnections: Invalid connection
I've googled, but turned up nada. Has anyone seen this before? Any idears as to wth is goin on?
Thanks,
DavidMore info I forgot to include. I can hook up my Windows laptop to the dlp without any problems, so I know the vga input on the tv is good.
Also, if I leave the vga connector off the mini, it boots up. Then I can connect to it via vnc and connect the vga cable. How can I get osX to re-read/probe for the display?
Thanks again,
DAvid -
Os X Mountain Lion and Logic Pro, Garageband Audio Recording Driver Update
HI just purchased the os x mountain lion upgrade....and ever since my recording software like logic pro and even garageband audion recording is given me a problem .....ive been getting loud static noise during audio recording.....is there an update that will fix these issues...need to know
en español
tengo el mismo problema , tengo un saffire 06 de focusrite y en logic pro 9,1,7 en garageband incluso en quicktime al darle al boton de grabar en una pista de audio ya sea con microfono o instrumento me hace un ruido de distorcion mas fuerte que la señal de audio pero si no le doy a grabar este no hace el ruido y suena todo bien microfono o instrumento (solo cuando quiero darle a grabar en la pista)
lo que es midi todo bien suena bien graba bien es solo el audio incluso los vst para guitarra hacen ese ruido o distorcion
-grabe microfono e instrumento en pod x3 en los mismos logic pro ,garage etc etc y ningun problema todo bien
(prueba de que es la compatibilidad de focusrite en mi caso saffire 06 con OSX mountain lion.)
-probe grabando microfono e instrumento en samplitude pro x suite y todo genial graba de maravilla sonido genial
(otra vez prueva que es un problema en focusrite y la actualizacion de sus drivers.)
por ultimo esto me empezo a suceder desde que actualize a osx mountain lion hasta ese momento en lion 10,7 todo sonaba bien.
jmcpro72 wrote:
jmcpro72 wrote:
HI just purchased the os x mountain lion upgrade....and ever since my recording software like logic pro and even garageband audion recording is given me a problem .....ive been getting loud static noise during audio recording.....is there an update that will fix these issues...need to know
HI just purchased the os x mountain lion upgrade....and ever since my recording software like logic pro and even garageband audion recording is given me a problem .....ive been getting loud static noise during audio recording.....is there an update that will fix these issues...need to know
en el soporte de focusrite me dan las mismas soluciones que ponen en su web lo de gatekeeper etc etc y nada no hay solucion mas que esperar a ver que sucede espero una solucion pronta. -
HELP Premiere Element Probs since upgrade to OSX 10.9.2
Hi,
since my upgrade to OSX 10.9.2 Adobe Premiere Elements 10 is causing probs whenever I want to add a menue to my movie. Can someone help me? Do I need to load a bugfix?
seit ich OSX 10.9.2 geladen habe stürzt men Premiere Elements 10 jedesmal ab wenn ich ein Menu zum Film hinzufügen will. Kann mir jemand helfen? Gibt es dafür einen Bugfix?
Danke THX
ValHi!
I have the same problem with my Adobe Premiere Elements 9! I also have a Mac. Always when I try to put a menu, it sends me an error message.
I know now that I'm not the only one... -
mac osx 10.6.8,firefox 7.0.1, mobile me mail-cannot make attachments/upload to mail,if I switch to safari no prob., my laptop with firefox-no prob., what am I missing?
Hi mdlongoptom-
You might want to try these steps:
-> Clear Cookies & Cache
• https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
-> Clear the Network Cache
-> Reload web page(s) and bypass the cache.
• Press and hold Shift and left-click the Reload button.
• Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
• Press "Cmd + Shift + R" (MAC)
Check and tell if its working. Hope that helps. -
updated to iTunes 10.7 from app Store last night. After the update, iTunes opens then stalls with the "spinning pizza wheel". Force Quit is unresponsive and will not shut it down. If I then open other applications say Safari for example, the problem migrates over to Safari and it similarly stalls and becomes unresponsive. The only way to solve the problem is to manually shut the computer down. This is the most significant problem I have experienced on an apple computer since OSX was introduced because it impacts on Force Quit which means that you have to shut the whole deal down. There are obvious problems for use of Apple TV and apple store etc. ! I am running mountain lion 10.8.1 on a 27" iMac with 2T Time Capsule connected wirelessly. How do I downgrade iTunes back to 10.6? I had no problems with Mountain Lion or iTunes up to that point.
this is the exact same problem i've been dealing with for the past 2 days. after i installed itunes 10.7 for my iphone5 it would crash my mbp's lion system wide. i tried every solution i could find on google and i've actually had to reinstall lion & time machine my backups because of it. right now i'm too scared to redownload itunes 10.7. i actually feel like waiting for the "new itunes" that comes out in october.
-
Garage Band '11: pop-up error forces me to power off-on. Message states that info will be sent to Apple.
I never hear back from anyone about this.
Second prob: Fan sometimes comes on, runs high speed, then slowly runs down and stops running.First thing to do is a SMC Reset, you can find instructions at:
http://support.apple.com/kb/HT3964
READ THE INSTRUCTIONS CAREFULLY!!!!
Then try Repairing Disk Permissions, do this at least 2x. You will find this in Disk Utility which is located in Applications - Utilities - Disk Utility.
Finally you may need to uninstall Garage Band and reinstall. You may have to use Pacifist to do this, you can find it at:
http://www.macupdate.com/app/mac/6812/pacifist -
IMac Disk Utility Prob/Reinstalling OSX?
Hi guys,
I would have been most grateful to you if you could give me some tips on the following situation.
I have got some sort of a bug in my iMac G5 Ambient Light Sensor: it turned off 2 times, and the Disk Utility said I had to repair the volume, well, the usual stuff, you know: 'The underlying task reported failure...' and blablabla... I have tried to startup from the OSX DVD from my MacBook, since it was the closest version to what I have on the iMac [10.4.8], but it gave me the Kernel Panic and asked to restart. Now I am thinking of reinstalling the whole system, since what I've got on my iMac isn't that vitally important and I can backup some files on my Book, but I would like to know what you could advise me. Maybe there's some way round? Is it normal to reinstall the OSX from my MacBook DVD? Will it be fine? The problem is that I don't have an original CD that came with the iMac. :-/
I can also try to startup from another person's MacBookPro and try to fix the problem with the Disk Utility, but perhaps it won't work? Can it be that I'll have more bugs in the future? Probably it's better to reinstall and all the bugs will be erased? Anyone had anything of a kind?
Oh, yes, and I would like to know if the Archieve option in the OSX Install does actually save the programs the way they are, and if they'd need any kind of installation afterwards, after the OSX installation.
Thanx for any possible assistance!
MacBook Mac OS X (10.4.8)Welcome to Discussions - no, you cannot start up from your MacBook install disc, it has a totally different structure. You need an install disc for the G5 ambient light, Apple will sell you one, or perhaps you can find it on eBay, but it must be for the ambient light, and no other model.
You can start in target disk mode using your MacBook.
If you do an archive and install, and check "preserve user settings and preferences, all your apps and settings (well, most of them) will be saved, here are the instructions.
Pplease let us know how you make out,
Miriam -
Utility had issues with erasing disk. It took 36 hours and then said it was a failure. I tried repairing and verifying and partitioning. Finally, I used the original disk to install the system. It installed Snow Leopard. I was unable to install the 2nd disk ILife items, so I repurchased those. I thought I was all set but it would not upgrade past 10.6 or something. After it is all set up, I realize there is nothing on the computer. The updates were in download folders and in reading the install logs, it said the install disc was read only and the system was installed from somewhere else and then it was reaped and something about a sandbox and it seemed important that all the Asian languages were added in, even though I unchecked that option. All these odd programs and windows are on there, which I do not use and do not want on there and do not see it on there. So, I tried this several more times, it appears someone is using the Root user. I tried to disable the root user as I do not understand how to set it. Last night, I took the main partition that I put everything on and made me the owner and took over that whole disk. Then the other two were locked, do I ejected them. Then I wanted to erase 4 things - an iDisk an some other trash and the trash is suddenly emptying 989 items, I think were the logs. So, I turned it off. What is going on? I was unable to fix the install disk. The permissions were not repairable on the partition, it was verified as being ok though. Has someone taken over my computer? How can I get rid of them and get it fixed? It has affected my iPad and my iPhone 5. I really need these devices. I am an artist and need to take and post photos of my work. Is this Chinese people doing this and are they nearby? I did notice they wanted me to sign up for mo ole me. in the logs it even said, no [email protected]. And no password access at that address. So, I was also not able to update to Mountain Lion and Icloud again. at one point it looked like I had. i downloaded everything I purchased that was in Icloud to Itunes and it showed the lion in Mail but there was no cloud icon and Mountain Lion said to install, meaning it was not installed. System information confirmed this. oh, and my main disk in disk Utility is named with an unchangeable name that is the serial number of the mac and it says it is an in/out sata media drive. Please, please help me.
1. If you break your post into paragraphs it is much easier to read.
2. I have no idea what your post is referring to, and how - if at all - it relates to iPhoto.
3. It's a good idea to re-read what you've posted, and ask yourself how it might look to someone who doesn't know you and doesn't know what's going on with your machine. -
I just installed Mavricks over Snow Lepard, and my boot speed is really slow and so is the quit time. From boot to ability to use apps. is slightly greater than 1 minute. Once the desk top appears, the icons in the dock and all aps are not active for at least 25-30 seconds. I would really appreciate any advice anyone more knowledgeable that I can offer. I have attached my system boot log from BOOT_TIME to 1 minute past the time on the clock when I logged in. (I apologize in advance for the length of the log, but hopefully it will suply the needed clues):
Machine characteristics:
MacBook Pro
15-inch, Mid 2009
OSX 10.9
3.06 GHz Intel core 2 Duo
8GB 1067 MHz DDR3
NVIDIA GeForce 9400M 256 MB
L2 Cache:6 MB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP53.00AC.B03
BOOT_LOG
Nov 26 21:49:43 localhost bootlog[0]: BOOT_TIME 1385520583 0
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:01 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Nov 26 21:50:04 --- last message repeated 6 times ---
Nov 26 21:50:01 localhost kernel[0]: Longterm timer threshold: 1000 ms
Nov 26 21:50:01 localhost kernel[0]: Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Nov 26 21:50:01 localhost kernel[0]: vm_page_bootstrap: 1957638 free pages and 57594 wired pages
Nov 26 21:50:01 localhost kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
Nov 26 21:50:01 localhost kernel[0]: zone leak detection enabled
Nov 26 21:50:01 localhost kernel[0]: "vm_compressor_mode" is 4
Nov 26 21:50:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 26 21:50:01 localhost kernel[0]: standard background quantum is 2500 us
Nov 26 21:50:01 localhost kernel[0]: mig_table_max_displ = 74
Nov 26 21:50:01 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
Nov 26 21:50:01 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
Nov 26 21:50:01 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Nov 26 21:50:01 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 26 21:50:01 localhost kernel[0]: calling mpo_policy_init for Sandbox
Nov 26 21:50:01 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Nov 26 21:50:01 localhost kernel[0]: calling mpo_policy_init for Quarantine
Nov 26 21:50:01 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Nov 26 21:50:01 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 26 21:50:01 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 26 21:50:01 localhost kernel[0]: MAC Framework successfully initialized
Nov 26 21:50:01 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Nov 26 21:50:01 localhost kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
Nov 26 21:50:01 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Nov 26 21:50:01 localhost kernel[0]: ACPI: sleep states S3 S4 S5
Nov 26 21:50:01 localhost kernel[0]: pci (build 22:16:29 Sep 19 2013), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
Nov 26 21:50:01 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 22:16:38 Sep 19 2013) initialization complete
Nov 26 21:50:01 localhost kernel[0]: [ PCI configuration begin ]
Nov 26 21:50:01 localhost kernel[0]: console relocated to 0xf80010000
Nov 26 21:50:01 localhost kernel[0]: [ PCI configuration end, bridges 6, devices 19 ]
Nov 26 21:50:01 localhost kernel[0]: NVEthernet::start - Built Sep 19 2013 22:20:06
Nov 26 21:50:01 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 64b9e8fffeb7a402; max speed s800.
Nov 26 21:50:01 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
Nov 26 21:50:01 localhost kernel[0]: mcache: 2 CPU(s), 64 bytes CPU cache line size
Nov 26 21:50:01 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
Nov 26 21:50:01 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Nov 26 21:50:01 localhost kernel[0]: rooting via boot-uuid from /chosen: FE938F11-7B34-3E73-9EE2-51E88F19B800
Nov 26 21:50:01 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 26 21:50:01 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Nov 26 21:50:01 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Nov 26 21:50:01 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Nov 26 21:50:01 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Nov 26 21:50:01 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Nov 26 21:50:01 localhost kernel[0]: BTCOEXIST off
Nov 26 21:50:01 localhost kernel[0]: BRCM tunables:
Nov 26 21:50:01 localhost kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
Nov 26 21:50:01 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9500420ASG Media/IOGUIDPartitionScheme/Untitled@2
Nov 26 21:50:01 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
Nov 26 21:50:01 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
Nov 26 21:50:01 localhost kernel[0]: VM Swap Subsystem is ON
Nov 26 21:50:01 localhost kernel[0]: Waiting for DSMOS...
Nov 26 21:49:45 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Nov 26 21:49:45 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
Nov 26 21:49:55 localhost com.apple.SecurityServer[14]: Session 100000 created
Nov 26 21:49:59 localhost distnoted[21]: # distnote server daemon absolute time: 17.216507128 civil time: Tue Nov 26 21:49:59 2013 pid: 21 uid: 0 root: yes
Nov 26 21:50:00 localhost hidd[49]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
Nov 26 21:50:01 localhost hidd[49]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 26 21:50:01 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Nov 26 21:50:01 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Nov 26 21:50:05 localhost com.apple.usbmuxd[26]: usbmuxd-323.1 on Oct 3 2013 at 12:43:24, running 64 bit
Nov 26 21:50:05 localhost kernel[0]: init
Nov 26 21:50:05 localhost kernel[0]: probe
Nov 26 21:50:05 localhost kernel[0]: start
Nov 26 21:50:05 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Nov 26 21:50:05 localhost kernel[0]: NVDAStartup: Official
Nov 26 21:50:05 localhost kernel[0]: NVDANV50HAL loaded and registered
Nov 26 21:50:05 localhost kernel[0]: NVDAStartup: Official
Nov 26 21:50:05 localhost kernel[0]: NVDANV50HAL loaded and registered
Nov 26 21:50:05 localhost kernel[0]: AGC: 3.4.12, HW version=1.8.8, flags:0, features:4
Nov 26 21:50:05 localhost kernel[0]: IOBluetoothUSBDFU::probe
Nov 26 21:50:05 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0207
Nov 26 21:50:05 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x6c00 ****
Nov 26 21:50:05 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x6c00 ****
Nov 26 21:50:05 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x6c00
Nov 26 21:50:05 localhost kernel[0]: Previous Shutdown Cause: -128
Nov 26 21:50:05 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Nov 26 21:50:05 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Nov 26 21:50:05 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x7040 -- 0xe000 -- 0x6c00 ****
Nov 26 21:50:06 localhost kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active
Nov 26 21:50:06 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Nov 26 21:50:06 localhost kernel[0]: DSMOS has arrived
Nov 26 21:50:07 localhost configd[18]: dhcp_arp_router: en1 SSID unavailable
Nov 26 21:50:07 localhost configd[18]: network changed.
Nov 26 21:50:07 MacBookPro-2.local configd[18]: setting hostname to "MacBookPro-2.local"
Nov 26 21:50:07 MacBookPro-2 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Nov 26 21:50:07 MacBookPro-2.local mds[40]: (Normal) FMW: FMW 0 0
Nov 26 21:50:07 MacBookPro-2.local mds[40]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
Nov 26 21:50:07 --- last message repeated 2 times ---
Nov 26 21:50:07 MacBookPro-2.local blued[59]: hostControllerOnline - Number of Paired devices = 2, List of Paired devices = (
"00-1d-d8-3a-cc-60",
"00-26-08-ab-c6-5f"
Nov 26 21:50:08 MacBookPro-2.local com.apple.SecurityServer[14]: Entering service
Nov 26 21:50:08 MacBookPro-2.local loginwindow[44]: Login Window Application Started
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: label: default
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: dbname: od:/Local/Default
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: mkey_file: /var/db/krb5kdc/m-key
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: acl_file: /var/db/krb5kdc/kadmind.acl
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: digest-request: uid=0
Nov 26 21:50:08 MacBookPro-2.local mDNSResponder[41]: mDNSResponder mDNSResponder-522.1.11 (Aug 24 2013 23:49:34) starting OSXVers 13
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: digest-request: netr probe 0
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: digest-request: init request
Nov 26 21:50:08 MacBookPro-2.local digest-service[71]: digest-request: init return domain: BUILTIN server: MACBOOKPRO-2 indomain was: <NULL>
Nov 26 21:50:08 MacBookPro-2.local UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Nov 26 21:50:08 MacBookPro-2.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
Nov 26 21:50:08 MacBookPro-2.local awacsd[61]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
Nov 26 21:50:08 MacBookPro-2.local awacsd[61]: InnerStore CopyAllZones: no info in Dynamic Store
Nov 26 21:50:08 MacBookPro-2.local WindowServer[85]: Server is starting up
Nov 26 21:50:08 MacBookPro-2.local blued[59]: link key found for device: 00-1d-d8-3a-cc-60
Nov 26 21:50:08 MacBookPro-2.local configd[18]: network changed.
Nov 26 21:50:08 MacBookPro-2.local configd[18]: network changed: DNS*
Nov 26 21:50:08 MacBookPro-2.local mDNSResponder[41]: D2D_IPC: Loaded
Nov 26 21:50:08 MacBookPro-2.local mDNSResponder[41]: D2DInitialize succeeded
Nov 26 21:50:08 MacBookPro-2.local mDNSResponder[41]: 4: Listening for incoming Unix Domain Socket client requests
Nov 26 21:50:08 MacBookPro-2.local networkd[105]: networkd.105 built Aug 24 2013 22:08:46
Nov 26 21:50:08 MacBookPro-2.local aosnotifyd[64]: aosnotifyd has been launched
Nov 26 21:50:08 MacBookPro-2.local systemkeychain[88]: done file: /var/run/systemkeychaincheck.done
Nov 26 21:50:08 MacBookPro-2.local airportd[65]: airportdProcessDLILEvent: en1 attached (up)
Nov 26 21:50:08 MacBookPro-2 kernel[0]: createVirtIf(): ifRole = 1
Nov 26 21:50:08 MacBookPro-2 kernel[0]: in func createVirtualInterface ifRole = 1
Nov 26 21:50:08 MacBookPro-2 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
Nov 26 21:50:08 MacBookPro-2 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
Nov 26 21:50:08 MacBookPro-2 kernel[0]: Created virtif 0xffffff8014825400 p2p0
Nov 26 21:50:08 MacBookPro-2 kernel[0]: nspace-handler-set-snapshot-time: 1385520610
Nov 26 21:50:08 MacBookPro-2.local com.apple.mtmd[39]: Set snapshot time: 2013-11-26 21:50:10 -0500 (current time: 2013-11-26 21:50:08 -0500)
Nov 26 21:50:08 MacBookPro-2.local locationd[46]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
Nov 26 21:50:08 MacBookPro-2.local locationd[46]: NBB-Could not get UDID for stable refill timing, falling back on random
Nov 26 21:50:09 MacBookPro-2.local locationd[46]: Location icon should now be in state 'Inactive'
Nov 26 21:50:09 MacBookPro-2.local aosnotifyd[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:09 MacBookPro-2.local mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:10 MacBookPro-2.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F8312006960 MacBookPro-2.local. (Addr) that's already in the list
Nov 26 21:50:10 MacBookPro-2.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F8312006DF0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
Nov 26 21:50:10 MacBookPro-2.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F8312008960 MacBookPro-2.local. (AAAA) that's already in the list
Nov 26 21:50:10 MacBookPro-2.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F8312008DF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
Nov 26 21:50:10 MacBookPro-2.local aosnotifyd[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:10 MacBookPro-2.local mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:11 MacBookPro-2.local blued[59]: Save link key for device: 00-1d-d8-3a-cc-60
Nov 26 21:50:11 MacBookPro-2.local aosnotifyd[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:11 MacBookPro-2.local mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:12 MacBookPro-2.local aosnotifyd[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:12 MacBookPro-2.local mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Nov 26 21:50:13 MacBookPro-2.local apsd[63]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Nov 26 21:50:13 MacBookPro-2 kernel[0]: hfs: mounted Recovery HD on device disk0s3
Nov 26 21:50:13 MacBookPro-2.local mds[40]: (Normal) Volume: volume:0x7f932b028000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
Nov 26 21:50:13 MacBookPro-2.local mtmfs[38]: mount succeeded for /Volumes/MobileBackups
Nov 26 21:50:13 MacBookPro-2.local mds[40]: (Normal) Volume: volume:0x7f932a8b2000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/MobileBackups
Nov 26 21:50:13 MacBookPro-2.local mds[40]: (Normal) Volume: volume:0x7f932a8b2000 ********** Created snapshot backup index
Nov 26 21:50:13 MacBookPro-2.local fseventsd[50]: Logging disabled completely for device:1: /Volumes/Recovery HD
Nov 26 21:50:14 MacBookPro-2 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
Nov 26 21:50:14 MacBookPro-2 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
Nov 26 21:50:14 MacBookPro-2.local WindowServer[85]: Session 256 retained (2 references)
Nov 26 21:50:14 MacBookPro-2.local WindowServer[85]: Session 256 released (1 references)
Nov 26 21:50:14 MacBookPro-2.local WindowServer[85]: Session 256 retained (2 references)
Nov 26 21:50:14 MacBookPro-2.local WindowServer[85]: init_page_flip: page flip mode is on
Nov 26 21:50:15 MacBookPro-2 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
Nov 26 21:50:15 MacBookPro-2.local SystemStarter[113]: HP IO Monitor (126) did not complete successfully
Nov 26 21:50:15 MacBookPro-2.local SystemStarter[113]: The following StartupItems failed to start properly:
Nov 26 21:50:15 MacBookPro-2.local SystemStarter[113]: /Library/StartupItems/HP IO
Nov 26 21:50:15 MacBookPro-2.local SystemStarter[113]: - execution of Startup script failed
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 1 modes for display 0x00000000 [1, 0]
Nov 26 21:50:15 --- last message repeated 1 time ---
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 36 modes for display 0x00000000 [30, 6]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 1 modes for display 0x00000000 [1, 0]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: mux_initialize: Mode is logout
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 36 modes for display 0x00000000 [30, 6]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Found 1 modes for display 0x00000000 [1, 0]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: WSMachineUsesNewStyleMirroring: false
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x04272900: GL mask 0x5; bounds (0, 0)[1440 x 900], 36 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca4, S/N 0, Unit 0, Rotation 0
UUID 0x8a96a568c33550779a382c64e81094d2
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x003f003d: GL mask 0xa; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: WSSetWindowTransform: Singular matrix
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x04272900: GL mask 0x5; bounds (0, 0)[1440 x 900], 36 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca4, S/N 0, Unit 0, Rotation 0
UUID 0x8a96a568c33550779a382c64e81094d2
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x003f003d: GL mask 0xa; bounds (2464, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: CGXPerformInitialDisplayConfiguration
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x04272900: Unit 0; Alias(0, 0x5); Vendor 0x610 Model 0x9ca4 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: Display 0x003f003d: Unit 1; Alias(1, 0xa); Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: CGXMuxBoot: Boot normal
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x00004cc3, unit 0, caps QEX|MIPMAP, vram 256 MB
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor: GL renderer id 0x0202260c, GL mask 0x0000000c, accelerator 0x00003a2b, unit 2, caps QEX|MIPMAP, vram 512 MB
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor: GL renderer id 0x0202260c, GL mask 0x0000000c, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: GLCompositor enabled for tile size [256 x 256]
Nov 26 21:50:15 MacBookPro-2.local WindowServer[85]: CGXGLInitMipMap: mip map mode is on
Nov 26 21:50:15 MacBookPro-2.local loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Nov 26 21:50:16 MacBookPro-2.local WindowServer[85]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Nov 26 21:50:16 MacBookPro-2.local launchctl[138]: com.apple.findmymacmessenger: Already loaded
Nov 26 21:50:16 MacBookPro-2.local loginwindow[44]: Setting the initial value of the magsave brightness level 1
Nov 26 21:50:16 MacBookPro-2.local loginwindow[44]: Login Window Started Security Agent
Nov 26 21:50:16 MacBookPro-2.local SecurityAgent[146]: This is the first run
Nov 26 21:50:16 MacBookPro-2.local SecurityAgent[146]: MacBuddy was run = 0
Nov 26 21:50:16 MacBookPro-2.local WindowServer[85]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fe75ac33640) - enabling OpenGL
Nov 26 21:50:16 MacBookPro-2.local com.apple.SecurityServer[14]: Session 100005 created
Nov 26 21:50:16 MacBookPro-2.local UserEventAgent[140]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Nov 26 21:50:17 MacBookPro-2 kernel[0]: MacAuthEvent en1 Auth result for: 00:1c:10:21:4e:2f MAC AUTH succeeded
Nov 26 21:50:17 MacBookPro-2 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
Nov 26 21:50:17 MacBookPro-2 kernel[0]: AirPort: Link Up on en1
Nov 26 21:50:17 MacBookPro-2 kernel[0]: en1: BSSID changed to 00:1c:10:21:4e:2f
Nov 26 21:50:17 MacBookPro-2 kernel[0]: AirPort: RSN handshake complete on en1
Nov 26 21:50:17 MacBookPro-2 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Nov 26 21:50:17 MacBookPro-2.local WindowServer[85]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Nov 26 21:50:17 MacBookPro-2.local WindowServer[85]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Nov 26 21:50:19 --- last message repeated 1 time ---
Nov 26 21:50:19 MacBookPro-2.local SecurityAgent[146]: User info context values set for RS
Nov 26 21:50:19 MacBookPro-2.local SecurityAgent[146]: Login Window login proceeding
Nov 26 21:50:19 MacBookPro-2.local configd[18]: network changed: DNS* Proxy
Nov 26 21:50:19 MacBookPro-2.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'NetLink' making interface primary (protected network)
Nov 26 21:50:19 MacBookPro-2.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
Nov 26 21:50:19 MacBookPro-2.local UserEventAgent[11]: Captive: en1: Probing 'NetLink'
Nov 26 21:50:19 MacBookPro-2.local configd[18]: network changed: v4(en1!:192.168.1.107) DNS+ Proxy+ SMB
Nov 26 21:50:19 MacBookPro-2.local loginwindow[44]: Login Window - Returned from Security Agent
Nov 26 21:50:19 MacBookPro-2.local loginwindow[44]: USER_PROCESS: 44 console
Nov 26 21:50:19 MacBookPro-2.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
Nov 26 21:50:19 MacBookPro-2.local airportd[65]: _doAutoJoin: Already associated to “NetLink”. Bailing on auto-join.
Nov 26 21:50:19 MacBookPro-2 kernel[0]: AppleKeyStore:Sending lock change 0
Nov 26 21:50:19 MacBookPro-2 com.apple.launchd.peruser.501[160]: Background: Aqua: Registering new GUI session.
Nov 26 21:50:19 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.apple.cmfsyncagent): Ignored this key: UserName
Nov 26 21:50:19 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.apple.EscrowSecurityAlert): Unknown key: seatbelt-profiles
Nov 26 21:50:19 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Nov 26 21:50:19 MacBookPro-2.local launchctl[162]: com.apple.pluginkit.pkd: Already loaded
Nov 26 21:50:19 MacBookPro-2.local launchctl[162]: com.apple.sbd: Already loaded
Nov 26 21:50:19 MacBookPro-2.local distnoted[164]: # distnote server agent absolute time: 37.621698455 civil time: Tue Nov 26 21:50:19 2013 pid: 164 uid: 501 root: no
Nov 26 21:50:20 MacBookPro-2.local com.apple.SecurityServer[14]: Session 100007 created
Nov 26 21:50:20 MacBookPro-2.local WindowServer[85]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Nov 26 21:50:20 MacBookPro-2.local SystemUIServer[172]: Cannot find executable for CFBundle 0x7feb32de2b80 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
Nov 26 21:50:20 MacBookPro-2.local sharingd[182]: Starting Up...
Nov 26 21:50:20 MacBookPro-2.local WindowServer[85]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Nov 26 21:50:20 MacBookPro-2.local SystemUIServer[172]: Cannot find executable for CFBundle 0x7feb32d53ce0 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
Nov 26 21:50:20 MacBookPro-2.local SystemUIServer[172]: Cannot find executable for CFBundle 0x7feb32d78760 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
Nov 26 21:50:21 MacBookPro-2.local apsd[63]: Unrecognized leaf certificate
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.single-user-client[216]): assertion failed: 13A603: launchd + 102012 [C35AEAF6-FCF6-3C64-9FC8-38829064F8A8]: 0xd
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[217]): assertion failed: 13A603: launchd + 102012 [C35AEAF6-FCF6-3C64-9FC8-38829064F8A8]: 0xd
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[217]): Exited with code: 2
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist): Throttling respawn: Will start in 10 seconds
Nov 26 21:50:21 MacBookPro-2.local apsd[63]: Unexpected connection from logged out uid 501
Nov 26 21:50:21 MacBookPro-2 accountsd[227]: assertion failed: 13A603: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
Nov 26 21:50:21 MacBookPro-2 com.apple.launchd.peruser.501[160] ([email protected][215]): Exited with code: 2
Nov 26 21:50:21 MacBookPro-2.local SystemUIServer[172]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Nov 26 21:50:21 MacBookPro-2.local SystemUIServer[172]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Nov 26 21:50:21 MacBookPro-2 xpcproxy[231]: assertion failed: 13A603: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
Nov 26 21:50:21 MacBookPro-2.local com.apple.IconServicesAgent[230]: IconServicesAgent launched.
Nov 26 21:50:21 MacBookPro-2.local com.apple.SecurityServer[14]: Session 100011 created
Nov 26 21:50:22 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.apple.mrt.uiagent[197]): Exited with code: 255
Nov 26 21:50:22 MacBookPro-2 xpcproxy[238]: assertion failed: 13A603: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
Nov 26 21:50:23 MacBookPro-2.local awacsd[61]: Exiting
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
Nov 26 21:50:23 MacBookPro-2.local com.apple.audio.DriverHelper[229]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
Nov 26 21:50:23 MacBookPro-2.local UserEventAgent[163]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Nov 26 21:50:23 MacBookPro-2.local accountsd[227]: /SourceCache/Accounts/Accounts-336.9/ACDAuthenticationPluginManager.m - -[ACDAuthenticationPluginManager credentialForAccount:client:handler:] - 230 - The authentication plugin for account "[email protected]" (A3E6B1AD-D8C7-47BB-92AD-3D6B58528D00) could not be found!
Nov 26 21:50:23 MacBookPro-2.local accountsd[227]: /SourceCache/Accounts/Accounts-336.9/ACDAccountStore.m - __62-[ACDAccountStore credentialForAccountWithIdentifier:handler:]_block_invoke389 - 857 - No plugin provides credentials for account [email protected]. Falling back to legacy behavior.
Nov 26 21:50:23 MacBookPro-2.local WiFiKeychainProxy[192]: [NO client logger] <Aug 30 2013 23:40:46> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
Nov 26 21:50:23 MacBookPro-2.local WiFiKeychainProxy[192]: [NO client logger] <Aug 30 2013 23:40:46> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
Nov 26 21:50:27 MacBookPro-2.local com.apple.time[163]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Nov 26 21:50:30 MacBookPro-2.local com.apple.SecurityServer[14]: Session 100014 created
Nov 26 21:50:31 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[251]): assertion failed: 13A603: launchd + 102012 [C35AEAF6-FCF6-3C64-9FC8-38829064F8A8]: 0xd
Nov 26 21:50:31 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[251]): Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
Nov 26 21:50:31 MacBookPro-2 com.apple.launchd.peruser.501[160] (com.akamai.client.plist[251]): Job failed to exec(3) for weird reason: 2
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/System.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/lck~System.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/.fl947E1BDB, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/login.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/lck~login.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:31 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/.fl62323D2F, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:38 MacBookPro-2.local LKDCHelper[255]: Starting (uid=501)
Nov 26 21:50:38 MacBookPro-2.local ReportCrash[247]: Attempting to read data: Called memoryAtAddress: 0x9444, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 208.
Nov 26 21:50:38 MacBookPro-2.local ReportCrash[247]: Attempting to read data: Called memoryAtAddress: 0x9588, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 208.
Nov 26 21:50:41 MacBookPro-2.local gamed[226]: CKSoftwareMap: Registering with Daemon
Nov 26 21:50:42 MacBookPro-2.local syncdefaultsd[222]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
Nov 26 21:50:43 MacBookPro-2.local parentalcontrolsd[256]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/System.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/lck~System.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Library/Keychains/.fl947E1BDB, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/login.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/lck~login.keychain, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:44 MacBookPro-2.local com.apple.security.XPCKeychainSandboxCheck[248]: Can't get sandbox fs extension for /Volumes/SD Backup/Users/RS/Library/Keychains/.fl62323D2F, status=-1 errno=No such file or directory ext=(null)
Nov 26 21:50:47 MacBookPro-2.local com.apple.NotesMigratorService[260]: Joined Aqua audit session
Nov 26 21:50:47 MacBookPro-2 netsession_mac[216]: netsession_mac(216,0xb031d000) malloc: *** auto malloc[216]: error: GC operation on unregistered thread. Thread registered implicitly. Break on auto_zone_thread_registration_error() to debug.
Nov 26 21:50:47 MacBookPro-2.local com.apple.internetaccounts[238]: An instance 0x7f82c16e5760 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7f82c16c8660> (
<NSKeyValueObservance 0x7f82c16c8790: Observer: 0x7f82c16cf070, Key path: uidNext, Options: <New: NO, Old: NO, Prior: NO> Context: 0x7fff8fa4b44b, Property: 0x7f82c16c8630>
Nov 26 21:50:50 MacBookPro-2 netsession_mac[216]: netsession_mac(216,0xb039f000) malloc: *** auto malloc[216]: error: GC operation on unregistered thread. Thread registered implicitly. Break on auto_zone_thread_registration_error() to debug.
Nov 26 21:51:00 MacBookPro-2 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x6c00 ****
Nov 26 21:51:01 MacBookPro-2 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
Nov 26 21:51:02 MacBookPro-2 com.apple.launchd.peruser.501[160] (jp.co.canon.UFR2.BackGrounder[208]): Job appears to have crashed: Trace/BPT trap: 5
Nov 26 21:51:02 MacBookPro-2.local ReportCrash[247]: Attempting to read data: Called memoryAtAddress: 0x9444, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 267.
Nov 26 21:51:02 MacBookPro-2.local ReportCrash[247]: Attempting to read data: Called memoryAtAddress: 0x9588, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 267.
Nov 26 21:51:03 MacBookPro-2 com.apple.launchd.peruser.501[160] (jp.co.canon.UFR2.BackGrounder[267]): Job appears to have crashed: Trace/BPT trap: 5
Nov 26 21:51:03 MacBookPro-2 com.apple.launchd.peruser.501[160] (jp.co.canon.UFR2.BackGrounder): Throttling respawn: Will start in 10 seconds
Nov 26 21:51:03 MacBookPro-2.local ReportCrash[247]: Saved crash report for UFR II BackGrounder[208] version ??? to /Users/RS/Library/Logs/DiagnosticReports/UFR II BackGrounder_2013-11-26-215103_MacBookPro-2.crash
Nov 26 21:51:03 MacBookPro-2.local ReportCrash[247]: Saved crash report for UFR II BackGrounder[267] version ??? to /Users/RS/Library/Logs/DiagnosticReports/UFR II BackGrounder_2013-11-26-215103-1_MacBookPro-2.crash
Thanks again... Happy upcoming Turkey Day!In the future please don't post so much information unless you are asked for it. Most of what you posted is useless.
Here's what you can try:
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
How do I get my airport extreme to stop recycling? Using OSX 10.7.4, Airport Utility 6.1
How do I get my Airport Extreme to stop recycling? I'm using OSX 10.7.4 and Airport Utility 6.1.
The Airport Extreme is putting out the signal OK. Gan use my iPod no prob. The Mac goes from 'On' to 'looking for networks' back and forth all the time.
As Apple has said the AirPort Extreme is functioning correctly if other devices can connect. You have a Mac issue, so that is really a question for the support area for your Mac.
I suggest that you try one of these general areas, then pick out the specific model that you have:
Desktop Computers Notebooks -
This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!
Maybe you are looking for
-
I want to add tags to loops so that they show up in the loop browser in GB. Most of the loops in question are either mine or third party loops. Anybody know this trick? 20" iMac Intel Core Duo Mac OS X (10.4.7) 1.5 GB RAM. 160 & 250 GB LaCie fire
-
Scaling issue when printing in Pro X
When I zoom into a part of an architects pdf drawing and select "current view" at "actual size" and have 8.5x11 paper selected, the file prints to scale as normal, but when I select 11x17 the image area I selected gets reduced by about 3% from "actua
-
Passing resultser of one db adapter query to anoother db adapter query
I would like achieve the following: 1) first query returns PO_Number, Batch_Number,..... etc. in the first query. But in this query the PO_NUMBER and batch number can come mutiple times because of other columns. 2) But I have to send a single notific
-
Printing/Disabling print button
Hi, I don´t want users to print using the standard print button of Acrobat. To do that, I used the PDF security functionality (in File | Form Properties). I do want, on the other hand, the users to print using a custom button on the form that uses th
-
Trying to adapt custome build of proftpd to archlinux. Most off all build files are taken from AUR. After installation there is no directory /run/proftpd and because of this proftpd can not start. After creating directory /run/proftpd all is fine but