OSX 10.4.9 Update Volume in iTunes

I just updated to the 10.4.9 and i discovered that my volume in the iTunes 7.1 is extremely loud. I have to leave everything on LOW settings just to listen to a song. I have looked at the preferences in iTunes and such, but to no avail. any suggestions??
Thanks
17" iMac Intel Core Duo Mac OS X (10.4.9) Wacom Graphire Tablet/iPod Video

I have found this problem in several programs.
Just checking email I was blown away by the alert sound, but I resolved that somewhat as my alert sounds were turned all the way up, too.
I could resolve iTunes because I can control the volume separately.
In one game, Maelstrom, I have the game volume set to 1 (this is on a 0 to 8 scale) and the system volume set to just above mute and it is now tolerable, but relatively loud compared to before.
Other games I have no separate control over the sound level. They are dependent on the system sound. So they remain somewhat loud or very loud. Can't go quiet enough without going to mute.
Anyone resolve this issue yet?

Similar Messages

WHAT THE HECK! eversince I updated my itunes... My laptop keeps on crashing, i try to change the volume on itunes and it doesnt even move, and I quit Itunes but apparently it won't ever quit... I lost all my paper work cuz it crashed 4 times this week.

WHAT THE HECK! eversince I updated my itunes... My laptop keeps on crashing, i try to change the volume on itunes and it doesnt even move, and I quit Itunes but apparently it won't ever quit... I lost all my paper work cuz it crashed 4 times this week.

Try disabling the computer's antivirus and firewall for the network problem.
Also for the original problem try the following if Ana's suggestions does not work
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Mac Pro OSX 10.10 can't control volume in iTunes with keyboard

I can't control volume in iTunes with keyboard

Yes nachit, I have the same problem.
I've noticed that when I switch between the output audio devices (i.e. Built in speaker to headphones), the volume control fails.
I've already opened a topic yesterday. At this time, no answer.
We'll wait...

I cannot get apps to appear in my library menu so i can update them through iTunes. Happened since update to 11.0.2.Have tried all the suggested fixes such as making the sidebar appear etc New update is 'nasty'

As stated no matter how hard i try i CANNOT get apps to appear in my sidebar library menu so i can update them through itunes.Has only happened since last update of itunes .Really wish i hadn't updated as i have never had an issue b4.Spent most of day on fone to apple yesterday as the update created an issue that meant i could not sync at all.Anyway thanks to 'james' in arizona we sorted the first piece of trouble the update created .(sortof).
Not sure why it has to be messed with.Well i spose it is progress!!!
I've looked at lots of posts re this and tried all the suggestions but just cannot get the magic 'apps' category to appear in my sidebar in itunes???
One suggestion was that the apps if clicked on would have an 'update ' button but all i can do is delete them
Any thoughts would be greatly appreciated
(running osx 10.7.5 on MBP -slightly tricky cos i also run windows in a 'bootcamped' partition.Mind u itunes etc is in mac partition and has been working fine for the last 10 years!!!!!!!!!)

I'm going to assume that you use only one Apple ID so the two things that I can think of are to quite all processes and restart all devices and then try to sync those apps again. Quit iTunes, restart your computer and the iPad and then try to sync the apps again.
The other thing would be to try to reset your iTunes account by signing in and out of the account on the iPad. Settings>Store>Apple ID - tap the ID and sign out. Restart the iPad and then sign in to your account and try again.

Issue with the recent MAC OSX 10.7.5 update

The recent MAC OSX 10.7.5 update rendered my WD external backup disk unusable. The iMAC only recognizes it as read-only now despite having 2 TB of available space. It doesn't even show on my desktop anymore. I have tried disk repair but it couldn't be repaired. Any suggestions?

Copy these commands into TextEdit, replace the bracketed part with your username and the quoted parts with the ext HD's name, retaining the quotes.
sudo chflags 0 /Volumes/"name of ext HD"
sudo chmod a+rx /Volumes/"name of ext HD"
sudo chown -R <your username w/o brackets>:admin /Volumes/"name of ext HD"
Launch the Terminal app in /Applications/Utilities, copy and paste the first one into the window that pops up, and hit the return key. When the Password: prompt pops up, carefully type in your admin password, since nothing shows on the screen, and hit the return key. Copy & paste the other two, one at a time, following each with hitting the return key. You won't get the password prompt, since the initial one's good for five minutes.
Quit the Terminal app and you should be able to read and write to the ext HD. This assumes there's no OS or Time Machine backup on the HD. If there is, don't run the third command.

Updating volume purchased apps

I want to update the apps that I have imported into apple configurator. Otherwise, when I sync the apps to my supervised ipads, I have to update all the apps afterwards. When I try to update the apps on itunes, the Mac is downloading all the volume purchased apps again. Multiple copies. How does the volume purchased apps update process work? I had read somewhere that I update them on itunes, then re-import into Apple Configurator. I'm just concerned because the Mac shows that it wants to download 500+ apps that I have purchased.

I too am having the issue. I have 30 new ipads I need to image and I don't want to manually update each ipad.
It makes no sense. I'm sure I'm missing something.

HT1222 I installed the most recent ITunes update after which Itunes no longer worked.. I received an error message Error 7 Windows 193. I did a system restore to eliminate the update.

Apple support had not responded to my requests for clarification. The update corrupted both ITunes and Office Outlook mobileme. The error message when I tried to start up I Tunes was Error 7 Windows 193. I un installed I Tunes and re installed the latest ver and encountered the same error message. I finally did a system restore. Was this a one time problem or is the update bad. In over 30 years I'd never had a problem with any Apple update.

Hi Lutacrew,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

HT3576 Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?

Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?

You have a 1st generation iPod Touch. It can not be upgraded beyond iOS 3.1.3, it is available at the link below.
http://support.apple.com/kb/HT2052

TS1967 After 'updating' the newest iTunes version, I cannot sync my iPod Nano! It does not show up anymore.

After 'updating' the newest iTunes version, I cannot sync my iPod Nano! The 'old' version recognized and showed in icon to sync, but the newest version does not. Is there a way to sync the older iPods?

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID /

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID / iTunes ID are listed and the passwords are correct obviously so why can't I update my Apps? Why does my Old apple ID keep appearing and how can I get Apple to change this?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

App update available from iTunes, but not from iOS ?

Found earlier today that one app had an update available on iTunes on my PC (Windows 7) ... while it wasn't available from the app store on my iPhone. The iOS app Store kept showing the old version of that app as the latest. Had to sync the iPhone with iTunes to transfer the update. How can that happen? ... and no my App Store app on iOS is not completely broken, as it keeps giving me updates for all other apps ... so far. Meaning that my Apple ID isn't a problem either.

On the iPod open the App Store app > Updates > Purchased then redownload. If nothoing shows make sure you are signed in with the same Apple ID that the purchase was made with:
Settings > iTunes & App Stores > Apple ID

My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?

I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?

Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves

When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves. It finished backing up one then it went to a "Extracting Software" on the iTunes status bar up top and then it gave me an error saying something along the lines of "There was an error with the server" and back to square 1. Ive been trying since the morning and same problem. Always stuck on the backup, help?

You may have lost your connection to the apple server or connection with your itunes library.
1) You will need to shutdown Itunes and disconnect your iphone from the USB cable.
2) Reconnect your Iphone to the usb cable, wait for the device to be recognised and or drivers to be installed.
3) once all ok, your itunes should automatically open up/connect (if you have this setting set on), otherwise double click your itunes icon on your desktop.
4) once all sychronised and connected. go to Summary tab and UPDATE your iphone again.
Hope this works for you, as this happend to me and tried the above steps and wala!!! all good.
If the above still fails, restart your pc/apple and turn off/on your modem and then try again.
this normally happens if your connection from your device to the itunes hangs or looses its connection, or have a bad connection to the internet / apple server.
in windows the RPC Locator is normally the cause of this, in apple i have no idea (as im not an apply user).
Give it a shot!
if this helps you and works ...why not rep/like my response up!

Keyboard not responding after OSX 10.7.4 update

I have just installed the OSX 10.7.4 update.
About 12 hours after installation the screen dimmed with a message that I need to restart the computer. I did so and now after startup I get a message on the screen that the Bluetooth keyboard can't be found. I actually have a hard wired keyboard, not a Bluetooth one, but there is no response to keys on the keyboard and I can't get rid of the screen message, even after a restart.
So I can't start in safe mode or anything like that because the keyboard doesn't work. Any ideas on how to get around this?

Thanks for the suggestions, but the keyboard was connected to a built-in port.
When I came back to the computer about an hour after the problem appeared, the bluetooth message had gone and the normal keyboard was working again, so I could log in. I checked Bluetooth in System Preferences and found there was a "phantom" wireless keyboard listed, that I had never installed. I removed that from the list so hopefully the problem won't re-occur.
Not sure whether this problem was related to the update, but from other posts, it appears to have caused a number of issues.

OSX 10.4.9 Update Volume in iTunes

Similar Messages

Maybe you are looking for