OSX 10.5.2 useless after security update

Mail, Address book, Dashboard, Pages and iCal crash before even starting completely. These are the apps I tried, so there are probably others also crashing after this security update (2008-002).
My wife has a MacBookPro that continues to run well after the update. My Powerbook-G4 though is in very bad shape - I would even say useless.
I think it is very wrong of apple to release such a poorly tested software update. I know I do not have the latest laptop model, but apple said Leopard would run on a powerbook G4 and I trusted them to release Leopard updates that would not render my laptop unworkable like this.
I am very disappointed and very sad about this.
From what I hear there are lots of other people with the same problem. I just wish apple is working to fix this right away.
Does anyone know of a solution?
Thank you
Carlos
Message was edited by: Carlos Martins

Thank you for your message Malsen. I tried disk utility "verify" and "repair" - with no success.
I suspect there could be a fault in the updated software and not the hardware since all crashed threads report these same first 5 lines:
Thread 0 Crashed:
0 com.apple.CoreData 0x9050b200 -[NSSQLiteAdapter statementClass] + 0
1 com.apple.CoreData 0x90511b44 -[NSSQLAdapter newStatementWithSQLString:] + 32
2 com.apple.CoreData 0x90538ff0 -[NSSQLConnection fetchMetadata] + 164
3 com.apple.CoreData 0x904fd9f8 -[NSSQLCore _loadOrSetMetadata] + 276
4 com.apple.CoreData 0x904f6e00 -[NSSQLCore initWithPersistentStoreCoordinator:configurationName:URL:options:] + 1064
Your opinion on this is most welcome.
Carlos

Similar Messages

Rosetta Problems after Security Update 2012-001

My crack team of sys admins and I have devised a method for resolving some of the issues regarding the Security Update 2012-001 and Rosetta.
http://www.educate-it.org/content.php?130-Rosetta-Issue-after-Security-Update-20 12-001
Click this link for an Installer that will revert the files necessary for some Rosetta apps to run after the Security Update. This is a band-aid and is only recommended in emergency situations. Apple is currently working on a fix, but until that happens, we are stuck with reverse-engineering their update. I hope this helps those in distress from this update.

Backup files off the computer (not TimeMachine) and disconnect.
If you have TM, or a option key bootable clone use that to erase and restore from.
If not, c boot off the 10.6 disk, use Disk Utility to >Repair Disk and Permissions, (do not format or erase!!) and simply re--install 10.6 from the disk. Note: Does not touch your files and most programs, but backup your files regardless.
Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
Reboot and log in, update to 10.6.8, it should not include the security update at this time (second pass it might show) because it was just released and they might need to pull it. (they need to pull it)
When you reboot, make sure to reinstall any programs that installed kext files into OS X, you'll know, they won't work.
If you get gray screen, hold the shift key and update your installed software so it's compatible with 10.6.8.
Learn how to clone here
http://www.bombich.com/get_ready_for_lion.html
TM help here
http://pondini.org/OSX/Home.html
Learn how to make copies of your 10.6 disks here
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Learn which programs ARE NOT compatible with Lion
http://roaringapps.com/apps:table
Long live the Snow Leopard.

Applications not responding apparently after Security Update 2007-009

Mail, iTunes, Skype, MSN Messenger, MainMenu, Emule, Safari and god know what else aren't responding after Security Update 2007-009.
Hi,
I recently purchased a new phone that does not work with macs, so I bought an application from Feisar to make it work. The application isn't freeware, so I think it is very unlikely that it bogused my system. Anyway, I installed the software, but only afterwards noticed it didn't work for my phone model with the USb interface, only through bluetooth, which I don't have. Moreover, and, in my opinion, more importantly, I also downloaded and installed security update 2007-009. After the update, I mandatorily restarted OS X and instantly noticed Mail, iTunes, Safari, Skype and Messenger not working. I click on them on the dock, they bounce (usually once, but it has occured to be more) and nothing happens. I don't get the little arrow below the icon. I see the applications in the applications folder, so they are not missing. I searched and searched on the internet and, apparently it is, to say the least, herculeanly complicated to downgrade from a software update. I tried to repair permissions and it didn't work. I tried the apple hardware test and everything came out perfect. I restarted many times and the same keeps happening.
So I wasted half my day yesterday trying to fix this, looking into forums and trying to talk to people about it and there it absolutely no answer. Yesterday I installed the programs necessary to sync my phone in my wife's macbook and nothing bad happened. So I'm guessing it isn't about the phone plugins I installed. I've tried to download combo updates but they crash as soon as I try to install them - I even tried to install a 10.4.10 update.
This is the error message I get:
Command: Installer
Path: /Applications/Utilities/Installer.app/Contents/MacOS/Installer
Parent: WindowServer [114]
Version: 2.1.9 (104)
Build Version: 36
Project Name: Installer
Source Version: 1040000
PID: 603
Thread: Unknown
Link (dyld) error:
Symbol not found: _WebCoreUnicodeDirectionFunction
Referenced from: /System/Library/Frameworks/WebKit.framework/WebKit
Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
/System/Library/Frameworks/WebKit.framework/WebKit
I put part of in on google to check if there was anybody discussing anything related and someone suggested - bizarrely enough - updating adobe reader. I did it just in case and, of course, it didn't work. I repaired permissions a million times already, I rebooted in safe mode, I scaned the computer with apple jack (which reapetedly said that I had a "fan failure!"), I verified the disk with diskutility - which showed nothing. I tried downloading an anti-virus (ClamXav), but I couldn't open it also, I trashed my prefs, I deleted all internet plugins, but still.... nothing.
The most likely line to follow here is the "fan failure" message in apple jack. I looked inside my g5 and all fans except for the one close to the Hard Drives aren't spining. I'm not sure this means they aren't functional or whether the temperature isn't high enough for it to be turned on. Temperature must be around 26-28 degrees Celsius today. There is nothing on the internet about that fan failure that's close enough to my case.
I'm about to quit and take it to the very expensive - yet reliable - authorized tech support apple has in Rio. Any ideas, anyone?

Maybe it is a security update thing! I have had similar troubles with my CS2 and other simple apps like TextEdit not opening, just doing that single bounce... I have tried EVERYTHING and now, after reinstalling my entire system, have lost access to my own user profile.
I'm assuming you have tried starting up with your original system install disk in the computer, while you turn it on, hold the option key, it will allow you to run another hardware check, as well as to do an archive install if it comes down to that.
good luck, please let me know if you find out something else that might be causing the problems... i've noticed that alot of mac threads have similar probs listed.

Keyboard, keypad glitch after Security Update 2015-002

The overview is: keyboard problems developed shortly after Security Update-002 on Mavericks 10.9.5. I tried OS update to Yosemite; didn’t fix the problem. Reverted OS back to 10.9.5 using Time Machine for a backup date prior to the Sec Update; this fixed the problem.
Mac mini5,2, 16gbram, wired Apple Pro Keyboard (M7803, circa Mac Cube), Apple Wireless Keyboard, LMP Wireless Numeric Keypad, Apple Magic Mouse (A1296?) iPad 2
Within the past 2 days, Apple BT keyboard alpha keys stopped typing. During troubleshooting, I discovered that problems extended to BT keyboard, BT keypad, and wired spare USB extended keyboard. The BT keyboard pairs and works fine with my iPad. Here’s a list of the glitches:
Apple Wireless keyboard:
alpha keys NO INPUT
space key NO INPUT
Delete key works
Force-Quit sequence works
fn, cntrl, opt, Apple, arrow keys, shift all work
top row keys work
LMP Bluetooth keypad:
keypad: 1..4, 6..9 NO INPUT
keypad "5" registers a mouse click, NO INPUT
keypad "0" jumps to mouse cursor first press only, NO INPUT
=/*-+ and arrows work
Apple Pro USB extended keyboard:
num keys: 1..4, 6..9 NO INPUT
keypad "5" registers a mouse click, NO INPUT
keypad "0" jumps to mouse cursor first press only, NO INPUT
alpha keys and number row keys work
keypad =/*-+ and arrows work
Besides proving the wireless keyboard works on my iPad, I reset PRAM with no improvement. (I had no problems with my Bluetooth Magic Mouse.)
Next step was OS upgrade via Software Update to Yosemite. All above glitches remained.
Next, I reverted to Mavericks 10.9.5 using a Time Machine OS backup dated prior to 9Mar15, the date of Security Update 2015-002. After this, both keyboards and keypad resumed working. Seems clear that the Security Update is the culprit, no?
I reported the issue to Apple via Support Chat.
I would like to eventually upgrade back to the Security Update and Yosemite but not when it breaks my keyboard. Perhaps I could skip over the Sec. Update and go to Yosemite? Any suggestions?

Update:
The day after I reverted to 10.9 to repair keyboard glitches caused by Security Update 2015-002 (and persistent in Yosemite), Apple released Security Update 2015-004. Such a quick succession of -004 on top of both -002 and -003 was the hint to me that -004 contained fixes to the glitches.
I crossed my fingers and jumped back on the install-wagon. Yosemite 10.3 completed its second installation and my keyboards/keypads remain functional!

Kdcmond could not launch, after security update Nov 09,OS 10.5,Powerbook g4

Powerbook G4 will not boot past the grey screen with spinning wheel after latest security update from Apple.
In safe mode: kdcmond could not launch is reported.
I DO NOT HAVE EASY ACCESS TO INSTALLATION DISKS.
Please post suggestions that are viable using rm or vi in safe mode.
It will take the IT department weeks to get around to fixing this so I am hoping for usable responses in the short term.
Powerbook G4 1GB os 10.5.7 to 8 Grey Screen/crash with exceptions after security update.
Took corrective actions using Disk Utility then Applejack with no success. Deleted Library/Prefernces/SystemConfiguration files: NetworkInterfaces.plist, com.apple.airport.preferences.plist, and preferences.plist to get them to regenerate. The exception is gone but now, kdcmond could not launch is reported due to no localhost name found.

No suggestions from anyone so I am giving up and returning the PC to IT. I will leave the thread open in case anyone comes up with any ideas for future reference.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
Kindly solve this issue ASAP.
Shailendra Gupta
<edited by host>

You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

Mail 2.0.5 CRASHES ON OPEN after Security Update 2005-009(Tiger Client)

I'm trying to figure out how to fix this.
I rebooted into a techtool pro e-drive and repaired permissions (as well as some other repairs to the drive, etc), but it still is crashing.
I created a new user and opened mail just fine there.
So... it is something in my account. Not sure exactly what to do next?

I'm having the same exact problem. (See Mail 2.0.5 crashes when I get new mail). I deleted my preferences & my junk mail settings, to no avail.
A remarkable number of other people are posting with similar problems, just in the past week or so alone, and as far as I can tell, no one has figured it out. There is definitely a bug here. I have a hunch that it may be related to a recent software update. I'm going to post this to the other threads in hopes of garnering some attention from Apple.
For posterity's sake, I am connecting to a Gmail account, a POP account, and a .Mac account.
See also:
Mail keeps crashing
mail 2.0.5 CRASHES ON OPEN after Security Update 2005-009(Tiger Client)
Mail crashes immediately after opening--why?
Mail Crashes CONSTANTLY!
Mail quits when launching
Mail crashes at open
Mail crashes when downloading new mail.

Printing problems after security update

Any fixes to the printing problems (for me it is with Quicken) after the security update??
Don

There are several threads popping up over in the Mac OS X v10.6 section of ASC about the Security Update.
Mac OS X v10.6 Snow Leopard: Mac OS & System Software: Apple Support Communities
It seems that the update has killed printing and other functions for some PowerPC Applications.
Start with > after Security update 2012-001 cannot...: Apple Support Communities

After Security update 2011-005 I my second monitor is black.

Hi Folks,
After security update 2011-005, I colud not get my second display working. I tried safe boot, didn't help, tried different resolutions didn't help. Reboot did not help either.
The second display is detected but it is black.
I am currently on MacOs10.6.8 running on my MacBook Pro.
Peace.

Don't remove any screws to do an SMC reset:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Usb hard drive not loading after security update

usb hard drive not loading after security update
I can't seem to find any other posts about this problem.
I have three external hard rives connect by a USB hub to my iMac.
Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly.
I get the same issue but not all the time if I turn them on before I boot the iMac.
I used the disk drive utility to "repair" the drives but they always come back as "probably ok".
If I restart the iMac with the drives connected (on), it seems to work but not all the time.
A bit annoying as I am wondering if the drives are OK or not.
I don't always need the drives as they are for backing up images from my camera using Apreture.
This all began after i did the latest security update.
is the update to blame?
mahalo.

Yes, you can still use those instructions to reset the PRAM.
You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

Can't email after security update last 48 hours

can't email after security update?
help I

See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0
https://discussions.apple.com/message/19710911#19710911
Some have reported success simply by reinstalling the update.
http://support.apple.com/kb/DL1586
Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
http://support.apple.com/kb/DL1399
I'd suggest starting with the simplest of these fixes, so look them over first.

Rosetta crashes after Security Update 2006-003

The other day I installed Security Update 2006-003, and now a number of PowerPC applications crash the machine.
It's a funny crash, the mouse keeps moving and the capslock key goes on and off, but that's it. Nothing on the screen animates or updates. Windows will not move, dock does not do anything. cannot force quit or command-tab. The only option is to do a hard reset or hard shutdown.
I found this article:
http://www.macfixit.com/article.php?story=20060517111924138&query=rosetta+crash
I hope it's fixed soon!
Matt

Hello!
I'm glad I found your post -- a brand new Intel Core Duo 20" iMac is doing the same for me after Security Update 2006-003.
What I've found on this end so far is that Norton AntiVirus 10 for Macintosh seems to aggravate the problem. I had a system that was running fine (complete with NAV10) before applying the 2006-003 update. At first I thought the problem might be due to user error--maybe NAV wasn't quite ready for Intel Macs, but Symantec says it is after you get version 10.1 from LiveUpdate. (I did.)
I finally had to erase the hard drive and reinstall the entire operating system from the provided restore discs. After I did that and got the latest software updates, I tried again with NAV. It still caused the same problem...a complete lockup.
The first time around, only NAV seemed to cause problems. Other PowerPC-native programs running in Rosetta seemed to be OK. This second time around any PowerPC-native app running in Rosetta (after the install of NAV10) would lock the machine up completely, except for the mouse pointer. (I have also noticed that the machine still responds to being pinged over the network, and that Apple Remote Desktop 3 says it is online. So the crash isn't stopping everything from working.)
So my conclusion is that there is something seriously wrong with Security Update 2006-003 and Rosetta, and it may be made worse by NAV10 for Macintosh. In any case, I'm going to steer clear of this update for now.

After updating latest security update for my OSX 10.7.5 one of my usb port is not working now.how do i know what is cause that usb port is not working after security update

one of usb port in my macbook pro havent work after i ve updated latest security update for osx 10.7.5, how do i know what is cause that usb port is good or bad

On a Mac running v10.7.2, the only way to reinstall Safari is to reinstall OS X using OS X Recovery.
Safari 5.1.1 is for Snow Leopard. It will not run on a Mac with v10.7 installed.

Problems with OSX Mavericks after security update 23 april 2014

So I ve just updated the latest security update of osx mavericks and i get a really annoying problem. My system went so slow for example when I switch fullscreen a window or back from fullscreen and the effect of apps when I open them it is slow aswell. These things are recogniseable in Safari too so I am not able to use my mac like before. Please help me find out what should I do.

Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

Multiple Errors - G5 Quad/Mac OSX 10.5.8 - After Security Update 2009-006

I'm using a PPC G5 Quad, and after I installed Security Update 2009-006, I began having problems even being able to open project files Final Cut Pro 6. So I had to force quit FCP6, but even that wouldn't close the application.
I figured the issue was probably just with the application, so I manually powered down the computer and only wound up getting two blank blue screens on my monitors when I powered back up.
Powered down again, disconnected power cord for 2 minutes, then powered back up.
Attempted to open FCP6, didn't work, wouldn't quit using "Force Quit."
Opened Motion 3 to create a new project outside of FCP6 - when I selected "Save Project As" the application became unresponsive. Would not quit even when I selected "Force Quit."
To test if there was an issue with other applications besides Final Cut Studio 2, I opened Pages and tried selecting "File->Open." This made the application unresponsive, and would not quit with "Force Quit."
I repeated this test with:
QuickTime Player
Adobe Photoshop CS
Preview
Microsoft Word
Safari
ALL of these applications became unresponsive when I tried using the command "File->Open"
I then decided to try installing Security Update 2009-005 to see if that would help.
Because Safari was locked, I downloaded Security Update 2009-005 using Firefox, then re-downloaded Security Update 2009-006.
After downloading both security updates, I manually powered down the computer, disconnected the power cord for 2 minutes, then re-powered on the computer.
I immediately installed Security Update 2009-005 and restarted the computer.
Once it restarted, I opened up Pages and was successfully able to use the command "File->Open" to open both templates and previously created files.
I then opened FCP6 with no issues, and successfully opened and re-saved an existing project file.
I then re-installed Security Update 2009-006, and re-started the computer according to its prompts.
At first, it appeared that the issues were resolved. I opened Pages and was able to use the command "File->Open" to open an existing template.
I then quit Pages and attempted to open a new Finder window. Immediately I got a spinning rainbow ball and got the message on my screen "System Failure" etc etc, and the last line read something about "Panic" or "System Panic - we're holding here..." or something to that effect. Quite strange.
I'm now in the process of attempting to repair disk permissions using Disk Utility. The permissions that seem to be out of order are with:
private/var/log/secure.log (what and where is this???)
System/Library/CoreServices/Airport Base Station Agent.app/Contents/CodeResources"
various Airport Utilities
Various FrontRow
Various backrow
Several places I don't recognize such as usr/bin and usr/sbin
And internet plugins related to FlashPlayer

How full is the hard drive?

OSX 10.5.2 useless after security update

Similar Messages

Maybe you are looking for