OSX 10.5.6, LR2.1, PS4...Printing

Just downloaded 10.5.6! PS4 printing is tack on with Epson R2880 (i.e. R2400 dark print issue). LR2.1 is not (tack on). I'm "assuming" that the impending 2.2 release will include an update to its printing that will encompass whatever Apple may have improved in Colorsync printing. If after 2.2 is released and a print from 2.2 does not equal CS4, then the issue of "dark" prints, etc will reside squarely with Adobe and LR. Stay tuned.

First install test of 10.5.6 on a partition that had the old iPF Canon version 1.30 drivers.
No 10.5.6 did not fix the forced defaulting to Colorsync.
Although I noticed one change and that is based on the media setting the chosen profile will change. This may be ok for non custom profile workflow.
The big question now is if any changes were made that screw up the latest drivers that worked correctly with 10.5.5.

Similar Messages

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Just installed mac osx snow leopard upgrade and connected my printer to it too, and realized I have no sound anymore

    Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound!   Can anyone help?

    In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade?  If so you need to update via 10.6.6 to 10.6.8.  These updates can correct minor system upsets.  
    And ... did you also repair permissions both before and after you upgraded.   You should do this when you progress via 10.6.6 to 10.6.8 too.

  • After upgrading to Mountain Lion OSX 10.8.2, my HP Photosmart printer is not working

    My HP Photosmart 380 series printer is no longer working since upgrading to the Mountain Lion OSX 10.8.2. Need to know where to find installation software and updates so that it shows as an available and working photo printer. Also need how to information to make this happen. Any and all help will be appreciated.

    Run Software Update to install the latest HP printing software. If the printer still doesn't work, follow the instructions linked below:
    OS X Mountain Lion: Reset the printing system

  • MAC OSX 10.5.8 HP C7280 not printing - communication failure

    I have a Mac OSX 10.5.8 , It has been wirelessly connected to mt HPC7280 for a long time and prints perfectly up until today. The queue shows "printing" for a while but nothing prints and then I get this messege:
    "Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."
    Tried all troubleshooting on this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&cc=us&dlc=en&lang=en&lc=en&product=320...
    Nothing seems to work. Any help would be greatly appreciated. Thanks.

    Let's reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • LR2 and PS4 - merging to HDR, merge to Panaorama and Edit in Layers not working

    Hi,
    I've recently upgraded from LR to LR2.1 and Photoshop CS to CS4. I've been trying to multi-select images from LR2 and edit them as HDR and Panoramas using the "Edit in->" merging options.
    None of them seem to work. I can see PS CS4 being opened, but then nothing happens. No image is opened or dialog box shown anywhere. Closing PS doesn't prompt for any saving, etc.
    I think the problem is because my RAW/DNG files are stored on a NAS. Trying to do the merge from PS directly using the files also doesn't work. But if I copy the files to my local HDD, then things work a lot better.
    Is this a known issue with CS4?
    iMac, OSX Leopard, 4Gb RAM.

    I have done some more tests:
    Setting up CS3 as "Additional External Editor" in LR2.1 Edit/Preferences/External Editing works fine with RAW ( .NEF ) files on NAS-drive.
    Also CS4 as "Additional External Editor" works the same way. The procedure is the same as when CS3 was the standard editor, ie exporting a TIFF file from LR2.1.
    The difference is that the standard CS4 integration is not writing TIFF files från LR, but has a more tight integration to CS4, which is much faster. But still not working when RAW files are on NAS. ( LR catalog files are on local disk ).
    Configuration:
    Dell dimension 9200
    Windows Vista Home Premium ( 32-bit )
    D-link DNS-323 NTFS file system
    Lightroom 2.1
    Photoshop CS4 Extended
    Latest updates installed.

  • I have up dated my mac to OSX 10.9.5 and now the printer is not working

    After updating my imac to OSX 10.9.5 my HP Photosmart C4580 is not working ,please advise

    Flitsch wrote:
    After updating my imac to OSX 10.9.5 my HP Photosmart C4580 is not working ,please advise
    Uninstall and then reboot and reinstall the printer driver....
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Print Preview is missing from Firefox 6 on Mac OSX Lion in both File Menu and Print Dialog Box

    The question says it all really. Print Preview option is missing from both the File menu and from the Print dialog box when you select Print. I use Print Preview a lot to avoid wasting paper.
    A relevant issue might be that the Mac OSX app Preview is currently having trouble with various printers including my Xerox and so, temporarily, the default application for all Preview items is now Adobe Reader until Apple get their act together. Perhaps this is affecting things?
    Thanks for any help

    It's moved to the PDF dropdown, "Open PDF in Preview"

  • OSX 10.6.7 screws up PDF print from preview

    Since the update to 10.6.7 we cannot print PDF's correctly any more on our Canon MP620 printer scanner hocked up via ethernet. The fonts are not correctly printed any more, the lines are of wrong thickness and some letters show wrong filled triangles.
    It is related to the update to OSX 10.6.7 and the preview app, files we could print correctly before we cannot print correctly any more. It works with Adobe reader without problem.
    Other people have reported problems with Canon printers and PDF's as well since the update.

    I just tried to print a PDF containing both TrueType and Postscript fonts from my 10.6.7 machine to a Canon IP5200 shared by another 10.6.7 machine. It printed fine.
    Then I tried to print the same file to a Canon MX300 shared by the same 10.6.7 machine. It failed to print.
    Then I tried to print a PDF having only the text "This is a test of Times" in the TrueType Times font to the Canon MX300 shared by the same 10.6.7 machine. It failed to print.
    Both documents print fine from a 10.6.6 machine to the same printers shared by the 10,6.7 machine.
    The same documents printed fine from 10.6.7 to the Canon MX300 while attached locally.
    So, 10.6.7 seems to break networked printing for some Canon printers.
    So far, I am 0 for 3 on the 10.6.7 bug issue. It is time to admit defeat. My official recommendation is to roll back to 10.6.6. I will be filing yet another bug report with Apple.

  • What usb auto switch is compatible with OSX and Windows for sharing the same printer

    I just bought a new iMac for myself to replace my old Dell PC.  My husband still has his PC with Windows Vista and our work stations are set up to share the same MFC with a Belkin auto switch.   Unfortunately that software is not compatible with my OSX and I am having trouble searching for another auto switch that is compatible with both computer operating systems.  Can anyone recommend one to me?

    Hmmm, we bought a brand new V300 from Epson and hooked it up it didn't work. We went through all the steps, downloaded all the drivers, and after several days of frustration, it still did not work so we returned it.
    Apple hasn't been able to give us technical advice, Epson couldn't help. The only scanners sold locally are the printer/scanner combos.
    I was looking at the Fujitso ScanSnap 1500M earlier tonight... am wondering if I can get by with this scanner since most of my scanning nowadays has to do with business documents. It sure would be nice to organize clutter and the text said something about compatible with the "cloud" as well.
    I use my iPad all the time to show galleries & collectors the quality of my paintings... type up proposals, etc. Thanks for letting me know about it's compatibility with my iPad, iPhone and Mac.
    Thank you for your input, AppleMan1958. you are wonderful.

  • OSX error message - the software for this printer is currently unavailable

    OSX error message when loading driver for photosmart 7520 - "the software for this printer is currently unavailable.  Please contact the printer's manufacturer for the latest software."  

    I searched the web for you and found this.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=51994...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Photosmart C5180 MAC OSX 10.9 Setup - Software for this printer isn't available from Apple.

    Can't add printer with OSX 10.9 - asking to choose a Driver with message Software for this printer isn't available from Apple.  Had been able to print with no problem until this week.

    Hi,
    Please check the printers supported list and try the following fix:
       http://support.apple.com/kb/DL907?viewlocale=en_US​&locale=en_US
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PS3 prints fine, PS4 prints too dark, same Mac

    On my G4 Mac running 10.5.5 and an Epson 4000 printer, using the latest Epson driver, prints using Photoshop CS3 look great, but the same settings in Photoshop CS4 give very dark images.
    I can run the two applications side by side comparing the "Color Settings ..." and the various options in the print dialog boxes. There appear to be very few new options. Having everything the same gives very different printed results. I've tried changing some of the new features like "Compensate for Scene-referred Profiles" and they make no difference.
    On my calibrated screen, images look identical in PS3 and PS4. Only when printed is there a difference.
    I've been using Adobe RGB 1998 color space for some time now with Photoshop doing the color management. The color adjustment switch in the print dialog box is off. I use the same printer profiles in both versions of PS.
    Any suggestions?
    Gordon

    Hi Gordon
    Just a quick shot at a solution here as it's past my bed time in the UK and I need my beauty sleep - and no Photoshop ain't that good!
    Anyway I've had the same issue as yourself but with a MacPro running 10.5.5 and CS4 to an Epson 7600 which is about the same generation of machine and driver as your 4000. Note that I also have a R2400 and a Xerox A3 Laser hooked up to the same Mac and I found the cure to my problem was to do the following:
    1. Quit Photoshop
    2. Go to System Preferences > Print & Fax
    3. Set the printer you are going to use as the Default Printer
    4. Close the System Preferences and open Photoshop
    5. Open your image and got to File > Print
    At this point make sure that the printer has been selected automatically as the default printer in the top centre of the Print panel.
    6. Select 'Photoshop Manages Color'
    7. Choose the correct paper/printer profile
    8. Click 'Print' and set the drivers Color Management to 'No Color Adjustment'
    I think this solution works by forcing the ColorSync system to choose the correct default profile for the selected print, something it seems to miss if the printer is not set as default before opening Photoshop. Hope it works for you as well, let me know if it doesn't as I may have a different solution for you.
    Nighty Night
    Jason
    Replica Imaging Limited
    UK

  • OSX 10.3.9 - Blank page when printing to HP LaserJet 2430.

    Hi all,
    I have a problem with a user who has a G5 running OSX 10.3.9.
    Initially they were able to print to the printer fine but as of Friday last week it just prints a blank page.
    The printer is setup on a print server and the Mac has it setup via an LPD queue.
    It was setup to use an HP2300 print driver and that was fine. But has since stopped working. I installed the proper 2430 driver but get the same problem.
    I've tried dumping the apple.print.*.plist preferences but still it only prints out a blank page from every application I've tried i.e. Word 2004, Text Edit, Adobe Acrobat etc...
    You can print to other printers no problem. I can also print from another identical model Mac to the troublesome printer.
    Has anybody got any further suggestions?
    Much appreciated!
    Richard

    Not sure, but look at these links.
    Troubleshooting printing issues in Mac OS X
    http://docs.info.apple.com/article.html?artnum=106714
    Mac OS X: About the Reset Printing System feature
    http://support.apple.com/kb/HT1341?viewlocale=en_US
     Cheers, Tom

  • MacBook running OSX 10.9.2 - Canon MX860 multifunction printer won't connect to wireless network

    At the same time I upgraded to OSX 10.9.2, my wireless modem/router died and I had to replace it.  Don't know which (or both) caused the problem, but I can't get my Canon MX860 multifunction printer back on the wifi network.  Has anyone solved this problem?

    I thought I would let you all know how I ended up fixing the issue on my system.
    I noticed that after some time the 'ping' would stop responding and I would have to reset the printer in order to get the ping responses again. This seemed more like a network strangness than an actual printer issue.
    So I connected to my AirPort Extreme to see if it was missing any software updates (it was not) and in the process I ended up making a couple of changes that I don't believe could be the cause of my issue, but any change made requires the device to reboot. After this, I was then able to add my printer.
    Everyone should also note that after you click on the + to Add a printer, it will take some time before the printer shows up in the Default section. So make sure you wait at least a couple of minutes for it to show up.
    So even though you may think the printer is actually on the network like I did (I could even put the IP address into Safari and access the printer configuration), it may still be a wireless network issue and not an actual issue with the printer or OSX 10.9.2 or the printer drivers.
    Hope that helps others having this same issue.

Maybe you are looking for

  • Intercompany Stock Transfer with WM

    Hi, We are doing stock transfer between companies. The steps we are following are 1) Purchase order created with order type NB. 2) Outbound delivery create which moved our stock to intrerim Storage type 916 3) Inbound delivery is created to receive m

  • Sol Man 4.0 and Reporting out to BW

    We have upgraded to Sol Man 4.0 and need to report the Change Request info, Change Document info and Transports log using an external BW box. In researching this forum, I have learned that we can export data out by activating the CRM business content

  • Bean Value display in JSP Page

    Hi, I am trying to display a value stored in my bean on the jsp page. The value is to be displayed on the initial jsp page.    public void doInitialization()           request = (IPortalComponentRequest) this.getRequest();           response = (IPort

  • Recommendations for Initialisation

    My apologies if this question is already covered in another thread. I tried a few searches and didn't find anything. When creating a class which will only have one instance in the application is it good practice to put most of the initialisation code

  • Adding meauring point and transfering total

    Hello, I have a scenario that i am trying out now.  I have a functional location hierarchy where the measuring points at the lower level need to be added up and the total transfer to the parent FL. Example. in the water treatment plant, i have a powe