OSX 10.5.8 and Microsoft Exchange 2010

Hello
Is it possible to get Entourage on Mac OSX 10.5.8 to work with A microsoft exchange 2010 server? I know it will work if we upgrade to Snow Leopard but some of our staff still have power pc macs and therefore can't use Snow Leopard.
Thanks
Gary

There is no reason why it should not work, it worked with exchange 2003 and 2007.

Similar Messages

BB Torch 9810 direct access mailbox Microsoft Exchange 2010

Hi,
Wanna check whether in anyway my BB could direct access mailbox Microsoft Exchange 2010 without BES (private and/or Company). Thanks
BR

Hi eddiesonka,
"Why" is truly a difficult question for us end users to truly know the answer to. Typically, I shy away from those since, well, not being an insider, I can only have my own personal theories. But, this topic is one that I'm OK presenting my theories on.
The basic answer is that different is different. Non-BB devices do things in their way, BBs do them in their way. Consequently, we all have choice, which is a good thing in a free market society, I think!
Unlike other devices (e.g., ActiveSync), BBs do not technically have a full on-device email client. Other devices, with a full on-device client, conduct all device to email server activities directly. BBs use the carrier/RIM hosted BIS service as an intermediary between the BB and the email server. The main benefit is one of data plan consumption. With non-BBs, the full on device email client must check the server for new email on a periodic basis (yes, I know that some services have more PUSH, but many are still PULL), generating traffic over the carrier data network even when there is no new email on the server. With BBs, that "check for new email" is done by BIS, completely independent of the BB...so no traffic to the BB is generated unless BIS finds something on the server that needs to come to the BB. For folks on limited data plans and limited WiFi access, this can become important.
So, it is up to the consumer to completely research the different choices available to them...and make their selection according to their own unique set of requirements and desires. RIM is advancing BIS...with GMail and Yahoo, there now are some calendar and contact OTA synchronization capabilities that did not exist in the past. With luck, they will continue to develop BIS and enable more and more OTA functions to BIS-level customers -- while, of course, at the same time, preserving their dominance in the mobile security world! And remember, for enterprises, RIM has made BES-X totally free...
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Configure sharepoint 2013 with Microsoft exchange 2010

Hi,
I am want to configure SharePoint 2013 with Microsoft exchange 2010.
Please let me how can I integrate these server to Send/ Receive domain E-mails.
Thanks,
C Mahone

For email integration there really isn't anything special about Exchange 2010 vs. any other mail server. Check the links here on configuring Incoming and Outgoing mail in SharePoint:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

"Microsoft.Exchange.2010.Reports.Transport.Platform.TopUsers "Report show no result

hello,
i have an issue in my SCOM 2012 report.when i go to
Reporting --> Exchange Server 2010 Report Library-->and open the report Microsoft.Exchange.2010.Reports.Transport.Platform.Top users.
in my scom 2012 console and execute the report for top users on the basis of Messages Send or Messages Received ,it return zero result.
thank you

Hi,
Blank reports can be a common issue with System Center Operations Manager. These are caused by many different reasons, and for the focus of this article we will discuss the following:
1. The wrong type of entity was selected as the report target.
2. The corresponding performance collection rule or the script that generates the performance data is not enabled for the report target.
3. There is a functional problem with the Health Service on the agent.
4. Management servers are unable to insert data into the OperationsManagerDW database.
5. Data is stuck in the staging tables in the OperationsManagerDW database.
More details:
https://support2.microsoft.com/kb/2573329?wa=wsignin1.0
In addition, it is suggested to configure the Exchange management pack according to the mangement pack guide.
And here are two links that should be helpful for you regarding to this issue, please refer to them:
http://zoomindia111.wordpress.com/configure-exchange-2010-sp1-management-pack-in-scom-2007-r2/
http://blogs.technet.com/b/emreguclu/archive/2011/09/26/empty-exchange-2010-server-statistics-mailflow-reports-if-default-log-directory-has-changed.aspx
Regards,
Yan Li
Regards, Yan Li

My macbook air cannot sync with my office microsoft exchange 2010 mail server

My macbook air cannot sync with my office microsoft exchange 2010 mail server.
It used to work perfectly, and then I lost connection and was never able to establish one. I re-istalled my e-mail account several times, no success.

I am sure all of you got your email issues sorted out by now but i was having trouble settings up exchange email on my Iphone 5S, and the problem i found was to go to settings, icloud, then log into icloud with your apple id first (before setting up the exchange email). Once i logged into my icloud account on my Phone 5S, the exchange server email starting working and synching right away.
to confirm this worked, i even deleted my email account and deleted my Icloud accounts both from my iphone was able to simulated the same exact problem (exchange server would not sync with my Iphone 5S) until i logged back into my Icloud account on my 5S.
Again once i logged into Icloud, the exchange server issues went completely away.
Just wanted to post this so anyone else having the issue could see.

Blackberry Curve and Microsoft Exchange

I'm not sure if I'm in the correct forum or not, but I have a question about Blackberry and Microsoft Exchange.
Do I need a Blackberry Server in order to synchronize to my MS Exchange Server? I know I can get my email to synchronize using Outlook Web Access, but this doesn't help with my calendar.
Any suggestions?
Thanks in advance,
Ray

A BES would get the job done, but you could also use the desktop manager and just sync it over the wire. Also might want to look into the microsoft redirector
If someone helped you give them kudos. Research all info!

Oracle alerts and microsoft exchange server

Hi,
We are working on Oracle Applications 11i (fail over on 2 servers) which is installed on Solaris 64 bit .
AND I am trying to configure Oracle Alerts with Microsoft Exchange Server.
I am following the note: Oracle Applications And Microsoft Exchange Server-Interoperability Guide.
At the step of configuring the exchange Server I need to know the account used to run the Concurrent Manager service.
How can i check that?
Thanks.

Hi,
At the step of configuring the exchange Server I need to know the account used to run the Concurrent Manager service.
How can i check that?Most probably it is applmgr user.
To verify, issue "cd $COMMON_TOP/admin/scripts/<CONTEXT_NAME>", then "ls -l adcmctl.sh". This should should the OS owner of the script (the OS user which is used to start the CM). Or, you could check the value of the "s_appsuser" context variable in the application context file to determine the user.
Regards,
Hussein

Migrate to internet explorer 8 and microsoft office 2010

Hi Guru,
We want to migrate to internet explorer 8 and microsoft office 2010 .
Is it compatible with adobe interactive forms ? did we install a new sap note ?
o
Thanks a lot
Soufiene

compatiblity of adobe interactive forms has no relation of which IE version, which MS office version you are using/migrating.
it only concerned with which Adobe reader, Adobe Livecycle designer, ADS version you are using.
regards,
BJagdishwar.

Microsoft Exchange 2010 and Outlook 2013

My colleagues computer suddenly crashed yesterday and it wouldn't restart without a system restore.
Now when we try to open up Outlook it says that you must connect to Microsoft Exchange at least once before you can usse your Outlook Data file (.ost)
Also The PC has lost the trust relationship on the domain
We have exchange 2010 and the servers OS is Microsoft Windows Small Business Server 2011 and the Client PC is running off of Windows 8.
Can you please help me resolve this issue?
kind regards
Steve Bradshaw
[email protected]

It might be possible that the MAPI key (which enables Outlook to synchronize with Exchange) has been deleted due to the System crash. So, in order to establish the connection, you need to Reconnect the OST file to the original MAPI profile and then reconnect
then MAPI profile to Exchange Server.
If the above method fails to resolve the issue, then the best option for you would be to take the help of any professional OST to PST Conversion Software, which will help you to Extract data from your OST file and convert it to PST file which you can import
back to your Outlook to establish the connection with Exchange Server again.
You can check this
presentation for more info.

Mailbox Move Issues and Errors - Exchange 2010 to 2013

I'm trying to move mailboxes from 2010 to 2013, but I'm experiencing a lot of issues.
My move batches keep hanging (stalled) for minutes and hours on end, and I can't seem to keep them going consistently.
I have two DAG's, one for Archive boxes, and one for Primary mailboxes. Each DAG has three members with DB copies of each DB. The npdes and the clusters themselves are up and healthy. However, at random some of the DB's Content Index state will go to Failed
or SuspendedandFailed. At which point I force a catalog refresh and DB index update, and it goes to healthy.
I've created the "ContentSubmitters" AD group (and assigned it permissions), reset the Search and Host controller services on each server, and restarted the Replication service. I also deleted and recreated the Index for each DB prior to restarting
services. No dice. I've also already moved the system mailboxes over to the 2013 databases.
I'm also getting some "Transient" errors in the user move log, things like this:
Transient error ResourceUnhealthyException has occurred. The system will retry"
5/4/2014 8:43:55 AM [exmb1] The job encountered too many transient failures (60) and is quitting.
5/4/2014 8:43:55 AM [exmb1] Fatal error ResourceUnhealthyException has occurred.
Error: MigrationPermanentException: Warning: Target mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible. Error details: The store ID provided isn‎'t an ID of an item. --> MapiExceptionNetworkError: Unable to open entry ID. ‎(hr=0x80040115, ec=0)‎ Diagnostic context: Lid: 45025 Lid: 45345 StoreEc: 0x80040115 Lid: 22894 Lid: 24942 StoreEc: 0x80040115
Any ideas would be appreciated!!!

Hi
I would suggest you to run the below command for this "My move batches keep hanging (stalled) for minutes and hours on end" issue and see the result
Get-MoveRequest -Identity "Mailbox Name" | Get-MoveRequestStatistics -IncludeReport | FL Report
Just check if the MRS health is fine by running the below command
Test-MRSHealth -Identity "CAS Server" -MonitoringContext $true | Export-CliXml "C:\temp\CAS_MRSHealth.xml" and look at the xml file to get more information
When I run the Test command against either of my CAS servers, I get: " 'EXCH1' does not have the right Exchange Server version or role required to support this operation."
Run i run that command against any of the mailbox servers, it completes and generates the XML file, but I'm not sure what I need to be looking for within that file.
The first command spits out a ton of data, here's a little excerpt:
5/5/2014 8:59:28 AM [exmb1] Transient error ResourceUnhealthyException has occurred. The system will retry
(2/60).
5/5/2014 9:00:02 AM [exmb1] The Microsoft Exchange Mailbox Replication service 'exmb1.contoso.com'
(15.0.847.31 caps:03FF) is examining the request.
5/5/2014 9:00:07 AM [exmb1] Connected to target mailbox 'Primary (072dc240-bd79-495c-b7f2-c571e8f910f2)',
database 'newmbi', Mailbox server 'Exmb1.contoso.com' Version 15.0 (Build 847.0).
5/5/2014 9:00:07 AM [exmb1] Connected to target mailbox 'Archive (812ee554-4a1e-4feb-b591-a435fcbdee16)',
database 'newarci', Mailbox server 'EXARC2.contoso.com' Version 15.0 (Build 847.0), proxy server
'EXARC2.contoso.com' 15.0.847.31 caps:1FFFCB07FFFF.
5/5/2014 9:00:07 AM [exmb1] Connected to source mailbox 'Primary (072dc240-bd79-495c-b7f2-c571e8f910f2)',
database 'exmbi', Mailbox server 'Chsexmb2.contoso.com' Version 14.3 (Build 181.0).
5/5/2014 9:00:08 AM [exmb1] Connected to source mailbox 'Archive (812ee554-4a1e-4feb-b591-a435fcbdee16)',
database 'Exarci', Mailbox server 'CHSEXARC1.contoso.com' Version 14.3 (Build 181.0)
5/5/2014 9:00:12 AM [exmb1] Request processing continued, stage LoadingMessages.
5/5/2014 9:00:36 AM [exmb1] Messages have been enumerated successfully. 6657 items loaded. Total size:
332.3 MB (348,411,982 bytes).5/5/2014 9:06:14 AM [exmb1] The long-running job has been temporarily postponed. It will be picked up
again when resources become available.

Move existing Exchange 2010 server to new hardware and reinstalling Exchange 2010

Hi so as the title states I need to Install Exchange 2010 on a brand new 2008R2 Server and transfer everything from the old Exchange Server.
Couple things though.
Existing 2008R2 Server w/ Exchange 2010 is also a Domain Controller.
Exchange needs to be uninstalled completely once Exchange is setup and going on new hardware.
Existing 2008R2 Server needs to stay up and stay a domain controller.
Questions are how do I go about this step by step?
Am I going to have problems uninstalling Exchange from the Domain Controller? Will this mess up anything with the Schema?
Any how to guides would be great. New Server will of course have a different name than existing Domain Controller server.
Any questions let me know.
Thanks!

Hi,
Here are the steps about moving the Exchange server to a new server which isn't a domain controller:
1.Install Exchange Server on a different computer.
2.Use Move Mailbox in the Exchange Task Wizard to move any existing mailboxes from the domain controller to the new Exchange server.
3.Rehome any public folders and roles held by the old Exchange Server computer to the new Exchange Server computer.
4.Uninstall Exchange Server from the domain controller.
http://technet.microsoft.com/en-us/library/aa997407(v=exchg.80).aspx
http://technet.microsoft.com/en-us/library/aa997060(EXCHG.80).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

SBS 2011 and upgrading Exchange 2010 to enterprise

Hi All,
We have A client running exchange 2010 on sbs 2011.
The client would like to upgrade to exchange enterprise so in place archiving can be used.
Can someone tell me if this can be done with our current install - and what it is I need to purchase to allow it do be done.
As I said above its exchange 2010 running on SBS 2011. Outlook 2013 and 2010 is used.
I'm sure this has already been asked at some point, but i just need a clear answer of what my next step is.
Thanks in advance.

Hi:
You need to purchase Enterprise CALs and key in the quantity and license number:
http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx
You only are required to do this for the users that want/need the additional features.
Larry Struckmeyer[SBS-MVP] If your question is answered, please mark the response as the answer so that others can benefit.

Microsoft Exchange 2010 / Office Pro 2013 - Contact Issues

Good Morning Everyone.
We are running MS Exchange 2010 and have recently upgraded all our clients to MS Office 2013 Pro from Office 2007.
We've had problems with people being able to access previously accessible share folders etc. but we've managed to resolve them. What we are having problems with are peoples personal contacts....
Within Outlook If we click "New Email", then we click "To", choose address book and select "Contacts" (Personal contacts) we receive the error:
"The Address list cannot be displayed. The contacts folder associated with this address list could not be opened; it may have been moved or deleted, or you do not have permissions. For information on how to remove this folder from
the outlook address book, see Microsoft Outlook Help"
The unusual thing is, if we go to the people tabs at the bottom (Mail, Calender, People etc") Then we can access the address book without issue?
Any help would be appreciated, this problem is on every single client...
Regards
Steve Skingle

Hi,
Please make sure the Contact folder is enabled as an email address book in Outlook. We can check this by right-clicking on the personal contact folder, select
Properties, then Outlook Address Book tab.
Check if the “Show this folder as an email Address Book” option is ticked. If not, tick it and restart Outlook to check the result.
Please let me know the result.
Steve Fan
TechNet Community Support

TS4438 iOS 6 and Microsoft Exchange: Meeting events unexpectedly canceled

We had a meeting cancelled by an invited member and not the meeting organiser. It was a recurring meeting and the entire series was cancelled and a notification sent to all invited members. The user who 'cancelled' the meeting and the meeting organiser do not have any share permissions to each others calendar.
We are also having recurring meetings disappear from our iPhones/iPads, but can be viewed on Outlook.
Is there a workaround for this issue, especially for the users who travel most of the time and do not have access to Outlook at all times?
We are using Microsoft Exchange 2003, all services packs and patches have been installed, and IOS 6.1.4.

We also just saw this today, and we are running Exchange 2010 SP2 RU6 And Outlook 2010 (64bit) and it happened on an iPhone running iOS 6.0.1. We've had a number of issues with iOS devices corrupting the MAPI info for the organizer and corrupting our meetings, initially it was though that was fixed with iOS 6.1.3 but no go, it's still an issue (that started with iOS 6.0.1.)
http://support.microsoft.com/kb/2768774
However this behavior with the invited member (who declined from his iPhone) being able to blow the whole meeting for all invited members is a new one... We're working on a plan to update to Exchange 2010 SP3 to address the issue linked above, will re-post back here if that also resolves this new issue.

Help Please Blackberry Z10 and Microsoft Exchange

Hi I have been a happy BB user for many years and was happily using a BB torch on Vodafone for last 3 years. Several mail boxes set up on phone, usual hotmail , gmail as well as office mail boxes via Microsoft exhange. Have never used BES
Upgraded to a Z10 and spent 3 long frustrating days trying to get the phone to talk to my SBS 2011/ Exchange 2010
Active Sync didn't work and every other attempt failed. We actually had a Microsoft engineer on site who also failed, yet connected his iphone in about 20 seconds
After many lengthy telephoe cnversations with Vodafone, their second tier technical support told me that there is a software issue and it is not possible to send and receive email for exchange mailboxes on the Z10 without BES software. I was told that this was a known issue and there would be a fix within a month. That was 2 weeks after the Z10 was launched, it's now nearly June and there still seems to be no fix in sight.
Does anyone out there know anything about this ? Is it a network specific issue with Vodafone ?
I returned the phone as it was useless if i couldn't work with my office email and went back to my trusted Torch - it is no falling apart and I need to upgrade to something very soon - getting very close to moving to a Galaxy.. Help.....

Mrhappyperson wrote:
Vodafone have been very specific that it is not possible to configure the Z10 to work in conjunction with an exchange server without runnig BES, which we don't.
The statement, made that simply, is definitely not accurate. Exchange can face OWA to the Internet, and ActiveSync can be activated within OWA, with which a Z10 (generically speaking) can indeed integrate to. But, you've still not revealed what you face to the Internet, so it's only possible to talk generically for your situation...not specifically.
As the other contributor stated, they have BB10 OS 10.1, which seems to have in their case broken this particular function. You've not stated your BB10 OS level, so all we can work from is the generic information...which is indeed that it does work (generically speaking). If you also have updated to BB10 OS 10.1 and this issue might be the same for you, but here too lacking your details makes it impossible to know for sure.
Nevertheless, Vodafone is your formal support entity...and I would defer to what they are telling you, especially since you have revealed to them the specifics that you continue to hold back here.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

OSX 10.5.8 and Microsoft Exchange 2010

Similar Messages

Maybe you are looking for