OSX 10.5.8 photosmart 7525 needs osx 10.6

have older mac running 10.5.8 bought new HP/Photosmart 7525 last weekend trying to set up /not compatable with me O/S need to run on OSX10.6 NEED HELP  ANY sugestion short of buying new mac

Unfortunately, you will not be able to use this printer with your computer
It's just not compatible. There is no way to get around that. 
Sorry,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • How to print in grayscale using osx 10.9.3 with HP photosmart 7525?

    How can I print using black ink only/grayscale using osx 10.9.3 and HP photosmart 7525?  thanks for your help

    Hello IKR, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are looking into your printer options.  I would like to help.
    I would recommend following the steps in this Apple thread on How do I print only grayscale?
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Photosmart 7525 won't scan to mac...HELP!

    I recently bought an iMac (OSX 10.9.4) and an HP Photosmart 7525 e-all-in-one printer.  The print and fax work fine, but I cannot scan to my computer. 
    I've installed the HP software from the HP download site, but I still get a message on the printer that says "No computer is connected"  How do I fix this??
    This question was solved.
    View Solution.

    Hi @mfspectrum, 
    I see by your post that you are unable to scan. I can help you with this.
    Enable the scan to computer settings. A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning. Go to Solution two: Check the Scan to Computer setting, Step one: Check the Scan to Computer setting.
    Check the driver name that is installed for the printer. The Airprint driver might be installed instead of the Printer's driver. (usually defaults to Airprint)
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
    If the printer name shows Airprint then that is the Apple drivers, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    Try and scan again.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Compatibility of using Photosmart 7510 printer with a Photosmart 7525 printer from the same computer

    Before installing, registering, and setting up my new HP Photosmart 7525 I need to know whether I can keep using my 2 year old HP Photosmart 7510 and its software on my computer and whether this would cause a conflict.  My 2 year old Photosmart 7510 works fine and I want to  use the Photosmart 7510 and the Photosmart 7525 both from the same computer and network without conflict.  And if a conflict would be probable, is it necessary to remove the Photosmart 7510 software before installing the software/drivers for the Photosmart 7525?

    Hi,
    You can install more than 1 printer to your computer. They will share few folders including HP Photo Creations product but they should live harmony together.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Photosmart 7525 e wakes up from sleep on its own hourly.

    My Hp Photosmart 7525 wakes up from sleep mode approx. every hour. It is set up as wireless and usb. is there some setting or update that I need to apply to fix this problem?

    Hi DanHannon, Welcome to the HP Forums!  I understand that your printer is waking up from sleep on its own hourly. I would try the following: 1.) Update the firmware. Getting the Latest Firmware and Product Updates. 2.) Plug the printer's power cable directly into the wall outlet, not a surge protector. Hope this information helps, and have a great day.

  • Efax photosmart 7525. How is it done

    We purchased a photosmart 7525 from HSN. We received it in January 2014 but was waiting for the ink to run out on our old hp printer. Well we started using the new 7525 in the middle of May 2014 . Now the story behind this printer was my wife saw an HP on HSN and the one feature we were looking for was E fax. So we purchase it only to get a notice from HSN that it was no longer available. So some time passes and the 7525 comes up for sale thinking that this was the same printer. But now we find out after the fact the this printer doesn't support E fax. My question is are there any free Efax services that will work with our printer. We only send 1 or 2 fax a month and would only need to send them.
    Can any one help.

    Hello,
    The below document should provide info on efax and supported printer model. Unfortunately this model is not in supported list. Sorry about that.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c03102078#N91
    I work for HP but my posts and replies are my own.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • PhotoSmart 7525 printer/Can't get a code to set-up eprint

    When I try to get a code to setup eprint, I get a message saying I need to upgrade. When I accept terms and tell it to automatically update, I get an error message saying there is no internet connection.
    When I run a report, it says the internet is connected.

    HI ButterflyWV,
    Welcome to the HP Support Forums. I see that you are getting a connection error message when trying to enable the web services of your Photosmart 7525 printer.
    Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post that has the steps, with screen shots, on how to do this. Please don’t fret that the screen shots are a Photosmart 7510 printer, the steps are the same.
    Have a good weekend.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • MacBook Pro Running With Yosemite Isn't Seeing Photosmart 7525

    Things I've done: Restarted the laptopReset the printing systemRepaired the disk permisssion in disk utilityPrinted wireless network test results The printer is connected to the internet wirelessly and can see all available wireless networks, so I know that's not the issue.

    Hi , Welcome back to the HP Support Forums! I see you are not able to print to your HP Photosmart 7525, because your Mac running the Yosemite 10.10 Operating system is not seeing the wireless printer. I see you have done a few things with no success. Let's go ahead and try a different approach although some steps may need to be repeated please do ALL in order: Scrub/ Uninstall • Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
    • Click continue, click on one of the printers in the list.
    • * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
    • Click uninstall. Reset Printing System 1. Click the Apple icon (   ), and then click System Preferences.2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.3. Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…4. Click OK to confirm the reset.5. Type the correct Name and Password.6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.. Repair Disk Permissions 1.On the Dock, click Applications, and then click Utilities.2.Double-click Disk Utility.3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").4.Click the Repair Disk Permissions button at the bottom of the window.5.Once the repair is complete, restart the computer.Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions: HP Officejet Pro 8600 series Full Feature Software and Drivers Now, if you are still unable to see the Printer, continue here: Printing Over a Wireless Network with Apple's AirPrint FAQs, check out the 'No air printers found' section. I hope this helps, please let me know the outcome! Thanks,

  • Photosmart 7525 Windows 7 How can I choose to print in black only?

    HP Photosmart 7525 All-in-one printer. Windows 7 software.
    Is there a way to choose to print text in black only, even though there may be color on the page? When I choose to print from Microsoft Word, it does not give me an option, and I can't find reference anywhere in instruction manuals. Can someone help me please?

    Hi,
    The are 3 options for Grayscale/Greyscale:
    None (or Off): print in colors (including black )
    High Quality grayscale: mixing all colors to make black & white
    Black Ink Only: Use black in only to print.
    You can set one option as default and change each print job to meet your need. Please use the following steps to set default:
    Double click printer icon on desktop,
    Click Advanced in Paper/Quality tab
    Select the one you want (above list)
    Click Apply/Ok to get out.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Remove apps on photosmart 7525

    How do I manage apps on the photosmart 7525?  They are annoying and I don't need them.
    Thanks

    Hi,
    Please use the following link (under "Manage Print Apps" to cancel/remove it:
     http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&cc=us&dlc=en&lc=en&product=5058336&tmp...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Hp photosmart 7525 paper width guide became loose. How can I put it back on track?

    While adjusting my paper width guide it became loose.  I have tried everything to reattach it.  One part slides into its track, but the front part refuses to stay where it should.  How can I put it back on track?

    Hello @Pearlb12,
    Thank you for visiting the HP Support Forums! I see the Paper Width Guide is loose on your HP Photosmart 7525 and you would like to put it back on the track.
    I suggest contacting our technical support at 800-474-6836, as it is the hardware, you may need the piece replaced or printer. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Printhead / ink issues with 5-month-old Photosmart 7525 printer

    It seems that my HP printer "bad luck" has not changed -- at all! After having lots of issues (and not being able to resolve them with a Photosmart 6515 this summer), I bought a Photosmart 7525 in July.
    I do not print photos or color ink a lot, but when I do, I need for the color and quality to be very good. But it seems that I cannot rely on my HP printer to do that for me. I end up spending hours of time just TRYING to get something to print. I end up wasting a lot of ink and paper, but usually still have a less-than-satisfactory result -- if I'm able to get anything to print at all!
    Two weeks ago, my daughter needed pictures printed for a school project. The pictures started to, print, but then it looked like some of the ink colors were running out. However, the ink status said the ink cartridges were fine! I replaced several of the ink cartridges anyway, but still the photos WOULD NOT print out correctly. I ended up having to save the photos to a thumb drive and take them to a drug store to get them printed for her project. After that, the printer would not even print BLACK ink!
    However, the next day, the printer started printing color again - mysteriously.
    Yesterday, I had some more photos to print. I had the same issue. The first photo printed fine, but after that, only the first third of the photos would print -- the rest were missing part of the other colors. My printer did not show any low ink -- at all. I had all "genuine" ink cartridges, too! I've never used anything except HP ink.
    I am beyond discouraged! I actually talked to an HP rep at Best Buy yesterday, who recommended an HP Envy printer, but it is a tri-color cartridge. He said the problems with 7520 series were because of the way the printhead is designed (really)!
    So I'm ready to just buy a B/W laser printer and give up on ink jets. I wish I could get by without even having a printer at home, but now the schools expect us to print out everything at home these days that they send us via e-mail. Since I end up having to go elsewhere to print photos anyway, maybe I just need to forget about printing photos at home entirely.
    So I will be returning my printer. If anyone has a suggestion on what to get in its place, please let me know. The 7525 was almost $150, so it was not a cheap printer.

    Thanks for your help RnrMusicMan, but I've already returned the printer to Costco, and they did refund my money.
    The printer was only five months old. This is the third Photo"smart" printer I've had major issues with in less than four years. I guess I'm not very smart to keep trying -- or hoping for a different result.
    Unfortunately, I still have a bunch of 564 ink cartridges that I can't use -- some I opened trying to get this printer to work, and some unopened.
    I bought an HP Envy printer on Sunday from Costco that takes the 61 XL cartridges, but I took it back yesterday without even opening the box. My spouse told me I was crazy for even thinking about trying again. And with a tri-color cartridge, it will just be a problem with one color running out.
    So for now, I'll just use our old Kodak printer or plan a little further ahead and have the photos printed outside. Every time I have a project to print, my HP printer does not print for me. I spend hours of time, waste lots of ink, paper and money, and still end up having to go elsewhere to get them printed. So, I just need to do that and forget about printing them from home!
    The HP rep that was at Best Buy suggested for me to return the unopened ink to Wal-Mart for in-store credit. I tried to return two yesterday, but that didn't work. They only exchange ink cartridges, not return them. So, now I'm probably on some list with them, too!
    So thanks for offering to help, but I'm done with trying to make an HP printer work for me at home.

  • My iPhone cannot find my AirPrint printer HP Photosmart 7525.  What do I do?

    My iPhone and iPad cannot find any AirPrint Printers.  MY HYP Photosmart 7525 is AirPrint compatible, what can I do?

    Hey kennethfrommascoutah,
    Thanks for using Apple Support Communities.
    Since you are having trouble using AirPrint follow this section of the article.
    About AirPrint
    http://support.apple.com/kb/ht4356
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    Have a nice day,
    Mario

  • Fax from computer to photosmart 7525 gets cancelled after spooling

    I can fax directly from printer, but when I use the HP software or print function on the computer to set up fax and send, the progress goes from spooling to cancelled without any error notices. I have a Dell XPS 8500 running 8.1 and Photosmart 7525 connected by USB and wirelessly. They communicate just fine with the scan and print functions. Both are current on updates using the check for updates utility. I have a dedicated Voip phone line from Comcast and ther most current modem that I have slowed through the fax settings. I've spent hours reading forums on HP and Microsoft searching for exactly this issue. Please help

    Hi @xskilledtrades
    The truth is, I don't know what is causing the fax from computer function to fail. I understand from your description that the fax is cancelling after spooling, but that you can print and scan just fine as well as fax directly from the printer. I suspect the issue has something to do with the driver, thus I suggest we remove the driver and reload it.
    Please use the following steps to delete the printer/fax from device and printers, and the driver from the server properties.
    1. In the ‘Devices and Printers’ folder
    2. Choose ‘Print server properties’.
    Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
    Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
    Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
    3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
    4. Choose the printer you want to uninstall and click ‘Remove’
    5. Choose 'Remove driver only'
    6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
    If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed.
    If the you continue to get an 'in use' message follow the steps in the document here; The Specified Printer Driver is Currently in Use
    After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software (or the printer icon).
    The Setup and software screen will open and you can click on Connect a new printer.
    Thanks, I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My new hp photosmart 7525 won't print

    my new hp photosmart 7525 won't print and says it is "offline". In addition, the tray app error keeps coming on. I uninstalled my old printer. I have Vista.

    Hi @hannabanna 
    I would like to help you print to your 7525. Let's first address the tray app error, then we can focus on the printer offline message.
    The tray app error seems to be stemming from the older software you have uninstalled, it appears something did not fully uninstall. Please complete the following steps.
    Please note; I simply choose the printer I did for steps 3 because of the version of software, we will not be installing this printer, I only want to use it to perform a comprehensive uninstall.
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Download the software and choose to save as, save to desktop > HP Photosmart C7280 All-in-One Printer
    After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
    Look for, and open the folder starting with 7z (Example: 7zS2356)
    Open folder Util
    Open folder CCC
    If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /unregister, and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /regserver, and then click OK
     *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
    Restart the computer
    Download and run the HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    Step 14 will help you to re-install the 7525. Once the 7525 is re-installed, please try printing. If you get the printer offline message, use the following document; 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    Please let me know if this resolves the issues, and or is you require further assistance. If you still get the tray app error, please let me know which printer you had before that you recently uninstalled. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • Oracle 8i CORBA and Visibroker

    Hello. I am trying to get a Visibroker client to talk to a CORBA server deployed in Oracle 8i. This is being done to test the interoperability between the two ORBs. Does anyone have a sample code for the client ? Thanks, Santosh.

  • Delivery Note Mail Configuration

    hi friends we have the requirement for mail configuration of delivery document. SCENARIO Once PGI has been done , system send the mail to the customer and our logistics department Mail id. i have maintain the mail id in the customer master, but  wher

  • How to retrieve configuration list for WebDynpro component

    Hi experts, I have webdynpro component A with configuration AA. How to retrieve configurtion AA ? Is there any interface or Function module I can use? Also another question is how to get webdynpro configuration of WebDynpro application. Thanks. best

  • Windows Update error 80070490

    While trying to search manually for updates our Windows 2008 server gives the following error : "Windows could not search for new updates" CODE: 80070490. We have SCCM in place but this is not working with the same error, so I believe there is someth

  • Can't access webacc on server public ip address

    This is new server with a fresh SLES11sp2 OES11sp1 install with GW2012 sp2. All is working well except even a local workstation cannot access webacc using the server public ip. Server is behind a router. Makes no difference if firewalls are on or off