OSX 10.6.8 which version of git do I install?

I have no idea which of the following I am supposed to download to install git:
http://code.google.com/p/git-osx-installer/downloads/list?can=3
????!!!!!   !@#$@#$!@#$#!@#
Hardware Overview:
  Model Name:          MacBook
  Model Identifier:          MacBook2,1
  Processor Name:          Intel Core 2 Duo
  Processor Speed:          2.16 GHz
  Number Of Processors:          1
  Total Number Of Cores:          2
  L2 Cache:          4 MB
  Memory:          2 GB
  Bus Speed:          667 MHz
  Boot ROM Version:          MB21.00A5.B07
  SMC Version (system):          1.17f0
  Serial Number (system):          W87xxxx3YA8
  Hardware UUID:          00000000-0000-1000-8000-001B631EC639
  Sudden Motion Sensor:
  State:          Enabled
< Edited By Host >

The answer to that question depends as much on your goals and expectations than on your system type.
As for an option that's received wide note of late, the GitX GUI-version of git.  That might be easier for you.
From that list you've linked, your choice is 32-bit or 64-bit (your Core 2 Duo is 64-bit) and your software version; whether you are running 10.5 Leopard, 10.6 Snow Leopard or 10.7 Lion on that MacBook.  I'd expect you can run the recent 64-bit Snow Leopard variant.  (I'm somewhat surprised there's such a warren of git installers posted, but that complexity and how that might be reduced is another discussion.) 
As for some of the notation in that list, i386 is an Intel binary, and (in this context) 32-bit, and x86-64 is also Intel, and 64-bit.  The rest of that string is the git version, and the target Mac OS X version.

Similar Messages

  • How to tell which version of Adobe Reader is installed on iPhone

    I can I figure out which version of Adobe Reader is installed on an iPhone?

    Hi,
    To check the version of Adobe Reader on your iPhone/iPad
    Go to your iOS home screen.
    Tap Settings.
    Scroll down to the bottom to find Adobe Reader or Adobe Acrobat.
    Check the version number.
    Hope this helps.

  • How do I determine which version of windows os is installed on the computer that my application is running on.

    I need to determine which version of windows os in on the computer running my application to make some minor adjustments to a subvi.  Is there a programmatic way to determine this using Labview.

    Or, use the Application property node Application>OS>Detailed Name.  Although I can't say anything about its output on other-than-Windows OSes.
    By the way, I think you win the "reviving old thread" award today
    Dave
    David Boyd
    Sr. Test Engineer
    Philips Respironics
    Certified LabVIEW Developer

  • Which version of SQL server should install for persistent chat?

    hi
    after i got error that i put picture below 
    i decided to install sql server again for service persistent chat
    but i don't know which version should i download? and again i don't know how i should delete last sql server?
    which one i should download?
    1-2008 Express
    2-2008 R2 enterprise 
    3-2008 R2 SP2 - Express Edition

    As per the above error you are trying to install 2008 sql server which is not supported.
    you have to install SQL Server 2008R2 or 2012. Check this link
    http://technet.microsoft.com/en-us/library/gg398495.aspx
    Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

  • P750 p/n: PSAY3U-0RF​03H w7hp sp1 64bit, which version of the ISO to install

    I see that , Microsoft is offering two versions of the ISO file for windows 10 TP, x64 and x86. Which should I be installing?
    my machine is I7 2nd gen, 8GB of ram.
    in Windows Explorer, I have a folder named "Programs Files x86"
    Solved!
    Go to Solution.

    You should install the X64 version since you have currently a 64 bit OS. Program Files (X86) are 32 bit programs.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Which version can I download and install to get video download facility in the toolbar

    I find that version 3.6 has video download toolbar to facilitate download videos from any source, but it doesn't work properly and is very slow. Is there any version which provide a toolbar for efficient and fast downloading of videos with automatic prompt feature?

    Simply download the trial and activate it with the serial. Or you could copy the files to an USB stick on another computer. There is no super-secret extra download.
    Mylenium

  • Best way for a vbs logon script to check which version of Firefox is currently installed

    I am currently writing a vbs startup script for our Windows PCs. In the script I wish to detect if Firefox is currently installed on the PC and if so what version is installed, so that I can then run the Firefox installer only if the installed version is out of date.
    The main target for this is Windows 7 64-bit, although if it worked for XP that would be a bonus. The script will run as a PC startup script so will execute before a user has logged on.
    Ideally I would like to avoid assumptions about the current installation location as we have a number of PCs configured for specialist roles where Firefox won't be in C:\Program Files(x86)\Firefox.
    I believe that the information I need can be found in the registry, however the information I have been able to find has generally been conflicting and relating to very old versions of Firefox. Any information you can provide about this for Firefox 5/6 would be very much appreciated.

    You can download Firefox 3.6.x from the link below
    * [http://www.mozilla.org/firefox/all-older.html www.mozilla.org/firefox/all-older.html]
    In TenFourFox, plug-ins are disabled for security reasons, because plug-ins for PPC are outdated and full of vulnerabilities. More information can be found on
    * [http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported the TenFourFox wiki page].

  • Which version of CS5 Suite is installed on the puter?

    Sorry...strange question ....but where  does one
    get an indication of what version of CS5 Production Suite is installed?
    eg Premium or otherwise?
    Is it in the About or the Splash Screen..or  where?

    At the risk of stating the obvious, there is only one 'Production' version called Production Premium.    The only difference between the Master and Production Premium is the number of programs that you get, so I took the liberty of copying the specs from the sales page:
    (whichever matches the programs you have, that's the version you have installed)
    CREATIVE SUITE 5PRODUCTION PREMIUM
    Adobe Premiere Pro CS5
    After Effects CS5
    Photoshop CS5 Extended
    Illustrator CS5
    Flash Catalyst CS5
    Flash Professional CS5
    Soundbooth CS5
    Adobe OnLocation CS5
    Encore CS5
    Bridge CS5
    Device Central CS5
    Dynamic Link
    Integrates with CS Live online services*
    CREATIVE SUITE 5MASTER COLLECTION
    Photoshop CS5 Extended
    Illustrator CS5
    InDesign CS5
    Acrobat 9 Pro
    Flash Catalyst CS5
    Flash Professional CS5
    Flash Builder 4 Standard
    Dreamweaver CS5
    Fireworks CS5
    Contribute CS5
    Adobe Premiere Pro CS5
    After Effects CS5
    Soundbooth CS5
    Adobe OnLocation CS5
    Encore CS5
    Bridge CS5
    Device Central CS5
    Dynamic Link
    Integrates with CS Live online

  • Which version to get?

    I had have an old Black Macbook I bought about three to four years ago. I bought it before Leopard came out so it only has MAC OSX I think. Which version of snow leopard do I have to buy since I don't have Leopard?

    [Here is a thread describing a successful upgrade install from Tiger to Sno.|http://discussions.apple.com/thread.jspa?threadID=2185421&tstart=125] Here are my thoughts about moving from Tiger to Sno.
    In your place, I would move to SL only if I had an external drive with a bootable clone of my internal on it. I think that there is enough risk in going to SL that such conservatism is warranted. I would not use time machine for an installation backup; I don't trust it enough. If you do not like SL, then you can restore your internal using the clone. The clone is your fail-safe mechanism. You can do your cloning with Disk Utility, but it you want to update your clone frequently, then I’d use SuperDuper or Carbon Copy Cloner.
    I would use an upgrade install to move to Sno. Upgrading is a very sound process on a Mac, especially when upgrading to Sno. An upgrade is performed by installing over your existing installation from the desktop or having started from your SL DVD. All your programs, data, users, and settings will be present after an upgrade, but incompatible programs will be archived. It is important for you to be sure that the installation you are upgrading is in good condition by doing any needed routine maintenance and trouble shooting. Go [a|http://www.thexlab.com/faqs/maintainingmacosx.html] and [b|http://www.macattorney.com/ts.html#Anchor-43779]. Also, you may want to anticipate any incompatibilities by using these links: [1|http://snowleopard.wikidot.com>, [2|http://support.apple.com/kb/HT3258], and [3|http://www.macintouch.com/specialreports/snowleopard/slcompat.html].
    At the start of you installation, you probably will want to install two of the optional install items (see first page installation screen). I think you will want to install Rosetta and QT7.
    Leave your internet connection in place, if you have one, when installing, but unplug all peripherals except as mentioned above.

  • How to find out which version of OID, SSO, Portal, and Disco. to install?

    Hi,
    I just upgraded from 11.5.9 (DB 9.2.0.4) to 12.1.1 (DB 10.2.0.5) using Rapid Install Wizard.
    The 11i system did have Portal and Single Sign-On, and Discoverer 4i. How can I find out which version of these I can install and integrate with the new system? Do I need to install a separate Application Server?
    Thanks,
    Sinan

    Please see these docs.
    Integrating Oracle E-Business Suite Release 12 with Oracle Internet Directory and Oracle Single Sign-On [ID 376811.1]
    Oracle Application Server with Oracle E-Business Suite Release 12 FAQ [ID 415007.1]
    Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12 [ID 373634.1]
    Using Discoverer 11.1.1 with Oracle E-Business Suite Release 12 [ID 1074326.1]
    How To Enable Single Sign On (SSO) For Discoverer 11g (11.1.1.x) [ID 879604.1]
    Thanks,
    Hussein

  • I installed MAC LION OS X , which version of xcode is supported. i tried for it more than 3 days

    Hi All,
    I am new to MAC, i installed MAC os in windows 7 through the VM Ware, i tried to install xcode 4.1 and many version of xcode, after i download the .dmg file when i open it "xcode icon" is blocked, when double click it, says Update the version.
    If i try to update after 2 hours and 99% updation, i get a message updation failed.
    Please let me know which version of xcode can be installed in mac os x lion 10.7  or how do i update my mac os without any error.
    Thanks for the help
    Regards
    Ram

    Hi mende1,
    I downloaded the xcode from window7 , and transfer the file from window7 to mac. And there i try to install i get the error which i said above.
    Today i tried to install directly from the apple store, it say update "Mac Os to be updated 10.7.4"   I am using 10.7
    When i click update my OS after 2 hrs, i get message "Updation Failed"  so how to update ?
    Thanks for your prompt reply.

  • Which version of Java for SAP NetWeaver 7.02 in Windows Server 2008

    Hi ,
         I want to install SAP NetWeaver 7.02 (not SP6) in Windows Server 2008 R2 x64, but I don't know which version of Java I should install first, I have downloaded the following four types of Java:
    j2eesdk-1_4_02_2005Q1
    j2sdk-1_4_2_09_windows_i586
    j2re-1_4_2_19-windows-i586-p
    j2sdk-1_4_2_19-windows-i586-p
        But, I don't know which type I should choose to install first.
        Thanks for help!

    Hi Cathal,
        Thanks for your help!
        But the document of SAP installation says:
    If you start sapinst the first time, you will be logged off your operating system and afterwards prompted for the installation directory of JRE 1.4.latest or 1.5.0_22 (tested).
    Do not use 1.6.x! The installation will start, but not finish.
    JRE 1.4.latest or 1.5.0_22 (tested): it means I should install j2re-1_4_2_19-windows-i586-p, is it right?

  • How To Know Which Version of Firmware / software i...

    Hi, I just bought my E71. How do I know which version of firmware is installed on my phone, and which version of the Realplayer is installed ? Thanks.

    type *#0000# to check the firmware on the home screen
    and to check real player's version go to 'About Player' in the options of real player
    Message Edited by fdilbar on 07-Dec-2008 06:27 PM
    Best Regards,
    Faisal Mohammad

  • Any recommendations on which version of Photoshop to purchase for Ver. 10.9 and do you need a CD drive to install it or can it all be downloaded?

    Which version of Photoshop can I install on a Version 10.9 iMac and do I need a CD Drive to install it even if I download Photoshop from the Adobe site?

    The one called Pixelmator in the Mac App Store.

  • How to identify which version of Flash Player?

    I'm using MacBook Pro OS 10.6.5.  When I go to "Get Info" to see which version of Flash Player is installed, I can't see any version listed.  I can only see date modified (28 July 2010), copyright dates, file size etc.  So I don't know whether I need to upgrade to Flash Player 10.1 or whether I'm already running that version.  Any help please?

    Hi, this is the site for older versions: http://kb2.adobe.com/cps/142/tn_14266.html
    I would suggest if you can to Download and SAVE the Installer version to your Desktop.
    Be sure to use the Uninstaller to remove the 10.1 first. You can download it and SAVE it to your Desktop.
    I'd review the Uninstall instructions to make sure you have a clean Uninstall.
    http://kb2.adobe.com/cps/141/tn_14157.html
    After you have those on your Desktop and following the instructions for Uninstall, then Close all browsers. Uninstall, then reboot and follow that with the Install and then reboot.
    eidnolb

Maybe you are looking for

  • SpaceDesigner using only 2 processors at a time???

    Hi, I was running some benchmark tests using the Benchmark Song using the Space Designer. When I fired it up I was surprised to see that only 2 processors of the 4 cores were being used, and they're not always from one processor, so I could get core

  • How to send message to all users?

    Friends, Server os:RHEL AS 3 client os: Windows XP SP2 DB: 9iR2 I would like to send a message to the users regarding the shutting down of the database. for example. we have six users in our test environment and they are using sql*plus. the users sho

  • How to Include a KF which dispay serial no of the records

    Hi, I had 52 rows in my report (each represent week (restriction) My requirment i need to include a formula in Columns which will be like a serial no....1...52 Basically it should display 1 for row1,2 for row2....35 for row 35 and 52 for row 52 How c

  • How to define new Navigation Link in IC wed

    Hi, while creating the navigation bar id, we have to give atleast one of the following inputs 1 Navigation Link or 2.Class Name or 3.Launch Transaction ID I know how to create launch transaction id,but i found that the out put of the trasaction is in

  • No fund derived for stadistical commitment item: error F6804

    Hello, While posting a payment I face an exchange difference. The exchance difference account has an "stadistical commitment item" related in the GL master data. While posting and following the fmderiver tracking I see that the account tries to get t