OSX 10.6 Will Not Startup - Help Please!

OK. I am running Snow Leopard (latest version) which was all working wonderfully until I installed a T-mobile dongle. Since restarting the system after installing the dongle the OS will not start. It gets to the screen where the Apple logo appears and the spinning cog but remains in that state permanant.
So far I have tried the following:
Reset RAM
Tried to start in safe mode
Started with install disc and used diskutility to check disk. All was fine
Fixed permissions
Now I know this problem is something to with the software the T-mobile dongle has installed. Is there any way of removing without loading the OS via termianl or something (I would need detailed instructions).
Or is there anything else I can try failing archive and reinstall which is my very last resort.
Thanks everybody.
Stefan

Hi Stefan2908;
You might be able to remove the T-Mobile crap if you have access to another Mac and boot your Mac in Target Disk Mode with the two Mac connected via Firewire. That should give you access to the disk in your Mac from the other Mac.
Allan

Similar Messages

  • HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

  • I have purchased VGA adaptor & HDMI adaptor to connect ipAd1 to a TV - it will not.  Help please

    I have purchased VGA adaptor & HDMI adaptor to connect ipAd1 to a TV - it will not.  Help please

    Only certain apps that had this feature added will show from an original iPad to a video out - whether VGA or HDMI. It does not have true mirroring, like the iPad2 does.

  • Laptop will not startup.. please help!!

    I have a L505D-S5983 w/ Windows 7 that will not start up. when i turn the power on everything looks good, the Toshiba screen pops up like always, then this black "Windows Error Recovery" screen pops up and gives me 2 options 1) Launch Startup Repair and 2) Start Windows Normally. ive dealt with this issue many times on many computers and either option always gets the computer running, but with this machine whenever i press "Start Windows Normally", the screen with the little wavey Windows flag pops like its loading up for about 15 seconds then the computer automatically restarts to the Toshiba screen. when i click the "Launch Startup Repair" option it shows a small progress bar at the bottom of the screen for about 5 seconds then goes to a completely blank black screen with only the arrow pointer showing and just stays there. ive let it sit for over an hour like that and nothing changes. i did a memory diagnostic check which did nothing. im a novice w comps so i dont know what to do. i lost my backup recovery CD so that wont help. could i download one somewhere? would that fix my problem? im so frustrated.. ive had nothing but problems with this laptop since the day i bought it. but i need it running asap. i greatly appreciate any help!!!

    first, don't panic!  just kidding
    if you have not already made recovery discs then you will have to order them from toshiba.  that is, unless we are able to use the hidden partition to restore to out-of-box state.  Before that though, you should try a few things as going to out-of-box is going to compeltely wipe everything off of your computer. 
    turn off computer, then when you turn on, spam (hit once ever second) the f8 key and see if you can get into emergeny boot options menu.  If it doesn't go in first try, try at least 4-5 more times as it's all about timing the f8 key.  if successful, try to boot into safe mode.  if you have made it that far, post back. 
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • I have connected a company iPhone to iTunes and it will not sync, help please!

    My company have several iPhones which are setup through the same iTunes account but when you connect them to the pc it will not sync. I need to update them and load the latest software as they are still running on very old software. Help would be much appreciated!

    Is this the computer to which they normally sync?  If not... save yourself some hassle.
    iDevices are designed to sync to only one computer/library.  Attempts to sync to another computer/library will wipe all content.  Upgrading the device requires a backup prior to the update which will remove all content if this is not the computer they normally sync with.

  • Error when starting iTunes... will not start. help please!!

    so earlier I downloaded the latest version of iTunes and was having trouble installing it. I downloaded it a while ago when it was version 4 but I completely deleted it and installed version 7.
    eventually I got it to work, however when I went to start it I got an error saying that it encountered a problem and needs to close. then another one comes up saying that it generated problems and I need to restart the program. I did, and the same thing happened.
    I uninstalled and reinstalled the entire thing 3 times; same error. I called Apple Support and they said they couldn't help me b/c I am operating in Windows XP, and Microsoft's support is closed right now. I tried repairing it and nothing works. can anyone help please??

    hmmmm. okay, if your itunes.exe is running continually in Task Manager, that suggests that you don't have the Qoologic problem that Ewido fixes. (with that one, the itunes.exe typically just shows up for a few seconds, if at all ... although in some cases of multiple malware infections, it hangs around for 10 to 30 seconds.)
    so let's check on the usual suspects when itunes.exe persists in Task Manager.
    if you've got Norton Internet Security 2005, try the trusty Lorraine M technique:
    Lorraine M: NIS/itunes problem rectified
    ... but if you don't have NIS 2005, or it doesn't seem to work for you, let's also check up on this possibility:
    iTunes for Windows doesn't open after upgrading

  • Elements window will not maximize, help please

    For some reason my photoshop elements window will not maximize.  The editor workspace will just fine, but not the organizer.  I am using elements 6 and Vista.  Anyone else seen this happen?  I can see it on my task pane and it previews the screen for me, but when I click it, nothing happens.

    Two monitors, OS X 10.10.2, MacBook Pro (Retina, 13-inch, Mid 2014), 3GHz Intel Core i7, 16GB Memory

  • 10.7.2 will NOT install help please

    iMac 27 (2.8 / 4gb) and my mbp (2.8 / 4gb)
    Neither of then will take the 10.7.2 update. Both machines reported the corrupted update (not expandable or corrupted during download error) after The lion recovery update downloads / installs, the OS update completely downloads and reboots. On reboot the machines both error out 30 seconds into the install.
    There is a thread on here that states others have had the same issue and worked through it using a combination of the repairing their disk permissions and immediately installing the update from the downloaded combo update DMG and NOT using software update. 
    When I download and launch the update combo update dmg or the client update (non combo?) dmg ALL of the dmg's also error out on INVALID checksum ... On two completely separate machines, I get invalid checksums from dmg's from the apple site? someone please explain.  Even if I skip the verification the installer looks normal until it starts to install and then also errors out.
    The reports that have been successful at getting the update to install all report that repairing the permissions are the cure... - when I repair disk permissions, I get a load of system/library/coreservices/remotemanagment/ardagent.app....... Junk that should be.... And i get the same list on both machines. The permmisions repair lists them as repaired.
    .... Then if I DO nothing, other than simply press "repair disk permissions" again, it lists all the same mess of mismatched perms....
    Please help?

    thank you for your reply putnik- i'm sorry my explanation was confusing. i'll try to clarify my explanation and shelve the frustrations.
    I am currently sitting at 10.7.1.  When I ORIGINALLY started this adventure, I did my usual update through Software Update and there were two items listed:
    "Lion Recovery Update"
    "Mac OS X 10.7.2"
    I simply allowed all to proceed as normal.  When the machine rebooted to install the OS update- it verifies the installer for about 30 seconds and then I get -
    "The update "Mac OS X Update" can't be installed. The update could not be expanded and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."
    And this is where I cannot get past. No mater what procedure I do- I cannot get the download to install on either of my machines.  https://discussions.apple.com/message/16378707#16378707
    is an earlier thread that I has been experiencing the same issues, and this is where I got the info regarding the disk permision repairs- and trying to install from the downloaded image and not through Software Update.
    This makes no sense to me.  I have downloaded the update dmg from apple at least 10 times on two different machines, and on every one- their checksum is invalid? Even when I check the checksum with disk utility it reports an error?
    Only other thing of note is that my iPads will also not update through itunes and also report that the download was corrupted or damaged during download?
    I'm stuck.  I hope that this explanation is clear?

  • Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

    I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

    Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
    Format the partition as NTFS.

  • Garageband will not install, Help, Please!

    Where does the App store download files to?
    I am having loads of problems with App store on my iMac running 10.6.7, my MacBook is fine and working as it should, but my iMac is a total disaster. It started with Update buttons appearing on the Purchases tab, which you cannot update because of the "log into the account" error and I tried all the methods outlined on the forum, none of which worked. I ended up trashing the offending apps and re-installing them. My only problem now is Garageband. It has gone. Every time I open the App store it asks me to install it, which I do, waiting 5 minutes sometimes whilst it downloads. Then nothing, it just won't install. Is there any files I should delete from the old install? It has me stumped. Any ideas?

    Try a Spotlight search for Garageband. If it appears under Applications double click on it to start it, close the intro page, then on the top menu click on Garageband and then About and see what version it is.
    The download you get when you are notified of a software update is a delta update as it only includes what is needed to move you from 10.6.6 to 10.6.7. The combo update contains all of the updates since the start, hence it can move you from 10.6.0 to 10.6.7, or anything in between. It is also why it is much larger than a delta update file. To my knowledge it does not contain any new updates for Garageband or anything else. It is always a good thing to try if you have problems after an OS update and some people will only manually install the combo update.
    You might also want to try booting from your OS X disk and repairing permissions on your disk (there are also many different opinions on this, but it won't hurt anything).
    Let us know how you get on.

  • Itunes will not load - help please!

    Hello,
    I've seen a lot of helpful responses on this forum so I'm trying my luck!
    Yesterday my itunes worked fine, today I try to open it and I get the little egg timer symbol next the the mouse (I run XP) and the computer sounds like it's doing stuff but Itunes never appears.
    I can see itunes.exe and itunes helper in the processes when ctrl-alt-del.
    So far I have tried reinstalling itunes, deleting and reinstalling quicktime, deleting some file or other as directed by the online help and also scanning using ewido but none of this has helped.
    Any ideas??
    Thanks!
    Alex

    hmmmm. okay, if your itunes.exe is running continually in Task Manager, that suggests that you don't have the Qoologic problem that Ewido fixes. (with that one, the itunes.exe typically just shows up for a few seconds, if at all ... although in some cases of multiple malware infections, it hangs around for 10 to 30 seconds.)
    so let's check on the usual suspects when itunes.exe persists in Task Manager.
    if you've got Norton Internet Security 2005, try the trusty Lorraine M technique:
    Lorraine M: NIS/itunes problem rectified
    ... but if you don't have NIS 2005, or it doesn't seem to work for you, let's also check up on this possibility:
    iTunes for Windows doesn't open after upgrading

  • So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

    So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

    You can force quit by holding the power button down for extended period.
    During boot up hold down the Option key and choose your Macintosh HD OSX.
    In >System Preferences> Startup Disk>choose your internal OSX System as Default.

  • I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
    you can download the itunes http://www.apple.com/itunes/ here
    then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
    you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

  • My purchased music will not play on any of my devices.  It is there but it will not play.  Please help.

    My purchased music will not play on any of my devices.  It is there but it will not play.  Please help.

    Try deleting and redownloading the music.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I need to create a second back-up of iPhoto from Time Machine to a separate external drive.  The old iPhoto in TM will not open.  Please help!

    I need to create a second back-up of iPhoto from Time Machine to a separate external drive.  The old iPhoto in TM will not open.  Please help!  And thank you!

    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Maybe you are looking for

  • A photo has been found in the iphoto library that has not been imported???

    When i open iphoto i get a message saying "a photo has been found in the iphoto library that has not been imported, would you like to import it?" I have tried what everyone is saying to do, but when i look under show package contents there is no impo

  • Need help in Understanding synchronization through code

    I read someone that synchronization is suppose to allow only one thread to access a synchronized method or block of code. But then I wrote some code just to test it out. import java.util.ArrayList; import java.util.Vector; public class Testing extend

  • How do I copy iPhoto 7.1 Library from Intel to PPC Mac and back

    Hello all I apologize for the long first post; but I've been lurking for a while and haven't seen a similar problem. Any assistance would be greatly appreciated. I have two Macs - a PowerBook G4 and an Intel Mini. I copied the 6.x Library from the PB

  • Adding and configuring a second hard drive in a Power Mac G4

    I am using a Power Mac G4 with the original 20GB hard drive and running OS 9.2.2. I would like to upgrade to 10.4 (Tiger) installing it on a 80 GB Seagate Ultra/ATA 100 which I need to install as a second hard drive. This is where my problem arises.

  • EDI VS  BDC

    what is edi and how it can differ from bdc.....?