OSX 10.7 sporadic freezes (because of Epson driver?)

MBP 17", SSD 256, OS X 10.7.1, Epson driver version 5.2
The display often freezes wenn using the epson printer AL-C1900 (Network-Printer) in different appliances for printing (the print-job done by the printer is ok). Nothing is working after this event, even the appliance-managing-task (cmd+alt+esc) doesn't work. Only the emergency-stop by pressing the on/off-butten for a while and restarting the machine helps. But sometimes, in the same situation, the printing process workes very well.
The installed Epson driver is the latest version from apple recommended.

Have you tried checking with Epson to see if they have a newer driver yet?  Sounds like you need an updated printer driver, and Epson is the only one who can provide that.  Unfortunately, "wait until Epson releases an update and don't print until then" is not much of a solution, but the only other one is to downgrade to an older system that their driver will work with, and that's a lot of work and inconvenience.
BTW, note that every time you force restart your machine, you may be damaging data on the hard drive.  You need to repair it, or at least verify it, with Disk Utility every time that happens.  Hold down command-R while starting up to enter Lion's recovery mode, then use Disk Utility from there to repair the hard drive.

Similar Messages

  • Worried upgrading OSX Mountain Lion 10.8 because of...

    Hi to All!
    I'm already a MBP user for 1 year and since then I didn't upgrade my OSX. I'am worried because the time I bought my MBP one of my friend upgrade the OSX to 10.8 by using his usb thumb drive I didn't have the chance to asked hm if that is pirated or good because of excitement , I want to ask him these days but unfortunately he is unable to contact.
    So my question is... is it safe to update my OSX 10.8 to 10.8.4 (latest version) thru App Store by clicking the update button? because I am just thinking if my friend update my OSX using pirated or not good stuff I'am worried that Apple might block my MBP or something and if that so I might stay on this version for good, I would like to buy the 10.8 before if I it is required in order to stay legal.
    Please help!
    Advance Thanks!

    Yes, it's safe. Do this:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Download and install 10.8.4 Mountain Lion Update v10.8.4 (Combo).

  • My Mac OSX is coming up with error message when i try to write a disc "The disc can't be burned because the disc drive is not accessible (error code 0x80020020)." Same also when I tried my external disc writer-any clues?

    My Mac OSX (version 10.7.5) is coming up with error message when I try to write a disc "The disc can’t be burned because the disc drive is not accessible (error code 0x80020020)." I have tried several discs with the same message - Same also when I tried my external disc writer. Both disc drives will read my discs that have music or photos on it, it just won't write any new discs - any clues?

    Hi Klaus1
    So, I tried all the suggestions and followed the links - all to no avail.
    as you can see, (screenshot below) my iMac is a 21.5 inch late 2009 model which isn't showing in the updates listed above
    My system report shows that my Mac has the following:
    I reset the PRAM and the SMC - still have the same error message when I try to burn discs. I've used both CD's and DVD's and tried with my external Discwriter too.
    Any further suggestions??

  • My iPad3 is freezed because the iCloud notification stays on the screen even after I touched the OK button.

    My iPad3 is freezed because the iCloud notification stays on the screen even after I touched the OK button.

    Hold Home and Sleep buttons and the iPad will restart

  • Downloading itunes causes computer to freeze because of high computer usage...how do i fix it?

    downloading itunes causes computer to freeze because of high computer usage...how do i fix it?

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Forcing Epson driver to update to 3.5 (Universal Binary)

    I was having problems with an Epson Stylus Pro 7800. When printing from Photoshop CS3, all of the custom printer options such as "Print Settings" and "Paper Configuration" were unavailable (they were there, but crossed out with a strikethrough). If I selected one of them, I was told that the Epson PrintSetting version 2.7 wasn't compatible. Presumably because I was on an Intel iMac and the drivers weren't Universal. A FAQ on Epson's site confirmed this. Non-Universal programs could still use the custom options.
    So I downloaded and installed the latest drivers (3.5). The installation went fine, but the problem never went away. I looked in the System Profiler, and the drivers were still listed as 2.75.
    I looked through the Library folder and found the drivers. Sure enough, the old driver (2.7) was still in:
    /Library/Printers/EPSON/SPro7800.plugin
    I found the new driver (3.5), split into two parts here:
    /Library/Printers/EPSON/InkjetPrinters/SPro7800.plugin
    /Library/Printers/EPSON/InkjetPrinters/PrintingModule/SPro7800_Core.plugin
    If you view the package contents, you'll see that the two new drivers together hold all the contents that were in the original one, so I made a new SPro7800.plugin that contained the combined contents. Especially important for this problem is the "PDEs" folder. To reflect the new location of these PDEs, I had to edit the PDEs.xml file found in the Resources directory.
    Finally, I took out the old driver and replaced it with the new one I made. Upon restarting, System Profiler recognized the new version and Universal apps could now access the custom print options.
    So anyway, that was kind of a pain, but I figured I'd post it here in case someone else has the same problem. But really, Epson needs to fix their updater.

    An easier approach:
    1. Delete the Epson folder and all of its contents. (All of the existing ones will be for non Intel Macs.)
    2. Restart the computer
    3. Install the OSX Intel Epson driver of your choice.

  • Screen flickering and system freezes when using Nouveau driver.

    I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
    I can't use the computer in that state so I force a shutdown.
    I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.
    dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.3 present.
    [ 0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM , BIOS R01-B4 06/15/2007
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
    [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
    [ 0.000000] [mem 0x00000000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x373fffff] page 2M
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
    [ 0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
    [ 0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
    [ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
    [ 0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 57ff0000 00040
    [ 0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
    [ 0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 519MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x57feffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x57feffff]
    [ 0.000000] On node 0 totalpages: 360319
    [ 0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 1040 pages used for memmap
    [ 0.000000] HighMem zone: 132066 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] ACPI: IRQ14 used by override.
    [ 0.000000] ACPI: IRQ15 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
    [ 0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357503
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2883328 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
    [ 0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc15ba000 - 0xc1646000 ( 560 kB)
    .data : 0xc141613e - 0xc15b9d80 (1679 kB)
    .text : 0xc1000000 - 0xc141613e (4184 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1908.551 MHz processor
    [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003404] Security Framework initialized
    [ 0.003415] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003432] Mount-cache hash table entries: 512
    [ 0.006819] Initializing cgroup subsys cpuacct
    [ 0.006822] Initializing cgroup subsys memory
    [ 0.006834] Initializing cgroup subsys devices
    [ 0.006837] Initializing cgroup subsys freezer
    [ 0.006840] Initializing cgroup subsys net_cls
    [ 0.006842] Initializing cgroup subsys blkio
    [ 0.006879] CPU: Physical Processor ID: 0
    [ 0.006882] CPU: Processor Core ID: 0
    [ 0.006885] mce: CPU supports 5 MCE banks
    [ 0.006896] LVT offset 0 assigned for vector 0xf9
    [ 0.006902] process: using AMD E400 aware idle routine
    [ 0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
    tlb_flushall_shift: 4
    [ 0.007021] Freeing SMP alternatives: 16k freed
    [ 0.007977] ACPI: Core revision 20121018
    [ 0.015366] ftrace: allocating 18273 entries in 36 pages
    [ 0.023490] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
    [ 0.059999] Performance Events: AMD PMU driver.
    [ 0.059999] ... version: 0
    [ 0.059999] ... bit width: 48
    [ 0.059999] ... generic registers: 4
    [ 0.059999] ... value mask: 0000ffffffffffff
    [ 0.059999] ... max period: 00007fffffffffff
    [ 0.059999] ... fixed-purpose events: 0
    [ 0.059999] ... event mask: 000000000000000f
    [ 0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
    [ 0.083412] smpboot: Booting Node 0, Processors #1 OK
    [ 0.006666] Initializing CPU#1
    [ 0.176732] Brought up 2 CPUs
    [ 0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
    [ 0.177423] devtmpfs: initialized
    [ 0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
    [ 0.178162] RTC time: 21:06:38, date: 03/21/13
    [ 0.178225] NET: Registered protocol family 16
    [ 0.178397] node 0 link 0: io port [8000, ffff]
    [ 0.178401] TOM: 0000000060000000 aka 1536M
    [ 0.178404] node 0 link 0: mmio [a0000, bffff]
    [ 0.178408] node 0 link 0: mmio [60000000, efffffff]
    [ 0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
    [ 0.178414] node 0 link 0: mmio [f0000000, f03fffff]
    [ 0.178418] bus: [bus 00-04] on node 0 link 0
    [ 0.178421] bus: 00 [io 0x0000-0xffff]
    [ 0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
    [ 0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
    [ 0.178495] ACPI: bus type pci registered
    [ 0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.178581] PCI: Using MMCONFIG for extended config space
    [ 0.178583] PCI: Using configuration type 1 for base access
    [ 0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.178679] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.178681] mtrr: corrected configuration.
    [ 0.180670] bio: create slab <bio-0> at 0
    [ 0.180670] ACPI: Added _OSI(Module Device)
    [ 0.180670] ACPI: Added _OSI(Processor Device)
    [ 0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.180670] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.181260] ACPI: EC: Look up EC in DSDT
    [ 0.186070] ACPI: Interpreter enabled
    [ 0.186077] ACPI: (supports S0 S3 S4 S5)
    [ 0.186098] ACPI: Using IOAPIC for interrupt routing
    [ 0.193127] ACPI: No dock devices found.
    [ 0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
    [ 0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.195031] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
    [ 0.195034] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
    [ 0.195037] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
    [ 0.195040] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
    [ 0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
    [ 0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
    [ 0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
    [ 0.195057] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored)
    [ 0.195060] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
    [ 0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
    [ 0.195066] PCI: root bus 00: hardware-probed resources
    [ 0.195117] PCI host bridge to bus 0000:00
    [ 0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
    [ 0.195124] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
    [ 0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
    [ 0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
    [ 0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
    [ 0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
    [ 0.195397] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
    [ 0.195414] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
    [ 0.195421] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
    [ 0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
    [ 0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
    [ 0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
    [ 0.195564] pci 0000:00:02.0: supports D1 D2
    [ 0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
    [ 0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
    [ 0.195639] pci 0000:00:02.1: supports D1 D2
    [ 0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
    [ 0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
    [ 0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
    [ 0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
    [ 0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
    [ 0.195814] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
    [ 0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
    [ 0.195860] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
    [ 0.195866] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
    [ 0.195872] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
    [ 0.195877] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
    [ 0.195883] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f]
    [ 0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
    [ 0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
    [ 0.195932] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
    [ 0.195938] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
    [ 0.195944] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
    [ 0.195949] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
    [ 0.195955] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f]
    [ 0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
    [ 0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
    [ 0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
    [ 0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
    [ 0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
    [ 0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
    [ 0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
    [ 0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    [ 0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    [ 0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    [ 0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    [ 0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
    [ 0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
    [ 0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
    [ 0.196412] pci 0000:01:09.0: supports D1 D2
    [ 0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
    [ 0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
    [ 0.196448] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
    [ 0.196452] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.196456] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
    [ 0.196459] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.196462] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.196465] pci 0000:00:04.0: bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
    [ 0.196469] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
    [ 0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
    [ 0.196498] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
    [ 0.196501] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.196506] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
    [ 0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
    [ 0.196575] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff]
    [ 0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.196648] pci 0000:03:00.0: supports D1 D2
    [ 0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
    [ 0.203357] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
    [ 0.203361] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.203365] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
    [ 0.203394] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
    [ 0.203398] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.203402] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.203413] pci_bus 0000:00: on NUMA node 0
    [ 0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
    [ 0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
    [ 0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
    [ 0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
    [ 0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
    [ 0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
    [ 0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    [ 0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
    [ 0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    [ 0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
    [ 0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
    [ 0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
    [ 0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
    [ 0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
    [ 0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
    [ 0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
    [ 0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
    [ 0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    [ 0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
    [ 0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    [ 0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    [ 0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.245086] vgaarb: loaded
    [ 0.245086] vgaarb: bridge control possible 0000:00:0d.0
    [ 0.245086] PCI: Using ACPI for IRQ routing
    [ 0.246696] PCI: pci_cache_line_size set to 64 bytes
    [ 0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
    [ 0.246902] NetLabel: Initializing
    [ 0.246904] NetLabel: domain hash size = 128
    [ 0.246906] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.246923] NetLabel: unlabeled traffic allowed by default
    [ 0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
    [ 0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
    [ 0.256702] Switching to clocksource hpet
    [ 0.264319] pnp: PnP ACPI init
    [ 0.264346] ACPI: bus type pnp registered
    [ 0.264605] system 00:00: [io 0x1000-0x107f] has been reserved
    [ 0.264609] system 00:00: [io 0x1080-0x10ff] has been reserved
    [ 0.264613] system 00:00: [io 0x1400-0x147f] has been reserved
    [ 0.264616] system 00:00: [io 0x1480-0x14ff] has been reserved
    [ 0.264620] system 00:00: [io 0x1800-0x187f] has been reserved
    [ 0.264623] system 00:00: [io 0x1880-0x18ff] has been reserved
    [ 0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
    [ 0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
    [ 0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
    [ 0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.265431] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.265434] system 00:01: [io 0x0800-0x087f] has been reserved
    [ 0.265438] system 00:01: [io 0x0290-0x0297] has been reserved
    [ 0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.265458] pnp 00:02: [dma 4]
    [ 0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
    [ 0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
    [ 0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
    [ 0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
    [ 0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
    [ 0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
    [ 0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
    [ 0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
    [ 0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
    [ 0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.267589] pnp: PnP ACPI: found 14 devices
    [ 0.267590] ACPI: ACPI bus type pnp unregistered
    [ 0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
    [ 0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
    [ 0.305603] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
    [ 0.305608] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.305612] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
    [ 0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
    [ 0.305621] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
    [ 0.305625] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.305629] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
    [ 0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
    [ 0.305641] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
    [ 0.305645] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.305649] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
    [ 0.305657] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
    [ 0.305661] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.305665] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.305677] pci 0000:00:04.0: setting latency timer to 64
    [ 0.305686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
    [ 0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
    [ 0.305699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
    [ 0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
    [ 0.305709] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
    [ 0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
    [ 0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
    [ 0.305722] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
    [ 0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.305732] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
    [ 0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.305742] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
    [ 0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
    [ 0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.305804] NET: Registered protocol family 2
    [ 0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.306122] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.306184] TCP: reno registered
    [ 0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.306279] NET: Registered protocol family 1
    [ 0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [ 0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [ 0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370606] pci 0000:00:0d.0: Boot video device
    [ 0.370621] PCI: CLS 64 bytes, default 64
    [ 0.370687] Unpacking initramfs...
    [ 0.455995] Freeing initrd memory: 2900k freed
    [ 0.459106] apm: BIOS not found.
    [ 0.459448] audit: initializing netlink socket (disabled)
    [ 0.459468] type=2000 audit(1363899998.456:1): initialized
    [ 0.474029] bounce pool size: 64 pages
    [ 0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.476263] VFS: Disk quotas dquot_6.5.2
    [ 0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.476593] msgmni has been set to 1731
    [ 0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.477042] io scheduler noop registered
    [ 0.477044] io scheduler deadline registered
    [ 0.477053] io scheduler cfq registered (default)
    [ 0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
    [ 0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
    [ 0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
    [ 0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
    [ 0.477471] vesafb: scrolling: redraw
    [ 0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
    [ 0.484141] Console: switching to colour frame buffer device 80x30
    [ 0.490611] fb0: VESA VGA frame buffer device
    [ 0.490704] GHES: HEST is not enabled!
    [ 0.490719] isapnp: Scanning for PnP cards...
    [ 0.802592] isapnp: No Plug & Play device found
    [ 0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.845087] mousedev: PS/2 mouse device common for all mice
    [ 0.845182] rtc_cmos 00:04: RTC can wake from S4
    [ 0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 0.845435] cpuidle: using governor ladder
    [ 0.845437] cpuidle: using governor menu
    [ 0.845439] EFI Variables Facility v0.08 2004-May-17
    [ 0.845489] drop_monitor: Initializing network drop monitor service
    [ 0.845593] TCP: cubic registered
    [ 0.845736] NET: Registered protocol family 10
    [ 0.845940] NET: Registered protocol family 17
    [ 0.845958] Key type dns_resolver registered
    [ 0.846129] Using IPI No-Shortcut mode
    [ 0.846264] PM: Hibernation image not present or could not be loaded.
    [ 0.846279] registered taskstats version 1
    [ 0.846851] Magic number: 5:851:146
    [ 0.846912] acpi device:17: hash matches
    [ 0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
    [ 0.847246] Freeing unused kernel memory: 560k freed
    [ 0.847645] Write protecting the kernel text: 4188k
    [ 0.847679] Write protecting the kernel read-only data: 1284k
    [ 0.858078] systemd-udevd[45]: starting version 198
    [ 0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.904637] ACPI: bus type usb registered
    [ 0.904681] usbcore: registered new interface driver usbfs
    [ 0.904697] usbcore: registered new interface driver hub
    [ 0.904815] usbcore: registered new device driver usb
    [ 0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [ 0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [ 0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    [ 0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
    [ 0.910252] ehci-pci: EHCI PCI platform driver
    [ 0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [ 0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
    [ 0.912040] SCSI subsystem initialized
    [ 0.915768] ACPI: bus type scsi registered
    [ 0.918637] libata version 3.00 loaded.
    [ 0.962268] hub 1-0:1.0: USB hub found
    [ 0.962279] hub 1-0:1.0: 10 ports detected
    [ 0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
    [ 0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
    [ 0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
    [ 0.962559] ehci-pci 0000:00:02.1: debug port 1
    [ 0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
    [ 0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
    [ 0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
    [ 0.970261] hub 2-0:1.0: USB hub found
    [ 0.970268] hub 2-0:1.0: 10 ports detected
    [ 0.970681] pata_amd 0000:00:06.0: version 0.4.1
    [ 0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
    [ 0.971618] scsi0 : pata_amd
    [ 0.972200] scsi1 : pata_amd
    [ 0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 0.972517] sata_nv 0000:00:08.0: version 3.5
    [ 0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
    [ 0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
    [ 0.973161] scsi2 : sata_nv
    [ 0.973470] scsi3 : sata_nv
    [ 0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
    [ 0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
    [ 0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
    [ 0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
    [ 0.974209] scsi4 : sata_nv
    [ 0.974369] scsi5 : sata_nv
    [ 0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
    [ 0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
    [ 1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
    [ 1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
    [ 1.143604] ata1.00: configured for UDMA/66
    [ 1.149515] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H40N RA00 PQ: 0 ANSI: 5
    [ 1.149876] ata2: port disabled--ignoring
    [ 1.297028] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.297032] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.633688] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
    [ 1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
    [ 1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
    [ 1.936808] usbcore: registered new interface driver usbhid
    [ 1.936814] usbhid: USB HID core driver
    [ 2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
    [ 2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.120325] ata6.00: configured for UDMA/133
    [ 2.120524] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
    [ 2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
    [ 2.125119] sd 5:0:0:0: [sda] Write Protect is off
    [ 2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 2.146217] sda: sda1 sda2 sda3
    [ 2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
    [ 2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
    [ 2.407819] Initializing USB Mass Storage driver...
    [ 2.408184] scsi6 : usb-storage 1-8:1.0
    [ 2.408335] usbcore: registered new interface driver usb-storage
    [ 2.408337] USB Mass Storage support registered.
    [ 2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
    [ 3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.097800] systemd[1]: Set hostname to <acer-aspire>.
    [ 3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
    [ 3.353005] systemd[1]: Starting Remote File Systems.
    [ 3.353024] systemd[1]: Reached target Remote File Systems.
    [ 3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.353173] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.353274] systemd[1]: Starting Journal Socket.
    [ 3.353366] systemd[1]: Listening on Journal Socket.
    [ 3.354821] systemd[1]: Starting Apply Kernel Variables...
    [ 3.357143] systemd[1]: Mounting Huge Pages File System...
    [ 3.363518] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.370154] systemd[1]: Mounting Debug File System...
    [ 3.385832] systemd[1]: Starting Journal Service...
    [ 3.393610] systemd[1]: Started Journal Service.
    [ 3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.407359] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.407389] systemd[1]: Starting Encrypted Volumes.
    [ 3.407409] systemd[1]: Reached target Encrypted Volumes.
    [ 3.407431] systemd[1]: Starting Setup Virtual Console...
    [ 3.410492] systemd[1]: Starting udev Kernel Socket.
    [ 3.410553] systemd[1]: Listening on udev Kernel Socket.
    [ 3.410641] systemd[1]: Starting udev Control Socket.
    [ 3.410689] systemd[1]: Listening on udev Control Socket.
    [ 3.410760] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.417037] systemd[1]: Starting udev Kernel Device Manager...
    [ 3.418761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
    [ 3.436758] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
    [ 3.441505] systemd[1]: Started Load Kernel Modules.
    [ 3.441546] systemd[1]: Mounted FUSE Control File System.
    [ 3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.441693] systemd[1]: Mounting Configuration File System...
    [ 3.465751] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
    [ 3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 3.505747] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
    [ 3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [ 3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
    [ 3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
    [ 3.553856] systemd[1]: Mounting Temporary Directory...
    [ 3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
    [ 3.744908] systemd-udevd[126]: starting version 198
    [ 3.777101] systemd[1]: Started File System Check on Root Device.
    [ 3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 3.790819] systemd[1]: Started udev Kernel Device Manager.
    [ 3.800185] systemd[1]: Started Apply Kernel Variables.
    [ 4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
    [ 4.205364] systemd-journald[122]: Received SIGUSR1
    [ 5.423026] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.423033] ACPI: Thermal Zone [THRM] (40 C)
    [ 5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
    [ 5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 5.484570] ACPI: Power Button [PWRB]
    [ 5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 5.484697] ACPI: Power Button [PWRF]
    [ 5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
    [ 5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
    [ 5.547898] Linux agpgart interface v0.103
    [ 5.558914] ACPI: Fan [FAN] (on)
    [ 5.559089] [drm] Initialized drm 1.1.0 20060810
    [ 5.565468] microcode: AMD CPU family 0xf not supported
    [ 5.567533] microcode: AMD CPU family 0xf not supported
    [ 5.642735] wmi: Mapper loaded
    [ 5.645076] kvm: Nested Virtualization enabled
    [ 5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
    [ 5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
    [ 5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
    [ 5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
    [ 5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
    [ 5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
    [ 5.685594] Console: switching to colour dummy device 80x25
    [ 5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
    [ 5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
    [ 5.686707] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
    [ 5.686715] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
    [ 5.686722] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
    [ 5.687642] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
    [ 5.733281] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
    [ 5.733287] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
    [ 5.733560] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
    [ 5.733565] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.25.04
    [ 5.733746] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
    [ 5.733749] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
    [ 5.733752] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
    [ 5.761373] [TTM] Zone kernel: Available graphics memory: 443504 kiB
    [ 5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
    [ 5.761381] [TTM] Initializing pool allocator
    [ 5.761831] nouveau [ DRM] VRAM: 125 MiB
    [ 5.761838] nouveau [ DRM] GART: 512 MiB
    [ 5.761844] nouveau [ DRM] BIT BIOS found
    [ 5.761848] nouveau [ DRM] Bios version 05.61.32.25
    [ 5.761852] nouveau [ DRM] TMDS table version 1.1
    [ 5.761855] nouveau [ DRM] DCB version 3.0
    [ 5.761859] nouveau [ DRM] DCB outp 00: 01000310 00000023
    [ 5.761863] nouveau [ DRM] DCB outp 01: 00110204 98830003
    [ 5.761865] nouveau [ DRM] DCB conn 00: 0000
    [ 5.761869] nouveau [ DRM] DCB conn 01: 1131
    [ 5.761872] nouveau [ DRM] DCB conn 02: 0110
    [ 5.761875] nouveau [ DRM] DCB conn 03: 0111
    [ 5.761877] nouveau [ DRM] DCB conn 04: 0113
    [ 5.762420] nouveau W[ DRM] DCB type 4 not known
    [ 5.762425] nouveau W[ DRM] Unknown-1 has no encoders, removing
    [ 5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.763283] [drm] No driver support for vblank timestamp query.
    [ 5.763931] nouveau [ DRM] 1 available performance level(s)
    [ 5.763937] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
    [ 5.763939] nouveau [ DRM] c:
    [ 5.765435] nouveau [ DRM] MM: using M2MF for buffer copies
    [ 5.811870] sky2: driver version 1.30
    [ 5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
    [ 5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
    [ 5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
    [ 5.814804] composite sync not supported
    [ 5.815267] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
    [ 5.815425] fbcon: nouveaufb (fb0) is primary device
    [ 5.829143] IT8726 SuperIO detected.
    [ 5.829405] parport_pc 00:09: reported by Plug and Play ACPI
    [ 5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 5.856121] ppdev: user-space parallel port driver
    [ 5.877128] Console: switching to colour frame buffer device 180x56
    [ 5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
    [ 5.878929] nouveau 0000:00:0d.0: registered panic notifier
    [ 5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
    [ 5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
    [ 5.879730] hda_intel: Disabling MSI
    [ 5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
    [ 6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
    [ 6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
    [ 6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
    [ 6.533068] Adding 997756k swap on /dev/sda3. Priority:-1 extents:1 across:997756k
    [ 6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
    [ 6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
    [ 7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
    [ 7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
    [ 7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
    [ 7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
    [ 7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
    [ 7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
    [ 7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
    [ 7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
    [ 8.208529] composite sync not supported
    [ 8.244451] composite sync not supported
    [ 8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
    [ 8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
    [ 20.811802] composite sync not supported
    [ 23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
    [ 84.047784] usb 1-4: USB disconnect, device number 2
    [ 85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
    [ 85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
    [ 85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
    [ 389.250323] composite sync not supported
    Xorg log:
    [ 7.949]
    X.Org X Server 1.14.0
    Release Date: 2013-03-05
    [ 7.949] X Protocol Version 11, Revision 0
    [ 7.949] Build Operating System: Linux 3.8.2-1-ARCH i686
    [ 7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
    [ 7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
    [ 7.949] Build Date: 09 March 2013 11:46:22AM
    [ 7.949]
    [ 7.949] Current version of pixman: 0.28.2
    [ 7.949] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 7.949] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
    [ 7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 8.001] (==) No Layout section. Using the first Screen section.
    [ 8.001] (==) No screen section available. Using defaults.
    [ 8.001] (**) |-->Screen "Default Screen Section" (0)
    [ 8.001] (**) | |-->Monitor "<default monitor>"
    [ 8.011] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 8.011] (==) Automatically adding devices
    [ 8.011] (==) Automatically enabling devices
    [ 8.011] (==) Automatically adding GPU devices
    [ 8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 8.060] Entry deleted from font path.
    [ 8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 8.060] Entry deleted from font path.
    [ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 8.060] Entry deleted from font path.
    [ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 8.060] Entry deleted from font path.
    [ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 8.060] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 8.060] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 8.069] (II) Loader magic: 0x825b620
    [ 8.069] (II) Module ABI versions:
    [ 8.069] X.Org ANSI C Emulation: 0.4
    [ 8.069] X.Org Video Driver: 14.1
    [ 8.069] X.Org XInput driver : 19.1
    [ 8.069] X.Org Server Extension : 7.0
    [ 8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
    [ 8.073] Initializing built-in extension Generic Event Extension
    [ 8.073] Initializing built-in extension SHAPE
    [ 8.073] Initializing built-in extension MIT-SHM
    [ 8.073] Initializing built-in extension XInputExtension
    [ 8.073] Initializing built-in extension XTEST
    [ 8.073] Initializing built-in extension BIG-REQUESTS
    [ 8.073] Initializing built-in extension SYNC
    [ 8.073] Initializing built-in extension XKEYBOARD
    [ 8.073] Initializing built-in extension XC-MISC
    [ 8.073] Initializing built-in extension SECURITY
    [ 8.073] Initializing built-in extension XINERAMA
    [ 8.073] Initializing built-in extension XFIXES
    [ 8.073] Initializing built-in extension RENDER
    [ 8.073] Initializing built-in extension RANDR
    [ 8.073] Initializing built-in extension COMPOSITE
    [ 8.073] Initializing built-in extension DAMAGE
    [ 8.073] Initializing built-in extension MIT-SCREEN-SAVER
    [ 8.073] Initializing built-in extension DOUBLE-BUFFER
    [ 8.073] Initializing built-in extension RECORD
    [ 8.073] Initializing built-in extension DPMS
    [ 8.073] Initializing built-in extension X-Resource
    [ 8.073] Initializing built-in extension XVideo
    [ 8.073] Initializing built-in extension XVideo-MotionCompensation
    [ 8.073] Initializing built-in extension XFree86-VidModeExtension
    [ 8.073] Initializing built-in extension XFree86-DGA
    [ 8.073] Initializing built-in extension XFree86-DRI
    [ 8.073] Initializing built-in extension DRI2
    [ 8.073] (II) LoadModule: "glx"
    [ 8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 8.133] (II) Module glx: vendor="X.Org Foundation"
    [ 8.133] compiled for 1.14.0, module version = 1.0.0
    [ 8.133] ABI class: X.Org Server Extension, version 7.0
    [ 8.133] (==) AIGLX enabled
    [ 8.134] Loading extension GLX
    [ 8.134] (==) Matched nouveau as autoconfigured driver 0
    [ 8.134] (==) Matched nvidia as autoconfigured driver 1
    [ 8.134] (==) Matched nv as autoconfigured driver 2
    [ 8.134] (==) Matched nouveau as autoconfigured driver 3
    [ 8.134] (==) Matched nvidia as autoconfigured driver 4
    [ 8.134] (==) Matched nv as autoconfigured driver 5
    [ 8.134] (==) Matched vesa as autoconfigured driver 6
    [ 8.134] (==) Matched modesetting as autoconfigured driver 7
    [ 8.134] (==) Matched fbdev as autoconfigured driver 8
    [ 8.134] (==) Assigned the driver to the xf86ConfigLayout
    [ 8.134] (II) LoadModule: "nouveau"
    [ 8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 8.154] (II) Module nouveau: vendor="X.Org Foundation"
    [ 8.154] compiled for 1.14.0, module version = 1.0.6
    [ 8.154] Module class: X.Org Video Driver
    [ 8.154] ABI class: X.Org Video Driver, version 14.1
    [ 8.154] (II) LoadModule: "nvidia"
    [ 8.155] (WW) Warning, couldn't open module nvidia
    [ 8.155] (II) UnloadModule: "nvidia"
    [ 8.155] (II) Unloading nvidia
    [ 8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 8.155] (II) LoadModule: "nv"
    [ 8.155] (WW) Warning, couldn't open module nv
    [ 8.155] (II) UnloadModule: "nv"
    [ 8.155] (II) Unloading nv
    [ 8.155] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 8.155] (II) LoadModule: "vesa"
    [ 8.156] (WW) Warning, couldn't open module vesa
    [ 8.156] (II) UnloadModule: "vesa"
    [ 8.156] (II) Unloading vesa
    [ 8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 8.156] (II) LoadModule: "modesetting"
    [ 8.156] (WW) Warning, couldn't open module modesetting
    [ 8.156] (II) UnloadModule: "modesetting"
    [ 8.156] (II) Unloading modesetting
    [ 8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 8.157] (II) LoadModule: "fbdev"
    [ 8.157] (WW) Warning, couldn't open module fbdev
    [ 8.157] (II) UnloadModule: "fbdev"
    [ 8.157] (II) Unloading fbdev
    [ 8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 8.157] (II) NOUVEAU driver
    [ 8.157] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 8.157] RIVA TNT (NV04)
    [ 8.157] RIVA TNT2 (NV05)
    [ 8.157] GeForce 256 (NV10)
    [ 8.157] GeForce 2 (NV11, NV15)
    [ 8.157] GeForce 4MX (NV17, NV18)
    [ 8.157] GeForce 3 (NV20)
    [ 8.158] GeForce 4Ti (NV25, NV28)
    [ 8.158] GeForce FX (NV3x)
    [ 8.158] GeForce 6 (NV4x)
    [ 8.158] GeForce 7 (G7x)
    [ 8.158] GeForce 8 (G8x)
    [ 8.158] GeForce GTX 200 (NVA0)
    [ 8.158] GeForce GTX 400 (NVC0)
    [ 8.158] (++) using VT number 7
    [ 8.175] (II) [drm] nouveau interface version: 1.1.0
    [ 8.175] (II) Loading sub module "dri"
    [ 8.175] (II) LoadModule: "dri"
    [ 8.175] (II) Module "dri" already built-in
    [ 8.175] (II) NOUVEAU(0): Loaded DRI module
    [ 8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
    [ 8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 8.175] (==) NOUVEAU(0): RGB weight 888
    [ 8.175] (==) NOUVEAU(0): Default visual is TrueColor
    [ 8.175] (==) NOUVEAU(0): Using HW cursor
    [ 8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 8.175] (==) NOUVEAU(0): Page flipping enabled
    [ 8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 8.244] (II) NOUVEAU(0): EDID for output VGA-1
    [ 8.244] (II) NOUVEAU(0): Manufacturer: ACR Model: ada8 Serial#: 1937803344
    [ 8.244] (II) NOUVEAU(0): Year: 2007 Week: 38
    [ 8.244] (II) NOUVEAU(0): EDID Version: 1.3
    [ 8.244] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 8.244] (II) NOUVEAU(0): Sync: Separate Composite
    [ 8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
    [ 8.245] (II) NOUVEAU(0): Gamma: 2.20
    [ 8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 8.245] (II) NOUVEAU(0): Default color space is primary color space
    [ 8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349 greenX: 0.328 greenY: 0.547
    [ 8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138 whiteX: 0.313 whiteY: 0.329
    [ 8.245] (II) NOUVEAU(0): Supported established timings:
    [ 8.245] (II) NOUVEAU(0): 720x400@70Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@60Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@67Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@72Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@75Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@56Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@60Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@72Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@75Hz
    [ 8.245] (II) NOUVEAU(0): 832x624@75Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@60Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@70Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@75Hz
    [ 8.245] (II) NOUVEAU(0): 1152x864@75Hz
    [ 8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 8.245] (II) NOUVEAU(0): Supported standard timings:
    [ 8.245] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 8.245] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 75 vid: 3969
    [ 8.245] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 8.245] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 8.245] (II) NOUVEAU(0): Supported detailed timing:
    [ 8.245] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 367 x 229 mm
    [ 8.245] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
    [ 8.245] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
    [ 8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
    [ 8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
    [ 8.245] (II) NOUVEAU(0): Serial No: LA8040344303
    [ 8.245] (II) NOUVEAU(0): EDID (in hex):
    [ 8.245] (II) NOUVEAU(0): 00ffffffffffff000472a8ad50888073
    [ 8.245] (II) NOUVEAU(0): 261101036c251778ee10d59759548c27
    [ 8.246] (II) NOUVEAU(0): 235054bfee8081c0810f9500950f0101
    [ 8.246] (II) NOUVEAU(0): 0101010101019a29a0d0518422305098
    [ 8.246] (II) NOUVEAU(0): 36006fe510000006000000fd00384c1f
    [ 8.246] (II) NOUVEAU(0): 5315000a202020202020000000fc0041
    [ 8.246] (II) NOUVEAU(0): 63657220414c31373136570a000000ff
    [ 8.246] (II) NOUVEAU(0): 004c41383034303334343330330a00aa
    [ 8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz eP)
    [ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752

    I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
    So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
    In the Xorg log, the differences are:
    without 'nouveau.noaccel=1'
    [ 30.761] (II) UnloadModule: "nv"
    [ 30.761] (II) Unloading nv
    [ 30.761] (--) Depth 24 pixmap format is 32 bpp
    [ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
    [ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 30.777] (II) EXA(0): Driver registered support for the following operations:
    [ 30.777] (II) Solid
    [ 30.777] (II) Copy
    [ 30.777] (II) Composite (RENDER acceleration)
    [ 30.777] (II) UploadToScreen
    [ 30.777] (II) DownloadFromScreen
    [ 30.777] (==) NOUVEAU(0): Backing store disabled
    [ 30.777] (==) NOUVEAU(0): Silken mouse enabled
    with 'nouveau.noaccel=1'
    [ 1191.621] (II) UnloadModule: "nv"
    [ 1191.621] (II) Unloading nv
    [ 1191.621] (--) Depth 24 pixmap format is 32 bpp
    [ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
    [ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
    [ 1191.621] (==) NOUVEAU(0): Backing store disabled
    [ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
    [ 1191.621] (==) NOUVEAU(0): DPMS enabled
    So now 3D acceleration is disabled.
    I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
    I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
    Last edited by berbae (2013-03-27 10:07:42)

  • Upgrade EPSON driver (C2800): text no longer prints from preview

    Hi,
    After installing the new EPSON driver under Lion, I can no longer print PDF's from Preview correctly.
    When I print a file, only the graphics are printed, the text is not present.
    I have tried printing several different documents, I have reinstalled the printer two times, but the problems remains.
    The printer (Epson AL-C2800) is connected via its network port, to a Time Capsule.
    When I print from my Windows 7 desktop, all is fine, so I assume the problem is situated on my MacBook Pro.
    Has anybody an idea how to resolve this issue? It is very annoying, because I use my MBP most of the time.
    Thanks in advance for any feedback,
    David

    Hi,
    After installing the new EPSON driver under Lion, I can no longer print PDF's from Preview correctly.
    When I print a file, only the graphics are printed, the text is not present.
    I have tried printing several different documents, I have reinstalled the printer two times, but the problems remains.
    The printer (Epson AL-C2800) is connected via its network port, to a Time Capsule.
    When I print from my Windows 7 desktop, all is fine, so I assume the problem is situated on my MacBook Pro.
    Has anybody an idea how to resolve this issue? It is very annoying, because I use my MBP most of the time.
    Thanks in advance for any feedback,
    David

  • OSX says it can't fix my 2nd drive on startup?

    So I have a 2nd hard drive replacing the optical drive. It's formatted in ExFat so I can access and write on it from both OSX and Win 7.
    Every time I restart the mac or go from windows to osx, it will try to mount the 2nd drive and tells me that it "cant fix the drive, however I can still access it", like there was some seriously wrong thing going on with it.
    I havent really used the drive yet, so Im not sure if I might lose data or not. Im afraid to store stuff in it.
    Does anyone know if that really means something is bad or it just spams that message because of the ExFat thing?
    ps: When I run "diskutil list", it says my 2nd hard drive is WINDOWS NTFS...even though Ive formatted it to ExFat via OSX...

    You can't format a disk as ExFat on Mac OS X
    Read https://discussions.apple.com/thread/4745362
    Allan

  • On my itunes library my albums are all sorted but when  i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad

    on my itunes library my albums are all sorted but when  i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad i would be most gratefully if you could find a way to help
    thatnks

    Never mind, got it to work. I stumbled around on Google for a while and somehow ended up reading things from the 'jailbroken' community. They had easy instructions to get out of Recovery mode. Thanks anyway though!
    P.S. For anyone who experiences this, here is the fix: Hold Power and Home in unison for 6 seconds, then power on as normal.

  • Your firmware can not be updated because the hard drive...SMC 1.3

    Hi all !
    I have a problem. I'm have a macbook pro Santa Rosa =
    Model Name: MacBook Pro
    Model Identifier: MacBookPro4,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 4 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP41.00C1.B03
    SMC Version (system): 1.27f1
    This morning I saw the update for the SMC firmware (1.3).
    Before restarting, I have this error :
    http://img411.imageshack.us/img411/6606/26048579.jpg
    Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partiton or RAID scheme.
    When I went into Disk Utility in order to check, here is what I have =
    Name : FUJITSU MHY2200BH Media
    Type : Disk
    Partition Map Scheme : GUID Partition Table
    Disk Identifier : disk0
    Media Name : FUJITSU MHY2200BH Media
    Media Type : Generic
    Connection Bus : Serial ATA 2
    Device Tree : /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
    Writable : Yes
    Ejectable : No
    Mac OS 9 Drivers Installed : No
    Location : Internal
    Total Capacity : 186.3 GB (200,049,647,616 Bytes)
    S.M.A.R.T. Status : Verified
    Disk Number : 0
    Partition Number : 0
    I thought Boot Camp could be involved becauseI know it's the only thing related to the EFI.
    I searched on internet, and Ifound nothing. There was a solution in order to reset the partition table, but the tool is no longer available. The link on on the application explains that I have to reformat my macbook pro. I find a bit weird to make this , I can't spend hours for backup / restore just because the SMC update does not work. have you any lead for me ?
    Thanks ,
    Razique

    Have you tried this:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

    I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • HT201250 I want to use Time Machine to back up my pictures because my hard drive is full but I'm wondering if once I back up the pictures then delete them will time machine delete them off the back up too?

    I want to use Time Machine to back up my pictures because my hard drive is full but I'm wondering if once I back up the pictures then delete them will time machine delete them off the back up too?

    Evetually yes.
    If your pictures have been in the same location (same folder, same subfolder, ...) for more than a week, then copies if them will remain in your TM backups until it fills up. They are then vulnerable to being deleted.
    If they've been there for less than a week, TM could delete them as early as a month from now. If they've been there for only a few hours, chances are TM will delete them tomorrow.
    This is why TM is not the best tool to use to archive data that you will be deleting from your main hard drive. Copy them to a dedicated external drive, or burn DVDs.

  • I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

    I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.  
    Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
    How do I solve this problem?

    Hi again Hal
    Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
    You have also tried resetting the PRAM as I suggestion in your other thread...?
    See resetting the PRAM > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Can't remove Gimp drivers to install new Epson driver

    I just bought a new Photo printer (Epson Stylus Photo R1800.)
    I go to add the printer in the Printer Setup Utility
    click Add (The printer appears in the Printer Browser)
    I select it; Then it wants me to select the driver from the list in the "Print Using" drop down.
    The driver doesn't appear on the list.
    I get a ESPON list but only the Gimp list.
    ESPON tech support said these 'old' drivers may be conflicting with the new one.
    SO, I try to delete old drivers. I delete ESPON folder from Library>Printers. RESTART.
    EPSON - Gimp still there.
    SO, I also delete Gimp.pkg from Library>Receipts. RESTART
    EPSON - Gimp still there.
    How do I get rid of these Gimp Epson drivers so I have a chance of loading the new drivers?
    I have loaded the driver from the Epson CD 5 times and it doesn't show up anywhere.
    Any hints?

    Shows you how much the Epson Tech Support people know...........
    There is no conflict. You ADD using a different method - After clicking ADD, don't immediately accept the printer when it appears in the browser - instead, click More Printers, then select Epson USB or Epson Firewire, then select Format for: All. Now you are using the Epson driver instead of the Gimp-Print one. Deleting the Gimp-Print drivers won't change this procedure.

Maybe you are looking for

  • Organizing for Finder as well as inside IPhoto

    I need help organizing photos in IPhoto. I know how to do it inside it's library, but if i'm emailing a picture or printing it or anything like that, all that shows up is stuff like " 2006-10-07_16.36" and stuff like that. What can i do?

  • Rebate Processing -  Value Difference -Verfication level and Sales  Volume

    Dear All , We are using standard rebate process - Customer Rebates   and we have encountered the following issue . 1. The Rebate agreement was created on 01/12/2010 with validity from 01/12/2001 , valid through 31/03/2010.The Rebate recipient was not

  • Disk i/o question

    As I believe our workflow will be I/O bound just as it is now, the new machine I build will have a raidcard  setup for data storage. The work we do entails editing imageI up to 3--4GB max, no rendering. I haven't yet decided which sas/sata card and w

  • Information kept in client browser cache

    Hi all, Does anyone know what kind of information is stored in client browser cache when users are logged into Planning or Workspace? We have a concern from customer Information Security department concerning to confidential information (data) that c

  • My PC does not recognize my ipad, what to do?

    My itunes does not recognize my ipad & my ipad indicates it needs to sync with itunes. what should I do?