Osx 10.8.4 does not run macbook pro late 2011

does any have issues after installing osx 10.8.4???  because i have an issue after i update my macbook pro late 2011 ,it doesn't start and only stay on the mac logo and appears the pointer i restarted many times and does not work the only option i had is  to reinstall the osx 10.8.3. can anybody help me with this issue??  thank you.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Similar Messages

  • I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

    I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

    Have you looked on Lexmark's support site?
    http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

  • MacBook Pro late 2011 not switching to ATI graphics when running off mains power.

    Hi there.
    My MacBook Pro late 2011 doesn't appear to be switching to ATI graphics when running off mains power. It always seems to stay on the Intel adapter instead. I've checked the option in the energy saver settings and it's ticked to "Automatically switch..." and when I untick this box, it switches to ATI and stays that way even when running on battery (as expected). Either way it will not switch to ATI graphics when plugged into mains unless forced to in this way.
    Any one else seen this? Very frustrating when trying to run an external monitor with the Intel adapter!
    Thanks in advance.
    Dan

    "As a last resort I opened the bottom cover and disconnected the battery power plug (MagSafe adapter also disconnected)."
    After everything was disconnected did you press the power button and walk away for 5 minutes? Try that, just had one restart after waiting for that long.

  • My japanese macbook pro (late 2011) physical keyboard does not match with the on screen japanese keyboard in windows 8.1 so does caps lock

    I am using windows 8.1 pro on my Japanese macbook pro (Late 2011) and enabled japanese language but the problem is that when i press caps lock (lower left corner) it changes the input method from english to japanese. I checked my on screen keyboard (OSK) in windows and its different from my physical keyboard i.e. keys are different on my physical keyboard compared to OSK. Can anyone help me?
    Thanks
    Tenadona

    Can I suggest the following articles, which are worth reviewing?
    Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support
    Boot Camp: Apple Wireless Keyboard keyboard mapping in Windows - Apple Support
    Boot Camp: Windows commands on an Apple keyboard
    Windows does require language packs to be installed, if you want the physical keyboard to match the on-screen keyboard.

  • MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion freezes on wake up

    Hi,
    My MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion (up to date) 1 week old freezes on wake up.
    Plugged on power or not, same issues.
    No apps running.
    When it goes to sleep itself i wake it up it freezes for few seconds
    When i put it to sleep mode same issue.
    With the lid same issue...
    I already try setting up the sleep mode from 3 to 0 with terminal command it didn't work.
    Can it be an hardware issue ?
    Any ideas ?

    Dear TheSmokeMonster, Dear all MacBook pro 13'' late 2011 users,
    Here is the update.
    As TheSmokeMonster mentionned (above) they asked me to reinstall MAC OSX Lion by shutting down the computer and holding cmd + R while switching it off. Then you choose the language and you are good to go for a looooonngg 4GB download (it took me 8hours yeah chinese ADSL :-/ )
    Lion reinstalled itself automatically and restarted. - it did not solve the issue.
    I called Apple Care again and we try to run the hardware diagnostic by restarting the computer and holding D. FYI do not try it as this command does not work on the new version of macbook pro.
    Here is the intersting part! As the Apple Care already did everything they could to help me. We booked an appointment the my local Apple Store in Shanghai (a real one )
    The Genius remake again the SMC and PRAM reset - same issues and he also tried to boot Lion from his own external hard drive - Same issues. So we started to think that it was a Hardware problem.
    We tried another MBP 13'' late 2011 (last hardware update) in the shop to see if it works properly and it DOESN'T!
    Yeah you heard me. I have been trying more than 10 MBP 13'' (2.4Ghz 4GB and 2.8Ghz 4GB) put them asleep and they all freeze on wake up!! it also does it on Mac book air 13'' it seems to be a global issue on all the new 13'' machines. A compatibility problem between Lion and the new hardware architecture of the 13'' ? just my guess.
    Anyway FYI this issue doesn't occur on MBP 15 and 17"
    I was just amazed by this global problem so was the genuis. We could not find any solutions cause even a replacement one will have the same problem. They told me i could change for a 15" but i had to go back to the Apple shop where i bought it which is 2000Kms away not really convenient So i file the cas and i took my MBP 13'' back with me.
    They will contact me later for further explanation.
    To be continued.

  • After upgrading to yosemite my macbook pro late 2011 does a random sound from time to time.

    After upgrading to yosemite my macbook pro late 2011 does a random sound from time to time. Its completely random and i already checked all apps in use and its not from them.

    Sounds like Notifications app.
    Maybe some other app. In SystemPreferences->Users&Groups->LoginItems tab: remove all entries with the minus sign underneath. This will not uninstall anything, you have to start those apps by hand now. Restart.
    Still there?
    Yes: Restart again while holding the shift key, this will start the mac in SafeMode: only the necessary items are loaded to run.
    Still there?
    Yes: Make an etrecheck list and post it here.
    No: Restart, put the items in the LoginItems back, one by one, restart after each entry, and you will find the "culprit"
    Please report accordingly. I will be back in 24 hours.

  • How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

    How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
    Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
    MacBook Pro:
      Vendor Name:    Apple, Inc.
      Device Name:    MacBook Pro
      UID:    0x0001000A17016E60
      Firmware Version:    22,1
      Port:
      Status:    No devices connected
      Link Status:    7
      Port Micro Firmware Version:    FFFF.FF.FF

    You are correct, here is what Apple Says:
    http://support.apple.com/kb/TS3775
    I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
    Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
    If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

  • Does airplay mirroring work on MacBook Pro late 2011 ( Mac OS X Lion 10.7.5)?

    Hi guys,
    I would like to use airplay mirroring on apple tv (3rd generation) with my macbook pro late 2011, unfortunately the airplay option does not appear in the display preferences (see screenshot below). Did someone have this problem before? Please advise!
    Thank you!
    Tial

    Welcome to the Apple Support Communities
    See > http://support.apple.com/kb/HT5404 Your computer is compatible with AirPlay Mirroring, but you have to upgrade to OS X Mountain Lion to get AirPlay Mirroring.
    Make a Time Machine backup and/or a clone with Carbon Copy Cloner, open App Store and purchase Mountain Lion. When the download finishes, the installer will appear, so follow the steps to upgrade. To turn on AirPlay Mirroring, select the AirPlay icon in the menu bar or open System Preferences > Displays

  • Help! MacBook Pro Late 2011 Not Charging

    My MacBook Pro Late 2011 is Not Charging. I have tried plugging it into multiple outlets and none have succeeded. He is a screenshot of my System Information>Power: http://grab.by/tkOM. I have no clue what happened. Last night we had a massive storm, but I don't believe there was any thunder or lightning. Whenever I plug the adapter into an outlet, the battery usage in the top right hand corner shows the "plugged in" icon, then it shows the "charging" icon. Then it just goes blank and back to normal. I have tried to restart it and do the SMC or whatever, but nothing seems to work. I have had this charger for a little bit over 1 year. Thanks in advance!
    - Sellers C.

    Hey Angelo_here,
    I'd run through these steps:
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    via: Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • Will OS Mountain Lion slow down my MacBook Pro (Late 2011) running 10.7.5?

    I have a Macbook Pro (Late 2011) that is currently running OS Lion 10.7.5. I was just wondering if updating to OS Mountain Lion would slow it down in terms of performance, or if it will have any other bugs on my MacBook?
    PS. When updating to a different OS, do I have to back up my files to like a hard drive or something?

    When updating to a different OS, do I have to back up my files to like a hard drive or something?
    A back up is a precaution that you should always have, not just when installing an update to the OS. Its purpose is no different from the seat belt you wear when you drive. Use it all the time, and hope it will never be really necessary.

  • Macbook Pro late 2011 not powering on. The charger shows a blinking dim orange/green light.

    Macbook Pro late 2011 not powering on. The charger shows a blinking dim orange/green light. I have tried pressing the small button on the side of the macbook pro to check the battery, but no lights show up.

    Hey Angelo_here,
    I'd run through these steps:
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    via: Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • 15" Macbook Pro late 2011 is running hot.

    My 15.4" Macbook Pro late 2011 (box instalation) is running hot at 200F and the fan jumps to 6000rpm without any real reason.
    I know it is not normal, what can I do? Clean install or service?

    Thanks guys,
    Hardware testing passed.
    Did a SMC reset and it seems at least for now that the RPM jump happens more smoothly and not to 6000rpm.
    I will try this weekend to stress it a little and see how it behaves. (I will also upgrade the memory to 8GB)
    In the end I think I will do a clean install and see I there will be any more improvements.
    I'll keep you posted.

  • MacBook Pro Late 2011 : Optical Disk Drive not working?

    MacBook Pro Late 2011 : Optical Disk Drive not working?
    When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
    I have resetted SMC and PRAM; no chages.
    Don't know what to do. Please help.
    Thank you.

    Clean the heads.
    check to see if it is under warranty.
    buy external DVD/CD rw

  • I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

    I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

    Bahamaguy wrote:
    I have a MacBook pro late 2011 version it's not booting up ....
    So what you want is to be able to boot from OS X and retrieve your files
    Create a data recovery/undelete external boot drive
    Of course if it's not booting up, it's easier to fix in place
    ..Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
    ...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
    "Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
    If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
    If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
    Most commonly used backup methods
    So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
    There is no Startup Manager option to choose what to boot from?
    This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
    What did you use to make the external OS X USB bootable drive?

  • Both Internal hard drives fail on Macbook Pro late-2011

    Both internal hard drives (SSD and HDD) failed on Macbook Pro late-2011.
    Setup: MBP closed with Thunderbolt display attached.
    Problem on HDD-A
    I called Apple Support to log an issue with my MBP2011. The system is made up of 2 drives - SSD (128GB) and HDD with 2 partitions HDD-A and HDD-B(original 750GB).
    HDD-A has LionOSX 10.7 and HDD-B is storage. SSD has LionOSX on it as well. I normally boot HDD-A.
    I was working on HDD-A and the Kernel Panic screen appeared prompting me to shutdown the machine and start it up again.
    I tried to reboot HDD-A and the grey progress bar appeared for a long time. I then forced shutdown and rebooted into SSD.
    I was able to boot from SSD and then I opened Disk Utility to check the drives. I verified the disk for HDD-A and there was an error. I then tried to repair disk and it couldn't repair it. A dialogue said the disk could not be repaired and that data should be backed up.
    HDD-A was not visible in Finder but HDD-B was accessible.
    I verified HDD-B and it was "ok".
    I shutdown, booted from SSD, disk utility HDD-A and the same message occurred.
    I called Apple Support and they advised that I boot from my external HDD which was a clone of HDD-A.
    Solution
    I was successfully able to boot from the Clone HDD-A.
    HDD-A was able to be accessed and I could retrieve the files from HDD-A.
    I copied over the latest files from HDD-A to an external drive.
    Same Problem on SSD
    Boot from SSD, i started working for about 3 hours, with the lid closed, and attached to the ACD.
    Kernel Panic screen happened again on the SSD.
    Couldn't boot boot from either SSD or HDD-A.
    I booted from Cloned HDD-A, Disk Utility verify and repair returned errors on SSD. The same issue had occurred on the second drive.
    Disk Recovery from a boot recovery USB thumb, Disk Utility, erased SSD, verify was ok.
    Tried to install then there was an install error saying that SSD was damaged (large triangle warning icon). Tried 3 times, failed.
    Boot from Recovery Drive HDD-A, downloaded LionOSX.
    Next steps
    Format HDD-A and HDD-B into 2 partitions
    Install LionOSX on HDD A.
    Note:
    I did not do any software updates for about a week before 14.04.2012 and suspect it might be due to the virus.
    I normally work with the lid closed and attached to the ACD, I also suspect that overheating caused both drives to fail. However, I have been using this system with the lid closed for atleast a week. One Kernel Panic screen occured.

    Depending on what you are doing on the computer, how hard you are working the computer, it should not overheat. And if it does it should shut down or get very slow because when it starts to overheat the CPU will be throttled back to a lower Ghz speed and or just shut down so it doesn't cause damage to the CPU. The Kernel Panics are a sign that something else is going on. This could be software or hardware.
    If after wiping the drives and reinstall Lion on the SSD if the system is running OK then the drives are fine, IE they are not bad. There is something else corrupting them. Again this could be hardware or software, but I doubt it is heat. And using the MBP ion clamshell mode should not cause overheating or excessive heating of either of the drives.
    Have you installed iStat Pro or Menu and kept and eye on the temps? If not install iStat Pro and keep and eye on the temps. I bet they do not get above the 150°- 180°F mark which although hot is not overheating.
    Be very careful when calling Apple. Removing the DVD drive and installing a hard drive in that bay could void your warranty. The DVD is not a User Removable part and Apple frowns on doing that. So if you call them do not mention that you have replaced the DVD drive with another HDD.
    Honestly I suspect you have a hardware problem. But the only way to know that is to install just Lion and your basic programs and run the system. Leave out any AV type software, if you are running some. If you don't get any kernel panics thenn install some of your other software, one programm at a time. If with just the OS and basic software you get a kernel panic then it is hardware related and needs to be checked out by Apple. If you do that re-install the DVD and the original HDD with just the OS on it before you take it in.

Maybe you are looking for