Osx 10.8.5 and Java 7.40 not working

Hi there,
as a newly Apple user I get frustrated...
Many online services require JAVA installation, for instance Cisco webex. As i have osx 10.8.5 and Java 7.40 installed I thought I had done all there is. But...
The Java test site (http://www.java.com/en/download/testjava.js) pregonises the JAVA installation (it doesn't say install) but there is no information about my device. The square stays white.
I have checked the java insallation, enable browser-boxes, decreased security levels, cleared the cache, reinstalled, I have the admin rights etc etc. This didn't help.
Besides that. Many application require JAVA installation. These applications don't work.
At this point, I can use solution directions.... I doubt if I'm the only one with this problem and ther isn't a solution..
Thanks in front,
Jonkman

Uninstall 7.40 and download and install 7 Update 25.
Currently, this is what I have on my system and works just fine.
As a matter of fact, in the Java Control Panel in System Preferences
claims that this is the recommended version.
There may be bugs (it is Java after) in the 40 release which is why the update
to 40 has not been flagged.

Similar Messages

The connectivity between ABAP and JAVA system is not working properly.

Hi,
I have Installed ECC5.0 ABAP system and Netweaver JAVA system with different SID's in single box. While Installing JAVA systen I have selected UME as ABAP system and Installation was success. Once I restart MMC the JAVA server process thowing an rc -11113.
I have pasted trace file for Server process. Please send me any suggestions ASAP.
[Thr 4500] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4500] JLaunchISetClusterId: set cluster id 31689350
[Thr 4500] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 4500] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 4180] Thu Apr 19 12:06:29 2007
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
[Thr 4748] Thu Apr 19 12:06:30 2007
[Thr 4748] JLaunchIExitJava: exit hook is called (rc=-11113)
[Thr 4748] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 940893 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 4748] JLaunchCloseProgram: good bye (exitcode=-11113)
Thanks,
Suraj

Hi,
It clearly says the problem is with virtual memory. SO you need to change your virtual memory settings using configtool.
See the relevant note.940893
Make changes in the VM parameters for Bootstarp, Dispatched and the server nodes. Your -Xms should be less than equal to -Xmx.
Restart the cluster then.
It should work.
Do reward good points.

Communication between SOAP and java proxy does not work

Hi Group,
i want to proceed following scenario:
SOAP->XI->JavaProxy
For that i have created of the message interface of a remote function module my java proxy.
Calling the java proxy with following scenario works successfully:
RFC->XI->JavaProxy
Further, i have created in the integration engine(configuration) my wsdl file. In the SAP
Netwaever Developer Studio, i have made a standalone proxy project, that is consuming the
web service out of the wsdl file.
Testing the web service client with following example works fine:
SOAP->XI->RFC
But when i try the scenario SOAP->XI->JavaProxy, i get following rmi exception on client side:
java.rmi.RemoteException: Service call exception; nested exception is:
java.lang.Exception: Element 'Z_GPS_PING.Response' not found in response message.
at com.demo.sap.MI_WEBSRV_GPS_PING_OUTBBindingStub.MI_WEBSRV_GPS_PING_OUTB(MI_WEBSRV_GPS_PING_OUTBBindingStub.java:86)
at com.demo.test.TT_Pinger.main(TT_Pinger.java:36)
Caused by: java.lang.Exception: Element 'Z_GPS_PING.Response' not found in response message.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.getResponseDocument(MimeHttpBinding.java:942)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1231)
at com.demo.sap.MI_WEBSRV_GPS_PING_OUTBBindingStub.MI_WEBSRV_GPS_PING_OUTB(MI_WEBSRV_GPS_PING_OUTBBindingStub.java:79)
... 1 more
In the monitoring, the execution of both directions is ok. In the response message, i can see the result of the java proxy.
Here is the result:
<ns:Z_GPS_PING.Response xmlns:ns="urn:sap-com:document:sap:rfc:functions">
<E_RETURNCODE>PINGOK </E_RETURNCODE>
</ns:Z_GPS_PING.Response>
My first thought, was, that i have a problem with the prefix, so i have changed it via xslt transformation into "rfc",
but it got the same error message.
Does anyone know, which problem we have here?
For any hint or suggestion, i would be much obliged.
Greetings,
Sigi
P.S. WAS and Sap Netweave Dev Studio is on patch level 12

Hi Group,
the SAP has solved the Problem now.
The coresponding OSS note is: 862926
(release date 18.07.05)
The reason was, that the response payload name wasn't
"maindocument". For that, the adapter didn't found the payload and returned an emty one.
Greetings,
Sigi

Mac OSX 10.9 (Mavericks) and D110 PhotoSmart Scanner not working together

My HP Scanning Software for my D110 PhotoSmart printer stopped working with the upgrade on my IMac from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Help! I don't want to have to use something like VueScan and abandon HP. I really need to be able to save scanned documents to disk, and right now my scanner won't let me save scanned pages.

Hello all,
I see that you are having issues scanning in MAC OX 10.9. The problem is that there are no drivers available for the D110 for Mavericks at the moment. The first link below will bring you to another page in the forums that will show you an alternate way of scanning.
http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Problems-scanning-with-HP-printer-and-Maver...
This second link will take you to the download page for your printer. Keep checking back there to see if there are drivers available. There are still newer printers then yours that don't have drivers, so you will have to be patient.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=4023246&
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HT1199 I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

Backup first
It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
Erase before the install
Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
During the install
Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

My mid 2010 Macbook pro running OSX 10.8.4 sd card reader will not work

I have a Macbook Pro 13" mid 2010 model running OSX 10.8.4. I don't use the card reader very often so I can't tell you the last time it worked, but I have used it a few times without issue. (probably not for at least a year though)
I searched the forums and it seems this was an older problem with lots of suggested fixes. I tried blowing air through the slot and I also went looking for XQuartz but cannot find it under my utilities. (I assume it must be in the X11 category that is no longer supported under 10.8.4?)
I have tried putting it in all the way and pulling it out slightly as one person suggested and that also did not work.
Any ideas? For the first time in a long time I need the card slot and it doesn't feel like cooperating. LOL
edited to add that I am trying to access a Sony SDHC 32GB card model SF-32NX
Thanks in advance,
Wayne

If you haven't already done so, eject the card by dragging its icon to the Eject icon in the Dock (where the Trash icon usually is.) Make sure the write-lock switch on the card is in the unlocked position. Then reinsert the card and test.
If there's no change, and the same happens with more than one card, the card reader is stuck in write-locked mode. I don't generally advise do-it-yourself hardware repair, but one ASC member managed to fix this problem. I haven't tried the fix myself and I can't offer any guidance beyond what's in that discussion. If you cause damage, don't expect your warranty to cover it. I suggest you instead make a "Genius" appointment at an Apple Store.

Java script is not working in custom tabular form

hai all,
i have changed my built in tabular form to custom tabular form.my java script is coding working fine in built in tabular form . But in my custom tabular form java script is not working ,since it is created as standard report(Display As).
pls help me.
with thanks and regards
sivakumar.G

Is the appostrophe function test(pthis) *'* present in your javascript code...
If not can you post the same in apex.oracle.com and give the credential so that I can the why its not wroking
Regards,
Shijesh

Java command still not working - please help

i have installed jdk1.6.0_05. The javac command works fine but the java command does not work at all. even when i try java HelloWorld i receive this exception message
Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld
Caused by: java.lang.ClassNotFoundException: HelloWorld
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
please help (you to SUN)!!

bart@kerberos:~$ javac -help
Usage: javac <options> <source files>
where possible options include:
-g                         Generate all debugging info
-g:none                    Generate no debugging info
-g:{lines,vars,source}     Generate only some debugging info
-nowarn                    Generate no warnings
-verbose                   Output messages about what the compiler is doing
-deprecation               Output source locations where deprecated APIs are used
-classpath <path>          Specify where to find user class files and annotation processors
-cp <path>                 Specify where to find user class files and annotation processors
-sourcepath <path>         Specify where to find input source files
-bootclasspath <path>      Override location of bootstrap class files
-extdirs <dirs>            Override location of installed extensions
-endorseddirs <dirs>       Override location of endorsed standards path
-proc:{none,only}          Control whether annotation processing and/or compilation is done.
-processor <class1>[,<class2>,<class3>...]Names of the annotation processors to run; bypasses default discovery process
-processorpath <path>      Specify where to find annotation processors
-d <directory>             Specify where to place generated class files
-s <directory>             Specify where to place generated source files
-implicit:{none,class}     Specify whether or not to generate class files for implicitly referenced files
-encoding <encoding>       Specify character encoding used by source files
-source <release>          Provide source compatibility with specified release
-target <release>          Generate class files for specific VM version
-version                   Version information
-help                      Print a synopsis of standard options
-Akey[=value]              Options to pass to annotation processors
-X                         Print a synopsis of nonstandard options
-J<flag>                   Pass <flag> directly to the runtime systemSee the bold part.
More information: [http://java.sun.com/docs/books/tutorial/java/package/managingfiles.html]

TS3048 Right click on Mighty Mouse and Wireless Keyboard are not working

I have a 24" iMac, early 2009 Lion,10.7.5. My wireless keyboard and mighty mouse are not working properly. Wireless keyboard- I can turn it on and it will ask me to pair it with the Blue Tooth. I cannot log the numbers in - I even tried logging them in with my wired keyboard device (which is an Apple keyboard).
My Mighty Mouse's right click stopped working as well.
I have gone through all of the troubleshooting steps-
New Batteries - Cleared Blue tooth preferences list, repaired permissions, Cleared cache, Made sure that the settings were correct ex: key was not checked on mouse, Removed both devises (keyboard, and mouse) from blue tooth and allowed them to be discovered again, PRAM reset, Hardware check/ reset, and lastly, Reinstall of OSX.
I am still having the same issue with both devices.
Thank you.

This is why you should always have a wired keyboard and mouse as backups.
Try smc and hope for the best.
I'd also suggest pram reset but you need the keyboard for that.

Could not find an installed JDK, SCM Java Tools may not work until registry

Hello all,
I've downloaded the latest full version of Designer (10.1.2.3), but getting installation error: Could not find an installed JDK, SCM Java Tools may not work until registry
Any solution?

3. install the Designer 10.1.2.3 patch to the Developer suite home.When I try to do this at C:\oracle\product\Ora10gDSR2, I get a message OUI-10137: An Oracle Home with name OUIHome already exits at C:\OraHome (a directory that doesn't exist) please specify another name for Oracle Home.
I don't want to just specify another name because cleaning up these faulty installations requires deleting registry keys, etc, since the deinstall does't really remove everything sufficiently to start with a clean slate.
I also got the Java JDK message because the JDK 5 is no longer being put straight onto the C drive, it is buried in C:\Sun\SDK\jdk, so some java programs have to be pointed to it. The Oracle installer doesn't provide this option.
Also, Michael, your post, "Re: Designer 10.1.2.3 on windows Xp Posted: Oct 20, 2007 7:05 AM in response to: mmehdi" is full of unreadable characters and question marks. Maybe I don't have a font you are using. There are also references to a zip file and a Word document that aren't there.
Anyway, thanks for all your time and effort,
Edward

HT1338 Hi, as I shall correct Java for a new mountain ...? Java is currently not working at all Jarda

Hi, as I shall correct Java for a new mountain ...?
Java is currently not working at all
Jarda

Your question doesn't make much sense, so this is a WAG. Launch the Java Preferences.app in /Utilities, install the Java Runtime Environment when prompted, and, when that's finished, enable Java and Web Start apps.

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

HDMI and PC inputs do not work on my 37AV502R LCD TV

HDMI inputs and PC inputs do not work consistently
my Apple TV (HDMI) and computers 2 on HDMI, 1 on PC, display just fine n the TV but after a while the TV goes blank,
the time is not consistent sometime a few minutes, sometimes a few hours,
but every time, after the TV goes blank there is nothing I can do, the TV just stays blank, if I unplug and turn back on the TV displays the image for a split second and goes bank again,
I thought it might be an overheating thing, however sometimes the PC input will stop working but the HDMI input (either one) will work fine,
has anyone else had this issue?
Thanks
A.

I'm having the same issue. As soon as I connect it to VGA or HDMI, it goes into a cycle of flashing on-and-off. A guy on youtube had the same problem (posted a video identical to my problem) and reportedly fixed it with a firmware update.
The problem: the US website doesn't have a firmware download. The canadian website does, but the update is from 4/2009, and the manufactured date on the back of my TV is 5/2009. (I also tried the update, but it didn't fix the problem).
When I call Toshiba to ask about the firmware update, after they confirm I am out of warranty, their automated system keeps hanging up on me. So frustrating.

How to delete video from iTunes library? del and shift+del are not working - no any reaction

how to delete video from iTunes library? del and shift+del are not working - no any reaction.

seb963 wrote:
Hi
Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

Osx 10.8.5 and Java 7.40 not working

Similar Messages

Maybe you are looking for