OSX 10.8.5 not able to print color with HP photosmart 1115

I used to be able to print in color with this computer/laptop combo but after the upgrade to OS 10.8.5, there is no color option for printing. Please help!
This question was solved.
View Solution.

Hi,
The Photosmart 1115 is not officially supported on Mac OS X since version 10.5.
You may try using the 3rd party HPIJS print drivers, those are compatible with 10.8 and list the Photosmart 1115 as supported.
Be sure to install any of the 3 required downloads prior following the printer set up instructions:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
Best of luck,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Not able to print cards with design in iphoto any more

At Christmas I needed some more of the cards I had ordered at short notice so I printed them out on my own printer. It worked really well. I have just created a card and went to print but the card template does not print any more. I assume that this has been changed with an update???!! How do I fix??
It will still print the text and photos but not the card template( design)???

Welcome to the Apple Discussions. Are you able to change themes/templates on the cards?
Try this: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.

HP Support Assistant not able to print/scan with my HP photosmart B-209a-m wireless

I am running Windows 7 (64 bit) and rencently my photosmart B-209a-m wireless is not responding when I try to scan or print. I just downloaded the print and scan doctor and I am getting a port match errror. Do you have any suggestions for how I can resolve this issue?
Thank you,

I think your router has issued a new IP address for your printer and the Win software can no longer find the printer.
Let's set a static (non-changing) IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
Next, go to Start > Control Panel > Devices and Printers and delete all instances of the printer.
Finally, re-add the printer in this manner:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Not able to print PDF report from Oracle APPS

adcmctl.sh version 115.17.
We have a network printer HP Laserjet 4250 which is configured on our concurrent manager server of RH Linux OS. We are using HP LASERJET 4250 Postscript driver. We are able to print PDF's directly however through CC manager we are not able to print reports in Proper PDF format. Has anyone faced such an issue with Oracle Apps?

user11996936 wrote:
Has anyone faced such an issue with Oracle Apps?Maybe. Maybe not. Ask to the proper forum. Here you are in Peoplesoft forum.
Nicolas.

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

Not able to print purchase order..

Dear All,
I am not able to print one import purchase order.
I have checked everything and also able to print another import Purchase orders..but particular this PO print out is not coming.
I have deleted message and again created the same..also condition record is maintained...
Not able to see print preview also (Not generating)
What could be the reason?
Please help..
Naren

Hi Naren,
try the note :111062.
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=111062]
Please check the setting mentioned in the note and revert.
Thanks,
Hrishi

Not able to print on Purchase order whatever we fill in item text

not able to print on Purchase order whatever we fill in item text, from where can we link to get printed item text on purchase order

while doing in quality whatever we fill in text in item details of p.o we are getting it printed on p.order
but same thing when we are doing in production we are not able to print on purchase order. where we should look out
for e.g in spro-mm-purchasing-purchase order..

Not able to print reader file

When I convert MS Word files to Adobe Reader files, some people are not able to print them. Some of the content prints for instance, but some is missing. The graphics may print, but the text is missing.
Any ideas?
Thanks,
Brian

Thanks for the response Michael,
Here is a file I converted from Word to a PDF that will only print the graphics.
I am using Word 2007 and Adobe Reader 9 Pro. I have the CS4 suite. When I save, I am using the following parameters:
Convert Document Information
Enable Accessibility and Reflow with tagged Adobe PDF
Create Bookmarks
Convert Word Headings to Bookmarks
I should add that changing and eliminating these parameters make no difference.
Thanks,
Brian

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

Not able to Print Invoice thru Crystal Integration

Hi All,
Could anybody help me on the issue given below.
One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
Thanks,
Vishwanath

Vishwanath,
Please post your question in this forum ...
Reporting and Printing
Eddy

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

it says "the document could not be printed". "There were no ages selected to print".
I selected "all". I always tried selecting pages "1-3".
The only choice that works is current page. Very strange.

Not able to print in duplex

On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
How do I fix this problem?
See screen print picture

Hi,
The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
You may perform manual duplexng on Mac OS using the Pages to Print option as following:
From the file used to print click the File menu and select Print.
NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
From the main drop does menu select Paper Handaling.
The main menu will usually list the program name (e.g. TextEdit).
Will appear as Copies & Pages within Microsoft Office applications.
Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Not able to print anything on ATG Rest webservices

Hi..I am new to ATG Rest.. Just for the heads up, i followed following steps :-
1 ) Added rest module to MANIFEST.MF
2) Created a custom class which looks like this -
package com.sgs.utils;
import atg.nucleus.GenericService;
public class SGSdummy extends GenericService {
public void dummy() throws Exception {
 logDebug("sdbfhj");
3) Mapped it to the property file -
$class=com.sgs.utils.SGSdummy
$scope=global
loggingInfo=true
4) Configured the security for above component in restSecurityConfiguration.xml
<rest-security>
<resource component="/atg/commerce/order/dummy" secure="false">

<method name="dummy" secure="false"/>
</resource>
</rest-security>
I commented acl as i really didn't need it for a POC plus it was throwing 401 unauthorized.
5) Now I am calling it from chrome's Advanced Rest Client. However, status is 200 OK but I am not able to print a logDebug or sysout in my SGSdummy class.
 When i check console, it says "Depth 0 is greater than maximum depth 0"
 I tried to change maxDepthAllowed in configuration.properties but in vain..I need help to proceed.

Now I am trying to create a REST request using custom client. I believe it should be a POST request as I am trying to call a method. My custom client looks like this :-
package atg.rest.client;
import java.io.IOException;
import java.util.HashMap;
import java.util.Map;
import atg.rest.client.RestClientException;
import atg.rest.client.RestComponentHelper;
import atg.rest.client.RestResult;
import atg.rest.client.RestSession;
public class RestDemoClient {
/** The m username. */
private String mUsername;
/** The m password. */
private String mPassword;
/** The m host. */
private String mHost;
/** The m port. */
private int mPort;
/** The m session. */
private RestSession mSession = null;
 * Instantiates a new method call by rest.
public RestDemoClient() {
 * Execute.
 * @throws RestClientException the rest client exception
private void execute() {
 mSession = RestSession
 .createSession(mHost, mPort, mUsername, mPassword);
 mSession.setUseHttpsForLogin(false);
 Map<String,Object> params = new HashMap<String,Object>();
 params.put("atg-rest-input", "json");
 RestResult result = null;
 try {
 result = RestComponentHelper.executeMethod("/atg/rest/SGSdummy", "addOrder", new
 Object[] {}, params, mSession);
 } catch (RestClientException e1) {
 System.out.println(e1);
 try {
 if (result != null && result.getResponseCode() == 200) {
 System.out.println("Executed Successfully.");
 } else {
 System.out
 .println("Error while execution : Error Code ["
 + result.getResponseCode()
 + "] and Message ["
 + result.getResponseMessage() + "]");
 } catch (IOException e) {
 System.out.println("Error while execution Successfully.");
 * @param args
public static void main(String[] args) {
 RestDemoClient stepUtils = new RestDemoClient();
 stepUtils.mUsername = "admin";
 stepUtils.mPassword = "admin";
 stepUtils.mHost = "localhost";
 stepUtils.mPort = 8080;
 stepUtils.execute();
But everytime i execute this, I get following exception :-
atg.rest.client.RestClientException: java.io.IOException: Unauthorized Server returned HTTP response code: 401 for URL: http://localhost:8080/rest/bean/atg/rest/SGSdummy/addOrder
Exception in thread "main" java.lang.NullPointerException
at atg.rest.client.RestDemoClient.execute(RestDemoClient.java:64)
at atg.rest.client.RestDemoClient.main(RestDemoClient.java:82)
I tried different set of credentials but nothing seems to work out for me.
However it always works fine for GET requests. I am able to see status as 200 OK but it never hits my addOrder() method in SGSdummy class, hence I am not able to print sysout in that method. For status 200 OK GET requests, my logs say "[JSONOutputCustomizer] Depth 0 is greater than maximum depth 0. Outputting object of class java.lang.String as string rather than continuing to nest."
Can you give me some pointers how to run it without any errors plus it should print a random sysout in my custom class. Thanks

Not able to print multiple copies

Hi All,
We are not able to print multiple copies on network printer having device type HP LaserJet2430 even though we are giving no. of copies as 3 or 4 while creating spool request.
Please help me to solve this issue.
OS - windows.
SAP 4.7 EE
Thanks in Advance,
Basis Admin

Hi,
Give one test print from OS Level mostly, this will be problem in printer configuration
Regards,
Ramesh.B

OSX 10.8.5 not able to print color with HP photosmart 1115

Similar Messages

Maybe you are looking for