OSX 10.8 Install Stuck at Less Than Minute

Instaling to a MacPro with 4 Hard Drives...been stuck on Les than A minute for 24 hours now...should I still wait? 
Thank You

No. Quit the installer, make a copy of Install OS X Mountain Lion.app to another location, since the ill-designed installer deletes itself as part of its installation process, and then try another upgrade. BTW, hopefully you have a bootable backup/clone so you can revert when the installation goes south.

Similar Messages

  • Osx Lion reinstall stuck at less than a minute

    hhere is the deal. I had to reformat my mid 2012 MacBook Pro after it would freeze up after startup. I reformatted and everything went fine other than the 7 hours it took. I went to reinstall osx lion and it gave me a total time of 12 plus hour. Now it has been stuck at less than a minute for almost an hour. I'm totally nervous that all this time has been wasted for this stupid macbook to just freeze up again. Any suggestions or is this normal??

    I've got the exact same problem. My mac started to freeze up at random. This made it impossible to use. After I tried to reinstall everything, by potentially thinking that it might be some vius, or corruption. I've now been trying to reinstall eveything for aprox 6 hours and I'm stuck at 'less than one minute' and been so for around 2 hours.

  • Lion install hangs at less than 1 minute

    Downloaded and installed Lion accepting the limitations of installing to a raid partition (2 x 2tb raid 0). Suggested would take 33 minutes to install 8 hours ago and now it's stuck at less than 1 minute. Any suggestions? Thanks

    When I installed Lion Server I wasn't even given any options related to installing on a RAID partition. My install hung up and that was that. And because there was no recovery disk there was no way to rescue what was obviously a problem.
    My own experience was using RAID 1 ( mirrored boot disk ).  I split the mirror, recovered Snow Leopard from a Time Machine backup using the Snow Leopard server install disk onto the primary disk from the mirror ( now reformatted as a regular disk ).  Then installation proceeded with no hitches at all.
    Once installation was complete I rebuilt the RAID mirror and the installation is now working.
    However, I can't offer you help with the RAID 0 stripe. All I do know is that all attempts to try and install onto my RAID array ( whether reading about limitations on the Apple website or not ) led to failure and the machine being stuck in a boot/install failure cycle.
    Once I had my server with a regular 'normal' hard drive things proceeded as expected.
    Now I have the joy of looking into my Console and seeing thousands of failures floating up the screen ready for more remediation work :-(.

  • Yosemite 10.10.3 update stuck on 'less than a minute remaining' for 2 hours encounting?

    Yosemite 10.10.3 update stuck on 'less than a minute remaining' for 2 hours encounting?
    Anyone else having this?
    Shall I just wait or can i force shut down or anything like that?
    Thanks.

    I ended up having to force quit by holding down the power button after waiting 4 hours to see if it would resolve itself an load.
    Wouldn't boot up properly, seemed to be stuck on the new apple logo with loading bar below so forced quit again and tried to restore form a time machine back up by holding cmd+R on restart. It said it was unable to do this so restarted again and it eventually started as normal and I was running 10.10.3 although I wasn't sure if the install was done correctly so did complete a restore from a time machine back up.
    I think I will wait for another .1 update or just try again at a later date maybe.
    Thanks.

  • What to do? Operating system update stalled - message installing software update less than a minute

    What to do? Operating system update stalled - message "installing software update less than a minute" but that has lasted hour

    Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart.

  • Time machine restore is stuck at less than a minute.

    I'm trying to restore my Mac from a back up HD and it's been stuck at less than a minute for about an hour. How do I fix it? I just got it back from the depot so it's completely fixed, but it won't restore. Help. :(

    You can power down the mac by holding the power button down for 10 seconds or until the mac powers off.
    To migrate from your HP follow the instructions here:
    http://support.apple.com/kb/HT2518

  • Download stuck at less than a minute remaining

    I have purchased (and paid for) OS X Lion on the App store, and it goes to download as any other app does. Then when it gets to 3.71Gb, it stops there and waits at 'less than a minute'. It won't launch the installer or anything.
    I have installed other apps before, so I know the App store is fine. I am completely up to date with snow leopard, and no other apps are running.
    Really starting to **** me off as I want to upgrade to iCloud.

    How long does it take? I remember it can take a while.

  • Mac store downloads stuck at less than a minute remaining... Forever!

    So yeah, new to Macs but I'm pretty sure I haven't done anything wrong.
    Macbook Pro late 2011 15 inch, Lion 10.7.2.
    Got my new mac back home yesterday, very excited, and, very excitedly, opened the app store to buy Logic. Paid, cool, no problem, then I try downloading. Starts off a bit slow (8 hours for 400 something MBs) then changes to days after a minute, then changes to "less than a minute remaining" and then stops downloading. Left it over night to see if it would pick up and to my joy it did, overnight it reached 260 MBs, then left it downloading while I went to work, and it didn't move another inch. Tried downloading a free app or two and the same things would happen. Would hit the dreaded "less than a minute remaining" of death and stop downloading.
    This common for macs?
    Shouldn't be a internet problem. My windows laptop still downloads speedy as ever.

    If you are referring to Logic Pro it's only a 413 MB file...  shouldn't take more than several minutes to download.
    Try this...
    Since your are new to Macs it may be a bit confusing to find files.
    Click and hold the Finder icon in the Dock (bottom of the screen on the left) then click New Finder Window.
    Now from the menu bar top of your screen click Go > Go to Folder
    Type this in ~/Library/Caches/com.apple.appstore/Cache.db
    Move the Cache.db file to the Trash.
    Restart your Mac. Try re downloading Logic.
    Note...   If you installed anti virus software or any programs such as LIttle Snitch or Speed Download, alll three can prevent files from downloading from the App Store.

  • Migration Assistant Stuck at "Less than a minute remaining"

    Migrating from old G5 single CPU to dual 2.3 G5. Tiger to Tiger. The dual has a clean install from the setup disk, but no software updates -- I just followed the onscreen instructions regarding when and how to do the migration via Firewire target disk mode.
    The migration ran for 2 hours, the minutes counting down just fine, but it stopped with "Less than a minute remaining." There it sits, fans blowing, workday slipping away. Any ideas? Is the migration probably finished? Some lonnnng verification occuring?
    Thanks,
    Paul Otteson

    Wait another hour. If it doesn't work, you may have insufficient space to finish the migration, or a bad firewire cable for or interface on the drive in question.
    Consider the steps suggested for PowerPC to Intel migration. They are more likely to work:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0

  • Install freezes at less than one minute remaining

    What is a nondestructive resolution for Lion installation that freezes at less than one minute remaining.  The istall does not finish.

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • Latest update 7.1.2 stuck with less than one minute remaining

    I Couldn't download anymore apps and noticed I needed to update my software to the latest version so thought that this would solve the problem. I started the update at 11pm last night and after waiting 2 hours with it on  charge and connected to wifi it still said less than one minute remaining.  Searches on internet suggest a hard reboot but will this loose my apps as some I have are no longer available to get?  I have backed up photos etc to the cloud so not too worried about those.
    any advise please   Thanks in advance

    iOS: Apple logo with progress bar after updating or restoring from backup
    http://support.apple.com/kb/TS3681
    If you can't download apps, it's probably because you don't have sufficient storage space. You need to increase your Available space.
    iPhone, iPad, and iPod: Understanding capacity
    http://support.apple.com/kb/ht1867
    How much space is used by your Other? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    How to Remove “Other” Data from iPhone, iPad and iPod Touch
    http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
    What is “Other” and What Can I Do About It?
    https://discussions.apple.com/docs/DOC-5142
    iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
    http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
    6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
    http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
    Also,
    How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
    http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
    What is Stored in iCloud and What is Not
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/what-is-s tored-in-icloud
     Cheers, Tom

  • Installation stuck on last screen with less than minute

    Installing mavericks. Has been stuck over an hour. Can't call Apple because I can't retrieve serial#

    Went to bed and 5 hours later, it had unstuck itself!!  I am a happy camper since the Genius bar is not part of my day today.  Thank you so much for the help.  I guess two hours just wasn't long enough.

  • Stuck with less than a minute

    Problem: Update Yosemite, MacBook Pro 2011, After 8 hours was still stuck, my computer went off as I forgot to plug it in. Yosemite, I movie update finished, the recovery update is not installed. Is there anything I should know before I try this again?

    You can power down the mac by holding the power button down for 10 seconds or until the mac powers off.
    To migrate from your HP follow the instructions here:
    http://support.apple.com/kb/HT2518

  • Installing arch with less than 64mb RAM...

    Hi!
    Maybe I will need to install linux to old machines, pentium 2, with 64mb ram maximum...
    I love archlinux... but, there is any way to install it with that ram amount?
    (as I read that the new livecd install needs at least 192mb ram?)

    Sorry, I didn't read your post correctly
    This way, I guess you'll find this thread disappointing
    http://bbs.archlinux.org/viewtopic.php?id=36615
    Last edited by jlcordeiro (2009-06-03 05:00:02)

  • "Less than a minute remaining" for over a few hours with Migration Assistant

    Hi everyone,
    I am migrating to a MBP Retina running latest 10.7. I am using migration assistant to import a user from my new Time Capsule.   It's stuck on "Less than a minute remaining" for over a few hours that I noticed it.  What should I do?
    (Yes, I am on Wireless N and I do not own a ethernet adapter)
    Any help,suggestion, wait/not wait?
    Thanks,
    Chester

    my recommendation stems mostly from what others have replied to similar posts. I personally think it is probably done, and a hard shut down and restart will probably work. but also see this good reply from WZZZ
    https://discussions.apple.com/thread/5050660

Maybe you are looking for

  • Report: Vendor Line Items

    Hello Everyone, I would like to know, is there any report available with Vendor Line items with P.org and Plant, when i check the report FBL1N, there is no field available for P.org, and Plant field is available but plant is not getting updated. Actu

  • Image not displayed correctly in image control at small zoom level

    I am displaying an image in an image control with a zoom factor of ~0.015 and it appears as shown in image 1.jpg.  When I zoom in a little more to ~0.016 the image is displayed correctly as shown in image 2.jpg.  Both images are attached. Why is the

  • Import from Canon HF G10

    I have a Canon HF G10 that is set to shoot in recording mode MXP with a fram rate of 60i.  When i import the video into FCPX i see 1920 x 1080 | 29.97 fps 1080i HD under the info tab for each clip.  Did i import it correctly?  Am i doing something wr

  • Cluster node fails after testing removing both interconnects in a two node

    Hi, cluster node panics and fails to join cluster after testing removing both interconnects in a two node cluster. cluster is up on one node , but the panic'ed node fails to rejoin cluster saying no sufficient quorum yet and both clinterconn failed (

  • Songs to be used as ringtones

    I forgot how to do it How do I search for songs and save them to my Music appl on my Droixd X?