Osx 10.8 mountain lion compatibility and crashing issues

I upgraded my old mac laptop a special edition 1278 that is aluminum unibody, yes they do exist. It has 2Ghz intel core2duo 8gb ram a 7200rpm hyrid 500gb hard drive on a 13" frame with the now standard one big button touchpad. I had gone from snow to lion to now mountain lion.
Well, FIRST WARNING, I ASSUMED Adobe Creative Cloud should work with mountain lion since it was working with lion, WRONG!
upon upgrading completeing, and trying to launch Adobe Creative Cloud CS6 Dreamweaver,I was informed by Adobe application control that "your computer is not authorized to use adobe creative cloud....can not activate software....you have already reached the maximum activations of two".
Well one of the activations was this laptop running lion and now since I didn't know to deactivate the software before upgrading I can't deactivate it and then reactivate it under mountain lion.
The ONLY adobe solution?....get ready for this....Deactivate my subscription killing all computers ability to use the adobe software, ALL PRODUCTS for....get ready for this....24 hours. Then I can reactivate the two computers i want to use the software on.
Unacceptable solution. especially since further checking on many sites DO NOT LIST CS6 Products to be compatible with mountain lion.
Secondly, since upgrading to mountain lion and it upgrading xcode and xcode related files....it crashes when trying to run programs/apps during development.
It doesn't matter how complex or simple they are...they can be lank apple supplied templates. If i click Products->Run a few seconds later xcode crash!
If you have a fix for either of these issues please drop me a line with useful suggestions I appreciate it.
and no. let's be clear on this-although it feels this way, my head is not up my....thank you for that comment or suggestion up front
I am looking for a serious solution.
<Email Edited by Host>

champcohen wrote:
i'm running os x 10.7.4 and have been unable to get the cisco usb printer software installed on my powerbook. did you have any issues with that or can you direct me to the software you installed on yours?
I'm on a 2008 Macbook Pro. The initial installation went smoothly for me. I'm not sure where to download the VUSB software online, I believe it downloaded the file when I was using the Connect Cloud setup interface. I clicked on devices, then add device, then usb printer. It should walk you through the steps and download VUSB during that process.

Similar Messages

Mountain Lion Freezes and crashes Safari.

Tried to download Mountain Lion to my Mac Desktop but it freezes after 53mb.
Now when I try to open Safari it says it aborted unexpectedly and advise to click reopen.
When I do this it just takes me back to the error message page.
Anyone care to help / advise?

First run the two resets and then try Safe Mode
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Safe Mode

After upgrading to OSX-10.8 (mountain lion) CS5 Bridge Crashes when opening.

I know others have commented on this "issue". I also notice that elsewhere on the web, there are reports of it being a Radeon ATI issue. I've tried repairing links / permissions, tried re-installing the latest Bridge update... All to no avail.
PLEASE help Adobe. My CS5 Bridge is useless now. I'm seriously contemplating restoring 10.7.
Process:
Adobe Bridge CS5 [3373]
Path:
/Applications/Adobe Bridge CS5/Adobe Bridge CS5.app/Contents/MacOS/Adobe Bridge CS5
Identifier:
com.adobe.bridge4
Version:
4.0.5.11 (4.0.5.11)
Code Type:
X86 (Native)
Parent Process: launchd [221]
User ID:
501
Date/Time:
2012-07-31 17:53:48.898 +1000
OS Version:
Mac OS X 10.8 (12A269)
Report Version: 10
Interval Since Last Report:
5671 sec
Crashes Since Last Report:
10
Per-App Interval Since Last Report: 34 sec
Per-App Crashes Since Last Report:   10
Anonymous UUID:
1157DD9D-250F-46CA-B3AE-1988FE0DDCCE
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000000956a000
VM Regions Near 0x956a000:
shared memory
0000000009561000-000000000956a000 [   36K] r--/r-- SM=SHM
--> shared memory
000000000956a000-000000000956b000 [
4K] rw-/rw- SM=SHM
VM_ALLOCATE
0000000009571000-0000000009573000 [
8K] rw-/rwx SM=PRV
etc...

Reposting myself here:
Have you made your user Library-folder visible in Finder?
I did that in the Terminal and shortly after that the crashes started for me.
I just updated to 10.8.2 and that made the user Library-folder invisible again.
At the same time Bridge started behaving properly.
Not saying that's anything other than a coincidence.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

IMac 27" (late 2011), Mountain Lion, Bootcamp, and OSX partition disappearing and refusing to mount

Hey all,
I'm putting this as a question in the discussion forms for bootcamp as I'm not sure where else to put it, but I resolved an issue I was having and having spent all of yesterday and the day before reading through this community and some others looking for answers and mostly seeing "hope you have backups, time to format!" (which to me is not always the best answer), I thought I would put it here for search purposes (with all the key words I had to use) in case anyone else has a similar issue.
My scenario was this:
2011 27" iMac with Mountain Lion installed and Windows 7 installed on a boot camp partition.
1) Haven't been in windows in a while, wanted to play some windows only steam games. Load windows 7. All is well. Have fun. Time to reboot into osx.
2) Reboot using bootcamp toolbar icon.
3) Wander away from computer. Come back to find windows 7 has loaded again. "That's weird", I think. Reboot again, this time hold down option key to select boot device.
4) Discover the only options are the Bootcamp partition and the Recovery partition. OSX "Macintosh HD" partition has disappeared. Huh.
5) Load recovery partition and load disk utility.
6) Review disk utility to discover the Macintosh HD partition shows up in the list, but won't mount. Run verify and repair tools. Errors are as follows: Invalid node structure, invalid key length, invalid record count, etc etc. Running a repair fails - disk utility advises me to back up and erase the drive and that the partition is unrepairable. No offense disk utility, but I think I'll try a few more options first.
7) Purchase DiskWarrior on advice of multiple posters in other threads and general online consensus of it being capable of fixing these sorts of errors. Go through process of loading bootable dvd.
8) Diskwarrior cannot see the Macintosh HD partition. This is bad. Review more threads. Advice is that if diskwarrior can't fix it, hope you have backups and wipe the drive. Likely to be hardware failure. I'm skeptical of hardware failure, because windows is chugging along running fine if I boot into it, and I ran a scan of the windows partition and it came back clean. SMART status is also showing the drive is ok. However, running out of options and starting to lose hope.
9) Follow advice in this support topic: http://support.apple.com/kb/ts1417?viewlocale=de_de Both safe mode and disk utility aren't options (safe mode won't work without it seeing the partition) so sounds like fsck is the final option.
10) Start up in Single User Mode (http://support.apple.com/kb/HT1492). Run fsck per instructions. It reports back ok.
11) Realize fsck is checking the recovery partition, and not my damaged OSX partition. Realize I don't know anything about unix commands and have no idea how to tell fsck to check a different partition.
12) Learn that I need to find out what the drive id is for the damaged partition. Reboot, load up disk utility, select greyed out "macintosh HD" partition, click info. Write down the id: disk0s2 (likely to be the default for you as well if you have one drive in your imac and a default bootcamp install).
13) Go back into single user mode and type the following (without quotes): "fsck_hfs -fy /dev/disk0s2"
14) (Forgot to copy down exactly what it said at this point, but gist of it was that the drive had errors and isnt repairable). Feel like ****, thinking this is unlikely to resolve itself nicely.
15) With nothing to lose, try to force fsck to rebuild the catalog - "fsck_hfs -rc -d /dev/disk0s2" I found this syntax on some forums and can't find the thread again. I have no idea what the -rc and -d do that -fy don't, but if someone can let me know, that'd be cool. Either way, this resulted in something actually happening. Tells me it is "rebuilding catalogue b-tree". Still, finishes with a bunch of errors about improperly linked files, more node errors, etc etc.
16) Retry "fsck_hfs -fy /dev/disk0s2". It seems to be doing stuff now, even though there are lots of errors. Continue to re-run fsck using this syntax. Probably ran it 10-15 times. Takes over an hour. Finally, minimal errors being reported.
17) Realize that perhaps I should try Diskwarrior again now, since I've managed to do soemthing to the partition with fsck.
18) Run Diskwarrior from bootable DVD. Success! It now sees the damaged partition. Reports that it has a bunch of damaged crtitical files, and needs to be repaired, but hey, at least it can see it.
19) Let Diskwarrior do its thing, and reboot.
20) Boot from repaired OSX partition. Rejoice. Immediately plug back in the timemachine drive you foolishly unplugged to take away over the holidays and neglected to plug back in before you had commenced work on stuff you didnt want to lose through formatting, which is why you are so desperate to recover files rather than wiping and restoring from time machine backups and avoiding this whole mess.
TL;DR - If Disk Utility and DriveWarrior fail you, try running fsck (using different syntax that apple recommends) as many times as it takes to get the partition to a stage where diskwarrior can see it. All advice I saw for similar questions was to erase, reinstall OSX, and restore from time machine backup. For those of you who are foolish like me and had files that werent time machine'd, or those who operate without, maybe try this.
Hope this helps!

What -rc & -d do.
From: The fsck_hfs manual page.
https://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages /man8/fsck_hfs.8.html
-d      Display debugging information. This option may provide useful information when fsck_hfs cannot repair a damaged file system.
-r      Rebuild the catalog btree. This is synonymous with -Rc.
-R flags Rebuilds the requested btree. The following flags are supported:
                         a       Attribute btree
                         c       Catalog btree
                         e       Extents overflow btree
I had the same problem as you but unfortunately "fsck_hfs -rc -d /dev/disk0s2" is failing saying: "The volume   could not be verified completely." I believe it's supposed to be telling me the partition's name (normally "Macintosh HD") between 'volume' and 'could' because there's 3 spaces in between the words.
"fsck_hfs -fy /dev/disk0s2" is failing with the same error.
I tried "fsck_hfs -r -d /dev/disk0s2" since the c appears redundant with a lowercase R. and it again says it cannot be verified completely and adds "volume check failed with error 7". Which unfortunately is not documented on the fsck_hfs man page!
Unfortunately for me, Diskwarrior still can't see my busted Mac OS partition.

Osx mountain lion print and scan problems

I purchased OSX 10.8 mountain lion upgrade it shut down one of my computers and I had to repair my drive and go back to Lion OSX.
The other one has made it unable to scan and shows some programs incorrectly comcast email etc. Almost like a Windows safe mode look.
Any ideas or help?
Thanks

Well I can only say it works great on my two machines, 2007 iMac and 2010 MacBook Pro and these have 4Gb of Ram. Does not you help you but I can only say how it works for me.
Have you run Activity Monitor and checked if any processes are using lots of CPU/Mem etc. Also anything in the Console Logs. Something is slowing it down, bad install or third party software etc.
If you have just installed a few minutes ago, Spotlight as to index the disk and this can take a while, it will run slow while this is occuring but will sort itself out, it will indicate if it is spotlight if you try to use it.
regards

I would like to upgrade my macbook from 10.6.8 to Mountain lion. however, the app store said that my macbook isn't compatible with the mountain lion . Why can't I update it to mountain lion? and How can I upgrade it to a newer version ?

I would like to upgrade my macbook from 10.6.8 (Snow Leopard) to Mountain Lion. However, app store said that my macbook is not compatible with Mountain Lion? Why can't I upgrade my macbook to mountain lion? And How can I upgrade my macbk to a newer version such that I can download the newest version of imovie?
Here r the system info of my macbook:
Mac oS X (version 10.6.8)
Processor :2.2 GHz Intel Core 2 Duo
Memory: 2 GB 667 MHz DDR2 SDRAM
Model Identifier: Macbook 3,1
I

Requirements for Mountain Lion:
http://www.apple.com/osx/specs/

Looking to move data from OSX 9 to Mountain Lion using external hard drive?

Looking to move data from OSX 9 to Mountain Lion using external hard drive?

Thanks. I'd like to get rid of this OSX 9 after retrieving a few files. If I wanted to erase it's hard drive before I do so, would powering off then on again and immediately start tapping the F10 button do the trick as it does with a PC?

Im running on 10.6.8 On my mac...But i downloaded Mountain Lion recently and theres always an error once i try run it..do i need Snow Leopard 1st and then Mountain Lion..HELP!!

Im running on 10.6.8 On my mac...But i downloaded Mountain Lion recently and theres always an error once i try run it..do i need Snow Leopard 1st and then Mountain Lion..HELP!!

Sorry Josh, I'm having a bad day with my illness.
Can I ask you to repost this question? Might try in the Mountain Lion forum as well as here.
Put "Mountain Lion Install fails" in the headline box, then from your second post -
"When i run The OSX Mountain Lion Icon i downloaded from the App Store it always gets to the point when its about to restart but the it keeps saying "please quit the application and try again" Now i've tried Re-Downloading it a lot of times but that doesn't work"
and add the Mac specification -
MacBook7.1
2GB RAM
Upgrading from Snow Leopard 10.6.8
Sorry I can't concentrate sufficiently today.

How can i down great a new mac pro 13" retina with osx 10.8 Mountain Lion to osx 10.7 lion?

Hi Guy's,
Can you help me with the following problem please?
I have a new Macbook pro 13" with retina and a ssd HD.
On this machine is a osx 10.8 Mountain lion installed.
I need to down great this machine to osx 10.7.3. lion
Bud it won't work.
I use a usb key to bood to 10.7.3 it works always on a normal macbook pro.
Can someone help me on this please?

You can't. No new Mac can run any older version of OS X then what originally came on it.
There are a few exceptions but to do so you would need a model that also came with the older OS at some point but then you would also need the older OS X installer files. Which aren't available to a Mac that came with a later OS X version.

HT4854 When trying to download Mountain Lion, I get the following message: "We could not complete your purchase. OSX 10.8 Mountain Lion requires a Core 2 Duo, .... processor." However, my Mac lists a 2GHz Intel Core Duo as its processor. Help?

When trying to download Mountain Lion, I get the following message: "We could not complete your purchase. OSX 10.8 Mountain Lion requires a Core 2 Duo, .... processor." However, my iMac lists a 2GHz Intel Core Duo as its processor. Help?

Welcome to the Apple Support Communities
Mountain Lion is a 64-bit operating system, and an Intel Core Duo processor is only 32-bit, so you can't use Mountain Lion on your Mac. You can keep using your actual OS X version or buy a new Mac if you want Mountain Lion

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on. The Tech told me to

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

Go to the  menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

Can I install windows 7 on my portable HDD from my Mountain lion? and how i need to do it?

Can I Install Windows 7 on my portable HDD from Mountain lion ? And how i need to do it?

Welcome to the Apple Support Communities
Because of a Microsoft restriction, Windows can't be installed on an external drive (there are workarounds, but you need Windows). Apart from that, Boot Camp only works with the hard drive where you have installed OS X, so you can't use it to install Windows on an external drive

Using Mountain Lion iOS and audio output will not change from internal speakers to AppleTV so that sound can come from TV speakers, why??

I am using Mountain Lion iOS and trying to connect my MacBook Pro to my plasma TV using AppleTV and AirPlay mirroring. The video does just fine. However, there is no audio coming from the TV. After activating AirPlay I try to select Apple TV as the audio output in System Preferences and it highlights it but then immediately goes back to Internal Speakers and only has sound coming from the MacBook Pro..
What's going wrong ?????
AJ

Are you sure that WIFI network doesn't have an AppleTV on it? Just because you don't own it doesn't mean there isn't one on that network. The laptop or better said the OS cannot differentiate between an AppleTV that you own or not. If it sees one on the network, it will show you one as being available. The automatic reconnection is happening probably because the last time you streamed to an AppleTV, you didn't drop that connection before sleeping the computer or shutting down iTunes.

Osx 10.8 mountain lion compatibility and crashing issues

Similar Messages

Maybe you are looking for