OSX 10.8 with Cisco Connect

Dear All, Anyone have the experience of the Cisco connect run in Mac OSX 10.8 ? After I complete the upgrading to OSX 10,8 , the Cisco connect showing it does not support, so that I can't access to the EA 3200 USB storage. Anyone can solve it ? Thanks in Advance !

i think that newer version of os x is not yet supported
reading from this link it said that it is only compatible to 10.7
also i checked the cisco connect release notes for E3200 it says here http://homedownloads.cisco.com/downloads/868/914/1_4_I_Cisco_Connect_Release_Notes,4.txt that and confirms that its only for 10.7

Similar Messages

Cisco Connect won't connect to E2000 router

I've had an E2000 router set up and working fine for years. Today I tried to connect to it with Cisco Connect, as I'd like to enable a separate guest network (incidentally, if there's a way to do this through the web management interface, please let me know!). However, the software fails to connect to the router; the progress bar gets to 25% and then eventually times out. I've tried from multiple computers on the network, both wired and wireless, with the same results. Any suggestions? Thanks!
Solved!
Go to Solution.

Hi A_Generic_User. I believe there's no way to configure the Guest network through the web ui. What you can do is try using the software that you can download from their site. Make sure to turn off any firewall on the computer when running the software to avoid conflict. Also, I suggest that you run the downloaded software on a wired PC to avoid wireless interference. Here is the link to the software, http://support.linksys.com/en-us/support/routers/E2000/download . Hope this helps.

Cisco Connect Software Download

I just purchased the E3000. I am trying to set up my laptop with Cisco Connect software but my CD seems to be broken now. Is there anywhere I can download it?
Thanks
Darlene

If you want to see your router's settings, you don't have to use Cisco Connect. You can use the web GUI for browsing settings using your web browser by logging in at http://192.168.1.1. Then you'll see the administrative "dashboard", and by following the tabs to the settings that you want to look at, you can see everything. I'd also recommend downloading the user guide for your router from Linksys Support, if you haven't already. This explains all the settings in the administrative GUI and will make it much easier to find what you're looking for. By the way, your English is perfectly understandable *smile*.

Cisco connect on E3200

In the beginning everything was fine until i tried to change the PS3 frome NAT3 to NAT2. After many helps from telephone cisco of port forwarding and dmz and such nothing working, i reset the router and uninstalled cisco connect software.
Long story short...
I have internet connection on the laptop, desk top ISP printer and PS3 through the router
Run cisco connect and it says that i am off line
uninstalled, reset router many many times.
Help please

Well if the concerned is just with cisco connect software..
Then you can download the latest cisco connect software from the cisco website ( homesupport.cisco.com ).
Once it is downloaded on your computer.. Run the software it will reconfigure the router settings and will give the option to create your network name and password by urself too..

Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine. I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
Unsupported operating system
The router software supports these operating systems:
- Mac OS X 10.5.8 or later
- Mac OS X 10.6.1 or later
- Mac OS X 10.7 or later
I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
Thanks
Gary

All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

Cisco Connect not installing on OSX Lion

I am unable to install Cisco Connect v 1.3.11006.1 for Mac under OSX Lion 10.7.0 because Lion is not in the list of supported versions of OSX. As a result, the Setup program refuses to run.
Please can you advise when an updated Mac version of the Cisco Connect software will be released?
Thanks,
Daniel.

For everyone... here is the answer..... PLEASE LISTEN...
The software is simply a software version of the WEBLOG version. The "CISCO CONNECT" is simply a bull **bleep** version hyped up, that has a bunch of bloat ware and that is advertised. The Weblog version, which is actually the original "online" control access, that still works, is not mentioned for some reason as a 2nd means of gaining access to your routers information. What I didn't understand is why this web access site was not given before. it's actually very basic. Enter in this "http" access address: What is funny is, Cisco is the only router provider with a software access CD, when it is not needed. It's by far the most unsecure means of trying to access something, especially when it must always be "updated". This Lion update situation is the most evident example that they should just stick with the online version that they still use. So here it is. Just go to this site::: Enter this in....
192.168.1.1
Copy and past that and push enter. As soon as you do, you will enter the weblog. How? It's simple. You access your own web through your own internet connection, so the weblog address automatically detects your cisco router and shows your your security settings. A drop down box will appear. No need to put in a user name,,, Keep it blank. Then type in admin as the password. Sometimes you won't even need to do that. if "admin" doesn't work, type "password". If you are not already connected via your network, then make sure that you have an ethernet connection connected from your computer to port 1, of your router, so you can set up your router correctly, and so that your computer can directly connect to the online weblog, and you can set up your connection. I had to go online, and talk to a service rep on cisco just to get this very simple information. I asked her "why do you guys not have this website information available just in case the software runs into issues like this," and she said, "your riight, we need to address this," and I said, " I'm addressing it right now to those of us who are spending thousands on your products and can't even use it because you guys dont support it with your software." So I hope this helps you guys. ..

Connect sequence with Cisco VPN & BT FON

I have an issue with the connection sequence using Cisco VPN & BT Openzone/FON
I cannot connect the VPN until I have logged in to BT FON/Openzone
This would be ok, but I use a tabbed browser & it is trying to connect all tabs at once over an unsecured link. Also, when (not if) the connection drops I am in the same position.
It should be possible to connect the VPN first, then the browser
Thanks in advance,
Alan
Solved!
Go to Solution.

The VPN client connection cannot be established without a path to BT Openzone, which hosts the VPN server.
That`s just the way VPNs work, you have a server and a client.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

HT201343 I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

Mac Pros don't support Airplay. Only some post 2011 Macs do, MAc Pros aren't amongst them.
http://www.apple.com/uk/osx/specs/
You could try Airparrot software as a workaround.
AC

Cisco ISE with Flex Connect ios 7.4

Hello my name is Ivan
I have a question:
Is possible to do a deployment with cisco ise (trust sec 2.0) and flex connect and web authentication to a cluster of cisco wlc (ios 7.4)?
There are a features or requeriments to configure this?
Regards
Ivan

By "cluster of cisco wlc" are you referring to the HA features for the 5508? HA or not should be irrelevant to the configuration of ISE w/ 7.4 WLC on flex connect.
Configuring CWA (central web auth) via L2/Mac-Filter and RADIUS NAC will require that you have a FlexConnect group built with the desired AP within the group. You will need to build FlexConnect ACLs and apply them to the FlexConnect group that correspond with the various NAC states the client will be in during the CWA process.
You will probably need 1 or 2 Web Policy ACLs
1. allow traffic to/from dns and ISE PSN
2. allow traffic to/from dns, ise and other resources (for instance for posturing/remediation)
Please note that you cannot "dynamically" assign ACLs to FlexConnect APs/Groups as part of the transition from central webauth reqd to RUN. The WebPolicies ACLs are the only ones that can override (think of them like pre-auth acls). Once you finally send back the access-accept for the client you can not apply dynamic acls to the particular wlan/vlan.
For instance if you needed differentiated access on a single network between guest and vendors, you couldn't send an access-accept back with an ACL for vendors vs an ACL for guests - in a FlexConnect environment. They would have to be placed on separate networks with their respective access.
It's possible this type of configuration (much desired) will be allowed in 7.5 whenever it rears its head.

E2100L Cisco Connect and Network Magic compatibility issues with Mac OS X 10.7 Lion

When you will release the latest version for Wireless router Linksys E2100L?, because I bought a MAC with Lion and I can´t use my Router.
Regards,
Daniel

Older versions of Cisco Connect for Mac computers have compatibility issues with the latest release of Mac OS X (10.7 “Lion”). Only Cisco Connect versions 1.4.11222 and newer are compatible with the Lion operating system.
Here is the link to ensure that Cisco Connect can be installed on your Mac: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a4e763be954243cfa0ab960c0fac7105_KB_23xxx_EN_v1.xm...
There is no such information about the release of Cisco Connect for E2100L for the Mac OS X (10.7 “Lion”) compatibility, so you need to wait for further release of the firmrware for E2100L.

Linksys E1200 Connecting with Cisco WAP4410n Wirelssly

I have a Linksys E1200 Wifi Router which is connected on LAN Port 1 with Switch. I have enable DHCP through my Server with Internet Connection Sharing.
Now I want to expand my wireless range with 5 WAP4410n in a building.
Can I connect Cisco WAP4410n with E1200 Router? If yes then what will be the WAP4410n AP Mode?
How can I Connect all 5 APs' with same SSID to expand my wireless range?
Moreover, I can access easily to Linksys E1200 on my machines easily within the range but I want to expand the range without the cable.

You might post a direct link to this forum or particular thread if there is informaton on it available.
Jcol wrote:
Hi! I actually have a similar concern with my Ciscobusiness class device before, but I went to a different forum. Try community.cisco.com and I think they have the answers to your question. Hope this helps!

EA4500 - How do I change the email account the router is associated with in Cisco Connect Cloud?

I have an EA4500 runnign the latest firmware that supports the Cisco Connerct Cloud and I need to change the email account the router is associated with. How do I do this? (Online Help does not explain.)

jrosenbl wrote:
We plan to deploy over 350 of these routers across the country. In our situation, it would not make sense to associate all these routers with one email account or even, at the other extreme, a separate email account for each router. In addition, you have created a management nightmare for us if we pursue this option, because anytime we need to make a change to the email account associated with the router, we would need to re-configure it manually. We need to manage these routers separately and outside of the Cisco Connect Cloud option. I understand that I can downgrade the firmware to the prior release, but this is a temporary fix (eventually security vulnerabilities will be discovered that will force a firmware upgrade - in fact, you have already had one) and I would like to request an option to manage the router outside of the Cisco Connect Cloud email associations. Will this be possible in the near future? Otherwise, we will need to consider another vendor for this project.
Hopefully this should be possible in the future.
I believe that I can make it

When is the update for Cisco Connect software with OS X 10.8 Mountain Lion?

@OfficialLinksys When will @Cisco_Support update Cisco Connect software with OS X 10.8 Mountain Lion compatibility?

I believe all Mac users are waiting for that update but so far it is not yet available. We are yet to hear from Cisco for its official release for the software that is compatible already for Mountain Lion.

Using Cisco Connect with 2 different Routers

I have the linkys n300 E1200 at my office and the Linksys E1000 at my home. How do i configure Cisco Connect to work with both of these routers so i don't have any connectivity issues?

You can only have one Cisco Connect software installed on your computer. What are your challenges with the Linksys routers? Are you experiencing slow connection? Or intermittent connection? Does it occur on both routers? Since the two routers are on two different locations, we need to properly isolate this matter to know what is really causing it.
Updating the router's firmware will help in resolving connectivity difficulties. If the wireless connection drops, you can also try adjusting the wireless channels of the router. I am using channel 9 for my EA4500 router. Make sure as well that the router is being placed on a higher location or less interference area.
Share more details about this matter. Community users are here to help.
Help, learn and share

Using Cisco Connect with several E1000 routeres

I have two E1000 routeres, one at home and one at the office, and I have installed the Cisco Connect (CC) software on my laptop, and used it to congifure both devices with.
The first time I tried to connect CC to the router at the office, it removed the settings from my home router, and accessed the E1000 ok and I could configure it without any problems via CC.
But when I now tries to use CC to configure my home router via CC, it keeps complaining about me not beeing connected to the right router, and CC won't allow me to connect to my home router eventhough I type in the correct password etc.
Does anybody know of a trick to use the same CC for configuring multiple E1000's ? Or how to get CC to "forget" its settings and connect to a new E1000 router?
Thanks.

So the concern that you said is the configuration of the Router ( E1000 ) at home.. So could please inform us the name of the ISP( Internet Service Provider )... So it all depends upon the ISP( Internet Service Provider ) setup...
If you want to configure the router with the help of the CD so for that you need to uninstall the existing Cisco Connect Software from the computer...
Reset the Router and power cycle the network...
Make the following connectivity Modem ----> Router -----> Computer... Then install the Cisco Connect Software... It will help you in configuring the Router...

OSX 10.8 with Cisco Connect

Similar Messages

Maybe you are looking for