OSX 10 burn DVD

I have new macbookpro, and separate cd writer.  Have made video of still photos in iMovie.  How do I burn this to disc for my friends please. This mac doesnt work the same as my old version.
Thanks
Wendy

This is from Finder>Help:
Ciao.

Similar Messages

  • I want to use my home dvd player to burn dvds/cds onto my MacBook Air. Please help!?

    I want to use my home dvd player to burn dvds/cds onto my MacBook Air. I have an hdmi cord with thunderbolt connector. Where do I go from here?

    Apps for OSX aren't in iTunes: they are in the App Store in your Applications folder. The payment method is the one registered in iTunes. There's no app actually called Yoga Studio, though there are several Yoga apps. There is an iOS app called Yoga Studio but it appears to have no OSX equivalent, though I haven't done a detailed search.

  • Burning DVD files....

    Can someone please answer this question.....
    Which Roxio Toast app is compatible with my Macbook?
    I need to be able to burn .dvd/.avi files For Later Viewing, Not For Re-Sale...
    Macbook OSX 10.4.11
    2GHz Intel 2 Duo

    Hi - and what results you have using Toast? Did you ever used iDVD? I never used Toast but always iDVD, and pretty much every time I run into trouble playing burnt DVD - they skip, or freeze, stutter, etc. I tried all kinds of blank media, thinking that that could be a problem; I started to buy Verbatim with an extra protective layer; I burnt (in iDVD) the discs at 1x speed.... and - still no much of the difference - even if they play once or twice without interruption - the discs will pause, skip, or freeze, or stutter eventually...
    WHAT TO DO, so the burnt DVDs will play smoothly?
    Is the TOAST 9 or 10 any better at this point (than iDVD)???

  • Best Speed 2 Burn DVD's?

    Hello,
    I just replaced my G4's CD-R with a DVD-R. I've read posts offering conflicting advice on the best 'speed' to burn important backup disks. Does anyone know if there's solid info available regarding this question?
    Also, is there some kind of software that can check the 'quality' of the burn?
    Thanks for your time.
    J.C.

    Many G4 Macs were designed before there were fast DVD burners, and use a slow speed ATA bus for the optical drive, and can't send data fast enough to burn over 8X. If you try to burn at 16X, the drive will run out of data and reduce speed, or even worse, go into stop and start mode. This can make a burn slower than at 8X. On my Quicksilver, I could see the drive's LED through the crack in the door, and it would be on solid at 8X, but start flashing at higher speeds. A DVD burned at a steady 8x is probably more reliable than one burned in spurts of 16X.
    All the OSX burning application (Finder, iTunes, Disk Utility) let you set burn speed, except iDVD. It can be used to create a disk image file, which can be burned ay a controlled speed with Disk Utility.

  • Burned DVD-Rs and DVD-RW's won't mount

    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac4,1
    Processor Name: Intel Core Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 2 MB
    Memory: 1.5 GB
    Bus Speed: 667 MHz
    Boot ROM Version: IM41.0055.B08
    SMC Version (system): 1.1f5
    Serial Number (system): W8619*U2P
    Hardware UUID: 00000000-0000-1000-8000-0016CB897C7A
    MATSHITA DVD-R UJ-846:
    Firmware Revision: FB2U
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    OS X 10.6.6 Snow leopard.
    Hi there, I have been experiencing this problem on and off with various media types (originally I had issues burning to any disc - cd or dvd- I upgraded to Snow leopard, and the problem was fixed).
    Now i'm having issues READING home-burned DVD-R's, DVD-RW's ( I avoid using DVD+R's). Commercial dvd's load fine. I can burn to blank DVD fine. I have cleaned the internal DVD drive with a VCD cleaner, and tried resetting the SMC (http://support.apple.com/kb/HT3964).
    I use an LG dvd recorder at home. The discs I use are SONY DVD-R and DVD-RW. These play without error on the LG dvd player.
    However when I try to load the burned discs into the mac, the drive makes a whirring sound and spits out the discs within 10 secs. These are new discs with no scratches etc. I have tried setting the CD&DVD system prefs differently (opening the dvd in disk utility, finder etc) to no avail. I tried both finalizing the discs and un-finalizing them on the DVD player.
    This is driving me nuts as I am a film student and need to access my burned dvds!
    note: I recently had my computer serviced in the last 6months as the hard-drive failed (I live in Christchurch, NZ and the computer was damaged in the Sept 2010 quake). The comp was relatively undamaged in the more recent Feb 22nd 2011 quake, but because of the shaking, could there have been substantial damage to the internal disc drive in this case??
    any help would be greatly appreciated! Cheers
    <Serial Number Edited by Host>

    • Avoid the top five disc-burning mistakes:
    http://www.computerworld.com/s/article/print/9005547/Avoidthe_top_five_disc_burningmistakes
    Not sure what else may be the cause of the issue; but if there's
    a chance of other hardware damage after an earthquake, it
    may be wise to have someone check over the computer.
    {I've asked this post be moved to the Intel-based iMac forum, yet the issue
    is likely a generic one not limited to a build model vintage of computer. My
    name's avatar is of the representative PowerPC iMac G4, of this forum area.}
    For general disc burning, I use a small free-ware utility that makes it clear
    what I may be getting; of course it makes quick work and the other methods
    function correctly on my Macs... see http://burn-osx.sourceforge.net/ and use
    it with the setting for it to make discs that will work in Mac + PC. Worth a look.
    Good luck & happy computing!

  • Is there any hope of using iDVD 7 to burn DVDs (Leopard 10.6.6, Mac Mini)?

    I've tried many of the suggestions in these discussions, short of reinstalling iDVD or wiping the hard drive and reinstalling OSX 10.6.6, and doing that seems excessive simply to use included Apple software. I have more than 260GB available on my hard drive, no external drives open (there are some connected both by FW and USB, but they are not even turned on, just connected to ports).
    iDVD 7.1.1 won't even get past the menu before it fails and gives an error that the 'burn cannot be completed'. There are no 'extras' in the menu, simply ONE QT/iMovie/iDVD compliant 15-second video; no drop zones, no fancy anything, default text for the video 'button', no hyphens or special characters, simply one video from my camera and the application can't get past the menu.
    Should I just go back to burning dvds from my powerbook G4 (tibook) through s-video to a dvd/vhs recorder?

    Hi, and thanks for the quick response. Yes, I have deleted the iDVD preferences about a dozen times. I started out my first project with a positive attitude and set up to burn 4 videos (all non-copyrighted, from my own cameras and library), and decided to fill in some time with slide shows from pictures on the hard drive (not in iPhoto, but they showed up in the iDVD media area and tested fine following the iDVD 'how to' pdf.)
    I had added audio (to the slides), but it was from an external 40-gb firewire drive, and one of the slide shows was from pics stored there.
    I removed those externally-hosted files first, after trying several times to delete the plist file with no better results. Then I removed that hard drive from the picture and turned it off, so no external source files are in play.
    I removed slide shows entirely from the media list after just removing them from the project and menu seemed to have no affect, partly since the error message mentions the 'menu/slideshows' in it's (boilerplate?) dialog box.
    Tried 'burning a disc image' after each modification (reduction of number and length of files) to the project, based on recommendations here.
    With each successive error (none of which got past the menu building phase) I removed another video file; deleted the menus entirely and tried 'new' menus, until I decided to remove all videos from the project and try just that one short 15-second video shot last week for posting on a web forum (it was not one of the original videos I hoped to use).
    I shut off all 'drop zones' from the menus. I used the default fonts and text buttons that appear when you drag a file from the media list into the menu window.
    I even tried rebooting the computer to clear any latent memory that might be causing a problem (as a 'shot in the dark'). After every change, I quit the project and iDVD and deleted the plist, then restarted iDVD and tried again. All to no avail.
    I'm on a budget, that's why I downgraded from my old iMac G5 when it died and switched to the Mac Mini aluminum 4,1, and I'm not looking to upgrade my now useless Toast 5xx to a compatible Toast 10 (even if that might work).
    To recap:
    I started out full-bore with video and photos and music (latter two for slide shows);
    After confirming everything worked together and there were no errors showing in the map view, and running through the slides and video files several times to make sure they 'worked', I tried to burn the disc (no disc image at this point, just a confident full-blown burn). Got the error in the menu phase.
    Started reading the discussions forum (this place) for a couple hours looking at what problems others were having, and trying the suggestions posed therein. No luck.
    Then decided to try deleting preference plist and creating a 'disc image' on the desktop of the entire original project. No luck.
    Then multiple incremental changes to the original project until I was left with the single movie file to see if any of my original media files might be the problem. (I even made sure there were no special characters in the titles, menu buttons, etc of any of those files, as someone mentioned the menus don't like any 'special characters'.)
    So, here we are. I am wondering if maybe the Mini is just not powerful enough to handle burning dvds? (It seems like it isn't platform based, since iDVD doesn't even get through the menu phase). This Mac Mini is about 1 month old.

  • Unable to burn DVD with iMovie?

    Am fairly dissapointed with Apple.
    I have spent time today creating a short movie of photos of my 2 month old son.
    When trying to share with iDVD I have realised that my iLife 11 doesn't come with this software and I can't download it!
    I am therefore unable to burn my project to disc and feel I have wasted my time.
    In my opinion this seriously reduces the usablility of iMovie.
    Is there anyway I can burn the DVD without spending a shed load of cash on some third party software??
    Thanks

    I was also disappointed when I bought my Mac and it came without iWeb and iDVD.
    For burning DVDs, I use a free app called Burn http://burn-osx.sourceforge.net/Pages/English/home.html.
    You can't do fancy menus or anything that iDVD can, but at least you can get your iMovie Projects onto a DVD.
    You have to export your project from iMovie and then drag the .m4v or .mov file that comes out onto Burn (Make sure the Video tab at the top is selected.
    Of course, if you have a MacBook Air, you'll need an external optical drive capable of burning DVDs.

  • I need help finding a program to burn dvds on my ibook

    i have a hp dvd1040 external DVD burner, my ibook g4 reads it, and i can burn cd's,and watch dvds with it, but the program it came with to burn dvd's is only for windows, I'm looking for a free program that i can download but cant seem to find any, any suggestions? thanks!

    Not sure about the capabilities of the HP external drive in question,
    but with a variety of drives known to be supported in Mac OS X
    for certain tasks, there are some freeware and shareware utilities.
    One that may be helpful, if not in that case, in the general arena,
    is this open-source Burn 1.721u freeware. It can do quite a bit:
    http://burn-osx.sourceforge.net/
    It may be, the better type of external DVD recording device would
    be a FireWire one; as they are generally better suited with Macs.
    In any event...
    Good luck & happy computing!

  • MacBook Pro Cannot Burn DVDs

    Both my MacBook Pro and my iMac will not burn DVDs.  They will burn CDs but not DVDs.
    They used to but not anymore.
    I even tried a Aplle Branded DVD and had no luck.  Also TDK and Fuji Film.  Alll of these disks worked before I have half empty 100 packs to prove it.
    I believe there is an issue of some sort of software or firmware upgrade that made this happen but I am not interested and reinstalling an old version of OSX to get the optical drives to work properly.
    Has Apple acknowledged and offered a fix for this yet?
    If I don'y find a solution here there's going to be some warm fuzzy words exchanged at the "Genius" bar this evening.
    Yes I blew out both drives with compressed air and quite frankly I don't feel I should have to buy a large sellection of different brands of DVDs to find one that might work.
    Thanks in advance
    Eric
    2.16 Intel Core Duo 17" mac Book Pro OS X Ver 10.6.6

    The Blank discs are fine.  I am very meticulous.  I've also zapped my Pram and this also makes no difference.
    I spoke to a tech at Apple this AM and he agreed that there is a software problem with the OS and he offered no solution.
    The drive will recod CDRs however.
    I think Apple wrote my laptop out of the OS and they don't care.
    Love you to Apple.
    8 Macs and close to $24,000 invested and this is the love I feel.
    Eric

  • Can burn DVD but not CD

    I don't have any problem burning DVD's using iDVD, but I can't burn a CD using iTunes. It goes through the whole process, checking media, initalizing, burning, etc. then iTunes plays that little doo doo doo sound saying it's done, but then I hear a sound from the burning devise, like an err err err. I can't eject the disc unless I force quit iTunes. When I look at the disc I can see a burned area, so I put it back in the Mac and it says the disc is blank, so I put it in my Pioneer stereo player to get a second opinion and it says the disc is blank too.
    I'm trying to figure out if this is a software or a hardware problem.
    Or is it possible the blank CDs I have are bad? (CD-R 74 min 650 mb) I've tried changing the settings in iTunes preferences but it still doesn't work and I've thrown away 7 CDs so far.
    I have a PowerMac G5 with OSX 10.4.4, Sony DVD RW DW-Q28A burner and iTunes 6.0.2
    PowerMac G5   Mac OS X (10.4.4)  

    It varies by the drive model, not by the OS. So there's no brand that works better with Mac OS X, per se, but rather your current brand may not work well in your iMac's drive where another brand might work better. I've had good luck with Maxell and bad luck with Memorex, but that might not be the case with the drive in your iMac. Try a disk or two of some other brand and see if that works better.
    If another brand doesn't work better, try just a Finder burn to see if the problem is with burning through iTunes or burning in general. If the Finder burn also fails, then the iMac's drive might be dirty (try a lens cleaning disk) or defective.
    Good luck.

  • UJ-846 Superdrive unable to burn DVD+R

    Hello,
    It seems that I can't burn anything on any DVD+R with my superdrive (ref. UJ-846). I've tried with iDVD (initially I wanted to burn one of my home-made movie on DVD), Disc Burner, DiscBlaze, Dragon Burn. Each time, the answer is the same : media is not writable. Is it normal for a "Superdrive" advertised as "Universal"?
    Is there a way to solve this issue, for the moment I don't have any other media within reach and anyway, not to be able to burn a DVD+R is like not to be able to burn anything...

    More info after some additional testing:
    Burned a few DVDs using the internal UJ-846 and Pioneer DVR-109 (in a firewire case). The source image was a Tiger DVD (from an earlier Mac). I used Burnz and Disk Utility to burn two DVD+R's (HP brand) in the DVR-109 and Toast and Disk Utility to burn the same brand discs (and a DVD+RW) in the UJ-846.
    In the case of the DVD+RW, I received the message that it could not calibrate the device to the media (both in Toast and Disk Utility).
    From the DVR-109 burns, my old G3 iBook spit out the resulting discs as unreadable. The iMac (UJ-846) did read the discs but took about 30 seconds from the time of disc insertion until the window showing the Installer appeared completely. The DVR-109 displayed this window 16 seconds after insertion.
    I then burned (using Toast) a data DVD using the same DVD+R media. This disc was burned as "Mac & PC" hybrid. The contents of the disc were folders full of audio files. Again, the G3 iBook refused to read the disc while the UJ-846 took about twice as long as the DVR-109 to mount and open the disc.
    Finally, I burned (using the DVR-109) a Verbatim DVD-R "white-top" printable (8X, pn94654, hub printable, no stacking ring) using the Tiger image file as the source. The resulting DVD was not only was readable in the old G3 iBook but booted it, as well.
    I should note that these discs, when burned with my G5's internal burner (DVR-117 which, I believe, is the DVR-110 but with Apple firmware) would work fine for data (and boot discs) but never produced a video DVD that would play in my set-top box.
    Now, just to be a bit more thorough, I dug up some DVD+R's that I've burned over the past few years. Sonuvagun! Not one of them can be read by the G3 iBook's optical drive. So it's apparent that the old drive just doesn't like +R of any brand (Ridata, HP, JVC).
    Okay, so what have we (I) learned from all this (if anything)?
    It is tempting to say that the results with the old G3 iBook might be ignored because it is, after all, one of the first (500MHz) units produced and everything is much more compatible these days. However, shouldn't a burned DVD (of either the + or - persuasion) be seen as simply a DVD by the Mac once it's been burned? My Intel iMac shows a "+R" or "-R" as part of the disc's icon yet these are =burned= discs. Perhaps I do not remembers when this behavior had changed but I recall that the "+" or "-" ID was only on discs that had yet to be burned; subsequent to burning, this ID was dropped. (or so I recall...)
    Could it be that the "+R" compatibility claims are overstated? But what of the "+RW" disc that gave the "can't calibrate..." error? Should I chalk it up simply to media incompatibility? I have some "+RW" media (HP brand, identified by Toast as "PHILIPS.041."); testing that media results in a successful erase and burn/verify using the UJ-846; no "calibrate..." error as experienced with the Memorex +RW's. Toast sees the disc as a 4X and offers to burn it at that speed but it is really burning at 2X based upon the slow speed of the countdown in Toast's window.
    I remember reading something about "book-type" when I used to burn with a PC; perhaps that's an issue? Or maybe that's just a red herring.
    In any case, I'll have to do some more testing with a few more older Macs to see if they can read the older DVD+R & +RW I already have and any new ones I burn with the U-846 and DVR_109 using Intel OSX in my iMac.
    Comments and suggestions always welcome.
    Intel iMac 20" / MacBook   Mac OS X (10.4.6)   Where the h* did all these firewire drives come from?

  • How to burn dvd r disk using a superdrive

    how do you burn a dvdr disk in osx mountain lion?

    SEARCH!!!
    http://lmgtfy.com/?q=how+to+burn+dvd+on+mac

  • Has anybody bought toast roxio to burn dvd's using the lion?

    Since the new mac OSx lion doesn't have idvd or ilife you can't burn dvd from imovie.  I was wondering if anyone has bought toast roxio for macs to burn dvds.  Would it be worth buying?  Any input would be appreciated.

    helenefromwilton wrote:
    Since the new mac OSx lion doesn't have idvd or ilife you can't burn dvd from imovie.  I was wondering if anyone has bought toast roxio for macs to burn dvds.  Would it be worth buying?  Any input would be appreciated.
    As a total burning suite, Roxio Toast is excellent and worth every cent. I have been using it for ten years or more and the later releases are super stable and haven't had a disc burning error for a couple of years. A bit limited in themes as babowa mentioned, if that is important to you. But as an overall Mac compatable burner, 5 stars from me. Not cheap, so weigh it up against iLife '11 for your overall needs.
    Good Luck

  • Can anyone recommend an application to burn DVDs from iMovie, I have a MacPro.

    I am looking for a reliable application to burn DVD's from iMovie, apple used to have iDVD but I can't find it on their website, any response will be greatly appreciated, Thank you!

    You can still buy iLife DVDs and install (then update, then update...) iDVD.  iDVD still works with Mavericks.
    <http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES>
    There are other applications to burn DVD
    <http://www.wondershare.com/pro/mac-dvd-creator.html>
    <http://burn-osx.sourceforge.net/Pages/English/home.html>

  • DVD burner won't read burned DVD's

    We have a dual 2Ghz G5 with 2.5Gb's of ram that used to be able to read DVD's that had been burned. Now it will read only commercial DVD's and CD's (it can burn CD's fine). It won't accept non-burned DVD-R's either.

    Hi.
    I have almost the same problem:
    I bought an PM G5 2x2Ghz with 1Ghz of RAM in november 2003, and my superdrive is a model PIONEER DVD-RW DVR-106D that used to brun any kind of dvd's an cd's and had no problem to read burn dvd's.
    But now, it can only burn DVD-R (but no problem for the CD's) and most of the old Dvd's that i burned on my G5 can't be read anymore.
    Can someone tell me what's the problem and how can it be solved.
    thank you very much.
    bye.
    PS: Is it normal thaht i've never been able to read a DVD's burned from windows on MAC OSX but CD's yes?

  • I repeatedly get "error during rendering/encoding of menus/slideshow" message.  This process is the same on my iMac, MacBook and another iMac.  I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

    I keep getting "error during rendering/encoding of menus/slideshows" message.  I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old.  Obviously I'm using iDVD.  I purchased an iMac about a year ago and moved to use this for dvd burning without problem.  A few months ago (approximately) I started to experience problems with burning with the error message above.  I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD.  Still the same message came up.  I lost count of how many times I repeated the process with different clips and variations and the same thing happened.  This was also the case with my MacBook and my husband's iMac.
    After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened.  They told me it must be the process that I am using that is incorrect!
    I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had.  The same message came up so they tried using my clips in one of their mac's.  The same message. They tried it with different clips and the same message.  The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page. 
    I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work!  It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion.  I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy.  It was mentioned that an up-date may have caused the problem on all my macs.
    I feel that this issue should be addressed by Apple as a matter of correctness.
    I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems.  Please Apple, keep/regain your good name and sort this out.
    Jayne Connelly

    Thanks Bengt W for your attention to this matter.  So much appreciated.  And thanks for putting me right on the aim of forums (new to this).  Although, you may regret asking for more information.  I've added everything I can below.
    The process I used is as follows:
    Import recorded clips of between 5 and 15minutes each from my video recorder into i
    Edit the clips (remove unwanted start and endng)
    Add title to front of clips
    ‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
    Open iDVD and ‘create new project’
    Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
    Add 2 submenus for each group of clips
    Select submenu  - drag and drop between 3 – 6 clips in each of the twosubmenus
    Change title colours on clips
    Dragand drop image into drop zones where required
    In‘map’ view I check for any yellow warnings before burning to disc
    In an attempt to remedy the problems I’ve tried the following:
    Try new DVD discs
    Try different themes (favourites and standardones)
    Change images in drop zones
    Start whole process again even from importingfrom camera again
    Two other completely different computers (iMacand MacBook) with iDVD
    Go to apple shop and use their computers to doin iDVD
    Try with one clip and no menu pages added
    Use a clip that I already have that did notoriginate from my camera
    Turn computer off and restart
    New hard drive
    New optical lense (thing)
    New DVD burner
    Saving to disc image rather than dvd disc
    Other points:
    I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
    For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across.  I used a theme that I've used before which has failed and added one sub menu page where the clip went.  It burned to disc image successfully.
    The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this.  That could have been an issue before (I didn’t check it) butnot now.
    Other technical stuff that I don't understand but you may:
    I have…… Mac OS X Version 10.6.7 with all updates onit.  Processor 2.8 GHz Intel Corei7.  Memory 4GB 1067 MHz DDR3.
    iDVD version 7.1.1
    HardwareOverview:
      Model Name: iMac
      Model Identifier: iMac11,1
      Processor Name: Intel Core i7
      Processor Speed: 2.8 GHz
      Number Of Processors: 1
      Total Number Of Cores: 4
      L2 Cache (per core): 256 KB
      L3 Cache: 8 MB
      Memory: 4GB
      Processor Interconnect Speed: 4.8 GT/s
      Boot ROM Version: IM111.0034.B02
    SMC Version (system):            1.54f36
    OPTIARCDVD RW AD-5680H:
      Firmware Revision:     3AHB
      Interconnect:    ATAPI
      Burn Support:   Yes (AppleShipping Drive)
      Cache:    2048KB
      Reads DVD:    Yes
      CD-Write: -R, -RW
      DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
      Write Strategies:  CD-TAO,CD-SAO, CD-Raw, DVD-DAO
      Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
    If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement). 
    Eagerly awaiting your reply.
    Jayne

Maybe you are looking for