OSX 7 Photoshop 4, migration problems with 150:30 error

Luckily my recently deceased MacBookPro (2008) was fully backed-up on "TimeMachine". Good move!
Yesterday I purchased a new machine, with OSX 7 pre-installed, and used "Migration Assistant" to transfer my "Time Machine" saved data to this new machine. Worked great! Fair move!
Unfortunately there is just one glich.
Glitch: Error 150:30 All previous moves negated!
My reasearch indicates that there may be a problem caused by not de-authorizing PS4 on my suddenly-dead machine. (What part of dead do I need to explain?) Result : Dead end.
Now I went searching for some "Flex..." file in the startup disk's hidden Library. Unfortunately, it did not show up during my search.
I found an Adobe page that had promised to help me but the promised support was non-existent, in the end.
Should I attempt to re-download the software—PS4—from the Adobe site using the link in my original Adobe "receipt of purchase" confirmation? (Location: my online account information with Adobe.)
Where should I go from here? What should I do from this point in my search for a solution? What futher information should I be supplying to this forum that would help in formulating a successful solution to my problem?

Mylenium
Thank you for your assistance with this matter.
I am assuming that once I have run this Suite Cleaner Tool, I should sign back into my account, on the Adobe site, and pull up my sales receipt for the original "PS4 upgrade purchase" and re-download PS4—from Adobe— and install the whole programme again. Then, after I go through the procedure of re-registering it with Adobe, on my new machine, it should be fully functional. Hopefully, problem solved!
Please correct me if any part of my assumption is wrong.
Thanks again for your help.
Cheers,
Ralph

Similar Messages

Hello ! I'm using iphone 5 running ios 7.1.1 I have problem with Appstore error and also Safari don't work too. What can I do to fix this problem ?

Hello ! I'm using iphone 5 running ios 7.1.1 and I have problem with appstore error and also Safari doesn't work. what can do I fix this problem ? I need help now my iphone can't do nothing

Need more details. What is your appstore error exactly? and what happens when you try to use Safari?

6i - 10G migration problem with sdo_geometry.srid

I'm migrating a forms application from 6i to 10G and Forms Builder 10G fails to compile a form. The statement it's having a problem with is this:
update nbg_redline_element r set r.geometrie.sdo_srid =p_srid;The error I get is an internal error:
Error 801, at line 0, column 0
Internal error [60513]
Seems Forms 10G can't handle geometry types which 6i could.
Do I have to move this code to the server of is there another way to handle this?
Rene

I'm migrating a forms application from 6i to 10G and Forms Builder 10G fails to compile a form. The statement it's having a problem with is this:
update nbg_redline_element r set r.geometrie.sdo_srid =p_srid;The error I get is an internal error:
Error 801, at line 0, column 0
Internal error [60513]
Seems Forms 10G can't handle geometry types which 6i could.
Do I have to move this code to the server of is there another way to handle this?
Rene

Iphoto migration problems with faces

I recently attempted to migrate my iPhoto Library from my old iMac to my new MBP by copying it to an external drive and then copying that to the MBP hard drive. The iMac was running iPhoto 9 (couldn't upgrade the OS due to RAM limitations) and the MBP is running iPhoto 11. The original library had a minor problem with Faces in that it would always identify a few faces for certain people but even after hitting "confirm" it would still leave those as unconfirmed. A minor annoyance and I didn't really care. Since transferring it however, Faces on the MBP takes literally 5-10 minutes to close once I hit "save" after confirming faces. If I click on the icon in the dock during that time it says "Application Not Responding." In addition, some of the faces are now blank boxes with dashed lines around them.
I've run through all the repair options within iPhoto (via the command-option menu when starting it) including a rebuild. When that didn't help I rebuilt the library with iPhoto Library Manager. Now it doesn't recognize any unconfirmed faces as belonging to anyone whom I've already categorized. I did upload new photos, tagged a couple faces and it didn't recognize that the same face in the same scene in another photo was likely the same person as in the previous 4 photos. Weird. Stranger still is that Faces now has tagged a bunch of people with the wrong names. So I open up Aunt Jane's Faces folder and there's the faces of Uncle Mark, Cousin Pete, etc. Clearly something is corrupted. I could just go back to using the old Library on the iMac and hope it doesn't totally kick the bucket but it's never been the same since I upgraded it to Mountain Lion and I'd really like to have access to my photos on my MBP. Any suggestions? TIA.

Hi, can't be on 10.3, what is the OSX version you're on?
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Reboot & hold option or alt key when opening iPhoto.
Any change?

Photoshop/Bridge CS4 problem with AFP shares

Hello,
I have recently purchased Photoshop CS4 and encountered the following problem: when opening images from a NAS share connected via AFP using File/Open command, Photoshop will correctly display the list of files but Open command in the File open dialog remains disabled after a file is selected from the list.However, I can open the same file by dragging and dropping it from the Finder to the Photoshop Dock icon or later using the Open recent menu command.
Similar problem is visible in Bridge: it will not display the image thumbnails from any of the subfolders in the network share.
I am using Leopard with the latest updates, I have a read/write permissions to the network share and Photoshop/Bridge are the only applications that have problems browsing/opening files from the network share. The NAS unit is a Synology DS-107+ with the latest official firmware.
Futhermore, I have noticed that I can work around the problem by opening the same directory in Finder. After the image thumbnails are visible in Finder, both Photoshop and Bridge will correctly open all files in that directory but opening files from other directories still has the problem.
Does anyone have any idea on what might be causing this strange problem?

This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

After installing firefox 4.0 I've been having problems with rundll error on startup. Norton scan is finding a high risk malware.

Last week I installed firefox 4.0 beta & the next time the computer was restarted a rundll error window appeared that said windows cannot locate file. This file showed up in the startup programs. When norton finds this which is every 1 or 2 days it removes it after a restart but the error & malware comes back. I went back to firefox 3.6 but still have this problem. Can you help?
Thanks, Dennis

It seems unusual that Norton should block and remove firefox updates. Having said that I was posting in a thread about problems with Norton a few days ago see [https://support.mozilla.com/en-US/questions/789617#answer-143767 thread] ''"I down loaded fromFFox the latest down - norton 360 - stopped the down load - stated not to use it - asked to stop running the program - I click yes thinking a problem now on my other computer I cant use FFox as a Browers -"''
I use Norton (NIS) and received only a mild advisory on one Firefox update. I have Windows XP with Firefox3.6.15 & 4RC installed

10g to 11g migration - problem with JhsCollectionModel

I'm trying to migrate a JHS app from Jdev 10.1.3.4 to 11.1.1.2. The only thing worthy of note about the app is that it uses Custom authentication and authorization. Steps I went thru are below. Note that I haven't installed the latest release posted today.
In Jdev 10.1.3.4:
Create a new app with only one entity/VO.
Enable JHS, do app definition with no changes other than selecting Custom authentication and authorization. Run app generator.
Validate app runs successfully.
In Jdev 11.1.1.2:
Open app.
Use ADF migration wizard as is - no changing of any defaults.
Get migration successful messages. There were some errors about the .vm templates and some warnings but nothing significant.
Reenable JHs for this project, select Overwrite for all and answer yes to question Do you want to migrate the Application Structure file from version 10.1.3 to 11.1.1?
Run application generator with below result.
Error: Unable to find the jar file on the source or class path...\path\jhsadfrt-11.1.1.jar....Would you like to add? Answered yes
Get one error: JAG-00149 [ TamJhsModule ] Main Controller Config file cannot be named faces-config.xml.
Modified application definition and changed name for faces-config.xml file
Run application generator again. This time it finishes successfully - just a couple of warnings about the optimistic locking mode and menu model file not being generated.
Make all and get one error:
Error(19,8): com.guideworks.tv.model.client.TamJhsModuleClient is not abstract and does not override abstract method applyBindParams(java.lang.String,java.util.HashMap,java.lang.Boolean) in oracle.jheadstart.model.adfbc.v2.JhsApplicationModule
Fix error by adding an empty override method for the applyBindParams
Make all with no errors.
Try to run application and get errors (after dashed line below). Cause appears to be missing class.
Caused By: java.lang.ClassNotFoundException: oracle.jheadstart.controller.jsf.bean.JhsCollectionModel
Looking in jhsadfrt-11.1.1.jar, I see that the class doesn't exist.
=====================================================
Errors from run of application.
*** Using port 7101 ***
"C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\oracle\MIDDLE~3\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~3\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~3\JDK160~1.5-3\lib\tools.jar;C:\oracle\MIDDLE~3\utils\config\10.3\config-launch.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~3\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~3\modules\ORGAPA~1.0/lib/ant-all.jar;C:\oracle\MIDDLE~3\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\oracle\MIDDLE~3\patch_wls1032\profiles\default\native;C:\oracle\MIDDLE~3\patch_jdev1111\profiles\default\native;C:\oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32;C:\oracle\MIDDLE~3\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~3\modules\ORGAPA~1.0\bin;C:\oracle\MIDDLE~3\JDK160~1.5-3\jre\bin;C:\oracle\MIDDLE~3\JDK160~1.5-3\bin;C:\orant\bin;C:\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\WiFi\bin\;C:\orant\jdk\bin;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Windows Imaging\;C:\oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode)
Starting WLS with line:
C:\oracle\MIDDLE~3\JDK160~1.5-3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\oracle\MiddlewareR2\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\oracle\MIDDLE~3\WLSERV~1.3 -Dwls.home=C:\oracle\MIDDLE~3\WLSERV~1.3\server -Dweblogic.home=C:\oracle\MIDDLE~3\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1 -Dcommon.components.home=C:\oracle\MIDDLE~3\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\oracle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=\modules\oracle.ossoiap_11.1.1,\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\TOSBOR~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\oracle\MIDDLE~3\patch_wls1032\profiles\default\sysext_manifest_classpath;C:\oracle\MIDDLE~3\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Jun 3, 2010 1:14:27 PM MDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 14.0-b16 from Sun Microsystems Inc.>
<Jun 3, 2010 1:14:27 PM MDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
<Jun 3, 2010 1:14:29 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 3, 2010 1:14:29 PM MDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jun 3, 2010 1:14:29 PM MDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jun 3, 2010 1:14:29 PM MDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00031. Log messages will continue to be logged in C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Jun 3, 2010 1:14:29 PM MDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Jun 3, 2010 1:14:35 PM MDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jun 3, 2010 1:14:46 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jun 3, 2010 1:14:46 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 3, 2010 1:14:57 PM MDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jun 3, 2010 1:14:57 PM MDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00028. Log messages will continue to be logged in C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Jun 3, 2010 1:14:57 PM MDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.210.2.26:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jun 3, 2010 1:15:00 PM MDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 36845 ms.
IntegratedWebLogicServer started.
[Running application tamjhssec on Server Instance IntegratedWebLogicServer...]
[01:15:04 PM] ---- Deployment started. ----
[01:15:04 PM] Target platform is (Weblogic 10.3).
[01:15:05 PM] Retrieving existing application information
[01:15:06 PM] Running dependency analysis...
[01:15:06 PM] Deploying 2 profiles...
[01:15:11 PM] Wrote Web Application Module to C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\tamjhssec\ViewControllerWebApp.war
[01:15:12 PM] Wrote Enterprise Application Module to C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\tamjhssec
[01:15:13 PM] Deploying Application...
<Jun 3, 2010 1:15:14 PM MDT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application tamjhssec is not versioned.>
<Jun 3, 2010 1:15:23 PM MDT> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Documents and Settings\tosbor001\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\tamjhssec\ViewControllerWebApp.war. Please make sure that the annotations are valid. The error is oracle.jheadstart.controller.jsf.bean.JhsCollectionModel>
<Jun 3, 2010 1:15:24 PM MDT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1275592513661' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'tamjhssec-ViewController-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'tamjhssec-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:378)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.jheadstart.controller.jsf.bean.JhsCollectionModel
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     Truncated. see log file for complete stacktrace
>
<Jun 3, 2010 1:15:25 PM MDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'tamjhssec'.>
<Jun 3, 2010 1:15:25 PM MDT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'tamjhssec-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:378)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.jheadstart.controller.jsf.bean.JhsCollectionModel
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     Truncated. see log file for complete stacktrace
>
[01:15:26 PM] #### Deployment incomplete. ####
[01:15:26 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application tamjhssec due to error deploying to IntegratedWebLogicServer.
[Application tamjhssec stopped and undeployed from Server Instance IntegratedWebLogicServer]
Edited by: Tammy Osborn on Jun 3, 2010 1:16 PM

Tammy,
JhsCollectionModel no longer exists in release 11. It is replaced by the TableBean class.
If you generate your application with the default templates, there should be no reference to JhsCollectionModel anymore.
May be you are using a custom template that uses a managed bean that still references this class?
If you search your ViewController project for JhsCollectionModel, what entries do you find?
Steven Davelaar,
JHeadstart Team.

Problem with call error / call restart

If during a call with the Bluetooth car speakerphone on and - due to loss of signal, or anything else - I get a call error, in the lock screen there is a message of error with black color font and (!) icon, and until there is nothing strange, right? But next, if I try to unlock the iPhone the lost call restart automatically even if I would not to do it..
Is there anyone with such a problem? Any solutions?

I encounter a similar problem with 9.1.1.
My problem is link to this bug ID : CSCtq10477.
Mathieu

Problem with repair error 1311, and trouble reinstalling.

I am having problems with reader, so I tried to do a repair but got error 1311. I uninstalled not im having trouble reinstalling...

Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows

Iphone problem with itunes error 1603 on restore

I allowed my iphone battery to fully discharge and upon recharging got the error message with a large exclamation mark “please connect to itunes”. When I connected to itunes I was told that the phone was in recovery mode and needed to be reloaded. Itunes went out and downloaded the new firmware and began the install process after I approved the input screen that said it would wipe out all my data. 1/3 of the way through the process I received a message box that told me the process had failed to restore the iphone for an unknown error (number 1603).
After looking online and calling ATT as well as Apple the best solution I received was to send the iphone in for replacement (i am 5 hours from an apple store). After fiddling around I have managed to solve the problem on my own.
After trying everything else with no results, I pulled the SIM card out of the iphone and plugged the iphone into my computer. Itunes then reloaded the software and firmware successfully. I then put the SIM card back in and synced it up with itunes and it asked me to confirm the resync. Afterwards it just worked fine.
My iphone works again!

"1- suddenly my iPhone 5 lost mobile company signal and word searching appears instead but no signal for the hole day so I changed the sim with other provider and since it gave me the same result I searched the web and the seems no solution other than restore.
I did restore and update to iOS 7.0.4 but at the restore takes at the last 1% in the last moment of restore it will take loooong time then gave me error 3. And now for more than a month the iPhone stuck with recovery logo. Almost I tried every trick in the book . Change USB cable, port, PC. PC with other OS . Even freezing the iPhone as I read here noooooo result the same happened again and again."
I have exactly the same problem with my iPhone 5s!

DW CS5.5 in OSX Lion - anyone seeing problems with Spaces?

DW seems to have problems with Spaces in OSX Lion.Switching into DW from other spaces is not 'clean'. When DW comes up, sometimes the Code/Design is blank white, and windows within the workspace don't show their headers. Clicking on Code/Design redraws that window, but the only thing that seems to recover the window headings is switching to and then back from another app in the same Space.
Seems like screen redrawing triggered by switching apps within the same Space is a little different than that triggered by switching apps across Spaces.
Anyone else seeing this?

I did report it as a bug, using the link kindly provided by you and Shocker.
The two Macs I've tried this on now are a Mac Pro and an iMac, so there's no Automatic Graphics Switching option to enable/disable.
I was only able to check this out on the iMac late last night.
Hardware synopsis:
Mac Pro Early 2009
Processor 2 x 2.93 GHz Quad-Core Intel Xeon
Memory 16 GB 1066 MHz DDR3 ECC
Graphics NVIDIA GeForce GT 120 512 MB
Software Mac OS X Lion 10.7 (11A511)
The iMac isn't available to me at the moment, I'll have to fill in missing details later (can't remember the exact graphics card info):
DW is CS5, not CS5.5, was also installed well ahead of the Lion upgrade
Computer is iMac instead of Mac Pro, about 1.5 years old
Quad-Core i7
4GB memory
Mac OS X Lion 10.7
I used the same procedure upgrading to Lion on the iMac...
Ran Cocktail 'Pilot' to clean up the system prior to install (runs Daily, Weekly, Monthly maintenance scripts, clears System, User, and Internet caches, repairs disk permissions on "Macintosh HD", clears log files)
OS10.7 was purchased through the Mac App Store and installed.
JRE installed.
DW on the iMac exhibited the same problem as on the Mac Pro.
To reproduce:
Start DW, open a file for editing
Start any other app in the same Space
Open a new Space, open any other app there.
Test switching between DW and other apps in the same Space compared with switching between DW and other apps in different Spaces.
Consistently, when I switch between DW and other apps in the same Space, DW's windows/panels redraw properly,
and when I switch between DW and other apps in different Spaces, DW's windows/panels don't redraw properly.

Latest iTunes update problems with repeated error messages every 65 seconds??

After this mornings' update of iTunes. Problems with Applemobiledeviceservices.exe. Error message every 65 seconds - software exception (oxc06d007e) occurred in the application at location 0x7c812fd3.
How do I stop this?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

TS3694 what is a problem with this error (3194)

I have a problem with my iphone. I want to update my version 5.0.1 to 6.0.1 and we see this error 3194. What I need to do?

I'd start here
http://support.apple.com/kb/TS3694

Problem with ipad error 9

I'm having problems with restoring my ipad. Error 9

Have you had a look at http://support.apple.com/kb/TS1275? It suggests Error 9 is a USB issue, so you can try other USB ports, perhaps a different cable, or even trying to restore on another computer, if you have one to hand.
Hope that helps,

Problem with Imovie : error -50 when exporting

I have a problem with Imovie, I am trying to export my video but i receive a message: error -50 .
What should I do ?

I have a problem with Imovie, I am trying to export my video but i receive a message: error -50 .
What should I do ?

OSX 7 Photoshop 4, migration problems with 150:30 error

Similar Messages

Maybe you are looking for