OSX cannot boot-up after installing Security Update 2008-008
Hi Everyone.
I'm using a MacPro 2 x 2.66Ghz Dual Core Intel Xeon with 3GB RAM with Tiger 10.4.11.
After installing Security Update 2008-008, my OSX was not able to boot-up. The screen shows the Apple Logo and the spinning grey gear wheel. It stayed that way for several hours.
I finally switched it off and re-installed OSX 10.4.8 using the Start-up disk that came with my MacPro.
Now I've updated the OSX, all the software & updates EXCEPT Security Update 2008-08. My MacPro works fine now.
Was Security Update 2008-008 the cause of this problem ?
Sincerely,
Azman
Was Security Update 2008-008 the cause of this problem ?
Probably not directly. Very likely something was not quite right on your computer before the update and the update happened to exacerbate that. A number of people feel that optimizing the maintenance of your computer before doing the update and doing the update under controlled conditions minimizes problems.
There's been recent discussions as to what steps are truly necessary in doing a minimal problem update.
I think #1 to which all agree is to make sure you have a backup of your computer in case you do need to back out of it again.
Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility.
You can also go to the step of booting into safe mode to do the install.
I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
Repair permissions again afterward.
It also helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
Almost all of the above steps (except backup) have been questioned as to necessity because probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe.
Similar Messages
-
Finder(?) problem after installing security update 2008-008
I hope someone can help with this problem:
After I installed Security update 2008-008 the finder(?) has begun to behave irratically.
Whenever the mousepad is clicked, the dock slides off to the left and the click is not registered by whichever application I am in. Mostly menus are affected. I now have to click the application and menu item several times before the click is registered.
Safari is particularly badly affected with the pointer jumping around the screen when trying to copy an url (dock keeps sliding to the left), page back/forward doesn't work - url links within web pages are not recognised. Furthermore, when using yahoo mail, menus like 'send' and 'save' are not recognised.
Any suggestions how to resolve this problem would be greatly appreciated!
AndrewHI Andrew,
This is most likely caused by some 3rd part APP or kext that is now out of date.
Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then test your problem there.
Now reboot in regular mode, if the problem didn't happen in Safe Mode, but does in Regular mode, See if there is anything relevant in...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
Also look in in Your Accounts Pref Pane Login Items window. -
Help needed after installing Security Update 2008-008
Had the same problem everyone else has had. I got it back up and running using the Archive & Install procedure. Once I log in I get this error message:
"Application Transport Monitor could not be launched because of shared library error. "8<Transport Monitor><Transport Monitor><HotSyncLib.PPC>"
What do i need to do for this (reinstall a clean install of OS?)
Most of my programs work except for Itunes & Netbarrier Firewall.
Do I need to reinstall these programs.
Thanks for any help.
Merry Christmas & Happy New Year to Everyone.Hi Marty, and a warm welcome to the forums!
"Verify/Repair the HDD the Repair the Permissions." What's that?
It's important to Verify or Repair the Disk before you repair Permissions...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings. -
Macbook won't boot after installing Security Update 2008-007 (Intel)
I installed security update 2008-007 (intel) on my MacBook last night using Software Update, but now my machine won't boot at all. All I get is the gray start-up screen with the dark gray apple, but there's no spinning progress bar or anything. After 5 minutes or so, the machine auto-restarts, but again hangs on the gray start-up screen. It does this over and over again until I shut it off. I tried to boot into safe mode by holding down shift right after the chime, but it still wouldn't boot (again, not even a spinning progress bar). Can anyone please help me? I really don't want to lose my photos/movies, etc. I'll backup everything promptly if I can just get it to boot. Thanks.
Hi jared-lee, and again, a warm welcome to the forums!
First for safety, "Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
This may or may not fix the problem, but may.
Do you have another Mac around? -
Missing SENT & REPLY email msgs after installing Security Update 2006-008
I'm using Mail Version 2.1 (752/752.2) to handle my Mac.com and Comcast email traffic.
Today I realized that I cannot access/find any of my outgoing email messages sent prior to January 2, 2007. Any emails that I sent prior to that date are missing from my "SENT" mailbox(es). Also, whenever I click on the "Reply" icon next to an incoming email that I answered (prior to 1/2/07) a window pops up with the following message:
"Mail was unable to find your response to the message “(fill in the blank)”. You may have deleted the message."
I am 100% certain that I did NOT delete any of these sent messges.
Coincidentally (?) I installed Security Update 2006-008 (PowerPC) on January 2, 2007 as well. Did this update cause my sent messages to be deleted? Is anyone else having this problem? Anyone have any suggestions to recover/find my missing emails?
Thanks!I’ll be out for several ours. If Spotlight cannot find those messages, it probably means that they’ve indeed been deleted for some reason. In that case, if you don’t have a backup, your only option would be to try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage. Of these, the only one I know for sure that can currently recover deleted *.emlx files is FileSalvage. Stop using your computer right now if you want to try that, as anything you do with the computer may cause the deleted files to be overwritten.
-
Why Safari, Mail crash after installing Security Update 2008-002, v 1.1 ?
After I installed Security Update 2008-002, V1.1 Safari and E-mail crash. Any help with this issue is appreciated.
Here is what the Problem Report for Safari contains:
PROBLEM REPORT FOR SAFARI
SYSTEM CONFIGURATION TAB CONTENTS
Model: PowerMac8,1, BootROM 5.2.2f4, 1 processor, PowerPC G5 (3.0), 1.8 GHz, 512 MB
Graphics: GeForce FX 5200, GeForce FX 5200, spdisplaysagpdevice, 64 MB
Memory Module: DIMM0/J4000, 512 MB, DDR SDRAM, PC3200U-30330
Modem: Jump, V.92, Version 1.0
Bluetooth: Version 2.1.0f14, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST380013AS, 74.53 GB
Parallel ATA Device: PIONEER DVD-RW DVR-K04F
USB Device: FreeAgentDesktop, Seagate, high_speed, 500 mA
USB Device: Photosmart C7100 series, HP, high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
PROBLEM DETAILS TAB CONTENTS
Process: Safari [280]
Path: /Applications/Safari.app/Contents/MacOS/Safari
Identifier: com.apple.Safari
Version: ??? (???)
[ this information copied from system profiler/applications/safari
Version: 3.0.4
Last Modified: 10/9/07 5:26 PM
Kind: Universal
Get Info String: 3.0.4, Copyright © 2003-2007 Apple Inc.
Location: /Applications/Safari.app
Build Info: WebBrowser-55231000~1
Code Type: PPC (Native)
Parent Process: launchd [76]
Date/Time: 2008-05-06 16:15:41.653 -0600
OS Version: Mac OS X 10.5.2 (9C7010)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNPROTECTIONFAILURE at 0x00000000bf7fffe0
Crashed Thread: 0
Thread 0 Crashed:
0 libobjc.A.dylib 0x961e5150 classHash + 16
1 libobjc.A.dylib 0x961d4860 NXHashGet + 52
2 libobjc.A.dylib 0x961e54b4 lookupclass + 116
3 libobjc.A.dylib 0x961e6b0c connect_class + 116
4 libobjc.A.dylib 0x961e6b48 connect_class + 176
[same message appears in deleted lines 5 through 508 ]
509 libobjc.A.dylib 0x961e6b48 connect_class + 176
Thread 0 crashed with PPC Thread State 32:
srr0: 0x961e5150 srr1: 0x0000d030 dar: 0xbf7fffe0 dsisr: 0x42000000
r0: 0x961d4864 r1: 0xbf800030 r2: 0x002016c0 r3: 0xbf8000c8
r4: 0xbf8000c8 r5: 0x00000000 r6: 0x00000207 r7: 0x00000000
r8: 0x002fc080 r9: 0x00000000 r10: 0x961e2060 r11: 0xa0b8780c
r12: 0x961e5140 r13: 0xa0b879bc r14: 0xa0b87120 r15: 0x00000000
r16: 0x00000016 r17: 0x962b7474 r18: 0xbfffd6d8 r19: 0xa0b879bc
r20: 0x00000011 r21: 0xbfffd6c4 r22: 0xa0ba545c r23: 0xa0b8545c
r24: 0xa0b8545c r25: 0x00000001 r26: 0xbf8000c8 r27: 0x00000001
r28: 0x00201670 r29: 0x001a9000 r30: 0x917014d4 r31: 0x961e545c
cr: 0x84224412 xer: 0x20000000 lr: 0x961d4864 ctr: 0x961e5140
vrsave: 0x00000000
Binary Images:
0x1000 - 0x138ff7 com.apple.Safari 3.0.4 (5523.10) <c97d27762fb9245167f1258e6e098c97> /Applications/Safari.app/Contents/MacOS/Safari
0x17c000 - 0x18bffc SyndicationUI ??? (???) <01f9a01d0e0e0ab121be6c42c1e50093> /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
0x8fe00000 - 0x8fe30b23 dyld 96.2 (???) <39109181acbf30fed542e6c9abcf1798> /usr/lib/dyld
0x90003000 - 0x90009ffb com.apple.backup.framework 1.0 (1.0) /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup
0x9000a000 - 0x9003bfff com.apple.coreui 1.1 (61) /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x90052000 - 0x900a1ff7 libGLImage.dylib ??? (???) <1b1db85f633ad1eed75cd6645ec99a5c> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x900a2000 - 0x90616ff7 com.apple.CoreGraphics 1.351.21 (???) <44bbf8c3a4e8bc97e8b3e35737001742> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x90638000 - 0x9066dfff com.apple.AE 402.2 (402.2) <0b15a08da8ec38b74fb9dd6e579ed25f> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x9066e000 - 0x9066eff8 com.apple.Cocoa 6.5 (???) <e9a4f1c636d00893db0494c4040176ba> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x9073d000 - 0x90761ffb libGL.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x90762000 - 0x907fcff7 com.apple.ApplicationServices.ATS 3.2 (???) <4258842969dc8d4fa37e01a80aa3d409> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x907fd000 - 0x9081cfff libresolv.9.dylib ??? (???) <181fb3defd2942f00201507cfa4efdb5> /usr/lib/libresolv.9.dylib
0x9081d000 - 0x90830ffb com.apple.speech.synthesis.framework 3.6.59 (3.6.59) <7c299626d6167de473e85327699cdb9c> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x90831000 - 0x90831fff com.apple.Accelerate 1.4.2 (Accelerate 1.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x90832000 - 0x90834ffd libRadiance.dylib ??? (???) <3d70fcb7557347829c96c9753074b3f1> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x90901000 - 0x9097cfff com.apple.SearchKit 1.2.0 (1.2.0) <1b448fbae02460eae76ee1c6883f45d6> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x909e1000 - 0x90d0afe7 libLAPACK.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x90d0b000 - 0x90d70ffb com.apple.ISSupport 1.6 (34) /System/Library/PrivateFrameworks/ISSupport.framework/Versions/A/ISSupport
0x90fee000 - 0x910bdfff com.apple.ColorSync 4.5.0 (4.5.0) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x910c9000 - 0x9115fff3 com.apple.LaunchServices 286.5 (286.5) <1a1a73b91deacb172d15745ec73e5959> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x91160000 - 0x911e1fff com.apple.print.framework.PrintCore 5.5.2 (245.1) <df7cf3aa9f046c543b9e27f08860b692> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x911e2000 - 0x91769ff3 com.apple.WebCore 5523.15.1 (5523.15.1) <1b3efd86817446bdeddc4c8129c33311> /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x9176a000 - 0x91771fff com.apple.CommonPanels 1.2.4 (85) <0d1256175c5512c911ede094d767acfe> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x91772000 - 0x91837ffb com.apple.CoreData 100.1 (186) <9cf54cb19b18e53ee22edb7ababa6e6c> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x9189d000 - 0x91924ffb com.apple.audio.CoreAudio 3.1.0 (3.1) <3baa0645ba65ef3c69c975ac989b2caf> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x91925000 - 0x91966ffb libTIFF.dylib ??? (???) <0d0a3107d26786c3708e6a511d5acec9> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x91967000 - 0x919ceffb libstdc++.6.dylib ??? (???) <a4e9b10268b3ffac26d0296499b24e8e> /usr/lib/libstdc++.6.dylib
0x919cf000 - 0x919f9ff7 libssl.0.9.7.dylib ??? (???) <5dac2e94552ad76696c35bd6886f5a92> /usr/lib/libssl.0.9.7.dylib
0x919fa000 - 0x91a45ffb com.apple.Metadata 10.5.2 (398.7) <f0c3c28205af67a29a2ed728ee297648> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x91a46000 - 0x91a49fff com.apple.help 1.1 (36) <7106d6e074a3b9835ebf1e6cc6c822ce> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x91a4a000 - 0x91a4effe libGIF.dylib ??? (???) <d6e2a570359313a39c6783c2ecfee608> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x91a4f000 - 0x91bbaff9 com.apple.AddressBook.framework 4.1 (687.1) <8ba1dd324b1e390989a1d0c952d95cd7> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x91bbb000 - 0x91d04ffb com.apple.ImageIO.framework 2.0.1 (2.0.1) <ea98d04f3ecfec65edfafe3796d6d442> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x91d05000 - 0x91d12ff3 com.apple.opengl 1.5.6 (1.5.6) <4ec145eba41b94cff1322a041dfdb437> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x91d13000 - 0x922cdfff libBLAS.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x922dd000 - 0x924c0ffb com.apple.security 5.0.2 (33001) <5e841904ba22d381672679180d4b0f4a> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x924c1000 - 0x924feffe com.apple.securityfoundation 3.0 (32989) <ad2dd4c797fa2ba4c656f82936f9fb83> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x92529000 - 0x92542fff com.apple.CoreVideo 1.5.0 (1.5.0) <addd6360b7be4dae18a0a5e2bfa98740> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x92593000 - 0x92595fff com.apple.CrashReporterSupport 10.5.0 (156) <80ad9e5e406c33f861fba5a238bbf8fe> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x92596000 - 0x925cefff com.apple.SystemConfiguration 1.9.1 (1.9.1) <50bc5b4d50a2e1f7743e729381467537> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x925cf000 - 0x925cffff com.apple.Carbon 136 (136) <f8fdb172887f2d6a374aed2d2a13b319> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x931a5000 - 0x932b3ffb com.apple.PubSub 1.0.2 (59) /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub
0x933f8000 - 0x9344efff libGLU.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x9344f000 - 0x93452ffb com.apple.securityhi 3.0 (30817) <ad843393cafb2193fd716df88d8136bf> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x93453000 - 0x9346effb libPng.dylib ??? (???) <c51ec88c87a3f0a646471165e16acd43> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x9346f000 - 0x93541fff com.apple.CoreServices.OSServices 224.4 (224.4) <1972b141810adcc01c30c31fcbab5af3> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x93542000 - 0x93786ffb com.apple.Foundation 6.5.4 (677.15) <0cb0eec2a47f915404236f64abf7c384> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x9378e000 - 0x93841ffb com.apple.JavaScriptCore 5523.10.3 (5523.10.3) <11a3413a91cb500bbd65b8620295005a> /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x9385e000 - 0x93972ffa com.apple.vImage 3.0 (3.0) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x9397f000 - 0x93aa4ffb com.apple.CoreFoundation 6.5.1 (476.10) <e71eaa358523eae0e45280bca8a90e98> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x93ae9000 - 0x93af0ffb com.apple.print.framework.Print 218.0.2 (220.1) <c7e0e618d5867ae227403ae385aacd82> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x93af1000 - 0x93b8afc3 libvDSP.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x93b8b000 - 0x93ba2ffb com.apple.ImageCapture 4.0 (5.0.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x93ba3000 - 0x93ba4fff libffi.dylib ??? (???) <11b77dbce4aa0f0b66d40014230abd1d> /usr/lib/libffi.dylib
0x93d59000 - 0x93d69fff libsasl2.2.dylib ??? (???) <18935d5e775962f4728b91189b092d45> /usr/lib/libsasl2.2.dylib
0x93d6a000 - 0x93d6fff6 libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x93d70000 - 0x93d9bff7 libauto.dylib ??? (???) <b3a3a4b0f09653bd6d58f1847922b533> /usr/lib/libauto.dylib
0x93ddd000 - 0x93e8dfff com.apple.QD 3.11.52 (???) <f33191c288897dd4d2e2c4b87bcc09b4> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x93e8e000 - 0x93e9cfff libz.1.dylib ??? (???) <1a70dd3594a8c5ad39d785af5da23237> /usr/lib/libz.1.dylib
0x93e9d000 - 0x93ebdff7 libJPEG.dylib ??? (???) <92341083256fbcd28888a179ebf941ef> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x94373000 - 0x946d0ff2 com.apple.QuartzCore 1.5.1 (1.5.1) <f364682e96d58c5849cad532f6bf2f91> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x946d7000 - 0x946e2ffb libgcc_s.1.dylib ??? (???) <ea47fd375407f162c76d14d64ba246cd> /usr/lib/libgcc_s.1.dylib
0x946e3000 - 0x94743fff com.apple.CoreText 2.0.1 (???) <2ecbcac842c4864bdd3de0a68e4d2f2c> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x94744000 - 0x947a0ffb com.apple.HIServices 1.7.0 (???) <48d200891cc9dd795ee547d526c6a45b> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x947a1000 - 0x94834fff com.apple.framework.IOKit 1.5.1 (???) <590e7f24d3cbfc072c8659173d2141e3> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x94843000 - 0x94878ffb com.apple.LDAPFramework 1.4.3 (106) <d9a3a16b2d468683b68f714d11196d7b> /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x94879000 - 0x94888fff com.apple.DSObjCWrappers.Framework 1.2.1 (1.2.1) <651e2b4d7e19d43f520829f76216f2c2> /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
0x9488f000 - 0x94917fff com.apple.ink.framework 101.3 (86) <66a99ad6bc695390a66dd24789e23dcc> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x94ad8000 - 0x94f0dffa libGLProgrammability.dylib ??? (???) <6d71574167a838789ab0ee27f92af626> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x94f0e000 - 0x94f29ff3 com.apple.DirectoryService.Framework 3.5.1 (3.5.1) <0bd4cfb69d5de8ecff3c61e32837fdf0> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x94f2a000 - 0x94f3dfff com.apple.LangAnalysis 1.6.4 (1.6.4) <c184bb5b2859e82c5740a6fdb1e3d0bc> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x94f3e000 - 0x95277ff3 com.apple.HIToolbox 1.5.2 (???) <687d476c6a3809efaba68bc11dc894c1> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x95279000 - 0x95329fff edu.mit.Kerberos 6.0.12 (6.0.12) <9a85ee3fd8fb95d4537725b035297fe7> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x9532a000 - 0x953a4ffd com.apple.CFNetwork 221.5 (221.5) <ef2672379d6fcb1470dc9361ce68e7f7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x953a5000 - 0x953e3ff7 libtidy.A.dylib ??? (???) <5ed7eaf2c53383f5bf92fa2b8cd9d16d> /usr/lib/libtidy.A.dylib
0x953e4000 - 0x95469fff libsqlite3.0.dylib ??? (???) <f2a33fe2663eab9c7f4806d2cf05b4ee> /usr/lib/libsqlite3.0.dylib
0x9546a000 - 0x95473fff com.apple.DiskArbitration 2.2.1 (2.2.1) <a389b4c2badce39540f24402f7df35e7> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x95474000 - 0x954bbfff com.apple.NavigationServices 3.5.1 (161) <b245f17b2b2902e1f9eeaaa6773f8126> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x954eb000 - 0x95c60fff com.apple.AppKit 6.5.2 (949.26) <8d6ce96921254cbc787b9fe0526bef42> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x95c61000 - 0x95c87fff libcups.2.dylib ??? (???) <d60807e6cfdc208c2e5520f7acb473f6> /usr/lib/libcups.2.dylib
0x95c88000 - 0x95d47ff9 com.apple.WebKit 5523.15.1 (5523.15.1) <04de744f6edfbff2e6b8fb0412d80fa6> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x95e72000 - 0x95f01ffb com.apple.DesktopServices 1.4.5 (1.4.5) <b6bd34467a57cc899612152caac2a789> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x95f35000 - 0x95f5cfff libxslt.1.dylib ??? (???) <3700d04090629deddb436aa2d516c56d> /usr/lib/libxslt.1.dylib
0x95f5d000 - 0x96046fff libxml2.2.dylib ??? (???) <6f383df1e1e775be0158ba947784ae13> /usr/lib/libxml2.2.dylib
0x96047000 - 0x96047ffb com.apple.installserver.framework 1.0 (8) /System/Library/PrivateFrameworks/InstallServer.framework/Versions/A/InstallSer ver
0x9608b000 - 0x960aafff com.apple.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x960f6000 - 0x96101fff com.apple.speech.recognition.framework 3.7.24 (3.7.24) <ae3dc890a43a9269388301f6b59d3091> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x96102000 - 0x96164ffb com.apple.htmlrendering 68 (1.1.3) <e852db1c007de975fae2f0c2769c88ef> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x96165000 - 0x961abff9 com.apple.securityinterface 3.0 (32532) <82a438eff282dd1dc1f803dfd91b5f38> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x961bd000 - 0x961c5fff libbsm.dylib ??? (???) <c1fca3cbe3b1c21e9b31bc89b920f34c> /usr/lib/libbsm.dylib
0x961c6000 - 0x961d2ff3 com.apple.audio.SoundManager 3.9.2 (3.9.2) <79588842bcaf6c747a95b2120304397a> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x961d3000 - 0x962b6feb libobjc.A.dylib ??? (???) <23a407d7dac6090562827e97bac3cb86> /usr/lib/libobjc.A.dylib
0x962b7000 - 0x965b8ff7 com.apple.CoreServices.CarbonCore 785.8 (785.8) <d56076bc0fe62dd58002bdd581a3f3c0> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x965b9000 - 0x965d8fff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x965d9000 - 0x96721ff3 libicucore.A.dylib ??? (???) <250daed2fb2e6bf114480e2e4da0728b> /usr/lib/libicucore.A.dylib
0x96748000 - 0x968e1fe3 libSystem.B.dylib ??? (???) <754231f5e52ed8418f89f1f3369caf58> /usr/lib/libSystem.B.dylib
0x968e2000 - 0x968e3ff8 com.apple.ApplicationServices 34 (34) <6aa5ee485bb2e656531b3505932b845f> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x968e4000 - 0x968e4ffa com.apple.CoreServices 32 (32) <42b6dda539f7411606187335d9eae0c5> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x968e5000 - 0x968e5fff com.apple.audio.units.AudioUnit 1.5 (1.5) /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x968e6000 - 0x968feffb com.apple.DictionaryServices 1.0.0 (1.0.0) <fe37191e732eeb66189185cd000a210b> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x968ff000 - 0x96989fff libvMisc.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x9698a000 - 0x96aa8ff7 com.apple.audio.toolbox.AudioToolbox 1.5.1 (1.5.1) /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x96aa9000 - 0x96b63fff libcrypto.0.9.7.dylib ??? (???) <4ea3d7e9a1c28ac7b17ed80873fe6598> /usr/lib/libcrypto.0.9.7.dylib
0x96b64000 - 0x96b7fffb com.apple.openscripting 1.2.6 (???) <12270fbb14905644f78975f227328a98> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0xfffec000 - 0xfffeffff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff8000 - 0xffff9703 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylibThanks for the help -
-
After installing security update 2008-007
I installed security update 2008-007 yesterday and now several applications refuse to open: adobe acrobat, itunes, and the image capture application for my HP scanner/printer, so far have "closed unexpectedly immediately upon opening. This is my first entry on a discussion board, so let me know if there's a better way to get some good advice
Hi finnst, and a warm welcome to the forums!
You're doing great for a first post!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes. -
Installed Security update 2008-008 ; programs won't work
Hello,
I installed the latest security update, 2008-008, last night on my Macbook Pro version 10.4.11. Now, the majority of programs on my machine quit unexpectedly right when I try and start them up.
iTunes, iCal, VLC media player, Photoshop, Installer, internet connect, activity monitor, directory access... the list goes on.
How do I fix this?
Thanks!Two things seem to be ultimate solutions for Security Update 2008-008 problems from what I have read.
One is Archive and Install which will replace the corrupted system but then requires you reapply all your updates. Select the keep settings and preferences when doing A&I. Make sure you select that option when doing A&I if you want settings and preferences kept. Some third party applications may need reinstalling if they have special components.
[Mac OS X: About the Archive and Install feature|http://support.apple.com/kb/HT1710?viewlocale=en_US]
[X-Lab Archive and install|http://www.thexlab.com/faqs/archiveinstall.html]
[Kappy's A&I instructions|http://discussions.apple.com/thread.jspa?threadID=1823034&tstart=0 ]
[How to get files from a previous home directory after Archive and Install|http://docs.info.apple.com/article.html?artnum=107297]
The other is to try to re-install the security update on the main drive while booted from a secondary drive or in Single User Mode. This could be from another Mac computer while your first one is in Target Disk Mode, perhaps a bootable backup drive, or possibly from your installer disc. Here's references for those methods:
http://discussions.apple.com/message.jspa?messageID=8728797#8728797
http://discussions.apple.com/message.jspa?messageID=8733921#8733921
http://discussions.apple.com/thread.jspa?messageID=8634535#8634535
Updating
There's been recent discussions as to what steps are truly necessary in doing a minimal problem update.
I think #1 to which all agree is to make sure you have a backup of your computer in case you do need to back out of it again.
Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk. Permissions repair can, and is probably best done, when booted from your internal drive.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
Using Disk Utility in Mac OS X 10.4.3 or later
Disk Utility's Repair Disk Permissions
You can also go to the step of booting into safe mode to do the install.
Mac OS X: Starting up in Safe Mode
What is Safe Boot, Safe Mode? (Mac OS X)
Safe Boot takes longer than normal startup
I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
Repair permissions again afterward.
It also helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
Almost all of the above steps (except backup) have been questioned as to necessity because probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe.
Finally, you could try re-applying the combo updater for 10.4.11, then re-apply the security update carefully. Since it seems to be applications (but not just Apple ones) that are having problems it may be some component used in all of these is broken.
The 10.4.11 combo update links for [PowerPC-based Macs|http://www.apple.com/support/downloads/macosx10411comboupdateppc.html] and [Intel Macs|http://www.apple.com/support/downloads/macosx10411comboupdateintel.html].
Message was edited by: Limnos -
Something happened after install security update 2008-006(PPC)
Hi there,
I have just installed the security update 2008-006(ppc) for my old powerbook, G4 1.5Mhz. Now every time when i go to network in the system preferences, i immediately got this message "Your network setting have been changed by another application" No matter how many "OK" i clicked, this message will kept appeared. I tried to restart my powerbook, but the powerbook responded that the system preferences have cancelled the restart. Can only force quit the system preferences. I can still connect to the network, just that if i go to any new places with new network setting, i will not be able to change the network setup in my powerbook.
Before i install the upgrade patch, this never happened, so i am assuming it was because of the patch. Can anyone help me? thanks.This seems to work also...
http://discussions.apple.com/thread.jspa?messageID=8164180� -
Lost a new mailbox after installing Security update 2008-03- 10.4.11
I was organizing my mail, created a new Mailbox in the Saved Folder and moved a lot of mail to it. Then I saw that there was a Security update available so I closed all apps and applied the security update 2008-03. Now in Mail, the new mailbox and its contents are gone. Help ?!?
Couldn't find it in my Library so I'm guessing rebuilding an index won't accomplish much. Could I have tripped myself up with the name I used? I called it .MDance and had created it, I thought, in Saved, so that it would be at the top of the list. None of my other mailboxes are named that way. It's a naming scheme I've used in Windows (ugh), but it worked to keep a current, important folder at the top of a list.
And, yes, I know better than to apply OS changes without a backup. So fooey on me. Luckily the messages I lost aren't completely critical. Many are still out on Bellsouth so I can 'recover' that way.
I'll be more careful about backups, I just have been so happy with Mac that I got lazy.
Thanks for the suggestion. -
Problems after installing Security Update 2008-02
I have a PPC G4 (1.65GHz/512 MB RAM), patched to 10.4.11. Before running the 2008-02 patch yesterday, I cloned my system to an external drive, ran Onyx (run all maintenance scripts/delete caches/repair permissions). I also uninstalled Miro 1.1 (intending to do a clean install of 1.2) and uninstalled Flash (intending a reinstall). I turned off ClamXAV/Clam Sentry. Updated using Software Update. Process seemed to go smoothly. After it completed, I shut the system down, waited a few minutes, then powered back up. System seemed fine.
Doubleclicking on the flash install dmg gave me the following error:
The following disk images failed to mount
Reason: No child processes.
I got the same message trying to install Miro.
Thinking the images were corrupted. I re-downloaded them on a PC, tranferring them via flash drive. Same error. Thinking perhaps the flash drive was corrupted, I tried again with a different flash drive. Same error.
I downloaded the standalone file, thinking to rerun it. Same error.
Logged in via safe mode. Same error.
Reran onyx. Shut down. Same error.
Trying logging in under a different admin profile. It did not recognize the password. I logged back in under my normal admin profile; reset the password on the backup admin profile. Still unable to log in. Back again and created a new backup admin profile. Tried running the Miro dmg under that; same error.
Can the security update be uninstalled? That or any other suggestions greatly appreciated.
TIA,
shnSorry for the delay in replying -- I had put the install disks in a safe place -- so safe that it took me a while to find them <g>.
Booted off the install disks and ran repair permissions (there were a few, most involving changes from read-only to execute). Verified the disk. Rebooted.
Problem not solved.
Shut down. Did a few chores <g>.
On restart, I got a message that the system had encountered a problem & I needed to shut down. Powered down. Waited a couple of minutes before powering up (successfully). Thinking that, given the permissions repair, I should rerun the the update manually, I tried rerunning the patch. Same error message.
Shut down & waited a couple of minutes before rebooting into safe mode in backup admin profile. tried rerunning the security patch manually. Same error message.
Further suggestions would be most gratefully accepted...
shn -
Problem with Entourage after installing Security Update 2008-005
Since installing the update I can no longer access the mail on my server using its required SSL settings in Entourage 2008. I can use Mail without problem, and I can access mail from my other servers (which don't require secure settings).
Any advice?
Thanks,
MadelineHello, i have the same problem. After security update the Mailprogram is polling my imap accounts (which requires SSL) endless. My workarround was to install Thunderbird. TB did the job. Any solution?
thh001 -
FCE 3.5 wouldn't open after installing Security Update 2008-007
Installed the update from Software Update like a good little girl, then couldn't open FCE, which is my main reason for owning the Mac. Don't remember the details. After it dawned on me that the update or my simpleminded approach to installing it was probably the cause of the malfunction, I rebooted from my Carbon Copy Clone, first time ever for real. After everything was demonstrably back to what passes for normal, I sent CCC another $25 to celebrate!
Now I have checked for updates and SU 2008-007 is still sitting there but I am afraid to try it again. How was I supposed to know about doing disc repairs and god knows what-all else before & after? And what else don't I know that will skunk me? Looks like there have been a number of problems on this forum traceable to SU 2008-007. Kind of like dear old Service Pack 2 on the PC...
What's the downside of NEVER installing the update? Or can somebody clarify for me how to do it safely?
Thanks,
SharronHi Sharronuss,
Let me give you my full method...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing. -
Security Update 2008-008 knocks out router
Since installing security update 2008-008 on two computers (MacBook Pro and Power Mac G5, both running OS 10.4.11) earlier this week, my router (Belkin Wireless G model F5D7230-4) no longer connects me to the internet. I also found that my Network preferences had been unlocked and "changed by another application" (or some similar message). It was extremely difficult to get past this message in order to make any changes to these preferences. I was finally able to be quick enough to click on OK on the message and then on Assist Me before the next identical message window returned. From there I could lock Network Preferences. But nothing looks off in the configurations.
Any ideas on getting my router connected again?Hi CecG, and a warm welcome to the forums!
To stop the pop-up, Go to System Preferences: Security. Check the box next to "Require password to unlock each secure system preference." Then lock Security.
Try this cure for Security update...
http://discussions.apple.com/thread.jspa?threadID=1730909&tstart=0
Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Airport Interface...
208.67.222.222
208.67.220.220
Then Apply -
Applications crashing after installing security update 2010-003
Hi all, anyone else having this problem (and found a solution)? After installing security update 2010-003 on snow 10.6.3, entourage, firefox, and even itunes are crashing at launch. Safari seems stable, but haven't tried other apps yet. Verified permissions on my boot disk and repaired it but the problem persists. It started after rebooting after installing the security update. I'll reinstall the OS if needed but hoping this is a bug someone has solved. Thanks!
http://www.thexlab.com/faqs/multipleappsquit.html
Maybe you are looking for
-
Need to display invoice amounts under each aging period (columns dynamic)
Hi All i'm developing Aging Report but i'm missing how to get the idea that i show the aging period(period_sequence_number)dynamically & show the invoice amount under its corresponding period As for example Vendor No Vendor Name Invoice No
-
How do I transfer pictures and videos on to computer
Have all on Micro SD card, but computer won't read it. Used card reader as well as other computers, didn't work.
-
Hello all. I've posted for help on this exact same program before, but I'm just having a heck of a time with this. Basically, the output should look sometime like this: Name Item Value No.Sold Amount Joe 1 $2.00 2 $4.00 2 $3.00 2 $6.00 Total Amount:
-
How do you title/retitle pictures in iphoto ?
Hi there I have the already installed iphoto 5 (not used to it as I am a 'newbie' to MAC !!) When I down load my pics direct from camera to iphoto and then want to title them (or retitle), I can't find how to do this !!! I know there has got to be an
-
Why does music on my mac not play on iTunes instead just show as being grey or faded lettering and why is it that they work sometime and not others?