OSX forgets window placement

Hi,
I am sure this has been asked before but I didn't see an answer in searching for it so I'll ask.
OSX has forgotten where I put Finder windows. I'll move a window, close it, then open it again and it will be where it was before I moved it. Lately, they tend to have one edge on either the right-hand or left-hand side of the screen. For what it's worth, most of my Finder windows are List views.(And I wish that was the default for new Finder windows... but I have never been able to make that happen.) I am using 1024x768 (stretched) resolution.
I assume there is a plist file I should trash. Which one?
Thanks.
John L

Matthew,
Welcome to Apple Discussions. The phenominon you describe is a bug, and you should use the feedback link at the top of the page to tell Apple that fixing it is important to you. You ask if it'll be fixed in the future: we can't possibly know that since Apple is particularly tight-lipped about updates. But if enough people bring it to their attention, they will likely make fixing the problem you cite a priority.

Similar Messages

Partition Table Looks Different Between OSX and Windows 7

Hey all,
I recently replaced the hard drive on my 2007 iMac, going from the 320GB drive to a 1 TB drive. It actually worked! The previous drive was failing in very odd ways, though booting into the Windows side (more on dual boot later) always seemed to work, and S.M.A.R.T. always reported that the physical drive seemed OK.
The previous drive (320 GB) had around 200GB devoted to OSX and 100GB partitioned off for a working Windows 7 installation (custom installed x64 Win7 Ultimate). I had the Windows system image backed up to my NAS, and had a Windows system bootable disc to restore that image.
After replacing the drive (and almost crying that I had actually done it right), I first restored OSX from a Time Machine backup, and let it take the full 1TB of space as Journalled HFS+. Then, I used Disk Utility to shrink OSX down to 500GB, and created a second partition (formatted to NTFS) with the remaining 500GB.
Now, restoring a Windows system image is an odd thing, as it tries to do a lot of partition work as opposed to simply restoring the Windows install to a partition. I tried Macrium Reflect first (made a backup in that, too), and it looked like it was going to let me restore to the second partition. It completed the restore...and the entire hard drive was hosed. Partitions had been moved, renamed, resized, and nothing was bootable. I had to use Recovery from an external USB thumb drive to go back to the single, full-drive install of OSX.
Then I tried again. Made the second NTFS partition and used the basic Windows System Restore disk to restore from the standard system image I had on the NAS. I was not expecting this to work. But it did. Windows started showing up in Startup Manager when "option" was pressed on bootup, and both OSX and Windows booted properly and ran fine. This is where I (finally) get to the supreme oddities:
OSX Disk Utility still reports two 500GB partitions, one for OSX and one for Windows.
In OSX the Windows partition shows as having NO DATA on it. Not sure what would happen if I tried to write a file to it when mounted, but there is no data on it when viewed from OSX (I was always able to see the Windows files when I mounted that partition on the previous drive).
The Windows partition does not show up as a valid bootable system in System Prefs --> Startup Disk (naturally, I suppose, since OSX doesn't think there is anything there).
From the WINDOWS side, Windows still sees the old partition table: 200GB for the "unknown" HFS partition, and then the rest of the space can be devoted to Windows (started as 100GB, but I was ablt to expand it to use the remaining ~750GB!). Windows thinks it can have 750GB of space even though I know its partition is only 500GB in size!
Windows cannot see the OSX HFS partition data using HFSExplorer. It CAN see the HFS partition on the attached backup drive (the drive I use for Time Machine).
GParted (a partition program on a Linux bootabld CD-ROM) shows the same partitions as OSX Disk Utility (2x500GB), and also thinks the Windows NTFS partition is empty (all space reports as "unused").
Did I mention both OSX and Windows work fine???
There are, of course, two other partitions on the drive: the first partition is the 200MB one I always see (EFI/GUID portion?), and then between the HFS and NTFS partitions is the 600MB recovery partition (which also shows at option-pressed boot time). OSX, GParted, and Windows see all four partitions, and in the same order. It is just that Windows sees the wrong sizes, and OSX cannot see any data in the Windows partition.
Surely this is all going to break spectacularly at some point, isn't it? What if I ever did write a file to the Windows side from OSX, or what if OSX starts taking more space than the 200GB Windows thinks is the max for that partition? What if I try to make Windows use more than 500GB because it thinks it has almost 800GB to use? What if I defrag the Windows drive?
I had no idea a partition table could look this goofy and yet still have everything be bootable and workable. Is there something I can do to get everything in sync? Basically, I am assuming I need to get Windows to do some low-level kung fu in Disk Manager in order to properly get everything lined up with the "right" partitions as reported by both GParted and OSX Disk Utility. But how do I do that?
By the way, any ideas that totally nuke the drive and start from scratch are completely fine (if it seems like they are doing something different enough that I'd give it a try). I have good backups of both OSX and Windows and have restored them about a half dozen times already as I dealt with the previous failing hard drive and with trying to get dual-boot working again. Not to mention, this iMac is now my secondary machine to the new Mac Mini I got a couple weeks back when I wasn't sure how much more life I was going to get from this 6+ year old iMac.
Thanks for listening to me ramble about this very odd issue, and a huge THANK YOU in advance to anyone who has ideas to help.
Thanks,
sutekh138

Update:
I am pretty sure the issue is a simple GPT/MBR discrepancy.
I installed rEFIt and used it's partitioning tool (gptsync built in) upon bootup. It was able to show the GPT table and the MBR table, but it thinks the second partition of the drive (the Mac OSX bootable partition) is "extended" in the MBR table and says "will not touch this disk."
However, it does look like an MBR sync should be straightforward, as there four partitions in the GPT table and four in the MBR (and MBR allows a max of four, AFAIK). I just need gptsync to relax some rules. I found a link to a supposedly newer version of gptsync compiled for OSX, so I will try that later.
First, I will try Partition Wizard, a free tool I found for the Windows side. It has a "Repair MBR" option that I would have tried last night if I weren't running a new Windows Image Backup in case all of this goes haywire. *smile* The PW tool also has an option to change the MBR over to GPT entirely. That might work, but then I am not sure Windows 7 will boot (from what I read, x64 Win7 running on EFI-enabled hardware should work, but who knows).
Anyway, I will try the following things, in order, until something works, when I get home tonight:
From Windows, run Partition Wizard and try "Repair MBR".
From OSX, download recent gptsync and try to run it.
From Windows, use Partition Wizard to do a full MBR --> GPT conversion.
Nuke the Windows partition in OSX Disk Utility, expand the HFS partition to take up the whole drive, and then add a Windows-bootable partition via Boot Camp-ish command line commands (diskutil). Because if nothing else works, I have to assume I just created the partitions wrong in the first place such that a Windows restore miraculously works, but the partition weirdness is just a timebomb waiting to happen.
Finally, if none of the above work, I'll just get things back to the way they now work and wait for the timebomb to (possibly never) go off. *smile*
I'll update this thread if I get something figured out, in case anyone else stumbles upon it...
Thanks,
sutekh138

Can not reboot into OSX from Windows using Bootcamp assistant

I'm having a bit of a problem with rebooting into OSX from Windows on bootcamp. Clicking on the icon in the system tray produces a message that Windows can not find the OSX disk. Trying to open the Bootcamp preferences also generates an error. I have no problem getting back into OSX if I shut down Windows and restart the MacPro while holding down the option key. This is with a Windows 7 install on Bootcamp, but I had the same issue with a previous install of Win XP. I nuked and paved OSX and the WIndows disk between installs so my current problem is not carry over from the XP install.

My bad I should have been more clear. The problem is actually with a XP install via bootcamp, my Win 7 install is in VM Ware Fusion.
The XP install is on a second drive. Since you asked about this I'm assuming it may be the reason Im having problems.
The error is I get when trying to access bootcamp via the Windows control panel or by right clicking the sys tray icon is - "An error occured while trying to access the start up disk settings. You may not have privileges ...blah, blah, blah. I only created one account and I have enough privliges to change admin stuff in windows so I cant see privliges being the issue. I reassigned the OSX partition a new drive letter and rebooted windows but this didn't help.
The only drivers I installed, other then updating the video driver, are the bootcamp drivers
Sys tray icon - small diamond shapped icon in systray for accessing bootcamp functions.

Webcam for OSX and Windows

Hi, I would like to buy a webcam that can work on OSX and Windows XP as I have two computers but only want to buy one webcam. Can anybody recommend a webcam that works on both operating systems?
Thanks.
6400 (7.5), G4 PB (10.3.x), MM (10.4.x), 15GB pod, and then some! Mac OS X (10.3.9)

I recently bought an Ezonics 1Contact Pro which works with both systems.

Viewing PDF in OSX vs Windows

Hey...
I've looked through the discussions, I've searched Google and Adobe...but am finding no answers.
I create newsletters in Pages...I export as PDF. It looks great and all formatting consistent when I open via Preview.
But when I use Adobe Reader to view it (in OSX or Windows)...it loses some formatting. ie..text turns white, arrows are white (when should be black).
I've tried not to overlap anything...text boxes with arrows or pics with other things...(as much as I hate everything floating alone).
Any thoughts would be great!
Thanks,

Are you using attributes like shadows ?
We explained here many times that Pages uses several system's features to display several things.
The result is that these things aren't passed to the other world.
It's explained by Apple in:
http://support.apple.com/kb/TA23140?viewlocale=en_US
Yvan KOENIG (VALLAURIS, France) vendredi 26 mars 2010 21:09:53

Second display refresh rate lower in Mac OSX than Windows

I use a Mitsubishi Diamond Pro 2070SB CRT monitor connected to my MacBok via a miniDVI to VGA adapter; I span the desktop on both monitors (i.e. I do not use the Mirror Displays option). I use this configuration in both Mac OSX and Windows (via bootcamp). On Windows, I can set the refreesh rate of my CRT monitor to 75 Hz at 1600x1200, but I am stuck to 60 Hz on Mac OSX at 1600x1200. To get a more respectable refresh rate on my CRT, I need to lower the resolution to 1400x1050.
Obviously, the video card of the MacBook can handle a second display at 1600x1200 at 75 Hz since I can do that on Windows. Any ideas how to get the same result on Mac OSX?

Either DisplayConfigX or SwitchRes X should be able to remedy this. But I am at a loss to explain why OS X would itself not allow for the 75Hz choice.

Can both OSX and Windows versions be downloaded?

I understand Adobe permits a user to download 2 versions of LR per purchase, as you might do for a Desktop and Laptop computers. However, I can't find whether it must be the same operating system version for each copy.
When I originally bought LR 3, you had to select OSX or Windows version prior to purchasing but now the download selection is offered after the purchase when I recently upgraded to LR 5.
So, can I download one version for OSX & one for Windows 7? Will they play well together if the photos & catalogue are on a portable HD, shared between a laptop & desktop of different OS's?
Thanks.

Thanks 1.JimHess.
I've downloaded and installed it on the Windows 7 machine. However, a portable drive that I have used with the Mac is not recognized by Win 7, which I presume is a formatting incompatibility between the OS's. This may be the limiting issue that precludes use across platforms when using a shared portable drive. (the drive is formatted as Mac OS Extended (Journaled))
Any suggestions of different formatting that could be cross compatible?
This may turn out to be more trouble than it's worth. Best to stay within one ecosystem, I suspect!

Replace osx with window

Could I replace osx with window in a Mac mini with Fusion drive?

you can have both and have it always default startup into windows
100% removing osx is a bit more work which one have to be a bit into changing and deleting partitions to get working

Formating the Mobile Me gallery window place holder

Is there a way to format the Mobile Me gallery window place holders? Specifically, remove the white title bar at the bottom of the window when they appear in the published site?
I would like to ad these galleries but I don't want the title at the bottom to show up. I don't want to use the album style picture placeholders because I want to be able to email the pics.

Is it the tell a friend email link that you're referring to? Can you click on the gallery link in iPhoto and get to it online? The link will contain numbers as the folder for the gallery is identified by a 6 digit number.
If it's the link in the email that gets created by the tell a friend that you're referring to you might post in the Mail forum also.
All I can think to do is go to iPhoto/Gallery preference pane and stop publishing. Then republish and see if you can get the email link to work.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Data Doubler - Format for both OSX and Windows 7 to read/write?

Hello! I have a Mid-2012 MacBook Pro 13" and I've ordered the OWC Data Doubler with a 1.5TB HDD to put into the optical bay. I have a couple of questions.
1. What format should I use for the HDD to allow both my OSX and Windows 7 sides read and write to it? I have a Bootcamp partition, but if it's possible I'd like for both OSX and W7 to be able to read and write to this drive. That way, when I'm in OSX I can view iTunes and media, but if I'm in W7 I can still have the same access. That way, I don't have to worry about "Oh, I downloaded this on the windows side ... I have to figure out how to get it over to the mac side" (or vice versa). Essentially allowing the 1.5TB HDD to be a "go between" for the two.
2. This is a minor question, but will the eject button do something to the HDD if it gets pressed when the optical drive is out and the HDD/Data Doubler is in? I don't plan on pressing it, but I was wondering if I need to dig into terminal (or somewhere else) to "disable" the button or maybe just reassign it so that instead of ejecting it does some other function?
I have heard of "MacDrives" for Windows, but I haven't used it. If this is a better option (to put the HDD into Mac OS Extended Journaled and use an application to allow W7 to read/write) that's fine.
I am putting in the 1.5TB HDD. The end goal, if possible, is to allow the Windows 7 side to read/write to it. As long as it's not a "hacked together" method, I do not mind what way it's done.
Any thoughts? I appreciate it!

Use Winclone for the Windows partition and CCC for the OSX partition.

Window placement

I wonder if I am missing something. Pages always opens documents based on templates 1/3 inch from the left edge of the screen. It never remembers the window placement on templates. Is there a method for changing this? I want my default documents to open in a specific position. If not, will this be fixed in the future? Nisus, Mellel, Mariner Write all do this well. I would prefer not to have to take an extra step before working on a new document in pages.

Matthew,
Welcome to Apple Discussions. The phenominon you describe is a bug, and you should use the feedback link at the top of the page to tell Apple that fixing it is important to you. You ask if it'll be fixed in the future: we can't possibly know that since Apple is particularly tight-lipped about updates. But if enough people bring it to their attention, they will likely make fixing the problem you cite a priority.

Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel. Please Help.

Hello,
I'm currently in mac recovery. I have a 21.5'' iMac (I think late 2011). I'm running OSX mountain lion and I think its kept up to date. Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel (not the beachball one). This seems to go on for ever (at least 3 hours) ant will not boot. Booting in safe mode does not work and results in the same problem. As I said earlier I can get tom recovery mode. Thanks Oliver.
I have on/for my machine:
Mac OSX mountain lion
Windows 7 Pro 64bit
4GB of ram
OSX 10 FULL backups (External 2TB drive)
500GB HDD
Please ask if you would like more Information.

Hello, disconnect any external drives for now.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Wireless suddenly doesn't work, both in OSX and windows 7

I have got a new model of MacBook Pro 13-inch. Everything work fine until one day I found the wireless suddenly didn't work, both in OSX and windows 7(boot camp.)
I tried my USB-wireless adapter on macbook, it works fine.
In bootcamped windows 7, I have uninstalled and re-install the wireless adapter, still doesn't work.
Actually it can find the wireless networks but cannot join them.
I need to mention before then I kept play heavy games like starcraft2 frequently, and macbook got so hot during playing, so maybe the wireless module was damaged by heat somehow??
Seeking for help ~~~
Message was edited by: demax
Message was edited by: demax

Seems I'm pretty annoying but I need to post again because I found something interesting: once I plug my external monitor to the macbook, the wireless strikes, and once I plug out the monitor, wireless recovers... Anyone has any idea?
Message was edited by: demax

Change "Test Window" placement in Flash CC?

Hi.
I have a problem with the placement of the Test/preview/export windows placement in Flash CC on my dual-screen setup.
When pressing CMD+Enter, the test window pops up at the edge between my laptop screen and my external display. Every time i have to drag the window into my external display in order to preview it properly. In Flash CS6, i would move the test window once and the next time i exported out the test window would wind up in the same position as it did earlier.
Please fix this ASAP, its very annoying

Hi Dharmendra.
Thank you for taking your time to reply this thread.
I havent even considdered the possibility of this being affected by the flash project itself, i thought it was some kind of error in the UI. But when you asked about my settings and classes, i started looking around for clues.
And i - sort of - found a solution. At least a half one, but that is more than okay for now.
The bug seems to revolve around the use of traces. We use quite a number of trace calls in our projects, and it seems that when i ignore these by enabling the "omit trace statements" option in the Publish settings, the issue goes away and the flash test windows position is being correctly saved again. Disabling "omit trace statements" will force the test window back to its original default position.
I hope this info is enough for you to go on working on this bug, but if it isnt, i will be happy to assist you with a test-project for you to troubleshoot on.
Kind regards
//aloC

Antivirus to protect mac running osx and windows

I am looking for a all around anti-virus to run on my mac that will protect both osx and windows 7 running through Parallels 8

ClamWin and Microsoft Security Essentials for Windows
ClamXav for OS X, will also scan the virtual machine OS's files too.
ClamWin has found things MSE and ClamXav hasn't, good thing is Clam versions are run as you need it basically.
With your virtual machine Windows, make snapshots and only update those, keep the files and exported bookmarks on a external USB, this way you can keep the machine in a more pristine state.
Stuff can jump on Windows (and OS X too) merly connecting to the Internet when the vm starts up.
So scan, restore to snapshot, update when it's available, scan again and revert again because there is so much stuff NOT being caught.

OSX forgets window placement

Similar Messages

Maybe you are looking for