Osx lion cannot establish connection to laserjet cp1025nw

I have a new LaserJet CP1025nw. After working a couple of times I get an error message (it just says 'error') when I try to print. If I open the HP Utility the device is listed  but no details of device information are displayed. If I switch off and on the printer,  details of the device information appear, but then if I go to 'all settings' 'information and support' I get a message that the computer cannont establish a connection with the printer. It feels like connection is only established  briefly when the printer is first switched on. Connection is via ethernet. The lights on the back of the printer show the connection is OK, and I have tried changing the cable. 

Did all this twice with considerable hassle. Firmware update programme would hang. Only responded when I turned printer off and on before launching it. There are some changes in behaviour. If I try to print, I get an message that just says 'error', without referrring to the driver. The HP utility is able to report device information. At what point can I say this is broken? The amount of time I have spent trying to make it work with Lion is quite inordinate (compared with less than a minute to install my old Epson C65. My options now are to (a) return it to the vendor, always difficult with an issue of this type. Or (b) smash it to pieces with a large rock to stop me wasting any more time on it. Thanks    

Similar Messages

  • JDBC receiver error Cannot establish connection with the registered driver

    Hi Expert,
    I am constructing a proxy to JDBC scenario. And I am getting error saying "
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection with the registered driver. oracle.jdbc.driver.OracleDriver returns: The Network Adapter could not establish the connection. : SQLException: The Network Adapter could not establish the connection"
    I can get into my Oracle database using TOAD with same IP address, user name and password. Could anybody tell me what should I do? Thanks a lot!
    Charles

    Hi,
    Check with your network team, network conenction between PI and Data base not working , Network team have to open Data base system ports inorder connect PI System.
    check with Basis team about network connectivty,like they are bale to ping Data base server ip or not.
    please go through below thread,
    SQLException: Io exception: The Network Adapter could not establish the con
    regards,
    ganesh.

  • Network Adapter cannot establish connection

    Hello. I can't seem to find an answer to this anywhere: I have a database that can be accessed via JDBC from certain IP addresses but not others. The ones that can't access it give me the exeception: "Network Adapter cannot establish connection" The database machine can be PINGed from the client; the IP address of the database is used so it's not a name resolution problem; we are instatiating the driver correctly...AND it WORKS from other clients!
    Does anyone have any ideas as to what the problem could be?
    Thanks.

    If there are firewalls involved, connections on port 1521 have to be allowed.

  • Cannot establish connection - JDBC driver for MS SQL server 2000

    Hi,
    We are facing problems in connecting to SQL server 2000.
    We have installed the latest version of the driver from followin link and following
    https://websmp108.sap-ag.de/msplatforms    > SQL Server > JDBC Driver for MS SQL Server (Version 3.70.10)
    We have given the following entries in our communication channel:
    JDBC Driver : com.microsoft.sqlserver.jdbc.SQLServerDriver
    Connection:  jdbc:sqlserver://<SQLserver IP>:1433;databaseName=production_info
    Please let us know the procedure to find if the JDBC driver for SQL 2000 is installed from our SAP XI.
    ERROR DETAILS:
    Error during database connection to the database URL 'jdbc:sqlserver://<SQLserverIP>:1433;databaseName=production_info' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://<SQLserverIP>:1433;databaseName=production_info': SAPClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver'
    Please help.
    Regards,
    Rehan

    Hi Chris,
    We have used the same because we have downloaded the driver from following location
    https://websmp108.sap-ag.de/msplatforms ;   > SQL Server > JDBC Driver for MS SQL Server (Version 3.70.10)
    I have tried with both "com.microsoft.jdbc.sqlserver.SQLServerDriver"; and "com.microsoft.sqlserver.jdbc.SQLServerDriver";, but still I am facing the same error.
    Service market place has given the driver as "JDBC Driver for MS SQL Server (Version 3.70.10)", is there a way to find out if it is for 2000 or 2005?
    Thanks for your reply.
    Regards,
    Rehan

  • Why Cannot establish connection.

    Hi,
    I'm a new for weblogic and jdeveloper, and now I try to deploy FOD (http://www.oracle.com/technology/products/jdev/samples/fod/index.html) on a Linux server(Jdeveloper is running on the same server),but the connection to localhost can't be established. When I check the connection to 127.0.0.1 on port 7101, it always complains like that:
    Testing JSR-160 Runtime ... failed.
    Cannot establish connection.
    Testing JSR-160 DomainRuntime ... skipped.
    Testing JSR-88 ... skipped.
    Testing JSR-88-LOCAL ... skipped.
    Testing JNDI ... skipped.
    Testing JSR-160 Edit ... skipped.
    Testing HTTP ... success.
    Testing Server MBeans Model ... skipped.
    but the website: http://127.0.0.1:7101/console can be accessed, anyone knows why?
    Thank you.

    You are not able to establish a connection from jdev to the server right. If so you need to add an entry with the ip address and the hostname of server in the host file C:\WINNT\system32\drivers\etc\hosts.

  • Firefox cannot establish connection to server 127.0.0.1:1234

    I want to open my bank's security and it says that firefox cannot establish connection to server 127.0.0.1:1234

    I now know that a file " user.js " has been installed (probably by the Trojan) along with " user.js.BAK " in my Profiles Folder. The Support article on " user.js " says that it is never installed by default. Unless FF4 installs one (unlikely) the presence of this file explains exactly what is happening. It contains changes to the normal configuration and is read at every FF startup when it automatically transfers its content to another file in Profiles. This is " prefs.js " where all the preferences are stored. It also has a BAK file added by the Trojan: " prefs.js.BAK ".
    The above Article says these files can be read by Notepad. But mine cannot. The BAK files display pure gibberish in Notepad. The parent files cannot be opened at all. They generate a Compile error. They seem heavily protected from interference.
    Would somebody kindly tell me (1) What application normally opens BAK files; (2) Assuming I can do so, would it be OK to simply delete the user.js file and its backup?
    Even if I have to rename them first?
    With that gone, I can probably reset "prefs.js" either using "about:config" (which Preference?) or using the UI on the Tools | Advanced tab to select "No Proxy". But I am unsure about these next steps and would welcome corroboration.

  • HT5192 I cant update my mibile always i got the same message. An error occurrd during updating and sime times cannot establish connection ?!!!!

    I cant update my mibile always i got the same message. An error occurrd during updating and sime times cannot establish connection ?!!!!

    Hi Martha Leal Tapia,
    Yes this issue was resolved. I had to add the below two parameters in the instance profile and continue the installation.
    icm/server_port_1 = PROT = P4, PORT = 5$(SAPSYSTEM)04, HOST = <full hostname as in the /etc/hosts file>
    icm/host_name_full=<full hostname as in the /etc/hosts file>
    Note 1158626 P4 connection to ICM on machine with multiple IPs fails.
    You can refer following SAPnote # 609603 for the above concepts although this refers to old release."
    Thanks and regards
    Ananth

  • Whenever I try to open Firefox it says cannot establish connection, maybe your firewall is preventing us from accessing the web.

    Whenever I try to open Firefox it says cannot establish connection, maybe your firewall is preventing us from accessing the web. Even though I've let Firefox through my firewall, this message still appears. And whenever I try to redownload it, it just says installation failed. It does this with all installations... Is there something wrong with my computer? How do I fix it?

    Sometimes you only disable the user interface of security software, but the firewall or anti-virus services are still running in the background.
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Cannot establish connection (updated)

    I am trying to connect to an oracle 9.2.0.4 Database on Windows Server in shared mode through SQL Developer on Mac OS X and get only:
    Failure E/A-Exception: the network adapter could not establish the connection.
    This is my working jdbc connection string (from a linux server with tomcat):
    jdbc:oracle:thin:@(DESCRIPTION=
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=TCP)
    (HOST=xxx.yyy.de)
    (PORT=1525)
    (CONNECT_DATA=
    (SERVICE_NAME=DATABASENAME.yyy.de)
    (SERVER=shared)
    I tried this one in the advanced tab with no success (the basic settings also did not work). I have a blank OS X Installation.
    What is going wrong?
    kind regards,
    Sven
    ------------- update ------------------
    trying to start sqldeveloper manually gives the following error:
    Error: Java home /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home//bin/java is not a J2SE SDK.
    Running Oracle SQL Developer 1.0 under a JRE is not supported.
    If the Java VM specified by the SetJavaHome is actually a full J2SDK installation
    then add 'SetSkipJ2SDKCheck true' to /Users/einstein/Desktop/SQLDeveloper.app/Contents/Resources/Java/sqldeveloper/jdev/bin/sqldeveloper.conf
    I added this and SQL Developer starts (and looks the same like starting via the App Icon)
    I used a small Java program to test the jdbc connectivity:
    java -classpath .:../SQLDeveloper.app/Contents/Resources/Java/sqldeveloper/jdbc/lib/ojdbc14.jar TestConnection jdbc:oracle:thin:@xxx.yyy.de:1525:SID
    this works !
    But SQLDeveloper still cannot establish a connection ?

    I got it: the database server was not excluded in the proxy settings of the system network preferences!
    Now it works ...

  • Mac OSX lion does not connect to wifi automatically

    Hi there
    My mac osx lion does not connct to wifi automatically , or when i open the lid it doesn't connect either...
    could you please help me with this problem?

    Bump
    is there anyone else with a Mountain Lion Mac and a TP-Link TL-WDR4300? I am almost sure that it's this combination that doesn't work. All other devices I have (Apple and non-Apple) can work perfectly on 2.4Ghz and 5Ghz, but the settings on the WiFi adapter on the Mac are the same for all Wireless networks, so I just don't get why it would work on 5Ghz but not on 2.4Ghz...
    Thank you

  • OSX Lion cannot be installed on used macbook pro

    Dear all,
    I inherited an old used macbook pro (2009 model) from a colleague.  He cleaned it and it was ready to reinstall when I received it.  I purchased a new OSX Lion set to install.  As the macbook is a present for my daughters birthday, I purchased the software on het apple ID.
    When installing (after entering the related apple ID) I get the following message:
    This product is currently not available. Try again later.
    Can I solve this without having to go to an Apple dealer.  My girls birthday is this Friday, and I'd like to have the macbook ready before that date.
    Thanks!

    In order to install Lion (which all 2009 MBPs are capable of) you need to have Snow leopard (10.6.8) installed first.  The simplest path is to order this disk from Apple:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Then download the combo update:
    http://support.apple.com/kb/DL1399
    Then the MBP will be ready for a Lion install.
    Ciao.

  • OSX Lion won't connect to PS3/Xbox - ethernet

    My Macbook Pro with Lion isn't connecting to my PS3 or Xbox via ethernet. I want to be able to stream files and share my WiFi connection. I've enabled the appropriate sharing settings.
    When hooked to my PS3, when I do a 'test' connection thing the ethernet connection on my Mac displays the ethernet as 'disconnected' and then the PS3 can't assign an IP. On the Xbox, it doesn't seem to disconnect the ethernet, but it always fails during a test.
    I know it isn't my consoles as my friend connected his PC to them okay.
    I know it should be just plug and play, which is why I'm a bit confused. My Mac is connected to a weird WiFi connection (the university's - 'enterprise', or something) but I don't see why that would make a difference in just making a simple connection.
    Any advice, suggestions, anything?

    Nothing?  This is driving me insane.   I've scoured Google and an apparent fix is editing bootpd.plist after sharing is turned on, but no such file is created on my Mac (in etc or tmp).
    Someone help, please!

  • Re: OSX Lion printer problems with HP Laserjet 4200

    I have updated the driver for the HP LaserJet 4200 series printer to ver. 18.2. The computer communicates with the network, via a Linksys Wireless-G printserver, WPSM54G, and is sending something to the printer, but the printer prints only what appears to be identifying information, then raw code. Has anyone else had this problem? I use this OSX with three other printers, two of them wireless, with no problem.

    Just found an email HP Support sent to me back in January 2008, about this issue
    "Hello Hunter,
    Thank you for contacting HP Total Care.
    There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
    Your issue cannot be resolved until the 10.5 driver is developed and released.
    To sign up for an update as soon as it is available ...click on the link below:
    HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
    http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
    If you need further assistance, please reply to this message and we will be happy to assist you further.
    You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
    For information on keeping your HP and Compaq products up and running, please visit our Web site
    at:
    http://www.hp.com/go/totalcare
    Sincerely,
    Dave
    HP Total Care"
    I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

  • Cannot establish connection with Oracle database

    Hello
    This is the first time I use BOE server with Crystal Report to execute some tests, and one issue is blocking me now, and I am not even sure if this is the right Forum where I should post it.
    I installed BOE server XI 3.1 SP4 on Linux machine (new installation), and then I uploaded some existing Crystal Report templates that are working fine on another BOE server. Those CR templates have to establish a connection with a remote Oracle database to get the data, and we pass all credentials for this purpose.
    The first time I run my first test I received this error that I could not find anywhere on the web :
    ErrorLog 2011  8 10  7:05:52.505 14215 356 (Administrator:82) (../reporthandler.cpp:12462): CReportHandler::buildReportViewerError: CSResultExceFailed to open the connection." FileName:"../reporthandler.cpp" LineNum:12458 ErrorCode:756 ErrorMsg:"Failed to open the connection.
    {FBAD55EE-BEAF-11E0-BC1C-005056813A72}.rpt" DetailedErrorMsg:""
    I believe that the CR was not able to establish the connection with Oracle, so I install Oracle Client on the same machine (test remote connection ==> pass), I set the ORACLE_HOME variable, and I edit the file <installation_home>/ bobje/java/CRConfig.xml to add the path to ojdbc14.jar, and finnaly restart the tomcat server. However I am still getting the same error message.
    Is there any hint that can help me troubleshooting this issue?
    Thank you

    do the reports use native oracle connectivity or JDBC ?
    what version of Oracle client did you install ?
    was it 32bit or 64bit client ?
    what your LD_LIBRARY_PATH variable set to ?
    what does it say in the CMC when you look at CR report's DB properties ?

  • SPA2002 Cannot establish connection!!

    I have an SPA2002 behind an RVS4000 router.
    Spa2002 firmware version is 3.1.18.
    The adapter is connected to a high priority qos port. Proxy access is enabled.
    When I lift up the receiver there is a dial tone so the registration is ok, but the calls arent established.
    There are no error messages in the syslog......debug level is set to maximum.
    What is the problem? Does anybody have an idea??
    The syslog is the following:
    Jan 2 12:12:27 10.0.0.253 000E08FA1B37 [0]Off Hook
    Jan 2 12:12:33 10.0.0.253 000E08FA1B37 Calling:[email protected]:0
    Jan 2 12:12:33 10.0.0.253 000E08FA1B37 [0:0]AUD ALLOC CALL (port=16440)
    Jan 2 12:12:33 10.0.0.253 000E08FA1B37 [0:0]RTP Rx Up
    Jan 2 12:12:33 10.0.0.253 000E08FA1B37 RSE_DEBUG: reference domain:sip.voipbuster.com
    Jan 2 12:13:05 10.0.0.253 000E08FA1B37 RSE_DEBUG: getting alternate from domain:sip.voipbuster.com
    Jan 2 12:13:33 10.0.0.253 000E08FA1B37 [0]On Hook
    Jan 2 12:13:33 10.0.0.253 000E08FA1B37 [0:0]AUD Rel Call
    Jan 2 12:13:33 10.0.0.253 000E08FA1B37 RSE_DEBUG: reference domain:sip.voipbuster.com
    Jan 2 12:13:37 10.0.0.253 000E08FA1B37 RSE_DEBUG: getting alternate from domain:sip.voipbuster.com
    Jan 2 12:13:39 10.0.0.253 000E08FA1B37 RSE_DEBUG: unref domain, sip.voipbuster.com
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 CC:Clean Up
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 Sess Terminated
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 RSE_DEBUG: unref domain, sip.voipbuster.com
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 RSE_DEBUG: last unref for domain sip.voipbuster.com
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 --- OBJ POOL STAT ---
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OP:RTPRXB = 96 ( 96 192)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OP:RTPREB = 40 ( 40 48)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OP:RTPTXB = 64 ( 64 108)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OP:TIMEOU = 111 (120 40)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPIPCOR = 0 ( 1 28)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPIPCTS = 32 ( 32 568)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPIPSTS = 32 ( 32 3492)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPIPAUS = 7 ( 8 588)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPIPDLG = 10 ( 10 140)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPIPSES = 12 ( 12 8196)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPIPREG = 3 ( 4 452)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPIPLIN = 0 ( 2 140)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPUBDLG = 2 ( 2 6436)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37 OPTUNTS = 16 ( 16 68)
    Jan 2 12:14:05 10.0.0.253 000E08FA1B37
    LINE STATE DURING THE "CALL"
    Line 1 Status
    Hook State: Off Registration State: Registered
    Last Registration At: 1/2/2003 12:40:22 Next Registration In: 539 s
    Message Waiting: No Call Back Active: No
    Last Called Number: Last Caller Number:
    Mapped SIP Port:
    Call 1 State: Calling Call 2 State: Idle
    Call 1 Tone: None Call 2 Tone: None
    Call 1 Encoder: G711u Call 2 Encoder:
    Call 1 Decoder: G711u Call 2 Decoder:
    Call 1 FAX: No Call 2 FAX:
    Call 1 Type: Outbound Call 2 Type:
    Call 1 Remote Hold: No Call 2 Remote Hold:
    Call 1 Callback: No Call 2 Callback:
    Call 1 Peer Name: Call 2 Peer Name:
    Call 1 Peer Phone: 061XXXXxxxxx Call 2 Peer Phone:
    Call 1 Duration: Call 2 Duration:
    Call 1 Packets Sent: 0 Call 2 Packets Sent:
    Call 1 Packets Recv: 0 Call 2 Packets Recv:
    Call 1 Bytes Sent: 0 Call 2 Bytes Sent:
    Call 1 Bytes Recv: 0 Call 2 Bytes Recv:
    Call 1 Decode Latency: 0 ms Call 2 Decode Latency:
    Call 1 Jitter: 0 ms Call 2 Jitter:
    Call 1 Round Trip Delay: 0 ms Call 2 Round Trip Delay:
    Call 1 Packets Lost: 0 Call 2 Packets Lost:
    Call 1 Packet Error: 0 Call 2 Packet Error:
    Call 1 Mapped RTP Port: 16468 >> 0 Call 2 Mapped RTP Port:Message Edited by dlakos on 04-03-200704:52 AM

    sigh
    You get the error when doing what?
    You know by now that you need to give us more information when you ask a question, right?

Maybe you are looking for